General Information

• Commercial Name: Hermes Gold Marble
• Stone Type: Natural Marble
• Quarry Origin: Turkey
• Petrographic Type: Metamorphic crystalline limestone
• Stone Category: Luxurious decorative marble

Aesthetic Characteristics

Color: Predominantly ash grey to dark silver grey background with luxurious golden veining running in irregular patterns. Occasional lighter silver or white linear features may accentuate the dynamic contrast.

Texture: Fine- to medium-grained crystalline structure. The surface is naturally smooth and reflects light with a soft sheen when polished.

Pattern: The gold veins range from delicate hairline streaks to bold, dramatic swirls, offering a refined contrast against the grey background. The pattern is both elegant and expressive, ideal for high-end applications.

Physical and Mechanical Properties

• Water Absorption : ~0.25 – 0.40% by weight
• Bulk Density : ~2.68 – 2.72 g/cm³ (2680–2720 kg/m³)
• Porosity : Low
• Flexural Strength : ~12 – 15 MPa
• Compressive Strength : ~120 – 135 MPa
• Abrasion Resistance : Moderate
• Slip Resistance (R rating) : R9–R11 depending on finish
• Mohs Hardness : 3 – 4

Chemical Composition (% by weight)

• CaCO₃ (Calcium Carbonate) : ~94 – 97%
• MgCO₃ (Magnesium Carbonate) : 1 – 2%
• SiO₂ (Silica) : 0.3 – 0.8%
• Fe₂O₃ (Iron Oxide) : ~0.3 – 0.7%
• Al₂O₃ (Alumina) : ≤ 0.2%

Mineralogical Composition

• Calcite : 93 – 96%
• Dolomite : ~2 – 3%
• Quartz / Clays : Traces
• Iron-bearing minerals : Traces (cause of golden veining)

Available Surface Finishes

• Polished : Glossy, enhances color contrast, ideal for interiors
• Honed : Matte, refined look, lower reflectivity
• Brushed : Textured aged surface, slightly rustic
• Leathered : Soft textured feel, good for countertops and vanities
• Sandblasted : Rough matte, increases slip resistance (exteriors)

Available Sizes

Slabs:

• Standard thickness: 2 cm and 3 cm
• Slab sizes: up to 290 x 180 cm (varies by block)
• Cut-to-size

Tiles:

• 30 x 30 cm, 40 x 40 cm, 60 x 30 cm, 60 x 60 cm
• Thickness: 1.5 – 2 cm

Custom sizes for stairs, counters, wall panels, etc.

Typical Applications

• Flooring and wall cladding
• Exterior facade panels (low freeze zones)
• Vanity tops and bathroom walls
• Covered patios and shaded terraces
• Fireplace surrounds and features
• Exterior staircases (non-polished finish)
• Countertops (low-traffic use)
• Sculptures, columns, balustrades

Maintenance Recommendations

Sealing: Recommended upon installation and periodically thereafter to reduce staining risk and enhance longevity.

Cleaning: Use pH-neutral stone cleaners. Avoid acidic or abrasive chemicals.

Durability: Suitable for moderate-traffic areas indoors. For high-traffic zones, non-polished finishes are preferred.

Summary

Appearance:Elegant ash grey marble with luxurious golden veining and dramatic silver-grey tones.

Performance: Strong mechanical resistance and low water absorption.

Versatility: Suitable for high-end interior architecture, decorative features, and select outdoor use.

Design Style Match: Modern luxury, minimalist contrast, classic elegance, and boutique commercial settings.