Bridge Cutting Machine

This machine is designed for sawing slabs in an automatic program. Slabs can be placed and the machine can cut all the strips in automatic program. You can use the saw also overnight with unmanned operation because the safety features, the machine will stop automatic if: Drive belt Breach Amperage protection Water failure Trips out of a movement motor is in failure Saw Table Saw table rotating through roller bearing Base welded and powder coated Fixation points on 0-90-180-270 and a manual brake to fixate in every position. Table rotates manual Top surface equipt with wooden strips 3x1.5 m Program - The following values can be set per block: The starting point for the first cut The place where the width of the block ends, means an adjustable stop The offset for the blade thickness The number of slabs and the thickness. There are 5 different slab sizes that can be put in the program. The number of repeat is unlimited Central lubrication Automatic lubricating pump which lubricate the essential parts Castrol Olit CLS grease Electrification Suited for 400 V – 50Hz, 3 phase with 0 And earth The machine is wired completely and is equipped with a stationary control cabinet, PLC control, The motors applied are fully closed and at least comply with form of protectionIP55 and insulation class F