FLEX SINGOLO Hand Held Tile Polisher- Vertical And Horizontal

the version with speed regulation and rotation direction inversion with buttons and trimmers https://youtu.be/wJ0mdiQCCeM the version with rpm regulation and rotation inversion with display commands or remote control https://youtu.be/zewfixUwOlE the version with more powerful 500 w motor, dislpay controls and modifiable side handle https://youtu.be/Y62boq2mEeQ always the 500 w version and display commands with the modified side handle, in this case no longer lateral but a throttle type setting PATENTED TOOL FOR SANDING, POLISHING AND CRYSTALLIZING SMALL SURFACES IN MARBLE, GRANITE AND OTHER MAKES DOUBLE THAN A NORMAL FLEX NEW VERSIONS OF THE SINGLE FLEX. WITH BUTTON CONTROLS, OR WITH DISLPAY, OR WITH REMOTE CONTROL NEW PATENTED VERSION OF THE FLEX WITH ITS WATER TANK UNIQUE POSSIBILITY TO REVERSE THE DIRECTION OF ROTATION, AND ADJUST THE REVOLUTIONS. THE FACT OF BEING ABLE TO REVERSE THE SENSE OF ROTATION (NS PATENT) IS AN ABSOLUTE NOVELTY THAT ALWAYS RENEWING THE POINTS OF THE ABRASIVES OR POLISHERS SHORTEN THE PROCESSING TIMES BY AT LEAST 30% AND THE POLISH IS BETTER. SAFE, QUIET, RELIABLE, EASY TO USE, WORKING IN DIRECT CURRENT WITH ITS SUPPLIED POWER SUPPLY, WITHOUT RISK OF SHOCK IT WORKS WITH ITS WATER TANK SO ZERO DUST, BUT ALSO VERY LOW SPLASH (NOTHING UP TO 1000 RPM) SO YOU DON'T NEED TO MASK AND START WORKING IMMEDIATELY. THIS MODEL CAN STILL BE USED FOR VERTICAL WORK AS IT DOES NOT HAVE AN EXCESSIVE WEIGHT. BUT BEING HEAVIER THAN A NORMAL FLEX, IT EATS MORE. REGULATION OF TURNS FROM 80 TO 3000 AVAILABLE THE FOLLOWING VERSIONS BOTH WITH BUTTON CONTROLS AND ROTATION ADJUSTMENTS, DISPLAY, AND WITH REMOTE CONTROL: 350 W MOTOR HOLDING 100 MM PAD, TOOL WEIGHT 4.7 KG 500 W MOTOR HOLDING BACKING PAD FROM 125 TO 180 MM TOOL WEIGHT 6.3 KG AVAILABLE BOTH WITH HANDLE TYPE MANETTONE ABOVE THE ENGINE AND WITH SIDE HANDLE, WHILE THE OTHER HANDLE IS ALWAYS REAR even the model with 350 w motor which normally mounts a pad diameter 100 mm, can also be mounted up to a diameter of 150 mm for certain processes STILL OTHER MODELS OF THE SINGLE FLEX, AT THE BOTTOM OF THIS PAGE ARE THE REDUCED FLEX, AND THE SINGLE FOR VERTICAL FLEX- THE REDUCED FLEX HAS IN ADDITION TO THE REVERSAL OF THE SENSE OF ROTATION AND REGULATION OF THE SPINS, THE POSSIBILITY OF MOUNTING A LARGE DISC OF 30 (BUT ALSO 43) CM IN DIAMETER- WHILE THE FLEX PER VERTICAL IS THE LIGHTEST OF ALL FOR A USE OF THIS KIND SINGLE FLEX-ANGLE GRINDER FOR MARBLE THE VERSION WITHOUT SPEED REGULATOR FOR SANDING AND POLISHING MARBLE WITH ITS WATER TANK ON BOARD THE SINGLE FLEX IS THE VERSION WITH A SINGLE MOTOR COMPARED TO THE DOUBLE FLEX FOR SANDING AND POLISHING SMALL SURFACES WITHOUT THE MINIMUM DUST WORKS AT 24V CONTINUOUS TANK AND WATER TAP ON BOARD BACKING PAD WITH VELCRO DIAM 100 MM VERY QUIET, STURDY RELIABLE WATCH THE VIDEO https://youtu.be/GfACaVigsqY MOUNTING PAD M14 BEING LIGHTER THAN THE DOUBLE FLEX, IT IS PERFECTLY PERFECT FOR VERTICAL WORKS IT CAN ALSO WORK AT 12 V WITH CAR BATTERY THAT GIVES IT 5 HOURS OF AUTONOMY WE RECENTLY MADE THE VERSION WITH SPEED REGULATOR THAT ALLOWS TO CHANGE THE ROTATION FROM 80 TO 2800 RPM YOU CAN USE FOR EXAMPLE: 80-120 REVOLUTIONS TO CRYSTALLIZE 300-500 TO POLISH 2800 REVOLUTIONS TO SAND UP TO 1000 RPM, THE SPLASH OF WATER IS ALMOST NOTHING WATCH THE REAL VIDEO https://youtu.be/bvYtO24ehhw REDUCED FLEX https://youtu.be/Wdzx7orsNuc mounts a 30 cm diameter disc, but can also mount a 43 cm disc. thanks to its mechanical characteristics it can also withstand a very high weight on it. we can crush as much as we want so that the engine does not slow down. it has the inversion of the direction of rotation, the regulation of revolutions from 60 to 550 rpm. for these low rotations it does not dirty anything, there is no need to disguise. having a large disc and being able to apply a lot of weight is ideal for both polishing and crystallizing. its maximum speed is the optimal one for polishing with the advantage of the large diameter of the disc. for example, polishing steps with this particular tool is very easy and fast, alone without help, without dirtying anything, as even if you have to crystallize steps or other, it is the most comfortable and fastest tool for these things, thanks to its large disc. the tool like all the others works at 24v with its power supply, and has a water tank and tap on board weighs 5.7 kg SINGLE FLEX FOR VERTICAL https://youtu.be/vGzF4hZ5xq8 with the water tank in position for horizontal work always with tank for horizontal work above instead with the water tank and also the tool positioned vertically always with the tool for vertical work