Rosetta Vena Marble is a natural stone quarried in Egypt, prized for its warm and elegant color palette and refined veining.

Appearance & Aesthetic Features:

• Color: Light creamy beige base
• Shades: Accented with pale dry rose tones, adding warmth and subtle vibrancy
• Veining: Distinct dark reddish-brown veins, fine to medium in thickness, flowing linearly or with soft waves
• Texture: Smooth, fine-grained, with a homogenous base and intermittent contrasting veins
• Pattern: Subtle yet elegant, combining creamy softness with eye-catching linear movement; suitable for both modern and classic aesthetics

Technical Specifications:

• Water Absorption (ASTM C97): 1.4% (indicates moderate porosity, suitable for interior and some exterior uses with proper sealing)
• Modulus of Rupture (ASTM C99): 1,400 psi (good resistance to bending and cracking under load)
• Compressive Strength (ASTM C170): 17,300 psi (excellent load-bearing capacity for flooring, cladding, and structural applications)
• Abrasion Resistance (ASTM C241): 33.9 Ha (suitable for medium to high traffic flooring applications)
• Flexural Strength (ASTM C880): 1,000 psi (provides good resistance to breakage under flexural stress)
• Density (ASTM C97): 2,522 kg/m³ (typical of high-quality marbles)
• Porosity: Moderate (benefits from regular sealing to prevent staining)
• Slip Resistance:

        - oned/Brushed: Medium slip resistance

        - Polished: Low slip resistance (suitable for dry interiors)

        - Sandblasted/Antiqued: High slip resistance (suitable for wet or outdoor areas)

• Hardness: Medium (Mohs scale ~3) (suitable for general indoor use but may scratch under heavy impact or abrasion)

Chemical Composition (% by weight):

(Approximate, based on typical Egyptian marble profiles)

• CaCO₃ (Calcium Carbonate): ~95–97%
• MgCO₃ (Magnesium Carbonate): ~1–2%
• SiO₂ (Silicon Dioxide): <1%
• Fe₂O₃ (Iron Oxide): ~0.5–1%
• Other Minerals: <0.5% (alumina, manganese, organic compounds)

Mineralogical Composition (% by weight):

• Calcite: 95–97%
• Quartz: ~1%
• Clay Minerals/Micas: ~0.5–1%
• Iron Oxides & Others: ~1–2%

Applications:

Interior

• Flooring & Wall Cladding
• Bathroom Vanities & Shower Walls
• Kitchen Backsplashes (not recommended for countertops without sealing)
• Staircases
• Fireplace Surrounds
• Hotel Lobbies, Reception Desks, and Feature Walls

Exterior

• Facades (with sealing and proper anchoring)

Cutting Sizes (cm):

Standard Slabs:

• 240 x 120 cm
• 260 x 150 cm

Tile Formats:

• 30 x 30 cm
• 30 x 60 cm
• 60 x 60 cm
• 60 x 120 cm
• Custom sizes available upon request

Thicknesses:

• 2 cm (standard)
• 3 cm (for structural or countertop use)

Available Surface Finishes:

• Polished: High gloss for luxury interiors
• Honed: Matte, smooth finish for subtle elegance
• Brushed: Aged texture with softened edges
• Antiqued / Tumbled: Rustic appearance for classical or Mediterranean styles
• Sandblasted: Rougher texture for outdoor or anti-slip areas
• Leathered: Soft textured finish for a modern, tactile surface

Maintenance Recommendations:

• Sealing: Recommended every 6–12 months depending on use (especially in wet or high-traffic areas)
• Cleaning: Use pH-neutral stone cleaners; avoid acidic or abrasive products
• Stain Protection: Prompt cleaning of spills (especially oil or wine) to prevent staining
• Polishing: Periodic re-polishing may be required in high-traffic or commercial settings