Artificial Stone Single Disc Cutting Machine in Lebanon

General characteristics:
The SNM-DM is a heavy-duty high precision mono-bloc cutting machine suitable for all factories working in the stone industry. When equipped with the suitable tooling it is capable of working marble, granite, cement etc... It is easy to handle and maintenance free.
All guide ways are in hard chrome.
The main structure is made of heavy-duty steel in order to insure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates that are machined on three sides.
The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
The table slide ways are hardened and work in oil.
The replacement of slide ways is quick and inexpensive and enables this machine to keep its accuracy indefinitely.
Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0° to 45°.
The driving systems inside gears are case hardened before final grinding.
The machine is equipped with an insulated electric panel.
All components are mass-produced, safe and of high quality.
The machine has very low maintenance costs.
Optional features:
Electrical vertical, horizontal and lateral displacements: An articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, a potentiometer to control the advancing speed for both cutting directions.
Profiling: The machine can be equipped with a laser device for a very precise copying of profiles.
The machine can be equipped with 2 diamond blades, which is a great advantage when profiling.

General Characteristics
The SNM-CCE is a mono-block crosscutting machine with a single diamond blade that transforms slabs cut on the block-cutter into tiles of desired length.
The main structure is made of heavy-duty steel, and the disk is directly mounted on the motor.
A brushless AC motor with inverter powers the forward and return movements of the head.
When cutting the last few millimeters, the machine will automatically reduce its speed in order to guarantee a perfect edge.
Electric cables and tubes for tool cooling are supported by nylon cable holding chains.

General Characteristics
The SNM-CCE is a mono-block crosscutting machine with a single diamond blade that transforms slabs cut on the block-cutter into tiles of desired length.
The main structure is made of heavy-duty steel, and the disk is directly mounted on the motor.
A brushless AC motor with inverter powers the forward and return movements of the head.
When cutting the last few millimeters, the machine will automatically reduce its speed in order to guarantee a perfect edge.
Electric cables and tubes for tool cooling are supported by nylon cable holding chains.