Artificial Stone Tile Trimming Machine in Italy

MRF is the new automatic trimmer for cutting in a single movement marble, granite, natural stone and ceramic.
The trimming machine is composed of a conveyor belt and two discs with adjustable trimming sizes, in width and in height, by a manual handwheel.
To optimize cutting, according to the thickness and type of material to be processed, the speed of the conveyor belt can be adjusted through the variator.
The MRF is also equipped with a lateral guidance system and upper pressure that allows you to guide the material in the cutting phase, ensuring quality production, low operating costs with minimal space and the use of unskilled personnel, thanks to the ease of use.

The V-Groove edge polishing machine makes double miter-cuts (45°) in a single pass, this way the two parts perfectly glued together in 90°. The miter-cutting is performed with the polishing side of the working piece on the conveyor belt.

MTP are automatic machines for multiple linear cutting with diamond discs.
Suitable for cutting ceramic tiles of any kind, marble, granite, glass and bricks.
MTP 500/700/950/1300/1600/2200 differentiate from each other for the width of the relevant conveyor belt and can be delivered with two or three cutting heads, to allow the choice of the most appropriate type according to the quantities or the sizes to be cut.
An essential characteristic of the MTPs is the fact that the disc support shaft is stable and doesn't vibrate as it is fastened on both sides. The lack of vibrations guarantees the excellent quality of the cut made.
With two disc support heads, the first is used to perform the pre-cut and the second the cut, thus achieving high production speeds with excellent finish results.
With three heads, on the other hand, there are certain advantages,
1) by using the second head you can chamfer by fitting chamfering discs shaped at 90°, thus obtaining a complete cut with superior chamfering.
2) by carrying out two pre-cuts with the first and second heads and the final cut with the third you get higher production and the possibility to cut thicknesses off up to 25/30 mm on materials such as granite or porcelain stoneware without drastically slowing down the cutting speed.
As the frame is the same length for all models it is in any case possible to subsequently fit the third head onto the 2-head cutting machine.
Thanks to their very sturdy structure, the MTPs can be fitted with motors with power up to 22kw with special tools for cutting mosaics automatically up to sizes of 10x10 mm.

MTP 1300-1600-1900-2200/3 - BIG SIZES CUTTING MACHINES

MRY machine makes incisions on the board of materials of gres porcelain, agglomerated, granite, marble and terrace allowing the insertion of supporting clips for the ventilated facades.

MRY machine makes incisions on the board of materials of gres porcelain, agglomerated, granite, marble and terrace allowing the insertion of supporting clips for the ventilated facades.

The V-Groove edge polishing machine makes double miter-cuts (45°) in a single pass, this way the two parts perfectly glued together in 90°. The miter-cutting is performed with the polishing side of the working piece on the conveyor belt.