Basalt Finishing, Profiling Machines in Ukraine

https://kasco.group
“SPRINT” - compact engraving machine, with a working area of 40 x 62 cm.
Portable, installed on the workpiece to be machined. Small size tiles can be installed inside the machine.
Application unspecified image on flat hard surface by impact engraving method.
- High speed engraving of high quality
- Automatic noncontact system of keeping of working clearance
- Machine control panel on your Android device
- Capability of off - line operation
- Full - function studio of projects EngravingStudio™ (for ОС Windows ®) preparation
- Attachment interfaces: USB, Wi - Fi
Customary high quality and reliability of produced machines
The application area of this equipment is quite wide: ranging from ritual business to artistic finish and fabrication of picturesque elements.
https://kasco.group

https://kasco.group
“SPRINT” - compact engraving machine, with a working area of 40 x 62 cm.
Portable, installed on the workpiece to be machined.
Small size tiles can be installed inside the machine.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.
https://kasco.group

“NEXT” - stationary engraving machine, with a working field of 101 X 50cm.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.

“MAX” - stationary engraving machine, with a working field of 140 X 70 cm.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.

“GRAND” - stationary engraving machine, the largest in the series, the working area - 160 x 100 cm.
Provides maximum comfort in work thanks to the dimensions of the working area.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.

“GRAND” - stationary engraving machine, the largest in the series, the working area - 160 x 100 cm.
Provides maximum comfort in work thanks to the dimensions of the working area.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.