Basalt Gantry Crane, Overhead Cranes

With the DRC-J and DRC-JT(S) radio control systems, crane control is safe and convenient. The basic structure of the two control systems is almost identical: A bright and high-contrast two-colour display provides information on the crane’s current operating statuses using easy-to-understand symbols. Cranes and hoists can be intuitively controlled by means of two joysticks. These allow the operator to control the crane without taking their eyes off the crane and the load. Additional pushbuttons can be used for optional programmable special functions.
DRC-J is the basic control system. The ‘T’ extension is a model specifically designed for tandem crane operation. The DRC-JTS variant also offers the possibility to incorporate a key-operated safety switch (‘S’) between the two joysticks for switching on and off.

A simple switch to improve safety and reliability
The simplicity of the user interface provided by DRC-JT(S) makes it possible for the crane operator to safely switch between single crane operation (crane selector switch: A or B) and tandem crane operation (crane selector switch: A+B) using a selector switch. As soon as the system needs to be switched from single crane control to tandem crane control, one of the two controllers needs to be logged off. With the main transmitter, the operator can now control both cranes with up to four trolleys. A simple turn of the selection switch safely switches control over to tandem mode. In connection with a DRC-DR D3 receiver, the DRC-JT(S) control concept satisfies the requirements of standard EN 13849-1: Cat. 3, PL “d” for safety-related parts of controls.
Safe, by Demag – SafeControl
The Demag SafeControl concept ensures that the switchover between single crane and tandem crane control is performed as a safe process. This process fundamentally includes just two control steps. First, one transmitter is logged off. In the second step, the remaining transmitter takes over the control function of the cranes. This process is interactively controlled by the SafeControl units of both cranes. In this way, a technical fault or a crane operating error can be prevented from causing any unintended change in the operating mode.
The Demag StatusBoard shows the current operating statuses of the cranes – visible from the distance on the crane girder. The crane operator can see at all times which crane and/or trolley is selected, which individual or total loads are transported, and which assistance and convenience functions are activated. Moreover, error messages, information messages and service data are visualised.
Ergonomics & function
Visible
Bright, high-contrast display to show operating statuses, load information and charge level, etc.
Two-colour display: neutral and red
Optional large Demag StatusBoard display provides information on the crane operation using easy-to-understand symbols
Precise
For long/cross travel: Mechanical latch at slow speed (V1)
Ergonomic
Joysticks for intuitive crane control
Left: forward/reverse long travel and left/right cross travel
Right: lift/lower load
Safe
Ribs to prevent accidental actuation
Optional key-operated safety switch (Cat. 3, PL “d” acc. to EN 13849-1)
Intuitive
Intuitive communication between crane and operator through ergonomic control elements
Shaped
Ergonomic grips for fatigue-free operation
Robust
Tough housing made of polyamide with a smooth, scratch-resistant surface
Battery charge & productivity
The DRC-J and DRC-JT(S) radio transmitters are part of the Demag D3 generation of radio equipment. That means they offer all the benefits of these radio systems:

Endurance
Optimised power management: Hardware design with low-energy chipsets
HF transmission for low power consumption
NiMH battery technology
The result: 2.5 hours of charging for 5 days of continuous operation
Safety
DRC-JT(S): switchover between single crane and tandem crane control as a safe process
D3 systems satisfy the requirements of the DIN EN 13849-1 machine safety standard Cat. 3, PL “d”

Wimac Crane Turkey to serve you for any handling equipments since has been founded.
- Wimac Double Girder EOT Crane Turkey
- Wimac Gantry Crane Turkey
- Wimac Electrical Crane Turkey

With the DSC-3, DSC-5 or DSC-7 control pendants, users literally have hands-on control of Demag DC chain hoists. DSC-5 is much more compact than previous control pendants designed for controlling two motion axes (lifting and cross travel). DSC5 and DSC7 control pendants fit well in the user’s hand and allows both left and right-handed operators to control the hoist safely, reliably and intuitively, both with and without gloves. Single-handed control also makes it possible for the operator to manipulate the load with a free hand at the same time.
The benefits at a glance
One-hand operation - allows simultaneous handling of the load with the other hand
DSC-5: 2-axis control pendant for 2-axis operation
Ergonomic: low actuation forces enable fatigue-free operation
Directional stickers are covered and protected by transparent hard plastic caps
Modern design
Easy installation thanks to proven plug-in connection
Wear and impact-resistant housing
Clear switching points
Safe 24 V low-voltage design
Technical details
High resistance to impacts, abrasion resistance
IP65 enclosure
Largely resistant to aggressive media (fuels, oils, greases, salt water, cooling lubricants, diluted lyes)
Resistance to ageing and UV light of the housing parts
Use in enclosed rooms and outdoors
Operating temperature range: –20°C to +60°C (storage: -25° to +70°C)

Gantry Crane, Overhead Cranes

APOLLO C1-10PB - 10 pushbuttons 1 step, w/EMS stop button,100M
System Features:
●Modular design allows for easy upgrade to different models, unnecessary prime cost be reduced.
●European standard switches inside, high sensitivity, long life with gold-plated connectors.
●Anti-water/shock/dust PA/PC case, suitable for the worst environment with international standard EMS button on the top.
●Internal antenna design both in transmitter & receiver, avoid the possibility of brake.
●Easy function-setting by PC.
●Enclosure as IP67, easy installation.
Transmitter specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Transmitting power：<10mW
Antenna：Internal type, impedance as 50Ω
Security codes：256 sets
Operation temperature：-10°C ~ +75°C
Enclosure：IP65
Source voltage：4×AA(1.5V)alkaline batteries or nickel rechargeable batteries
∴custom-made Stickers is available on demand
Receiver specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Antenna：Internal type, impedance as 50Ω
HF sensitivity：-119 dBm
Relay：10A, 250VAC
Operation temperature：-10°C ~ +75°C
Enclosure：IP67
Source voltage：110/220/380/415VAC, 50 / 60Hz (Standard)
Consumption：<12W
Size：204 X 121 X 65 mm (Box.1.1) , 270x 140 x 120 mm (BOX2.1)

APOLLO C1-4PB 4 pushbuttons 1 step, w/EMS stop button,100M
System Features:
●Modular design allows for easy upgrade to different models, unnecessary prime cost be reduced.
●European standard switches inside, high sensitivity, long life with gold-plated connectors.
●Anti-water/shock/dust PA/PC case, suitable for the worst environment with international standard EMS button on the top.
●Internal antenna design both in transmitter & receiver, avoid the possibility of brake.
●Easy function-setting by PC.
●Enclosure as IP67, easy installation.
Transmitter specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Transmitting power：<10mW
Antenna：Internal type, impedance as 50Ω
Security codes：256 sets
Operation temperature：-10°C ~ +75°C
Enclosure：IP65
Source voltage：4×AA(1.5V)alkaline batteries or nickel rechargeable batteries
∴custom-made Stickers is available on demand
Receiver specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Antenna：Internal type, impedance as 50Ω
HF sensitivity：-119 dBm
Relay：10A, 250VAC
Operation temperature：-10°C ~ +75°C
Enclosure：IP67
Source voltage：110/220/380/415VAC, 50 / 60Hz (Standard)
Consumption：<12W
Size：204 X 121 X 65 mm (Box.1.1) , 270x 140 x 120 mm (BOX2.1)

System Features:
●Modular design allows for easy upgrade to different models, unnecessary prime cost be reduced.
●European standard switches inside, high sensitivity, long life with gold-plated connectors.
●Anti-water/shock/dust PA/PC case, suitable for the worst environment with international standard EMS button on the top.
●Internal antenna design both in transmitter & receiver, avoid the possibility of brake.
●Easy function-setting by PC.
●Enclosure as IP67, easy installation.
Transmitter specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Transmitting power：<10mW
Antenna：Internal type, impedance as 50Ω
Security codes：256 sets
Operation temperature：-10°C ~ +75°C
Enclosure：IP65
Source voltage：4×AA(1.5V)alkaline batteries or nickel rechargeable batteries
∴custom-made Stickers is available on demand
Receiver specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Antenna：Internal type, impedance as 50Ω
HF sensitivity：-119 dBm
Relay：10A, 250VAC
Operation temperature：-10°C ~ +75°C
Enclosure：IP67
Source voltage：110/220/380/415VAC, 50 / 60Hz (Standard)
Consumption：<12W
Size：204 X 121 X 65 mm (Box.1.1) , 270x 140 x 120 mm (BOX2.1)

APOLLO C1-8PB : 8 pushbuttons 1 step, w/EMS stop button,100M
System Features:
●Modular design allows for easy upgrade to different models, unnecessary prime cost be reduced.
●European standard switches inside, high sensitivity, long life with gold-plated connectors.
●Anti-water/shock/dust PA/PC case, suitable for the worst environment with international standard EMS button on the top.
●Internal antenna design both in transmitter & receiver, avoid the possibility of brake.
●Easy function-setting by PC.
●Enclosure as IP67, easy installation.
Transmitter specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Transmitting power：<10mW
Antenna：Internal type, impedance as 50Ω
Security codes：256 sets
Operation temperature：-10°C ~ +75°C
Enclosure：IP65
Source voltage：4×AA(1.5V)alkaline batteries or nickel rechargeable batteries
∴custom-made Stickers is available on demand
Receiver specifications :
Frequency range：FSK868Mhz(20CH) , FSK433MHz(20CH) , FSK418Mhz(40CH)
Frequency controlled by：Quartz crystals
Antenna：Internal type, impedance as 50Ω
HF sensitivity：-119 dBm
Relay：10A, 250VAC
Operation temperature：-10°C ~ +75°C
Enclosure：IP67
Source voltage：110/220/380/415VAC, 50 / 60Hz (Standard)
Consumption：<12W
Size：204 X 121 X 65 mm (Box.1.1) , 270x 140 x 120 mm (BOX2.1)

REFERENCE

108 031 025 MACHINE FLAG MURAL ARM DONATI
FEATURES
TURN 180º
250 KG AND 500 KG OF ELEVATION
ELEVATION AUTOMATIC BY BUTTON
LONG ARM 4 AND 5 MT
EIGHT UNITS AVAILABLE.

Gantry Crane, Overhead Cranes

With the DSC-3, DSC-5 or DSC-7 control pendants, users literally have hands-on control of Demag DC chain hoists. DSC-5 is much more compact than previous control pendants designed for controlling two motion axes (lifting and cross travel). DSC5 and DSC7 control pendants fit well in the user’s hand and allows both left and right-handed operators to control the hoist safely, reliably and intuitively, both with and without gloves. Single-handed control also makes it possible for the operator to manipulate the load with a free hand at the same time.
The benefits at a glance
One-hand operation - allows simultaneous handling of the load with the other hand
DSC-5: 2-axis control pendant for 2-axis operation
Ergonomic: low actuation forces enable fatigue-free operation
Directional stickers are covered and protected by transparent hard plastic caps
Modern design
Easy installation thanks to proven plug-in connection
Wear and impact-resistant housing
Clear switching points
Safe 24 V low-voltage design
Technical details
High resistance to impacts, abrasion resistance
IP65 enclosure
Largely resistant to aggressive media (fuels, oils, greases, salt water, cooling lubricants, diluted lyes)
Resistance to ageing and UV light of the housing parts
Use in enclosed rooms and outdoors
Operating temperature range: –20°C to +60°C (storage: -25° to +70°C)

Single-Girder Electric Hoists
Low-headroom hoists
Low-headroom hoists are perfect for using in the small under-beam space in single-girder cranes.
Choose between flat or angled wheels to suit your bottom flanges and running profile, to improve performance and increase the life of your hoist.
Low Headroom single girder hoists
Standard-headroom hoists
Our standard-headroom hoists are the perfect solution when the amount of space under your single-girder crane is not critical, or when you are moving loads between halls.
This configuration is suitable for 1/1 and 2/2 reeving hoists.
Choose between flat or angled wheels to suit your bottom flanges and running profile, to improve performance and increase the life of your hoist.
Normal headroom single girder electric hoists
Standard-headroom hoists ready for curves
This hoist is designed for applications that involve moving loads along paths with turns and changes of direction.
Choose between flat or angled wheels to suit your bottom flanges and running profile, to improve performance and increase the life of your hoist.
Normal headroom single girder electric hoists ready for curves
Double-Girder Electric Hoists
Compact hoists
GH compact hoists are the most compact double-girder hoists available today. Their simple yet robust design makes them ideal for multiple applications that require a compact hoist.
Compact double girder electric hoists
Hoists on end carriages
GH manufacturers a number of hoists that are designed for trolleys with two hoists, rotating trolleys, and other applications that involve end carriages.
Available options include a manual brake release, weighing system and additional safety brake.
Double girder electric hoists on end carriage
Nested hoists
Our nested double-girder hoist is ideal when little space is available between the top of the girders and your roof. We design the trolley to place the hoist between the girders.