Limestone CNC Diamond Wire Shaping Machine in Lebanon

The technology:
Wire cutting machines are increasingly used for block cutting, mainly in hard stone, and for automatic cutting of curved shapes ( profiling and contouring ). They are based on a system of axes, each with a specific function. Each machine is equipped with a PC-based CNC which runs all system operations and manages the axes movements.
Main benefits of wire cutting:
Although tool costs for wire machines are still currently greater than those for the cutting wheel, the signs are reversed in terms of energy cost: wire machines have distinctly lower power consumption and the high cutting speed also partly compensates for the higher tool costs.
Because the wire is constantly in contact with the stone to be cut, the speed advantage is up to 30 percent depending on the material and the wire condition.
Types of wire cutting machines:
Our range of wire cutting machines includes 4 types:
The 2-axis
The 2-axis jumbo
The 4-axis
The 6-axis
Axis X: horizontal trolley movement
Axis Y and V: vertical independent movements for the columns
Axis B: 360-degrees rotating table
Axis C and Q: rotating heads
The 2 and 4 axis models will provide the same cutting and contouring possibilities but the 4-axis works faster.
The main advantage of the 6-axis model is that it can cut helicoidal, conical and asymmetrical shapes thanks to its fully computerized 6 axis ECS CNC system which controls 6 brushless AC servo motors.
Features:
A PC-based CNC operates the entire system and manages the axes movements. The general management program includes fixed cycles and special executions. The input of data is very easy and the system allows for a graphic simulation of the profile,also showing the path of the tool. The starting point of the operations is from a block with automatic repositioning and the resolution of the tangential connections is done automatically. A RS-232 connector and a printer plug are installed on board.
The inverter allows for a variety of wire speeds and the cutting of both marble and granite at optimum speeds.
Pneumatic wire tensioning system
CAD-CAM Alphacam
The wheel covers are made of aluminum composite panels and their structure is stainless steel. The stainless steel strip around the wheels prevents the diamond rope from getting tangled in the wheel in case it breaks.
All covers are in stainless steel.
The guides on the column are in stainless steel, hardened and then covered with hard chrome.
All axes are equipped with high precision ball-screw assembly

The technology:
Wire cutting machines are increasingly used for block cutting, mainly in hard stone, and for automatic cutting of curved shapes ( profiling and contouring ). They are based on a system of axes, each with a specific function. Each machine is equipped with a PC-based CNC which runs all system operations and manages the axes movements.
Main benefits of wire cutting:
Although tool costs for wire machines are still currently greater than those for the cutting wheel, the signs are reversed in terms of energy cost: wire machines have distinctly lower power consumption and the high cutting speed also partly compensates for the higher tool costs.
Because the wire is constantly in contact with the stone to be cut, the speed advantage is up to 30 percent depending on the material and the wire condition.
Types of wire cutting machines:
Our range of wire cutting machines includes 4 types:
The 2-axis
The 2-axis jumbo
The 4-axis
The 6-axis
Axis X: horizontal trolley movement
Axis Y and V: vertical independent movements for the columns
Axis B: 360-degrees rotating table
Axis C and Q: rotating heads
The 2 and 4 axis models will provide the same cutting and contouring possibilities but the 4-axis works faster.
The main advantage of the 6-axis model is that it can cut helicoidal, conical and asymmetrical shapes thanks to its fully computerized 6 axis ECS CNC system which controls 6 brushless AC servo motors.
Features:
A PC-based CNC operates the entire system and manages the axes movements. The general management program includes fixed cycles and special executions. The input of data is very easy and the system allows for a graphic simulation of the profile,also showing the path of the tool. The starting point of the operations is from a block with automatic repositioning and the resolution of the tangential connections is done automatically. A RS-232 connector and a printer plug are installed on board.
The inverter allows for a variety of wire speeds and the cutting of both marble and granite at optimum speeds.
Pneumatic wire tensioning system
CAD-CAM Alphacam
The wheel covers are made of aluminum composite panels and their structure is stainless steel. The stainless steel strip around the wheels prevents the diamond rope from getting tangled in the wheel in case it breaks.
All covers are in stainless steel.
The guides on the column are in stainless steel, hardened and then covered with hard chrome.
All axes are equipped with high precision ball-screw assembly