Marble Factory Cleaning Equipments in Spain

The dry marble extraction cabinets (without water curtain) are a great advance in the capture and elimination of dust in dry manufacturing processes.
It is a more comfortable alternative to maintain in front of the traditional water curtains. The water cabins need more maintenance and the periodic change of the filters, which ends up not being done after a period of time. This causes the filter to clog and not work properly. On the other hand, the water tank can cause problems for not cleaning them properly, such as legionella, etc.
Dry marble vacuuming has greater suction power, significantly reduces maintenance problems for water curtains, and does not have the problems derived from poorly recycled water or unchanged filters.
The dust is sucked in through the front holes of the booth by means of a powerful suction system. The dust is captured in the inner textile sleeves.
A programmable self-cleaning system causes a short reverse cycle to be generated and these textile sleeves vibrate and the dust falls by gravity to the lower drawers. These drawers are easily emptied when full.
They are manufactured in any size, depending on the number of operators who will work within them. For example, those of 2 and 3m would be for one person, 4m for two people, 6m for three people.

Sludge bagging machines Hersen Eco-10
The sludge filtering equipment serves to filter and reduce the concentration of sludge in the basins that receive and store the water that the machines need to work.
The equipment carries the electrical panel to carry out the stops and starts based on the levels detected by the sensors that are installed in the basin and in the upper part of the equipment. In this way the pump starts or stops automatically, without the need to control the levels.
The suction pump is installed in the basin that receives the flow from the machines. From this position, the dirty water is pumped to the equipment which, by gravity, falls into the bags and a large part of the mud is retained. The cleanest water falls to the lower tray of the equipment and passes to the next basin destined to collect and store the clean water.
Built in stainless steel with independent stopcocks for each bag and self-suction pump in cast iron casing.

WATER AND AIR FILTER SYSTEM
FILTEREVO
Water filtration systems recycle the water used in stone processing. They help to significantly reduce costs, ensure sufficient quality of the recycled water and enable environmentally friendly operation.
Air cleaning systems are designed to filter 99% of the air in dusty work areas.
The suction cabin of the dry filter system is designed to filter the air in dusty work areas without the need for water and with low noise levels. The filtration system can be adjusted to the type of dust.
The water suction system is a conventional air cleaning system that uses water to moisten the dust during the cleaning process, trapping it in its entirety.

WATER AND AIR FILTER SYSTEM
FILTEREVO
Water filtration systems recycle the water used in stone processing. They help to significantly reduce costs, ensure sufficient quality of the recycled water and enable environmentally friendly operation.
Air cleaning systems are designed to filter 99% of the air in dusty work areas.
The suction cabin of the dry filter system is designed to filter the air in dusty work areas without the need for water and with low noise levels. The filtration system can be adjusted to the type of dust.
The water suction system is a conventional air cleaning system that uses water to moisten the dust during the cleaning process, trapping it in its entirety.

Sludge bagging machines Hersen Eco-10
The sludge filtering equipment serves to filter and reduce the concentration of sludge in the basins that receive and store the water that the machines need to work.
The equipment carries the electrical panel to carry out the stops and starts based on the levels detected by the sensors that are installed in the basin and in the upper part of the equipment. In this way the pump starts or stops automatically, without the need to control the levels.
The suction pump is installed in the basin that receives the flow from the machines. From this position, the dirty water is pumped to the equipment which, by gravity, falls into the bags and a large part of the mud is retained. The cleanest water falls to the lower tray of the equipment and passes to the next basin destined to collect and store the clean water.
Built in stainless steel with independent stopcocks for each bag and self-suction pump in cast iron casing.