Onyx Multi Blade Gang Saw in Turkey

DIAMOND GANGSAW
40 DIAMOND GANGSAW CUTTING FIXED MARBLE BLOCK BY LOWERING BLADES
70 DIAMOND GANGSAW CUTTING FIXED MARBLE BLOCK BY LOWERING BLADES
80 DIAMOND GANGSAW CUTTING FIXED MARBLE BLOCK BY LOWERING BLADES
80 DIAMOND GANGSAW CUTTING MARBLE BY RAISING THE BLOCK

Maximum block dimensions mm 3200 uz. * 2000 yük * 2000 gen.
Blade run mm 800 mm
Stroke per minute no 95
Maximum cutting speed cm/min 60cm/dk
Blade lenght mm 4300 cm
Cutting and fast motor power kw 7.5 kW
Main motor power kw 110 kW
Total electric consumption kw 122 kW
Total water consumption l/min 800lt/dk
Weight Kgs 53000 kg

KT-80 designed on block lifting principle, enables to achieve of the max productivity in marble sawing. KT-80 guarantees the required stability and a constant standard in the quality of the finished product. KT-80 has rectilinear, long run motion, for fast cutting and lower diamond consumption

A robust blade frame allows the tensioning of the diamond blades upto 12 tons each. The blade frame is the fixed position type and moved by a double connecting rod, while the block trolley installed on a platform rises towards to the blades.

Movement of platform is provided by big screws(90mm. dia.) which are moved by a transmission group based on four angular reduction units and a central operations group, this group commands fast movement and variable speed movements of the platform.

The platform guided on four slideways, two sidesare V shaped prismatic slides, other two sidesare in contact with flat slides. Slidesare made of stainless steel and interchangeable. Specially manufactured steel connectingrod slightened by machine tools, free from weld in order to ensure a very high resistance for dynamic stresses.

An electrical motor through a belt transmission, moves a big cast iron flywheel (diameter of 3.5m and 9 tons) which fixed on the main axle, drives two cranks connected to blade frame.

Blade frame is completes its motion by a specially designed system by SERMAK which consist of articulated pendulums. This system has strong bearings and bearing friction losses are minimized. Machine can be supplied with hydraulic blade tensioner.

KT 80 is controlled by a PLC (programable logic control) system with a 10 inch Touch Screen color panel for managing to synchronize all the processing parameters by easy interface and operator controls.

All of electrical components made of high qualitycomponents by following EEC standards. Main motor has electronic soft starting system to reduce mechanical impacts on start up.

Özteknik Makine manufactures OZKM80 gang-saw, equipped with maximum 80 diamond blades, to transform a stone block to many slabs simultaneously and efficiently.
Özteknik Makine’s OZKM80 gang-saws employ components that are carefully designed to transfer the movement to the blade rack, flywheel and the connecting rods. The 3.5 meter flywheel is of cast iron, and guarantees a constant cutting speed. Flywheel drive shaft, produced from steel, and two cast iron supports and two spherical roller bearings on both sides ensure the flywheel’s continuous motion.
The blade holder, or blade rack, is made of steel plates joined solidly together, and slides on straight articulated guides that require little to no maintenance.
Two cranks on the flywheel driveshaft drive the two connecting rods that transfers the movement to the blade rack. The connecting rods are made out of machined steel monoblock. With this way, power and thrust is transferred to the blade holder via two rods instead of one. In addition, any risk of deviation in the movement of blade holder is therefore removed.

Maximum block dimensions mm 3200 uz. * 2000 yük * 2000 gen.
Blade run mm 800 mm
Stroke per minute no 95
Maximum cutting speed cm/min 60cm/dk
Blade lenght mm 4300 cm
Cutting and fast motor power kw 7.5 kW
Main motor power kw 110 kW
Total electric consumption kw 122 kW
Total water consumption l/min 800lt/dk
Weight Kgs 53000 kg

DIAMOND GANGSAW
40 DIAMOND GANGSAW CUTTING FIXED MARBLE BLOCK BY LOWERING BLADES
70 DIAMOND GANGSAW CUTTING FIXED MARBLE BLOCK BY LOWERING BLADES
80 DIAMOND GANGSAW CUTTING FIXED MARBLE BLOCK BY LOWERING BLADES
80 DIAMOND GANGSAW CUTTING MARBLE BY RAISING THE BLOCK

Özteknik Makine manufactures OZKM80 gang-saw, equipped with maximum 80 diamond blades, to transform a stone block to many slabs simultaneously and efficiently.
Özteknik Makine’s OZKM80 gang-saws employ components that are carefully designed to transfer the movement to the blade rack, flywheel and the connecting rods. The 3.5 meter flywheel is of cast iron, and guarantees a constant cutting speed. Flywheel drive shaft, produced from steel, and two cast iron supports and two spherical roller bearings on both sides ensure the flywheel’s continuous motion.
The blade holder, or blade rack, is made of steel plates joined solidly together, and slides on straight articulated guides that require little to no maintenance.
Two cranks on the flywheel driveshaft drive the two connecting rods that transfers the movement to the blade rack. The connecting rods are made out of machined steel monoblock. With this way, power and thrust is transferred to the blade holder via two rods instead of one. In addition, any risk of deviation in the movement of blade holder is therefore removed.

KT-80 designed on block lifting principle, enables to achieve of the max productivity in marble sawing. KT-80 guarantees the required stability and a constant standard in the quality of the finished product. KT-80 has rectilinear, long run motion, for fast cutting and lower diamond consumption

A robust blade frame allows the tensioning of the diamond blades upto 12 tons each. The blade frame is the fixed position type and moved by a double connecting rod, while the block trolley installed on a platform rises towards to the blades.

Movement of platform is provided by big screws(90mm. dia.) which are moved by a transmission group based on four angular reduction units and a central operations group, this group commands fast movement and variable speed movements of the platform.

The platform guided on four slideways, two sidesare V shaped prismatic slides, other two sidesare in contact with flat slides. Slidesare made of stainless steel and interchangeable. Specially manufactured steel connectingrod slightened by machine tools, free from weld in order to ensure a very high resistance for dynamic stresses.

An electrical motor through a belt transmission, moves a big cast iron flywheel (diameter of 3.5m and 9 tons) which fixed on the main axle, drives two cranks connected to blade frame.

Blade frame is completes its motion by a specially designed system by SERMAK which consist of articulated pendulums. This system has strong bearings and bearing friction losses are minimized. Machine can be supplied with hydraulic blade tensioner.

KT 80 is controlled by a PLC (programable logic control) system with a 10 inch Touch Screen color panel for managing to synchronize all the processing parameters by easy interface and operator controls.

All of electrical components made of high qualitycomponents by following EEC standards. Main motor has electronic soft starting system to reduce mechanical impacts on start up.