Quarry Crusher

This mechanical product is mainly used for stone crushing.

This mechanical product is mainly used for stone crushing.

This mechanical product is mainly used for stone crushing.

Impact crushers are named after the method they use in reducing larger blocks of rocks to smaller grain sizes.

Mobile jaw crusher use as the primary crushing, can easily move from one place to another,widely use in waste construction crushing.

Moible cone crusher

1.Higher capacity
2.Good output shape
3.Easy transfer

Ref.: 62
Impact Crusher for reducing the amount of stone slab waste at the sawmill. It uses the impact force of rotating hammers in a horizontal shaft. Can be installed as an automatic system. It increases the speed in clearing the machine\'s conveyors. Manufactured with high strength materials.

The stone crusher at jaws model TRITONE is a machine projected and realized for allow the crushing of marble, granite and similar, it has been studied to reduce the rejection of stone (inert refusals) in gravel.
The TRITONE crusher inverts refusals and converts them in order to be used in a different way. This transformation allow, furthermore, all the marble factories and similar to avoid the emission of the MUD (declaration for special refuses) every year to their chamber of commerce.
The carrying structure of the stone crusher at jaws model TRITONE is in cast iron, subjected to a treatment of sandblasting and then processed with epoxy paint. The blades, in order to crush, are subjected to a heat treatment to induce hardening, in order to catch up an advanced hardness to 60 HRC to grant the long duration of it.
In this new model the two blades can both move for improve the efficiency.
Data and technical details
Motor for the movement of the blades, power: 5.5 kW.
Electrical implant and control of low tension: 24 V c.a.
Implant for manual lubricating.
Control board located on the front of the machine, is simple to use, and is provided with an emergency stop at “mushroom”.
Productivity: 0.9 m3/h = 7.2 m3 per day (with a normal working day of 8 hours)
Dimensions of the grave: min. 5 mm – max. 25 mm

AZTECH is a leading POLISH manufacturer of industrial machinery on both Polish and foreign markets. Our company is selling new and used machines and also spare parts for machines.
The vertical hammer crusher uses a new type of fine-grained crushing (maximum input 400mm, which gives the possibility of obtaining a ready product with a granulation from 0.01mm to 5mm at the machine exit).
A important advantage is the possibility of crushing raw material with increased HUMIDITY ratio.
The vertical crushing combination has many other advantages such as: high reduction ratio, low wear factor, stable work process of the machine. The crusher is designed to crush medium-hard and soft raw materials, such as:

- limestone
- sandstone
- gypsum
- slag
- charcoal
- hard coal
- stone
- concrete
- glass
- cap
- anthracite
MODEL- KM-PI-800
INLET (mm) - 150x250mm
CAPACITY (t / h) - 15
ENGINE (kW) - 22
We have in stock other types of new, never used hammer crushers of various powers and capacities.
model: KM-PI-1000 / inlet 200x300mm (2 pcs) / 37 kw engine / capacity up to 20 t / fraction of finished goods 0-15mm (adjustable with the number of hammers)
model: KM-PI-1250 / inlet 300x400mm (2 pcs) / engine 75 kW / capacity up to 35 t / fraction of finished goods 0-20mm (adjustable with the number of hammers)
model: KM-PI-1500 / inlet 400x500mm (2 pcs) / engine 130 kW / capacity up to 50 t / fraction of finished goods 0-25mm (adjustable with the number of hammers)
model: KM-PI / 1700 / inlet 500x600mm (2 pcs) / engine 160 kW / capacity up to 100 t / fraction of finished goods 0-30mm (adjustable with the number of hammers)
The hammers are made of high-quality, hard-wearing MANGANESE STEEL
ATTENTION:
1. The given capacities refer to loose material with a density of 1000 kg / m3.
2. Our products are constantly updated and improved, AZTECH reserves the right to change the parameters and design without prior notice to the user;
3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
The prices given are NET prices.
We invite you to try our offer and if in Poland, to visit our point of sales in Opole region – YOU HAVE THE POSSIBILITY TO TEST OUR MACHINE WITH YOUR MATERIAL.

A hammer crusher from the high-performance series is a machine designed for medium and fine-grained crushing of materials of various hardness (for stone, e.g. sandstone - basalt), including recycled waste (for aluminum, electronic equipment). In our offer you will find machines with horizontal or vertical operation, in various sizes (power, amount of charge, production capacity, fraction of the finished product).
In principle, the impact is the most important for the operation of the hammer crusher. Inside the crushing chamber there is a rotor to which hammers are attached. Falling fragments are hit by them, which changes the direction of their fall. This is to maximize the force with which they collide with the plates on the swinging beams. Then it goes to further, mutual collisions, thanks to which an even greater fragmentation is achieved.
Purpose of machines:
Due to its properties, the hammer crusher is often used in mining and aggregate mines, especially for stone. It is also often used where recycling is important for entrepreneurs - during demolition works or in scrap yards. The most frequently processed materials include:
basalt
sandstone
charcoal
coal
stone
concrete
brick
calcium
aluminum
electronic equipment
Hammer crushers with horizontal action have the ability to regulate the obtained fraction of goods by using a transverse grate at the material outlet. Thanks to this, you have full control over the obtained fraction of the finished material. Machines designed for crushing materials with a moisture content of up to 15%!
Vertical action hammer crushers are characterized by crushing the material to fractions below 1 mm. The characteristics of the machine and the lack of the use of a grate / sieve allow for crushing materials with increased humidity, with the possibility of wet crushing (feeding a stream of water along with the material to be crushed).
In all types of hammer crushers, the internal walls and hammers are made of high-quality and wear-resistant manganese steel, which makes the use of the machines effective, long-lasting and economical.
AVAILABLE MODELS
HORIZONTAL PERFORMANCE HAMMER CRUSHERS
model max load capacity power fraction (adjustable)
KM-PO / E-300x400 to 350mm up to 6 t / h 11Kw 0.5mm to 30mm
KM-PO / E-400x600 up to 550mm up to 15 t / h 18.5 - 30 Kw 0.5mm up to 50mm
KM-PO / E-600x800 up to 750mm up to 25 t / h 55 Kw 0.5mm up to 70mm
KM-PO / E-800x1000 up to 950mm up to 38 t / h 75 Kw 0.5mm up to 80mm
KM-PO / E-1000x1200 up to 1150mm up to 50 t / h 110 - 132 Kw 0.5mm up to 100mm
Caution:
1. The given capacities refer to the material with a density of 1000 kg / m3.
2. Our products are constantly updated and improved, AZ TECH Sp. z .o. reserves the right to change parameters and design without prior notice to the user;
3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.
HAMMER CRUSHERS WITH VERTICAL ACTION
model max load capacity power fraction
KM-PI-800 up to 300mm up to 15 t / h 22 Kw under 1mm
KM-PI-1000 up to 200mm up to 25 t / h 37 Kw under 0.8mm
KM-PI-1250 up to 700mm up to 40 t / h 55 - 75 Kw under 0.6mm
KM-PI-1500 up to 550mm up to 60 t / h 75 - 110 Kw under 0.5mm
Caution:
1. The given capacities refer to the material with a density of 1000 kg / m3.
2. Our products are constantly updated and improved, AZ TECH Sp. z .o. reserves the right to change parameters and design without prior notice to the user;
3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.

Laxman Jaw Crusher are made as per standard norms to crush stone, river gravel, Gitti, limestone, etc as per requirement.
Single toggle jaw crushers can be used in different stages of crushing plant and many other use.
These Jaw crushers can be employed in multiple stages to achieve desired output.
Salient Features:-
Higher Output:- Stone (Gitti) crusher delivers higher output compared to similar jaw crusher due to following specialty:-Sharper nip angle, Deeper crushing chamber, 55% of manganese content to jaw plate and toggle & side plates.
Strong Body:- CO2 welded body entre locked, stress relived body frame, crankshaft is made from specially high steel, material used EN-9, Self aligning Spherical roller bearing.
Maintenance:- Negligible maintenance, No wear and tear of crusher.
Special Material Used:- 50 mm ,40 mm and 32 mm thick plates are used to fabricate body and also lever, The plates are tested & without cracks.

The Stone Crusher is a powerful and efficient machine that is designed to break down and crush hard materials such as stones. This product is perfect for use in stone quarries, construction sites, and mining operations where large amounts of stones need to be crushed quickly and efficiently.
Product Features of Stone Crusher:
Strong crushing force: A stone crusher is made of sturdy and durable material, capable of crushing stones of various hardness and size.
High crushing efficiency: stone crusher adopts advanced crushing technology, which can complete the crushing operation quickly and effectively.
Uniform crushing size: stone crusher can adjust the crushing size according to the need, to meet the needs of different users.
Easy to use: The stone crusher is simple to operate and easy to maintain.