Quartzite Vacuum Resin-Treating Plants

The Aims of Using Block Reinforcing Line:
This system gives the reliability to transfer very fragile stone from quarries to stone factories without any loss of material. By utilizing this reinforcement process, the risk of losing defective material in the cutting process will be reduced significantly and the slabs will be guaranteed to be processed with the lowest loss of material. In the other words, using this system increase the efficiency of quarries and stone factories sharply.
The Method:
By means of pressure water, firstly the block will be washed. After that, by using a drying room, the block will be dried. Then, the block is covered into special device like; draining layer, fiber glass layer, vacuum bag and etc. to be prepared for vacuum process and resin injection. Just after the resin injection process, the block is transferred into the pressure vessel and by using a pressure cycle, a very deep penetration and a really strong cover around the block and slabs will be guaranteed. Finally, for more quick resin curing process, the block will be transferred into a drying room.
The benefits of using this innovative system:
-by means of this system, all the cracks and fissures which are connected to the surfaces of the block will be filled with resin.
-Deep resin penetration into all micro-cracks
-all of the air bubbles in the vacuum bag will be drained completely.
-really strong cover around the block and slabs

These machines facilitate the penetration of the resin, previously deposited on the surface of the slabs, into the micro-cracks and pores. The process is achieved by housing the slab in a vacuum chamber.

SIMEC supplies mezzanines housing containers of resin and/or pumps and distributors for the automatic resining area. Mezzanines are made in different sizes to satisfy all the customers’ needs. They are made of a sturdy metallic carpentry treated with special two component paints and completed with galvanized steel stairs. This area can be equipped with an optional lighting system placed underneath.

The Aims of Using Block Reinforcing Line:
This system gives the reliability to transfer very fragile stone from quarries to stone factories without any loss of material. By utilizing this reinforcement process, the risk of losing defective material in the cutting process will be reduced significantly and the slabs will be guaranteed to be processed with the lowest loss of material. In the other words, using this system increase the efficiency of quarries and stone factories sharply.
The Method:
By means of pressure water, firstly the block will be washed. After that, by using a drying room, the block will be dried. Then, the block is covered into special device like; draining layer, fiber glass layer, vacuum bag and etc. to be prepared for vacuum process and resin injection. Just after the resin injection process, the block is transferred into the pressure vessel and by using a pressure cycle, a very deep penetration and a really strong cover around the block and slabs will be guaranteed. Finally, for more quick resin curing process, the block will be transferred into a drying room.
The benefits of using this innovative system:
-by means of this system, all the cracks and fissures which are connected to the surfaces of the block will be filled with resin.
-Deep resin penetration into all micro-cracks
-all of the air bubbles in the vacuum bag will be drained completely.
-really strong cover around the block and slabs

SIMEC supplies mezzanines housing containers of resin and/or pumps and distributors for the automatic resining area. Mezzanines are made in different sizes to satisfy all the customers’ needs. They are made of a sturdy metallic carpentry treated with special two component paints and completed with galvanized steel stairs. This area can be equipped with an optional lighting system placed underneath.