Resin Line Machines in Spain

Ares oven by Xilex dries water instantly both inside and on the surface of the stone slabs. This oven is intended for drying process on natural stone (marble and granite), artificial stone (quartz and cristobalite) and porcelain tile.
Unlike conventional kilns, Ares effectively removes moisture by drying all cracks and holes so that the material is prepared for optimal filtering and resin adhesion in the next step on the production line.
In addition, Ares is an instant oven since it performs an effective drying in just 2-3 minutes, a very short time in comparing to the drying of 30-60 minutes that conventional ovens require. The instant drying allows a quick manipulation of the slabs so the productivity increases up to 20% depending on the process.
Ares is installed without the typical foundations of conventional systems, does not require the additional use of metal trays and does not require high maintenance costs, so the purchase and installation of the Ares oven by Xilex is 40% cheaper than the acquisition of a conventional system.
Great energy savings in drying of marble and granite
The great profitability of Ares is related, in addition to optimizing time, with a significant decrease in power consumption. Ares efficiency represents a 15% saving in energy expenditure compared to conventional drying systems. This decrease in energy consumption is mainly due to three factors:
Instant start with 100% efficiency. This is a great added value compared to conventional systems, which require one hour of preheating.
Adaptation of power to the material. Ares automatically adapts to the material’s drying needs, adjusting the power required for each piece. Conventional lines, on the other hand, perform linear power consumption.
Power on when detection of slabs. Ares only lights up when it detects the presence of slabs, unlike conventional lines that remain on whether there are slabs or not.
Quick and easy adaptation of the Ares oven to the production line
Ares oven is easily installed on the production line and adapts to any transport system without additional investment thanks to its practical size (2500mm x 2500mm), compared to a conventional accumulator (7000x2500x6000mm).
It is also important to note that Ares allows slabs to be dried directly from the block cutter or multiwire since the machine can be installed on the existing transport line without the need for any works or foundations, furthermore, its installation does not even require stopping production.
For all these reasons, the Ares oven by Xilex is a technology for all companies that work with marble and granite and seek a definitive solution to moisture problems to improve processes, increase production and offer a higher quality product to their customers.

Kronos is the Xilex machine that allows total control of the filtering and adhesión process to obtain top quality finishes. It is an oven for epoxy, polyester and polyurethane (PUR) resin curing that accelerates the activation and consolidation of chemical properties in marbles, granites and other more delicate types of natural stone such as onyx or alabaster.
Kronos oven differs from conventional machines in that it performs greater filtration and adhesion of resins, and it allows to produce controlled effects on the surface finish (brightness, light and dark tones, etc.) with a production of up to 30 tables at hour.
Also, Kronos by Xilex eliminates waiting times of 24h-48h-72h since natural stone can be polished directly after only 45 minutes. In this way, production lines can perform reinforcement, finishing and continuous polishing, which translates into a 30% increase in productivity and a significant reduction in delivery times of the final product.
Maximum quality and control of the marble and granite finish
Kronos allows filtering control and perfect adhesion to achieve the best slabs quality and avoid breakage in the final material. Also, the good filtering of Kronos in its uniform process improves the performance of the resins and allows to obtain the desired surface effects on the product.
The resin hardening machine, Kronos, can easily adapt to conventional production lines as it fits to the standard size of the transport tables. In this way, companies in the marble, granite and natural stone sector that want to improve the finish of their materials and optimize processes just have to make a simple adaptation of their production lines.
Productivity increase and cost savings with Kronos
Processing with Kronos oven by Xilex allows a fast activation of catalysis of resins, achieving significant savings and a 30% increase in productivity:
Eliminates waiting time of 24-48-72h: after hardening, in 45 minutes, polishing can be performed.
Increase of production in the number of resin slabs.
Reduction of resin consumption up to 20%.
Energy savings of up to 40%.
Space optimization: reduction of the trays necessary for material processing and elimination of intermediate warehouses before polishing.

Kronos is the Xilex machine that allows total control of the filtering and adhesión process to obtain top quality finishes. It is an oven for epoxy, polyester and polyurethane (PUR) resin curing that accelerates the activation and consolidation of chemical properties in marbles, granites and other more delicate types of natural stone such as onyx or alabaster.
Kronos oven differs from conventional machines in that it performs greater filtration and adhesion of resins, and it allows to produce controlled effects on the surface finish (brightness, light and dark tones, etc.) with a production of up to 30 tables at hour.
Also, Kronos by Xilex eliminates waiting times of 24h-48h-72h since natural stone can be polished directly after only 45 minutes. In this way, production lines can perform reinforcement, finishing and continuous polishing, which translates into a 30% increase in productivity and a significant reduction in delivery times of the final product.
Maximum quality and control of the marble and granite finish
Kronos allows filtering control and perfect adhesion to achieve the best slabs quality and avoid breakage in the final material. Also, the good filtering of Kronos in its uniform process improves the performance of the resins and allows to obtain the desired surface effects on the product.
The resin hardening machine, Kronos, can easily adapt to conventional production lines as it fits to the standard size of the transport tables. In this way, companies in the marble, granite and natural stone sector that want to improve the finish of their materials and optimize processes just have to make a simple adaptation of their production lines.
Productivity increase and cost savings with Kronos
Processing with Kronos oven by Xilex allows a fast activation of catalysis of resins, achieving significant savings and a 30% increase in productivity:
Eliminates waiting time of 24-48-72h: after hardening, in 45 minutes, polishing can be performed.
Increase of production in the number of resin slabs.
Reduction of resin consumption up to 20%.
Energy savings of up to 40%.
Space optimization: reduction of the trays necessary for material processing and elimination of intermediate warehouses before polishing.