Sandstone Tile Cutting Machines

MTX 700/1 is a one-head multi-disc cutting machine, and it is used for reject recovery in marble; it is very rugged with a shaft to hold the discs which is mounted by both sides to obtain stability and lack of vibrations. This solution allows to cut in one run the materials of big thickness. On the shaft that holds the discs, it is possible to mount more than one cutting disc spaced by proper separators in order to obtain different sizes. The conveyor belt of piezes in rubber with high adhesion is large 700mm and its speed is adjustable through inverter. The head is adjustable vertically with an electric control. With an adequate motor it allows to cut till 80/100 mm of thickness. The cutting speed of 1/7 ml/min is adjustable electrically with a manual control for different thickness.

MultiCut 350/550 - Programmable multi-spindle automatic saw with revolving table
Breton Multicut is a programmable multi-spindle automatic saw with a revolving worktable and is designed for cutting both natural and engineered stone slabs to any required size.
Breton Multicut is designed and developed to offer high-production and cutting performance combined with improved operational flexibility and a sophisticated and advanced slab optimisation system.
The work cycle - longitudinal cuts, work-table rotation, transversal cuts - is fully automatic and computer managed. Slab loading and product unloading operations can be automated to meet specific requirements. Precise and accurate cutting. The work cycles are programmed on the machine monitor and can be stored and then recalled whenever required. Depending on slab thickness, the slab can be cut in plunge-cut or step-cut mode. The “scanner” system scans the shape of the slab and records surface defects, and a special software elaborates and defines the best cutting cycle based on the slabs available and work orders programmed in the system. The result is maximum production optimisation.
Slab surface optimisation system
Breton Multicut can in real time optimise slab surface by automatically selecting the most appropriate cutting cycle to process the work orders previously programmed in the computer system which controls and manages the production line.
When slabs are fed-into Breton Multicut, a scanner scans the shape and size of the slabs and the operator can mark out any defects, holes or cracks in the surface. Based on the information transmitted by the scanner and on the programmed work orders, a purposely developed software manages the machines and equipment forming the production line simultaneously. This software can also receive work orders through a local access network from the office PC. The work order can include diverse formats of tiles which are identified in the order utilising just the measurements for length and width. For each format the required quantity is defined and is automatically updated based on the number of cutting cycles for each slab processed until the order is completed. Slab cutting, based on the information received from the scanner, is optimised to reduce waste. Even slabs with surface defects such as holes, stains, marks etc. are optimised using this system. The scanner records the defects of the slabs and
sends prompts to the software only if the defects have been previously marked out by the operator who simply positions over the defect (whether it is a hole, stain, crack etc…) a piece of non-reflecting matt material (e.g. standard household carpet). When the slab passes under the scanner, the scanner
reads the covered areas as if part of the slab is missing identifying these zones as part/s of the slab which cannot be utilised in production. Prompts are then sent to the main system PC and the software elaborates the information and defines the best cycle to optimise production. The operator removes the material used to cover the defects which can be reused or thrown away. The information is then graphically displayed on the monitor indicating the percentage of material processed. And the waste produced….. There are several cutting and optimisation options: For sawing strips (longitudinal or transversal or mixed) the system will automatically standardize the cutting pattern so as to reduce the machine’s cycle time for very complex cutting patterns. This function brings together, where possible, strips having the same cuts so that they can be sawn in a single work cycle.

2nd hand Strip Cutting,Edge Trimming Machine
Second Hand Multidisc Cutter Machine

MST 350 45° Miter cutter
Heavy duty miter saw. The rigid structure eliminates vibrations and gives a sharp edge on your miters.
Retractable alignment provides for easy loading. Pneumatic cylinders firmly hold the stone in place on the machine table and can be adjusted for narrow strips, ensuring a straight mitre every time.
Available with optional 3 motors to mount polishing pads for polish flat edges.

MST – 45°Miter Cutter
Machine made in heavy duty aluminum, with high precision ball linear guides, ensures precise movements. This machine moves in automatic.

Irregular stone veneer saw cutting machine for flate cut
thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistency, efficiency, and reliability.

EM25-4 STONE VENEERING MACHINE • Belt Width: 300 mm & 300 mm • Working Width: 300 mm • Working Height: 50 - 300 mm • Double 45 Degree Conveyor Belts • Number Of Heads: 4 • Disc Diameter *Optional: 1000 mm - 900 mm - 800 mm - 600 mm • Head Motor Power *Optional: 3 x 22 kW, 1 x 7,5 kW • Belt Motor Power: 2 x 0,55 kW • Up-Down Motor Power: 0,55 kW • Belt Speed: 3- 5,5 mt / min • Machine Dimensions ( W / L / H ) : 2420 / 6880 / 2180 mm

ATM 1500-2500-3500 Multiple cross-cutting machine for marble and granite

Ref.: 55
Stone Splitting Machine (Tunnel Type) for splitting large stones and preparing them for smaller splitting machines in order to obtain stone cubes or blocks with a rustic appearance. It is used to produce slab paving and flat finished products. Precision is achieved with its long blade. It allows the execution of various works, such as pavements, façades and rustic walls. Ensures better use of stone and greater productivity.
Types:
Type A (PPT) - simple movement
Type B (PPTX) - double movement.

MTX 700/1 is a one-head multi-disc cutting machine, and it is used for reject recovery in marble; it is very rugged with a shaft to hold the discs which is mounted by both sides to obtain stability and lack of vibrations. This solution allows to cut in one run the materials of big thickness. On the shaft that holds the discs, it is possible to mount more than one cutting disc spaced by proper separators in order to obtain different sizes. The conveyor belt of piezes in rubber with high adhesion is large 700mm and its speed is adjustable through inverter. The head is adjustable vertically with an electric control. With an adequate motor it allows to cut till 80/100 mm of thickness. The cutting speed of 1/7 ml/min is adjustable electrically with a manual control for different thickness.

MST – 45°Miter Cutter
Machine made in heavy duty aluminum, with high precision ball linear guides, ensures precise movements. This machine moves in automatic.