Stone Factory Machines in Poland

An automatic MEC splitter for the production of 1600x300 mm granite palisades of the highest quality.
Advantages of the splitting line we offer:
Excellent quality of finished products with a width of up to 1600 mm, thanks to the splitting system of the lower blade
Excellent finished product quality with a width of up to 1600 mm, thanks to the accumulator of hydraulic pressure that provides immediate force when the blade meets the material
High precision of the size of the final product, thanks to the pusher feeding system which has 2mm tolerances (It is important that the granite block be cut from the back side of the pusher action
High efficiency due to operation and automatic splitting managed by PLC
Increased speed in case of corrections or remote assistance (via internet).
Guarantee of receipt of the product (without interruptions in the middle), thanks to the special design of the blade
splitting.
The possibility of dividing the material height 4 cm with a width of more than 1 m
Possibility to work in 3 shifts (24 hours) due to the appropriate design of hydraulic / electronic and reinforced structures

INSTALLATION FOR CLARIFYING, RECYCLING OF CONTAMINATED WATER AND FOR DRAINAGE OF SLUDGE.
The FB / 2000V model is equipped with:
- waste water collection channel,
- a system controlling the stream of water flowing into the silo
(reducing water pressure and speed) made of steel,
- steel supply piping equipped with flanges and elbows,
- FB 50 manual valve, to regulate the water stream,
- steel piping collecting purified water, equipped
in flanges and elbows.
The method of making the interior of the silo:
-Completely protected against corrosion and abrasion (it is mainly used to facilitate the separation of sludge from the walls and to prevent sludge from settling on them)
TECHNICAL DATA
diameter 2000 mm
side dimensions 2200 x 2200 mm
total occupied height 5100 mm
cleaning capacity of contaminated water 500 l / min
plunge pump with a power of 2.2 kW
5000 l steel container for clean water

INSTALLATION FOR CLARIFYING, RECYCLING OF CONTAMINATED WATER AND FOR DRAINAGE OF SLUDGE.
The FB / 2000V model is equipped with:
- waste water collection channel,
- a system controlling the stream of water flowing into the silo
(reducing water pressure and speed) made of steel,
- steel supply piping equipped with flanges and elbows,
- FB 50 manual valve, to regulate the water stream,
- steel piping collecting purified water, equipped
in flanges and elbows.
The method of making the interior of the silo:
-Completely protected against corrosion and abrasion (it is mainly used to facilitate the separation of sludge from the walls and to prevent sludge from settling on them)
TECHNICAL DATA
diameter 2000 mm
side dimensions 2200 x 2200 mm
total occupied height 5100 mm
cleaning capacity of contaminated water 500 l / min
plunge pump with a power of 2.2 kW
5000 l steel container for clean water

Stone Splitting Machine PLK/300-50T/4 is a machine used for producing low-dimensioned stone blocks out of natural stone as well as artificial one. The construction of the machine allows creating single workplaces or connecting a couple of machines in production line.
The machine has body adapted for endurance strong forces during work, the tilting table with wear-resistant steel and the hydraulic power unit to supply mains hydraulic cylinder. Compact construction enables users to do quick assembly and disassembly of the machine. All the hydraulic and mechanical elements are situated in easily available places which shortens the time of servis operations to a minimum.
Characteristics:
strong boody
tilting table
splitting knifes
hydraulic pressure of knives

The most frequently purchased machines are those with workspace dimensions 2000X4000. They are perfect for the stone industry and for companies which deal with cutting metal. They are perfect both for production plants and for service shops.
The lowest costs of pump and head maintenance
The Kimla waterjet machines are equipped with high pressure pump with intensifier pump and Accustream accessories (Accustream - a renowned American company). Pumps produced by Accustream distinguish the lowest maintenance costs, which amount to approximately U.S. $ 1.25 per hour of work. It is worth noting that the maintenance costs of some producers are even four times higher. This is especially important as in a competitive waterjet market operating costs can determine the success of the project.
Adjusting the amount of abrasive
Kimla machines are equipped with Accustream abrasive regulator with smoothly regulated amount of garnet supplied to the head. This allows you to fine-tune the amount of abrasive to cut material and the specific conditions of the machining.
Compact space-saving design
Waterjet machines produced by Kimla company are characterized by an extremely compact design which requires little space and is convenient to use. Access to the material lying on the bath grate is accessible from four sides and allows the operator to manipulate the material freely and enables the collection of cut pieces.
200l abrasive tank with the hopper system
Abrasive tanks supplied with Kimla machines have a capacity of 200 liters, which allows for hours of cutting without stopping to refill the abrasive. The hopper allows for convenient refilling of abrasive through the use of automatic lifting the mushroom valve.