Limestone Stair

Specifications
1. Wet type mosaic cutting machine is suitable for cutting big floor and wall tiles into narrow, square and diamond forms.
2. Wet type mosaic Cutting Machine also can cut tiles into many small ones with different width at one time.Wet type mosaic cutting machine cut wall & floor tile, high cutting efficiency
3. Wet Type Mosaic Cutting Machine is cutting big wall and floor tiles into small ones including mosaic. The processing width of wet type ceramic tile Cutting Machine is 25-600mm.
4. Wet type mosaic Cutting Machine also can precut tile first and then cut off at last.
5. Due to reasonable design and high working precision, it has the advantage of high cutting efficiency, high precision and high production.

Applications:
Shaft Cutting Machine is suitable for cut or slotting floor tile and stone, It can cut tile into narrow, Square, Diamond and so on. Can process the tile from 25-600/800mm to different size in one time. The characteristic of this machine is high accuracy, Low broken, Big output.
Feature
1. The bearing in bearing box is use water-cooling device to make the bearing not hot after long time use, Delay the bearing is life.
2. Use high quality bearing supporting the front and behind of the main shaft to make the shaft drive with more high precision.
3. Add manual adjust device in the operative panel to make is driver it more easy.
4. Cantilever type structure make the machine drive steady with low failure rate.

Smoothing machine single phase for steps
Accessories
1 abrasive disk carrier
1 abrasive guard ring
1 Rubber coated spatula cm 40
1 Set of servicing spanners
SKU: 184

the version with fairing and 2 hours of autonomy
always the version with fairing and 2 hours of autonomy
the version without fairing
always the version without fairing
THREE VERSIONS AVAILABLE;
ONE WITH FAIRING AND AUTONOMY TWO HOURS OF CONTINUOUS OPERATION
ONE WITH FAIRING AND ONE HOUR OF CONTINUOUS OPERATION
ONE WITHOUT FAIRING WITH ONE HOUR OF AUTONOMY, THE LIGHTEST, SPECIFIC FOR VERTICAL WORKS
THE FIRST TWO VERSIONS HAVE REVOLUTION ADJUSTMENT AND REVERSE OF THE ROTATION SENSE
THE LATEST FIXED SPEED VERSIOR
THE REVERSE OF THE DIRECTION OF ROTATION, COVERED BY OUR PATENT, ALLOWS TO SHORTEN THE SANDING AND POLISHING TIMES BY AT LEAST 30%
BECAUSE BY ALWAYS REVIVING THE TIPS OF THE ABRASIVES AND POLISHING WITH EVERY REVERSE, WE HAVE A GREATER ACTION
the version with fairing and 1 hour of autonomy
THE BATTERY-POWERED FLEX WORKS WITH ITS OWN BATTERY ON BOARD, SO IT IS NOT BOUND TO ANY CABLE.
IT HAS AN AUTONOMY OF 1-2 HOURS OF CONTINUOUS OPERATION, DEPENDING ON THE MODEL, THEN RECHARGES IT.
COMPARED TO THE SINGLE FLEX IT HAS DIFFERENT CHARACTERISTICS:
WEIGHT ABOUT 3 KG
BACKING PAD WITH VELCRO DIAM 150-180 MM
MAX ROTATION OF 700 RPM
TANK AND WATER TAP ON BOARD
THE TWO MODELS WITH THE FAIRING ALSO HAVE THE REVERSAL OF THE SENSE OF ROTATION THAT ALLOWS TO SHORTEN THE SANDING AND POLISHING TIMES BY AT LEAST 30%
GIVEN THE LOW WEIGHT AND NO CABLE CONSTRAINTS, IT IS EVEN MORE SUITABLE FOR VERTICAL WORKS, AND VERY SPECIFIC FOR WORKING IN CEMETERIES, NOT NEEDING TO BRING GENERATORS
THE VERSION WITH SPEED REGULATOR ALLOWS THEM TO BE VARIED FROM 80 TO 700 RPM
GIVEN ITS LARGE BACKING PAD, IT IS ALSO VERY SUITABLE FOR CRYSTALLIZING MARBLES, OPERATION FACILITATED VERY QUICKLY THANKS TO ITS CHARACTERISTICS
ALTHOUGH IT HAS A LOWER ROTATION THAN THE SINGLE FLEX, IT DOES NOT MAKE PRACTICALLY LESS WORK AS ITS BACKING PAD IS BIGGER THAN THE SINGLE FLEX
IN THE PHOTOS ABOVE ALSO THE SIMPLE VERSION WITHOUT FAIRING, AND WITHOUT REVOLUTION ADJUSTMENT
WATCH THE VIDEOS
https://youtu.be/njLSbFvesCY
https://youtu.be/rcK0I-pjbq8
https://youtu.be/rmdDRjhuU4E
https://youtu.be/pEodg723h0s

the version with fairing and 2 hours of autonomy
always the version with fairing and 2 hours of autonomy
the version without fairing
always the version without fairing
THREE VERSIONS AVAILABLE;
ONE WITH FAIRING AND AUTONOMY TWO HOURS OF CONTINUOUS OPERATION
ONE WITH FAIRING AND ONE HOUR OF CONTINUOUS OPERATION
ONE WITHOUT FAIRING WITH ONE HOUR OF AUTONOMY, THE LIGHTEST, SPECIFIC FOR VERTICAL WORKS
THE FIRST TWO VERSIONS HAVE REVOLUTION ADJUSTMENT AND REVERSE OF THE ROTATION SENSE
THE LATEST FIXED SPEED VERSIOR
THE REVERSE OF THE DIRECTION OF ROTATION, COVERED BY OUR PATENT, ALLOWS TO SHORTEN THE SANDING AND POLISHING TIMES BY AT LEAST 30%
BECAUSE BY ALWAYS REVIVING THE TIPS OF THE ABRASIVES AND POLISHING WITH EVERY REVERSE, WE HAVE A GREATER ACTION
the version with fairing and 1 hour of autonomy
THE BATTERY-POWERED FLEX WORKS WITH ITS OWN BATTERY ON BOARD, SO IT IS NOT BOUND TO ANY CABLE.
IT HAS AN AUTONOMY OF 1-2 HOURS OF CONTINUOUS OPERATION, DEPENDING ON THE MODEL, THEN RECHARGES IT.
COMPARED TO THE SINGLE FLEX IT HAS DIFFERENT CHARACTERISTICS:
WEIGHT ABOUT 3 KG
BACKING PAD WITH VELCRO DIAM 150-180 MM
MAX ROTATION OF 700 RPM
TANK AND WATER TAP ON BOARD
THE TWO MODELS WITH THE FAIRING ALSO HAVE THE REVERSAL OF THE SENSE OF ROTATION THAT ALLOWS TO SHORTEN THE SANDING AND POLISHING TIMES BY AT LEAST 30%
GIVEN THE LOW WEIGHT AND NO CABLE CONSTRAINTS, IT IS EVEN MORE SUITABLE FOR VERTICAL WORKS, AND VERY SPECIFIC FOR WORKING IN CEMETERIES, NOT NEEDING TO BRING GENERATORS
THE VERSION WITH SPEED REGULATOR ALLOWS THEM TO BE VARIED FROM 80 TO 700 RPM
GIVEN ITS LARGE BACKING PAD, IT IS ALSO VERY SUITABLE FOR CRYSTALLIZING MARBLES, OPERATION FACILITATED VERY QUICKLY THANKS TO ITS CHARACTERISTICS
ALTHOUGH IT HAS A LOWER ROTATION THAN THE SINGLE FLEX, IT DOES NOT MAKE PRACTICALLY LESS WORK AS ITS BACKING PAD IS BIGGER THAN THE SINGLE FLEX
IN THE PHOTOS ABOVE ALSO THE SIMPLE VERSION WITHOUT FAIRING, AND WITHOUT REVOLUTION ADJUSTMENT
WATCH THE VIDEOS
https://youtu.be/njLSbFvesCY
https://youtu.be/rcK0I-pjbq8
https://youtu.be/rmdDRjhuU4E
https://youtu.be/pEodg723h0s

Specifications
1. Wet type mosaic cutting machine is suitable for cutting big floor and wall tiles into narrow, square and diamond forms.
2. Wet type mosaic Cutting Machine also can cut tiles into many small ones with different width at one time.Wet type mosaic cutting machine cut wall & floor tile, high cutting efficiency
3. Wet Type Mosaic Cutting Machine is cutting big wall and floor tiles into small ones including mosaic. The processing width of wet type ceramic tile Cutting Machine is 25-600mm.
4. Wet type mosaic Cutting Machine also can precut tile first and then cut off at last.
5. Due to reasonable design and high working precision, it has the advantage of high cutting efficiency, high precision and high production.

Applications:
Shaft Cutting Machine is suitable for cut or slotting floor tile and stone, It can cut tile into narrow, Square, Diamond and so on. Can process the tile from 25-600/800mm to different size in one time. The characteristic of this machine is high accuracy, Low broken, Big output.
Feature
1. The bearing in bearing box is use water-cooling device to make the bearing not hot after long time use, Delay the bearing is life.
2. Use high quality bearing supporting the front and behind of the main shaft to make the shaft drive with more high precision.
3. Add manual adjust device in the operative panel to make is driver it more easy.
4. Cantilever type structure make the machine drive steady with low failure rate.

Smoothing machine single phase for steps
Accessories
1 abrasive disk carrier
1 abrasive guard ring
1 Rubber coated spatula cm 40
1 Set of servicing spanners
SKU: 184