Travertine Quarry Crusher in India

Laxman Jaw Crusher are made as per standard norms to crush stone, river gravel, Gitti, limestone, etc as per requirement.
Single toggle jaw crushers can be used in different stages of crushing plant and many other use.
These Jaw crushers can be employed in multiple stages to achieve desired output.
Salient Features:-
Higher Output:- Stone (Gitti) crusher delivers higher output compared to similar jaw crusher due to following specialty:-Sharper nip angle, Deeper crushing chamber, 55% of manganese content to jaw plate and toggle & side plates.
Strong Body:- CO2 welded body entre locked, stress relived body frame, crankshaft is made from specially high steel, material used EN-9, Self aligning Spherical roller bearing.
Maintenance:- Negligible maintenance, No wear and tear of crusher.
Special Material Used:- 50 mm ,40 mm and 32 mm thick plates are used to fabricate body and also lever, The plates are tested & without cracks.

Tertiary Cone Crushers are the crushers that receives feed from the secondary crusher, further reducing rock in size.

SMAN SHCC-T (Tertiary) Gyratory Hydraulic Cone Crushers are the ultimate solution for the tertiary crushing to achieve uniform product size of hard rocks, ores and minerals.

SMAN SHCC-T (Tertiary) Gyratory Hydraulic Cone Crushers are equipped with the most advanced crushing techniques. The outer shells and the other body components are made out of the finest quality steel castings and its robust design helps withstand high crushing loads. The main shaft and eccentric system is made out high grade forged alloy steel and precision machined for accurate Gyro Crushing action resulting in maintenance free operation.

SMAN SHCC-T (Tertiary) Gyratory Hydraulic Cone Crushers are supplied inclusive of Hydro-Lube power pack, electrical control panel with motor and soft starter for instant installation.

Features :
1) Uniformity in output product
2) Provided with tramp release accumulator
3) Heavy duty skid with discharge conveyor
4) Installation is very easy and quick.
5) For quick inter site movement, optional mobile attachment is provided
6) Electronically synchronized hydraulic lubrication system
7) Crushing capacity is very high
8) Electrical panel is well equipped with soft starter
9) Heavy duty cast shell made from steel
10) Compact hydro-lube power pack with inbuilt safety features

A crusher that breaks material by squeezing or compressing it between convex and concave shaped surfaces covered by manganese as the wear surface.

SMAN SHCC Gyratory Hydraulic Cone Crushers are the ultimate solution for the secondary crushing to achieve uniform product size of hard rocks, ores and minerals

SMAN SHCC Cone Crushers are supplied inclusive of Hydro-Lube power pack, electrical control panel with motor and soft starter for instant installation.

Features :
1)Quick Installation. NO RCC foundation required
2)Optional Mobile attachment for quick inter site movement
3)Heavy duty skid with discharge conveyor
4)High crushing capacities
5)Tramp release accumulator
6)Compact hydro-lube power pack with inbuilt safety features
7)Uniformly in output product
8)Heavy duty cast steel shell
9)Electronically synchronized hydraulic lubrication system
10)Well equipped electrical panel with soft starter

Secondary Gyratory Hydraulic Cone Crushers are the crushers that receives feed from the primary crusher, further reducing rock in size.

SMAN SHCC-S (Secondary) Gyratory Hydraulic Cone Crushers are the ultimate solution for the secondary crushing to achieve uniform product size of hard rocks, ores and minerals.

SMAN SHCC-S (Secondary) Gyratory Hydraulic Cone Crushers are equipped with the most advanced crushing techniques. The outer shells and the other body components are made out of the finest quality steel castings and its robust design helps withstand high crushing loads. The main shaft and eccentric system is made out high grade forged alloy steel and precision machined for accurate Gyro Crushing action resulting in maintenance free operation.

SMAN SHCC-S (Secondary) Gyratory Hydraulic Cone Crushers are supplied inclusive of Hydro-Lube power pack, electrical control panel with motor and soft starter for instant installation.

Features :
1) Crushing capacity is very high
2) For quick inter site movement, optional mobile attachment is provided
3) Heavy duty skid with discharge conveyor
4) Installation is very easy and quick.
5) Provided with tramp release accumulator
6) Electronically synchronized hydraulic lubrication system
7) Uniformity in output product
8) Electrical panel is well equipped with soft starter
9) Compact hydro-lube power pack with inbuilt safety features
10) Heavy duty cast shell made from steel

Laxman Jaw Crusher are made as per standard norms to crush stone, river gravel, Gitti, limestone, etc as per requirement.
Single toggle jaw crushers can be used in different stages of crushing plant and many other use.
These Jaw crushers can be employed in multiple stages to achieve desired output.
Salient Features:-
Higher Output:- Stone (Gitti) crusher delivers higher output compared to similar jaw crusher due to following specialty:-Sharper nip angle, Deeper crushing chamber, 55% of manganese content to jaw plate and toggle & side plates.
Strong Body:- CO2 welded body entre locked, stress relived body frame, crankshaft is made from specially high steel, material used EN-9, Self aligning Spherical roller bearing.
Maintenance:- Negligible maintenance, No wear and tear of crusher.
Special Material Used:- 50 mm ,40 mm and 32 mm thick plates are used to fabricate body and also lever, The plates are tested & without cracks.

Tertiary Cone Crushers are the crushers that receives feed from the secondary crusher, further reducing rock in size.

SMAN SHCC-T (Tertiary) Gyratory Hydraulic Cone Crushers are the ultimate solution for the tertiary crushing to achieve uniform product size of hard rocks, ores and minerals.

SMAN SHCC-T (Tertiary) Gyratory Hydraulic Cone Crushers are equipped with the most advanced crushing techniques. The outer shells and the other body components are made out of the finest quality steel castings and its robust design helps withstand high crushing loads. The main shaft and eccentric system is made out high grade forged alloy steel and precision machined for accurate Gyro Crushing action resulting in maintenance free operation.

SMAN SHCC-T (Tertiary) Gyratory Hydraulic Cone Crushers are supplied inclusive of Hydro-Lube power pack, electrical control panel with motor and soft starter for instant installation.

Features :
1) Uniformity in output product
2) Provided with tramp release accumulator
3) Heavy duty skid with discharge conveyor
4) Installation is very easy and quick.
5) For quick inter site movement, optional mobile attachment is provided
6) Electronically synchronized hydraulic lubrication system
7) Crushing capacity is very high
8) Electrical panel is well equipped with soft starter
9) Heavy duty cast shell made from steel
10) Compact hydro-lube power pack with inbuilt safety features