Artificial Stone Single Disc Cutting Machine in Italy

Large-sized electronic bridge sawing machine for cutting stone material.
Simple, versatile, strong.
Very strong and stiff iron casting structure with double beam, mechanically worked by using high quality and precision systems.
Spindle sliding on an assembly of iron casting guides and special frictionless pads in oil bath.
Features
THE UNIQUE FEATURES OF COMANDULLI S.U.P. MACHINE
Spindle sliding kinematical motion through a timing belt system with variable speed.
Bridge traverse on special steel guides with ball rollers in oil bath.
Bridge traverse kinematical motion through a pinion/rack system in oil bath with variable speed.
Spindle axis assembled on bearings in oil bath driven by an electric motor through V-belts.
Spindle lifting on round guide with screw kinematical motion with variable speed.
Turntable on a special ball-bearing pivot block, particularly sensitive, with a full load too.
Machine with fast movements and soft at the same time, and particularly silent.
The machine is supplied with water system with solenoid valve and flow-indicator, which stops the machine automatically in case of water lack.
Electrical board at floor level and hanging push- button control panel.
Linear laser for material alignment.
OPTIONS
There is always enough room for some further desires.
Inverter for spindle speed regulation.
Bench electrical feed.
Bench support structure from carpentry.
Reference square on the bench for piece alignment.
Electronic equipment for profiled shapes with possibility of profiles drawing directly on the control panel screen.

Circular cross cut revolving saw for angle cutting, developed and designed to simplify cuts on small pieces. Ideal for creating tiles and design pieces. The machine is equipped with precision goniometer and it's available with manual or motorized feed.
ADVANTAGES
Revolving cross-cutting machine ARS for anglle cutting:
Available with manual or motorized head feed;
Maximum cutting precision guaranteed by a special beam design;
Head assembly swivelling: +45°, 0°, -45°.

Medium-sized carriage machine for cutting stone material
Very strong cast iron structure, mechanically worked with high quality and precision processes.
The main feature is the remarkable table flowability obtained through special gears, always in oil bath and perfectly protected by stainless steel covers.
Features
THE UNIQUE COMANDULLI A.G.P. FEATURES
The spindle axis is assembled on oil bath bearings and operated by electric motor through V-type belts.
Spindle traverse and vertical movements through a screw controlled by reducer.
Possibility of manual 90° spindle slant to carry out slanted cuts or undercuts.
Bench manual movement through handwheel and reducer/rack kinematic motion.
Bench mounted on reinforced concrete pillars.Two models available:
Disc maximum diameter 800 mm (optional 1000 mm)
Spindle power 15 kW (optional 22 kW)
OPTIONS
There is always enough room for some further desires
Bench with automatic rotation and precision locking each 45°. Electronic positioning on 360°.
Bench rotation visualisation with control 1/100°.
Overturning bench from 0° to 80° with wood loading platform and hydraulic control unit.
Adjustable disc rotation speed (inverter): 700÷2000 g/1’.
Automatic centralized lubrication.

The 1 INT/0 boasts the quality of solidity, precision and cutting capacity of SIMEC’s products but its characteristic is the non-automatic running of work. With the 1 INT/O the operator manually and easily selects the cutting dimension to be done with the help of different stop bars and starts the run of the motorized spindle.

The 1 INT/0 boasts the quality of solidity, precision and cutting capacity of SIMEC’s products but its characteristic is the non-automatic running of work. With the 1 INT/O the operator manually and easily selects the cutting dimension to be done with the help of different stop bars and starts the run of the motorized spindle.

Circular cross cut revolving saw for angle cutting, developed and designed to simplify cuts on small pieces. Ideal for creating tiles and design pieces. The machine is equipped with precision goniometer and it's available with manual or motorized feed.
ADVANTAGES
Revolving cross-cutting machine ARS for anglle cutting:
Available with manual or motorized head feed;
Maximum cutting precision guaranteed by a special beam design;
Head assembly swivelling: +45°, 0°, -45°.

Medium-sized carriage machine for cutting stone material
Very strong cast iron structure, mechanically worked with high quality and precision processes.
The main feature is the remarkable table flowability obtained through special gears, always in oil bath and perfectly protected by stainless steel covers.
Features
THE UNIQUE COMANDULLI A.G.P. FEATURES
The spindle axis is assembled on oil bath bearings and operated by electric motor through V-type belts.
Spindle traverse and vertical movements through a screw controlled by reducer.
Possibility of manual 90° spindle slant to carry out slanted cuts or undercuts.
Bench manual movement through handwheel and reducer/rack kinematic motion.
Bench mounted on reinforced concrete pillars.Two models available:
Disc maximum diameter 800 mm (optional 1000 mm)
Spindle power 15 kW (optional 22 kW)
OPTIONS
There is always enough room for some further desires
Bench with automatic rotation and precision locking each 45°. Electronic positioning on 360°.
Bench rotation visualisation with control 1/100°.
Overturning bench from 0° to 80° with wood loading platform and hydraulic control unit.
Adjustable disc rotation speed (inverter): 700÷2000 g/1’.
Automatic centralized lubrication.