If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Categories:
Stone Block Cutting Machines (23)
Stone Slab Cutting Machines (19)
Stone Tile Cutting Machines (29)
Stone Surface Processing Machines (13)
Resin Line Machines (2)
Stone Finishing, Profiling Machines (21)
Stone Factory Cleaning Equipments (3)
Stone Handling, Loading Machines (55)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
For the transport of heavy tonnage loads inside industries low height and ona axle. These heavy cargo trolleys, made entirely by HERSEN, can support loads of up to 72 tonnes. They are certified and have passed all relevant tests in technological institutions.
The model shown in the photos (Ref 50458) shows an example capable of transporting cargo of up to 14 tonnes in very reduced spaces. The measurements of this particular unit are 3m x 2.6m. However, at HERSEN we design and custom-manufacture any request of this type to meet the client’s requirements.
Our range of industrial trailers come equipped with double wheels to distribute the weight and improve security. Additionally, the rubber surfaces on each wheel are designed to adapt to uneven floors and minimise vibrations on the load. The rotation system means that each one of the wheels adapts to the radius required to manoevre the curve and stabilise the load. The steering has an advanced control system to maintain wheel alignment and thus avoid wear and tear.
The rotating system of industrial trailers can be:
Simple System: With this system, the front wheels rotate following the pulling rudder.
dibujo remolque industrial
The rudder bends vertically to adapt the different hook heights of towing vehicles. The rudder has an adjustable support to adjust the height.
Additionally, the industrial trailer has security bars, which are made specially for heavy cargo trolleys, protecting the operator from the risk of slabs falling during loading and unloading. There are various fitting positions to insert the security bars which can be adjusted according to the number of slabs that have been loaded.
The most commonly used measurements are:
2.5 x 3m for cargo of 12 to 16 tonnes.
References for the HERSEN board package trolley:
50458 Cargo capacity of 14 tonnes simple rotation.
The entire manufacturing process for the transportation wagons and trolleys for cargo, from the initial design to the final on-site installation, is carried out by HERSEN, as well as the training on the use of the equipment, and any technical assistance.
If you require other measurements, features or special applications for this type of industrial trolley, we can manufacture them with different cargo capacities, of up to 72 tonnes. Simply contact us and we will inform you about all the manufacturing options for every type of trolley for transporting slabs.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2995-4C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this cutting line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The motorized roller loading table constitutes the feeding point to the cutting unit. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The cutter with 4 heads on mobile bridge N.8500, is a machine equipped with the latest technological advances in terms of its mechanical and electronic design. Above all, the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table stand out, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on which it moves, to carry out the work. cutting.
The movable disc-holder heads supported on linear guides on the bridge, with recirculating linear ball slides, also carry out the vertical movement guided on recirculating ball slides and driven by a spindle.
laminated with ball recirculation nut, to be able to position with great speed and precision, leaving the whole assembly perfectly protected by PVC bellows.
Headstock equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The whole machine and the heads are equipped with an implantation system with centralized greasing for easy maintenance.
Automatic rotary cutting table, it is built on a steel structure with a rectified upper plane, on which the conveyor belt rests with the outer surface covered with rubber to prevent the sheets from slipping during the cutting phase.
The unloading table with band has a frame built based on steel profiles with a transport band for unloading the cutting table simultaneously, while the cutting unit already receives the next board and is ready to cut.
In the electrical and control installation section, it is worth highlighting the installation of state-of-the-art automatons with programs custom designed by our technicians, so that the programming of the machine is as simple as possible, thus avoiding losses of unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on an operator terminal with a screen, where all the parameters of the cutting cycle are displayed.
The cutting line N.2995-4C/2200-G basically consists of:
– 1 Motorized plastic roller table N.2274
– 1 Cutter with 4 Ø600 heads and mobile bridge, model N.8500-800/4C
– 1 Rotating and motorized band table, model N.2304-G
– 1 Motorized band table for material outlet, N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200
Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS ROTATING TABLE WITH BELT N.2304/2200
Characteristic Specification
table width 2957mm
length max. of the table 4044mm
width max. worked 2200mm
Belt displacement speed 11.5m/min
Drive motor power 4 hp
CHARACTERISTICS OF MOTORIZED BELT TABLE N.2426/2200
Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 3 hp
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Factory Cleaning EquipmentsAir Dust Collector
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
WATER AND AIR FILTER SYSTEM
FILTEREVO
Water filtration systems recycle the water used in stone processing. They help to significantly reduce costs, ensure sufficient quality of the recycled water and enable environmentally friendly operation.
Air cleaning systems are designed to filter 99% of the air in dusty work areas.
The suction cabin of the dry filter system is designed to filter the air in dusty work areas without the need for water and with low noise levels. The filtration system can be adjusted to the type of dust.
The water suction system is a conventional air cleaning system that uses water to moisten the dust during the cleaning process, trapping it in its entirety.
Cruz CNC
Spain
Cruz CNC Technology S.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Hersen Industrial Trailer
The HERSEN Industrial Trailer is a breakthrough in the logistics and transportation of heavy cargo in reduced spaces. These heavy cargo trolleys, made entirely by HERSEN, can support loads of up to 72 tons. They are certified and have passed all relevant tests in technological institutions.
The model shown in the photos (Ref 50458) shows an example capable of transporting cargo of up to 14 tonnes in very reduced spaces. The measurements of this particular unit are 3m x 2.6m. However, at HERSEN we design and custom-manufacture any request of this type to meet the client’s requirements.
Our range of industrial trailers comes equipped with double wheels to distribute the weight and increase safety. Additionally, the rubber surfaces on each wheel are designed to adapt to uneven floors, thus minimising vibrations on the load. The rotation system means that each of the wheels adapts to the radius required to manoevre the curve and stabilise the cargo. The steering has an advanced control system to maintain wheel alignment and thus avoid wear and tear.
The rotating system of industrial trailers can be:
Jumbo System: All the wheels can rotate conforming to the rotation of the pulling rudder to manoevre the curve. This facilitates manoeuvrability and reduces the space necessary to complete the turn. It is especially useful in premises where there is very limited space to manoeuvre.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Handling, Loading MachinesJib Crane
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The HERSEN jib crane is ideal for any job requiring the lifting and transportation of material within a medium-length slewing range. It is a very useful tool in workshops where it is used as the only lifting machine and in areas which service concrete points of the workshop, where the gantry crane cannot reach. It is also a good complementary tool in certain areas of the facilities, when the gantry crane is needed in other areas, thus avoiding wasted time.
This type of device is always made to order so that it can be adapted to the requirements of each individual client. There are different manufacturing models. The client can decide from the following options:
Maximum length of the jib
Maximum height of the jib
Maximum load
Maximum slewing range. This can be either 270º or 360º
Moving the hoist: manual or motorised
Raising the load: manual, using electric hoist or using pneumatic hoist
Slew of the jib: manual or pneumatic
Maximum height of the column
Type of jib: with belt or flush with the top of the column
The column needs to be fixed to a foundation whose dimensions will depend on the maximum load to be lifted and on the length of the jib. The crane comes supplied with an anchor, to be inserted into the foundation for the crane, to which it is subsequently attached.
The model seen in the photos corresponds to a unit recently manufactured at the HERSEN plant. This particular column-mounted jib crane measures 5 metres in height. The column alone has a height of 4.5 metres. The maximum load that can be borne by this device is of 500 kg.
If you are interested in ordering one of these models or would like more information, please do not hesitate to contact us and we can supply all the technical details you need. You can contact us directly using the form, by calling us at +34 96 160 98 05, or by e-mail at our contact address: [email protected].
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Trolley with hydraulic arm for handling installation and for slabs of porcelaine, glass, marble and granit
Ref .: 880-300 Technical characteristics:
Robot Setter for the manipulation, setting up and installation of porcelain, marble, granite and glass slabs
The movement of the robot is done manually
Maximum capacity 300 Kg
(See table of load capacities based on arm length)
Powered by replaceable batteries
It consists of a battery with its charger
Hydraulic boom lift
Manual or hydraulic telescopic arm
Pneumatic rubber wheels
360º swivel attachment at the end of the arm to rotate the suction cup
Lateral and frontal translation of the head
Robot Weight: 250kg
Total weight of the 12 counterweights of the Robot: 250kg
Robot weight + the 12 counterweights: 500kg
Maximum height from the ground to the center of the 4 suction cups with the table vertically: 2.43m
Maximum height from floor to table horizontally: 2.83m
As an option, it can be supplied with an independent 4-plate suction cup with battery and quick coupling to separate the suction cup from the robot. The suction cup, by remote control, can be operated to open and close and can be raised independently.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
One-base Industrial Suction Pads
These are reduced-sized suction pads that have various loading capacities from 100 kg to 800 kg, suitable for smaller-sized pieces.
Their big advantage is that they facilitate and speed up the loading, unloading and handling of parts such as slabs, flooring, steps, cladding, kerbs, etc. Additionally, they can move pieces from a horizontal to a vertical position easily and securely, both manually and automatically.
This product improves the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
They can be operated using compressed air (venturi) or a vacuum pump.
Ref.50701
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Two-base Industrial Suction Pads
Equipment with two-base industrial suction pads on a chassis or metal structure with loading capacities from 250 kg to 800 kg, suitable for longer pieces in order to prevent the product from bending and cracking.
Its great advantage is that it facilitates handling, loading and unloading long pieces such as kitchen worktops.
The two suction pads move independently of each other. Thus, the suction pads can be fixed onto the section of the piece you want, thus avoiding the parts where they cannot be attached, such as holes, gaps, recesses, etc.
Also, the chassis is made with a swing angle, with the aim of enabling you secure the suction pad on counter tops with “L” shaped parts, so that the suction pad fits the shape of these pieces and lifting the marble is made more secure and balanced.
The movement of counter tops from a horizontal to a vertical position is made easy, manually or with a valve.
The two-base suction pads improve the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
The two-base suction pads can be operated using compressed air (venturi) or vacuum pump.
Maximum loading capacity: 500kg.
Ref.50702
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Vacuums for slabs the large format porcelain
vacuums for slabs the large format porcelain
Ref. 50720-8-250
8-point vacuum by compressed air. It is especially recommended for manipulations:
Of box
From box to box
From easel to box
From easel to easel.
-In picking operations it is a very effective and fast option.
-Electric 8-point vacuum: This option is recommended to be placed on overhead cranes. The abatement can be manual or motorized.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Equipped with three suction pads on a chassis or metal structure with a loading capacity of 250 kg up to 1000 kg.
These three-base suction pads lift, move, load and unload large or longer pieces of marble, like counter tops, large slabs or fragile and delicate materials. These are pieces which, in addition to the consideration of the weight to be lifted, need to be lifted from three different points in order to prevent the less stable parts of the piece from splitting, as can happen in cases where they are gripped at only one point. For example, on a kitchen worktop, where there is a gap, the sides are more fragile and thus it is difficult to lift the piece without splitting it. The three-base sucker pad makes it possible to lift the base by gripping various points without it splitting.
Thus, these industrial suction pads lift and handle the marble conveniently, safely and easily.
All the suction pads are independent from each other and so it is possible to move, omit or activate each suction pad according to the requirements of each job (for example, a gap).
The movement of counter tops from a horizontal to a vertical position is made easy, either manually or using a valve.
The three-base suction pads improve the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
They can be operated using compressed air (venturi) or vacuum pump.
Ref.50703
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesConnecting Roller Conveyors
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Trestle with double stowage for boards or slabs, which allows the automatic feeding or stowage of the same from the production lines from one side of the stowage and the manual loading or removal by the operators simultaneously from the other side of the stowage. With this application, machine downtime is reduced, achieving a higher degree of operability and therefore of production of the work lines.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to support loads of 20+20 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Vacuum for forklift with battery
Ref. 50773. Technical characteristics:
For movements of marble, granite and porcelain tiles.
battery powered
Flip from 0 to 90 degrees
Rotator
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Vacuum cup for handling kitchen countertops
Ref. 50790 technical characteristics:
Two-point suction vacuum with adjustable ends for handling L-shaped or square kitchen countertops.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Eight points vacuum for sandwich panels with depressor and radio control
Ref. 50790-8 technical characteristics:
Load capacity: 300kg
Tare: 200kg
Extensible structure with two telescopic arms:
Length collected: 4m
Stretched length: 7m
Tipping equipment in all directions without loss of oil or acids
Balance with ropes to be able to make the turn up to 90º
Suction cups with anti-oil rubber and mounted on a suction cup with springs
Compressed air supply
Pump group with:
Rotary pump
Double tank
Double tap circuit
Visualization and vacuum control
Anti-drop valve
Vacuum filter
Condensation filter
Action with ball valve
Batteries with gel charge and 24 volt power plus spare battery
Acoustic-visual alarm in reference to the minimum / maximum pressure
Accidental anti-drop device
Remote radio control
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Automatic 12 points vacuum with self-supporting structure
Ref. 50760-12
Technical characteristics:
Compressed air supply 6 bar
Electrovalve to catch and release the material
Vacuum indicator
Probe for presence of the material
Load capacity 300Kgs.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Technical Characteristics:
Fixed central structure and mobile arms in tubular structure with high elastic limit.
Equipment with 4 mobile suction pads 200mm
Tilting 0˚-180˚ by mean pneumatic piston
Hydraulic hoses R6
loading capacity charge 200Kgs
Vacuum gauge
No falling non return valve for vacuum
Security system
Safety tank for vacuum reserve in case of accidental failure.
Acoustic and visual alarm of minimum and maximum pressure.
Central handle with the controls.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Technical Characteristics:
Structure 1000x150mm
Tilting from 0˚-90˚ by means of two pneumatic pistons
Equipment with 12 suction pads of 150mm.
Operation by compressed air 6BAR.
Hydraulic hoses R6
loading capacity charge 380Kgs
Vacuum gauge
No falling non return valve for vacuum
Security system
Safety tank for vacuum reserve in case of accidental failure.
Acoustic and visual alarm of minimum and maximum pressure.
Central handle with the controls.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Ref. 50760-1 Technical characteristics:
Fixed central structure and mobile arms in tubular structure with high elastic limit
4 mobile suction cups 500 x 300 mm.
Load capacity 800 kg
Vacuum pump integrated into the suction cup
Inclination from 0º to 90º manual
Display control and vacuum indicator
R6 hydraulic hoses
Anti-fall valve
Vacuum filter
Security system
Acoustic-visual alarm of minimum and maximum pressure
Vacuum reserve tank in case of accidental failure
Central handle with controls
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Ref.50760-2 ELECTRIC VACUUM LIFTER POWERED BY ELECTRIC PUMP AND ELECTRIC TILTING
Technical Characteristics:
Fixed central structure and mobile arms in tubular structure with high elastic limit.
Equipment with 4 mobile suction pads of 500x300mm
Structure with 0˚-90˚ electric tilting
Powered by electric pump on the equipment
Hidraulic hoses R6
loading capacity charge 700Kgs
Vacuum gauge
No falling non return valve for vacuum
Security system
Safety tank for vacuum reserve in case of accidental failure.
Acoustic and visual alarm of minimum and maximum pressure.
Central handle with the controls.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesBlock Turnover-Tilting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Motorized trolley support rails welded to the structure.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to withstand loads of 35 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Suction pad for materials of sizeable dimensions.
Apparatus made up of 6, 8 or 10 150 mm round suction pads, mounted on a metal chassis or structure, with a loading capacity ranging from 250 kgs up to 2000 kgs.
These industrial suction pads are designed in order to move larger-sized slabs, from porcelanic material such as neolith, to delicate marbles or fragile limestone which, due to their large dimensions and characteristics, need to be firmly affixed in order to be moved safely, to prevent them from fracturing.
All of the suction pads work independently of each other, thus enabling them to be moved around, omitted or activated according to the demands of each individual job.
The movement of counter tops from a horizontal position to a vertical one is carried out simply and easily, either manually or using a valve. They can be fitted to gantries, jib cranes, crane trucks and forklifts. They can be operated using compressed air (venturi) or by means of a vacuum pump.
These industrial suction pads benefit the ergonomics of the marble worker, reducing muscle fatigue and the physical strain involved in handling marble.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Industrial vacuum load handlers allow lifting, turning and turning loads as diverse as bags, boxes, containers, drums, pallets, toilets, marble, porcelain and solid surfaces up to 265Kgs. Operation is intuitive, smooth and fast performing all the functions of grabbing the load, raising it, lowering and releasing the load from a single control, the manipulator handle.
Lifting is simple and safe, both for people and for the product. They can be installed to optimize any manufacturing and handling process, in logistics warehouses, for picking and order preparation. Its ergonomics, functionality and safety reduce effort and optimize productivity, reducing user fatigue and injuries.
How does the vacuum manipulator work?
The manipulator uses vacuum to hold and lift the load. The air is guided through a filter and an air pipe, to raise the lifting tube with which the manipulator is equipped. The vacuum within the lift tube is regulated from the manipulator’s control handle. This manipulator is where the suction unit is attached, which is the one that will be in contact with the material to be handled.
When the partial vacuum increases, the lift tube shrinks and lifts the load. When the partial vacuum is reduced, the lift tube is stretched, lowering the load. The sniffer keeps the load safely gripped until it reaches the ground. In the event of power loss or a power outage, a safety valve acts in such a way that the load descends in a smooth and controlled way to the ground.
We have stainless steel handling equipment for the food, pharmaceutical, cosmetic, chemical, and logistics industries. We also carry out special applications for clean areas, corrosive environments and ATEX areas.
What sipper to use?
We develop standard and special suction pumps on request, made to measure according to the type of load, weight, suction surface and the type of handling required for each product and application.
We can handle boxes with the product inside, both open and closed, with seal or staples.
Irregular boxes with fragile products inside the boxes can also be handled and lifted and stacked.
We develop standard and special suction pumps on request, made to measure according to the type of load, weight, suction surface and the type of handling required for each product and application.
We can handle boxes with the product inside, both open and closed, with seal or staples.
How is the vacuum generated?
The vacuum pump is what runs the entire system. The vacuum is generated by means of a high-performance, low-consumption vacuum motor-pump. This motor pump can be installed up to 30m away from the lifting point. A remote control can be installed to operate the pump without leaving the duty point.
Where to install the load handler?
They can be installed on our light profile jib cranes and overhead cranes. The overhead crane or jib crane supports the lifting equipment. We offer a wide range of lifting systems such as column cranes, jib cranes, light overhead cranes, suspension cranes, mono-rail cranes, low height cranes, Bridge cranes with frame structure. We provide from the design to the execution of the “turnkey” tailor-made project for the handling of almost any type of material.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesBlock Turnover-Tilting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
– Motorized block holder carriage for Multiwire Cutter.
– Maximum load: 35 tons.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine has the classic setup of static structure with moving trolley and has an automatic system for changing the thickness between wires. This system makes the machine being very versatile and time saving in changing the thickness of each cut.
·The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process.
· All the steel elements of the structure are subjected to a surface finishing consisting of a deep cleaning and degreasing treatment, a metallization treatment and corresponding protective layers and painting. These treatments enhance the durability of the machine against aggressive weather and working conditions.
· The main motor is direct in the main pulley, and it is controlled by an electronic frequency variator –inverter-, that permits to apply progressive linear speed to the wire and its adjustment to optimize the behaviour and performance of the tool.
· The tensioning of the wire is made pneumatic and automatically and independent for each wire, with indication of wire breakage or shortage.
· The machine has an automatic system for adjusting the distance between wires, instead of having manual devices or having to remove all the wheels manually for changing the thickness of the slabs to be cut.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water.
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The machine has its own mobile compressor, necessary for the pneumatic system for tensioning the wire.
· The trolley is 2.300 x 2.300 mm and has a maximum capacity of 30 Ton. The rotation is manual 360º and can be blocked every 90º.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesGiant Disc Bridge Saw Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Large size block cutter which works with one or more vertical disks and a horizontal disk. Its structure sits on four pillars in order to grant the stability and strenght needed to guarantee an accurate cut.
It is recommended to complete the block cutter with the automatic discharger in order to make the already cut pieces unloading easier.
Different models depending on the amount and the diameter of the vertical disks to be used.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesGiant Disc Bridge Saw Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
NODOSAFER slicers are very solid and precise machines, characterized by their robustness, great production versatility and easy handling.
These slicers are equipped with the latest technological advances in terms of their particular mechanical and electronic design. Particularly noteworthy is the linear guide system of the headstock bridge, supported by two longitudinal beams, parallel to the cutting table, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on which it moves, to carry out cutting work.
All movements have speed regulation through an electronic variator and the motors have a built-in brake to achieve precise stops.
In the management and control section, it is worth noting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, thus avoiding unnecessary waste of time. The programming of the work cycle and the display of its sequence is carried out on an operator terminal with a touch screen, where all the work parameters are displayed, as well as the cutting cycles.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving Robot
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Robot for finishing and palletizing with articulated vacuum suction cup for granite curbs.
It is made up:
Robot mod. KR-360.
Chamfering group, disc housing, water diffuser, etc.
Flame torch, regulators, valves, etc.
Vacuum group, with pump, tank, suction cup, valves, etc.
Electrical panel, and control panel with touch screen.
Belt feeding table.
Curb bumping and squaring device.
Turning table for the elaboration of curbs.
Security fencing to limit access to the mobile part of the machine.
The Robot is specially designed to carry out automated tasks in the performance of curb finishing tasks, milling of edges or rounding, flaming of faces and their subsequent palletizing, based on the same operating principles applied in standard Nodosafer machining and palletizing, and offers multiple advantages: optimization of work processes, reduction of cycle times and efficient use of downtime, etc.
On the wrist of the Robot, a compact and specially designed head is implemented, on which the milling motor group is supported, the torch for flaming, as well as a suction cup for handling.
The reception suction cup, also of a particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 160 kg.
The motorized belt table, located at the entrance of the Robot, constitutes the feeding point to the treatment unit. In addition, it acts as an intermediate warehouse to guarantee the fluidity of the work cycle and minimize downtime for the entire line. It basically consists of a frame based on steel profiles on which the roller shafts rest.
All the wheels are frictioned to thus facilitate the synchronism of the advancement speeds of the tiles throughout the line.
A double device for bumping and squaring located on the band table, allows the positioning and control of the curbs before they are received by the robot.
The turning table for the elaboration of the curbs is located in the work area of the robot and allows to greatly reduce the time during the elaboration process.
The work area is protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
The programming and the work sequence is variable and parameterizable, it is done by selecting from the control panel.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Robot – Palletizer N-3530 with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of the work process, reduction of cycle times and efficient utilization of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 160 kg.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident. All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine is mobile and has an automatic system for thickness changing. These characteristics make the machine being very versatile and time saving in loading and unloading operations as well as changing the thickness of each cut. In this machine the user can input up to 10 different measurements for the thickness of the slabs and the machine will move automatically the wires and also will adapt the movement of the trolley to obtain the desired cuts.
·The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process.
· All the steel elements of the structure are subjected to a surface finishing consisting of a deep cleaning and degreasing treatment, a metallization treatment and corresponding protective layers and painting. These treatments enhance the durability of the machine against
aggressive weather and working conditions.
· The main motor is direct in the main pulley, and it is controlled by an electronic frequency variator –inverter-, that permits to apply progressive linear speed to the wire and its adjustment to optimize the behaviour and performance of the tool.
· The tensioning of the wire is made pneumatic and automatically and independent for each wire, with indication of wire breakage or shortage.
· The machine has an automatic system for adjusting the distance between wires, instead of having manual devices or having to remove all the wheels manually for changing the thickness of the slabs to be cut.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water.
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The machine has its own mobile compressor, necessary for the pneumatic system for tensioning the wire
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
Drilling machine conceived to drill material pieces sides.
It enjoys an innovative design. It is an extremely practical and easy to use model as well as effective and low-cost.
The two headstocks, which self-support the bits and the stops, make the different pieces and structure size regulation faster. The structure is assembled onto four wheels so that it is easer to move.
It can drill a great variety of shapes and it can even spontaneously replace the bit for a small disk. This way can also drill horizontal slots.
Sensational machine in the drilling machines market.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The MEB Profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The trolley is 2.300 x 2.300 mm and has a maximum capacity of 30 Ton. The rotation is manual 360º and can be blocked every 90º
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
HPB-Polisher
Polisher with the abrasives placed on a rotatory plate.
The flex arm is specially designed to be light and easy to use.This way, the worker can drive it easily through all the area which needs to be polished.
At the same time, the flex arm is provided with the operating table so that the grinding wheel work pressure can be confortably regulated and it can adapt to the polishing needs in order to obtain an excellent result.
High-performance and long lifespan machine.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The MEM Profiling machine from GRANI ROC is designed for a high precision dressing of blocks, slabbing and profiling production from stone blocks. The machine is mobile and all the movements are controlled by a CNC panel board. The friendly automation and control of all the systems of the machine along with the characteristic of being mobile, make the machine being very versatile and time saving in loading and
unloading operations as well as changing the thickness and shapes to be cut.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
Par excellence bridge cutter. It allows carrying out any kind of cut with one or more different material sheets.
Its accurate design provides the machine with precision, agility, strength and long lifesspan.
It allows adding technical features and special cut programs in order to adapt the machine to the maximal degree to the specific needs of any workshop (copying device, kitchen programs, cut programs to 0o and 90o…)
Examples of application:
It cuts bath and kitchen counters, floor tiles, skirtings, straight mouldings with copying device and other specific pieces.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
Multidisk cutter
Machine meant to work in an assembly line work. It can obtain one or more material strips from a specific width.
Headstocks can have either one axis with more than one disk or they can have several completely independent headstocks which can be mobile or fix.
Machine with a great production capacity, reliability and strength.
Several models depending on the number of headstocks and the width of the working area so it can easily adapt to every costumer’s needs.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The SPBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks.
The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The structure of the pillars and beam is made of electrowelded and machined tubes. The trolley is composed of electrowelded tubes forming a framework protecting all sensitive parts of the trolley like rod screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
· The movements of the machine are controlled by a 5 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the production of complex shapes as balls, screws, etc.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
·The movements of the machine are controlled by a 6 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the roduction of complex shapes as balls, screws, etc.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite
Machinery Function Features:
It consists of the following elements:
- One roller blocks entry of 1.000 mm.
- One set goteron 4 hp.
- Six Polishers with drive motors and automatic stop programmatically de 2hp x 6 = 12h
- One top chamfering + One lower chamfering with drive and automatic stop programmatically.
- One roller block output 1.000 mm.
- All sealed oil bath heads.
- Heads in sealed boxes liquid fat.
- One conveyor belt with variator and regulation me chanical speed 2hp.
- Vulcanized conveyor belt drive pulley to ensure greater adherence.
- One stainless roller assembly with automatic pneumatic accompanying regulation up and down, depending on the thickness of the stone work. (For working different thicknesses continuously).
- One telescopic stand with wheels for long piece accompaniment.
- Thickness polish 6 cm.
- Dimensions of the machine: 6500 long x 1900 width x 1655 mm high ( with entry and exit rollers included ).
- Total installed power: 26hp -
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesGantry Crane, Overhead Cranes
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
REFERENCE
108 031 025 MACHINE FLAG MURAL ARM DONATI
FEATURES
TURN 180º
250 KG AND 500 KG OF ELEVATION
ELEVATION AUTOMATIC BY BUTTON
LONG ARM 4 AND 5 MT
EIGHT UNITS AVAILABLE. -
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
2nd Hand Pedrini CNC Bridge Cutting Machine
Spain
Suministros y Abrasivos FERAGU S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesJib Arm/U Type Container Loader
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
108 003 140 Charge Tables Jib Arm U Type Container Loader
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesJib Arm/U Type Container Loader
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Container loader Boards
HELPFUL uploads and downloads PACKAGES OF TABLES
Undoubtedly one of the most efficient in the process of boosting transport marble tables tools. This tool allows upload and download packages of tablets in closed containers with the crane, as reflected in the next picture.
features
Weight: 1,440 kg.
Max Load Weight: 4 Tons
Crane load. Min 5 Ton
Dimensions: L 6000 mm. X 1500 mm
Spain
David y David Machinery for Quarrying
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
CNC stoneworking center with reduced dimensions.
Based on HCT-A model, we create a new stoneworking center which is more compact. In this way we put forward a high quality and strong machine with the necessary dimensions so that it can be placed in smaller workshoops.
It has a warehouse which is provided with 15 tools and it also has a working surface of 2600x1450mm, so that it allows to produce the most common stones for sinks and cooking tops.
Thanks to the innovative programming system of Canigó, the software which controls the machine is based on icons so it is extremely easy to use. It is not needed a special computer knowledge.
HCT-A compact machine is the opportunity for automate any workshop without the handicap of the machine dimensions and price.
UNIVERSAL WORK CENTER model HCT-A compact
STANDARD TECHNICAL CHARACTERISTICS
MOTORS
Disk motor power................................................................................ 5,5 KW
Adjustable turning speed of the head engine...................................... 7000 rpm
HEAD
No titling head.
Cutting systems................................................................................... Drill
Systems of the tools fixation............................................................... Automatic
AXIS STROKES AND MOVEMENTS
Vertical stroke of the head (axis Z)..................................................... 400 mm
Vertical movement of the head........................................................... Automatic
Transversal stroke of the bridge (axis Y)............................................ 1450 mm
Transversal movement of the bridge................................................... Automatic
Longitudinal stroke of the bridge (axis X)............................................ 2600 mm
Longitudinal movement of the bridge.................................................. Automatic
TABLE
Useful table surface…......................................................................... 2600x1450 mm
AUTOMATISMS
Laser pointer for the positioning of the material.
Automatic system of change of tools.
STRUCTURE AND COMPONENTS
Store of tools for 15 units..
Fixation of the material through adjustable suction pads.
Centralized lubrication.
Remote control for the manual positioning of the head.
TECHNICAL DATAS
Pressure of compressed air................................................................ 6 bars
Approximate net weight of the machine and accessories................... 4000 Kg.
External sizes of the machine............................................................. 4810x2950x2920 mm
INCLUDES THE FOLLOWING SERVICES
Vacuum plant with 4 suction pads of double effect of 120 mm.
Basic kit of tools and locking cones.
Training course
Spain
Maquinaria Canigo , S . A .
Contact Supplier
Have a Question? Ask our expert
Ask now
