Quartzite Backhoe Squaring Chain Saw in Italy

Chain saws machines, Stationary machines for laboratory / sawmill

Chain saw machine

The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna.

The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.

Arms and chains are available for cutting up to 3.25 meters.

Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials:

chains 38/40/42 mm with 8 edges tools

42 mm chain with 4 edges tools ;

38/40/42 mm chain with PCD tools for hard stones

TECHNICAL FEATURES

Terna CST 965

Arm rotation 90°

Vertical stroke 3000 mm

Orizontal stroke 2000 mm

Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m

Cut width 38-40-42 mm

Weight of cutting unit 3500 kg

Total weight, including tractor 10.000 kg

Grease tank capacity 7 kg

Grease capacity 0,3 – 1 kg

Hydraulic oil tank capacity 150 litri / litres

Diesel comsumption 7 – 10 l/h

Round per minutes of the chain rotation pinion 65 rpm

Round per minutes of the diesel engine 1400-1500 rpm

Rear gear movement maximum slope 21%

Accessories for chain saw

VACUUM

Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.

The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.

The vacuum can be installed on a trailer moving on the rails along with the chain saw.

The waste material is deposited on the ground, in the opposite side of the cut.

WORM

Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.

The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.

CHAINS

1 – CHAIN PITCH 121MM

Larghezza di taglio 38 mm

Sono disponibili portainserti per utensili tipo:

– WIDIA 8 Taglienti

– PCD Ø 13 mm

– PCD 8 mm

2 – CHAIN PITCH 110MM

Cutting width 42

Available toolholders for tools type:

– WIDIA 4 Cutting edges

– PCD Ø 13 mm

– PCD 9.4 mm

3 – MONO-LINK CHAIN 74 MM PITCH

Cutting width 42

Available toolholders for tools type:

– WIDIA 4 Cutting edges

– PCD Ø 13 mm

– PCD 9.4 mm

MOBILE CHAIN SAW FOR SQUARING BLOCKS Chain saw on tractor JCB
The Fantini cutting system has been produced for squaring the blocks on the face wall as well as in the working areas of the quarry. The cutting unit is transported on a wheeled tractor fast moving and positioning in front of the blocks to be squared. The whole operation is fast and does not need any auxiliary personnel nor water.
Power: 68,6 Kw
- Weight of tractor t: about 7.000 Kg
- Weight of cutting unit: 2.000 Kg
- Arm rotation: 90°
- Useful cut up to 4 m.
- Chain speed: 0-0,7 mt/sec
- Cutting thickness : 38 mm
- Tractor translation speed: 40 km/h

Chain saws machines, Stationary machines for laboratory / sawmill

Chain saw machine

The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna.

The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.

Arms and chains are available for cutting up to 3.25 meters.

Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials:

chains 38/40/42 mm with 8 edges tools

42 mm chain with 4 edges tools ;

38/40/42 mm chain with PCD tools for hard stones

TECHNICAL FEATURES

Terna CST 965

Arm rotation 90°

Vertical stroke 3000 mm

Orizontal stroke 2000 mm

Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m

Cut width 38-40-42 mm

Weight of cutting unit 3500 kg

Total weight, including tractor 10.000 kg

Grease tank capacity 7 kg

Grease capacity 0,3 – 1 kg

Hydraulic oil tank capacity 150 litri / litres

Diesel comsumption 7 – 10 l/h

Round per minutes of the chain rotation pinion 65 rpm

Round per minutes of the diesel engine 1400-1500 rpm

Rear gear movement maximum slope 21%

Accessories for chain saw

VACUUM

Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.

The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.

The vacuum can be installed on a trailer moving on the rails along with the chain saw.

The waste material is deposited on the ground, in the opposite side of the cut.

WORM

Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.

The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.

CHAINS

1 – CHAIN PITCH 121MM

Larghezza di taglio 38 mm

Sono disponibili portainserti per utensili tipo:

– WIDIA 8 Taglienti

– PCD Ø 13 mm

– PCD 8 mm

2 – CHAIN PITCH 110MM

Cutting width 42

Available toolholders for tools type:

– WIDIA 4 Cutting edges

– PCD Ø 13 mm

– PCD 9.4 mm

3 – MONO-LINK CHAIN 74 MM PITCH

Cutting width 42

Available toolholders for tools type:

– WIDIA 4 Cutting edges

– PCD Ø 13 mm

– PCD 9.4 mm

MOBILE CHAIN SAW FOR SQUARING BLOCKS Chain saw on tractor JCB
The Fantini cutting system has been produced for squaring the blocks on the face wall as well as in the working areas of the quarry. The cutting unit is transported on a wheeled tractor fast moving and positioning in front of the blocks to be squared. The whole operation is fast and does not need any auxiliary personnel nor water.
Power: 68,6 Kw
- Weight of tractor t: about 7.000 Kg
- Weight of cutting unit: 2.000 Kg
- Arm rotation: 90°
- Useful cut up to 4 m.
- Chain speed: 0-0,7 mt/sec
- Cutting thickness : 38 mm
- Tractor translation speed: 40 km/h