If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The technology:
Wire cutting machines are increasingly used for block cutting, mainly in hard stone, and for automatic cutting of curved shapes ( profiling and contouring ). They are based on a system of axes, each with a specific function. Each machine is equipped with a PC-based CNC which runs all system operations and manages the axes movements.
Main benefits of wire cutting:
Although tool costs for wire machines are still currently greater than those for the cutting wheel, the signs are reversed in terms of energy cost: wire machines have distinctly lower power consumption and the high cutting speed also partly compensates for the higher tool costs.
Because the wire is constantly in contact with the stone to be cut, the speed advantage is up to 30 percent depending on the material and the wire condition.
Types of wire cutting machines:
Our range of wire cutting machines includes 4 types:
The 2-axis
The 2-axis jumbo
The 4-axis
The 6-axis
Axis X: horizontal trolley movement
Axis Y and V: vertical independent movements for the columns
Axis B: 360-degrees rotating table
Axis C and Q: rotating heads
The 2 and 4 axis models will provide the same cutting and contouring possibilities but the 4-axis works faster.
The main advantage of the 6-axis model is that it can cut helicoidal, conical and asymmetrical shapes thanks to its fully computerized 6 axis ECS CNC system which controls 6 brushless AC servo motors.
Features:
A PC-based CNC operates the entire system and manages the axes movements. The general management program includes fixed cycles and special executions. The input of data is very easy and the system allows for a graphic simulation of the profile,also showing the path of the tool. The starting point of the operations is from a block with automatic repositioning and the resolution of the tangential connections is done automatically. A RS-232 connector and a printer plug are installed on board.
The inverter allows for a variety of wire speeds and the cutting of both marble and granite at optimum speeds.
Pneumatic wire tensioning system
CAD-CAM Alphacam
The wheel covers are made of aluminum composite panels and their structure is stainless steel. The stainless steel strip around the wheels prevents the diamond rope from getting tangled in the wheel in case it breaks.
All covers are in stainless steel.
The guides on the column are in stainless steel, hardened and then covered with hard chrome.
All axes are equipped with high precision ball-screw assembly
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
FOB Price:$40000-50000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The single-wire saw block square machine is specially designed for different stone trimming and thicker slab cutting, it adopts computer digital control, four-axis linkage, stable cutting, and has the automatic cycle function of moving vertical movement to cut and process slabs, automatic cutting board by board, it is an ideal equipment for mining, automatic cutting and squaring stone.
CHEERSURE
China
SHANGHAI CHEERSURE INTERNATIONAL TRADING COMPANY
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
FOB Price:$32000-40000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC-2000-2500-3000 adopts CNC control, Four-Axis linkage, which can process the circular stone slab, roman column, numeral, letter, Chinese characters and other designed shapes.
1. It has heavy load bearing structure, four orbits on each upright column, adjusted the balance by the rollers, with less friction and higher precision.
2. The left and right frame achieve synchronized lifting by steering equipment on the upper frame. The lifting accuracy increased by the conbine of lead screw and double nuts.
3. Cantilever part, firstly the lead screw and pole adjust the distance of guide wheel,guide wheel is controlled by CNC. Secondly in order to make the diamond wire rope cutting direction coincidence, reducer control the guide wheel rotating angle.
4. Worktable is running by lead screw and railway.
5. There has automatic alarm and memory function if wire broken, on top of it.
6. Aluminum wheel diameter is 1600mm.One fly wheel slide through sheave, oil pump control rope tension.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
FOB Price:$34000-38000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
This machine can cut stone to any shapes in 2D.
Its control system is CNC, can program on machine cabinet, also can draw CAD on computer.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
FOB Price:$45000-55000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
China Xianda marble granite stone block diamond wire saw edge cutting machine adopts Four-Axis linkage with stable cutting, used to trimming the six surfaces of the stone block, also can cut the block to slab, which is the ideal equipment for cutting the block, and trimming stone block.The special design for 360° worktable will fullfil your need, somemore this machine is able to compatitable with CNC system. Once changed, it will have multi-function with can process the column slab,pillar,roman column,numeral, letter, Chinese characters and other shapes for the stone.
Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
Keywords: diamond wire saw machine, block cutting machine, stone trimming machine
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$60000-66000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Discovery 5 adopts 5 axis CNC control systerm,It can process different size arc slabs, column, number, Letter also different shapes of marble or granite.
and It can also process 3D shapes, Main body with advanced and unique structure, makes its cutting with excellent priecision, stability, efficiency etc advantages. its the ideal equipment for processing the specail shapes stone.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$30000-50000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
1) Equipped with CNC system, which makes the man-manchine interface easy and flexible.
2) Flywheels tension has a stable, constant stretch mode to enhance cutting accuracy.
3) Cutting speed is adjustable according to different requirements.
4) High efficiency, the slates it processed are of exact size, and the margin is flattened and sleek.
Wisdom
China
QUANZHOU WISDOM MACHINERY DEVELOPMENT CO., LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$30000-50000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
1) Equipped with CNC system, which makes the man-machine interface easy and flexible.
2) Flywheels tension has a stable, constant stretch mode to enhance cutting accuracy.
3) Cutting speed is adjustable according to different requirements.
4) High efficiency, the slates it processed are of exact size, and the margin is flattened and sleek.
Wisdom
China
QUANZHOU WISDOM MACHINERY DEVELOPMENT CO., LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$30000-360000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
This machine is controlled by computer numerical control, four axis linkage, can process different specifications of arc, cylinder, Roman column, numbers, letters, Chinese characters and other complex shapes of marble, granite, high processing accuracy.
KAIDA
China
Fujian Province Kaida Stone Machinery Co.,Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$60000-70000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Discovery 5 adopts 5 axis CNC control system, it can process different size arc slabs, column, number, letter, Chinese words also different shapes of marble or granite.And it can also process 3D shapes. Main body with advanced and unique structure, makes its cutting with excellent precision, stability, efficiency etc advantages. It's the ideal equipment for processing the special shapes stone.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$32000-38000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Discovery 4 is our Ultimate version in CNC Diamond Wire Saw Machine .Lifting structure adopt 16 surface slideway, 28pcs rolling wheels structure. Trolley using double nut structure ,the track using steel frame-type reinforcement structure; Cantilever gearbox use S-type channel waterproof structure ,Main motor have variable frequency speed control function,with more advantages during processing , like cutting more precision ,precision more durable,cutting more stable,more efficiency,etc.Meanwhile this machine adopts CNC control , four-spindle linkage, which can process the circular stone slab, column , numeral, letter, Chinese characters and other shapes for the stone.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$43000-48000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC-3500 adopts CNC system ,four linkage,use 16 surfaces slideway , 28pcs rolling wheels struture. And synchronous lifting through intermadiate drive ,with 360 rotary trolley , cutting stable and with high effciency , it can dress 4 surfaces. Moreover , as it's with CNC system ,it can process the column slab ,pillar ,numeral ,letter ,Chinese characters and other shapes for the stone.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$60000-66000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Fujian Xianda DISCOVERY 5, Discovery 5 adopts 5 axis CNC control system ,it can process different size arc slabs ,column, number, letter, Chinese words also different shapes of marble or granite.
And it can also process 3D shapes, Main body with advanced and unique structure ,makes its cutting with excellent precision, stability ,effciency etc advantages.It's the ideal equipment for processing the special shapes stone.
XIANDA MACHINERY
China
FUJIAN XIANDA MACHINERY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Wire cutting machines management up to 10 axes
Erotag is the CAD / CAM software for wire cutting and shaping machines that can interpolate up to 10 axes.
It is suitable for program profiling, roughing of blocks and to create complex shapes, such as; cylindrical columns and conical shells for covering the columns, templates for furniture, stairs and frames.
OPERATION
Erotag allows the user to freely assign the machining cycles and the order of items to be processed.
The 2 or 4 synchronized axes is useful for cylindrical or constant conical machining while the 4 or more independent axes contouring allows variable conical machining in which profiles on the two planes of interpolation (typically XY and UV) have different shapes.
Possible options, such as slowing down, can be assigned automatically or manually as well as linear unloading, circular unloading, pausing on edge work, work regimes and synchronization points. The start and stop points on the profile are independent on the two planes of interpolation.
Erotag is part of the CAD Logotag that allows users to generate the machining profiles in the simplest and quickest way, without using third-party drawing programs.
Taglio
Italy
Taglio S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is designed to cut decorative profiles from stone blocks. It is equipped with 2 flywheels with a diameter of 2,350 mm and 2 pairs of small flywheels with a diameter of 400 mm to guide the rope in any direction. Small flywheels are mounted on movable arms to reduce the distance between them and the material and increase the precision of the cut. The flywheel motor is equipped with an inverter to adjust the circumferential speed of the rope.
Socomac
Poland
Euro Arss S.C.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Ideal for cutting complex shapes automatically.
Features
Diamond wire machine for profiling of flat workpieces.
Cutting capacity of all circular shapes from 520 to 3000 mm in diameter.
The vertical capacity of the TSC400 is from 20 to 400 mm maximum thickness.
The machine is very compact.
Mechanically welded frame for perfect rigidity.
Roller table rotatable over 360°.
Precise cable tension by pneumatic control.
For better use, the machine includes a console with a touch screen and a control handle.
This diamond wire machine has a manual laser learning system and a visualization of the shape to be cut on the screen (cutting simulation).
Applications
Ideal for the decoration, funeral and construction industry.
https://www.thibaut.fr/en/machine-tsc400-diamond-wire-saws-monument/
Thibaut
France
Thibaut S.A.S.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Sandstone
Machinery Function Features:
New Breton machine for cutting blocks and billets using a diamond wire, ideal for producing cylindrical/tapered columns, casings for columns, shaped and rough-hewed components for interior decoration through the interpolation of up to 10 axes.
FUEGO'S KEY FEATURES
The Fuego has two opposite "carriages" that move vertically independently on guides that have ball screws (protected by bellows). While one trolley is equipped with a motor and driven pulley, which are both 1,000 mm diameter, the opposite one has two 1,000 mm diameter driven pulleys. The tautness of the tension pulley is maintained by a pneumatic cylinder.
Two pairs of guidepulleys of 300 mm diameter ensure the precise guidance of the wire near the entrance and exit of the block to be cut.
The machine is equipped with a 6 wheel motorized trolley (3 of the trolley are a “V” profile wheel) with a motorized rotating loading platform.
The traverse and rotation axes of the trolley, which are interpolated with the downward movement of the diamond wire, allows the Fuego to perform complex profiles.
This machine can cut blocks with maximum dimension of up to 1,800 mm in height with a diamond wire that can incline up to +/- 20°, requiring a 300 mm recession in the foundation on either side of each column. With the wire parallel to the trolley surface, the distance between the diamond wire and the surface itself is 2,200 mm.
The deflection of the wire during the cutting operations is controlled by the operating system of the machine, based on the position of the tension piston that adjusts the cutting speed to always ensure the perfect accuracy of the finished product.
The electrical cabinet contains a digital inverter that controls the power of the main motor, drives for driven motors for the axes movement, and an NC unit and a color touch-screen operating panel.
Italy
Breton S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Sandstone
Machinery Function Features:
FUEGO 4X reflects the innovative and technological spirit of Breton.
It is a machine suitable for block shaping and slab/small blocks cutting, capable of interpolating 4 axes.
It is usually equipped with a motorized block-holding trolley with brushless motor and loading platform; it enables to execute profiles such as columns, frames and shapes for funerary art and interior decoration, by interpolating the vertical cutting axis with the trolley advance horizontal axis.
Designed on the basis of the single-wire machine "FUEGO Multiaxis", it is equipped with special wire-driving drums which can be oriented adjacent to the entrance and exit of the wire from the block in order to follow the cutting direction.
It is equipped with special drives for axis positioning and with a powerful, user-friendly, CAD/CAM programming software to be installed on the customer’s computer.
Breton Fuego 4X represents the quintessential innovative and technological spirit of the company.
The machine, which can interpolate up to 4 axes, is designed for shaping and dimension sawing of large and small blocks by means of a diamond wire to create complex geometries.
Italy
Breton S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The MEB Profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The trolley is 2.300 x 2.300 mm and has a maximum capacity of 30 Ton. The rotation is manual 360º and can be blocked every 90º
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The MEM Profiling machine from GRANI ROC is designed for a high precision dressing of blocks, slabbing and profiling production from stone blocks. The machine is mobile and all the movements are controlled by a CNC panel board. The friendly automation and control of all the systems of the machine along with the characteristic of being mobile, make the machine being very versatile and time saving in loading and
unloading operations as well as changing the thickness and shapes to be cut.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The SPBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks.
The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The structure of the pillars and beam is made of electrowelded and machined tubes. The trolley is composed of electrowelded tubes forming a framework protecting all sensitive parts of the trolley like rod screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
· The movements of the machine are controlled by a 5 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the production of complex shapes as balls, screws, etc.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
·The movements of the machine are controlled by a 6 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the roduction of complex shapes as balls, screws, etc.
Grani Roc
Spain
Grupo Hedisa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC system with 4 controlled axes for two dimensional profiling of marble, granite and other ornamental stone blocks, usiing diamond wire; can also be used for block dressing and slabbing.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC system with 6 controlled axes for two and three dimensional profiling of marble, granite and other ornamental stone blocks, using diamond wire.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Developed Software which allows easy programming without requiring the presence of the operator during operation.
The diamond wire operated motor which controls the inverter, for a change in the speed of the wire if needed.
CAD-CAM allows to create the working file and to convert it in the machine language for the working execution.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Polar Junior is made to cut the stone in various designs, for artistic purposes.
Artistic diamond wire machine with vertical direction of the wire and a bench on which moves the material to be processed. Metal construction, which receives the appropriate heat and corrosion treatment. It is suitable to any working situation.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
CNC system with 4 controlled axes for two dimensional profiling of marble, granite and other ornamental stone blocks, usiing diamond wire; can also be used for block dressing and slabbing.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Artistic diamond wire which creates straight or curved surfaces by combining two axes of flexibility for the machine.
Developed Software which allows easy programming without requiring the user's presence during operation.
The diamond wire operates with a motor controlled by inverter, for a possible change in the speed of the wire if needed.
It also has CAD-CAM program to convert the file into an executable form.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Robot Space 2600
CNC system with 6 controlled axes for two and three dimensional profiling of marble, granite and other ornamental stone blocks, using diamond wire.
Maximum cutting length : 2,6 m
Maximum cutting height : 1,70 m
Installed power : 27 CV
Linear speed of diamond wire : 0 ÷ 40 m/sec
Length of diamond wire : 15,5 - 16,6 m
Rotation of block bearing trolley : 360°
Weight : 10 T
Shipping volume : 50 m3
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$31000-39000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone
Machinery Function Features:
Introduction
CNC Wire Saw Machine uses computer numerical control and four-axis linkage. It can process various complex marble and granite shapes, such as circular plate cylinders, Roman columns, numbers, letters, Chinese characters, etc. with high processing accuracy and good quality.
Working Principle
The working principle of the CNC Wire Saw Machine is to use a diamond wire saw as a cutting tool, and with the careful cooperation of computer numerical control, it can accurately cut the stone. A diamond wire saw is made of multiple diamond grits evenly distributed on the wire rope. Its hardness and wear resistance far exceed ordinary steel, and it can easily cut stones of various hardness.
Technical Features
CNC Wire Saw Machine integrates many advanced technologies. Its main features are as follows:
High-precision processing: It adopts computer numerical control technology, four-axis linkage, precise and controllable motion trajectory, and processing accuracy can reach ±0.1mm, which meets the needs of complex stone processing.
High-efficiency cutting: Diamond wire saw is extremely sharp and has a fast cutting speed, which is dozens of times the efficiency of traditional manual cutting, greatly improving production efficiency.
Wide processing range: It can process various shapes of stone, including straight lines, arcs, special shapes, etc., without pattern restrictions, and can easily achieve precise cutting of complex shapes.
Excellent processing quality: The cutting surface is flat and smooth, without chipping or cracks, the stone texture is clear and natural, and the finished product quality is high.
Simple operation mode: The CNC system has a friendly operation interface. You only need to enter the processing size and pattern to automatically complete the cutting process. The operation is simple and easy to learn.
Application field
CNC wire saw machines are widely used in various fields of stone processing, including:
Architectural decoration: stone curtain walls, stone railings, stone stairs, stone elevator door veneers, etc.
Indoor decoration: stone countertops, stone background walls, stone wash basins, stone crafts, etc.
Tombstone carving: cutting, grinding, hollowing out of tombstone stones, etc.
Crafts production: stone sculptures, stone reliefs, stone murals, etc.
Special processing: special-shaped stone cutting, stone micro-cutting, etc.
6YR
China
Quanzhou DAFON Machinery Co., Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Sandstone
Machinery Function Features:
The machine is mainly used for grinding and polishing marble slab. It has high flatness and gloss. Controlled by PLC system, It is easy to operate and its performance is steady. grind heads can move up or down by adjusting the Air pressure. The worktable is controlled by hydraulic system. there are two options for the structure of this machine including the integrated type and the separated type.
5YR
China
XIAMEN SHUINAN MACHINE CO.,LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$30000-50000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
1) Equipped with CNC system, which makes the man-machine interface easy and flexible.
2) Flywheels tension has a stable, constant stretch mode to enhance cutting accuracy.
3) Cutting speed is adjustable according to different requirements.
4) High efficiency, the slates it processed are of exact size, and the margin is flattened and sleek.
Wisdom
China
QUANZHOU WISDOM MACHINERY DEVELOPMENT CO., LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$30000-360000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
This machine is controlled by computer numerical control, four axis linkage, can process different specifications of arc, cylinder, Roman column, numbers, letters, Chinese characters and other complex shapes of marble, granite, high processing accuracy.
KAIDA
China
Fujian Province Kaida Stone Machinery Co.,Ltd.
Contact Supplier
Have a Question? Ask our expert
Ask now
