Granite 5 5 in France

This all-in-one 5-axis machine is capable of saw like a sawing centre, to a machine like a machining centre and to polish like a polishing centre.
You will not believe your eyes!
A sawing, machining and polishing power
The electro-spindle has been entirely developed by Thibaut and enables the combination of the performance of:
• A sawing spindle
• A machining spindle
• A polishing spindle
The T952 enables to make the operations of several Machines in one: straight cut, inclined cut, flat polishing, 3D shaping, drilling, edge polishing ….
It is also possible to process thicknesses of 8 inches.
This new THIBAUT spindle coupled with the new THIBAUT 5-axis head enables to combine the performances of 3 machine types while offering more sturdiness and accuracy in the realization of operations enabled by this machine.
Entirely developed by THIBAUT, it offers a very high sturdiness (transmission by cyclo reducer without play). The cross laser enables precise positioning of the vacuum pods on the table.
A very fast return on investment
This all-in-one machine will enable you to make all your sawing, machining and polishing operations. Hence, you will use it intensively and more than if you had 3 separate machines, for a reduced investment. Your return on investment will therefore be quicker.
Its frame and galvanized walls are guaranteed against rust. Its sturdiness guarantees durability, constant accuracy and reliability over several years.
Moreover, its very sturdy technical table is designed to last. Your operators will have to be trained only on one machine for operating and maintenance of this machine. You will therefore be able to save on maintenance costs by having only one machine.
Thibaut machine T952, all-in-one serie. Polishing, sawing, machining
Numerous functions in a reduced space
Buying a workshop or extend a building can be expensive. This « all-in-one » solution allows you to make all the operations of 3 different machines, with only one machine.
Thanks to its versatility, this machine can be adapted to some workshops in which several machines cannot fit.
The linear tool magazine can receive up to 47 tools. It is possible to install several tool magazines.
Design, ergonomics and safety
The T952 is the first machine of the new THIBAUT machine range for which the design has been entirely rethought.
The door structure is self-supporting, without contact with the ground (no foundation required). Those new doors offer a reinforced safety thanks to their dimensions and components.
The door panels are made of transparent polycarbonate with a large glass surface and a big screen directly integrated into the door, easing access to the control panel for the operator while having good visibility of the machining area.
Above the stainless steel control panel, a lighting strip gives signals to the operator during processing (colour code or messages).
To enable the operator to lay documents, an ergonomic tablet is installed under the control panel.
Programming
The machine comes with the very latest user-friendly « Pilot » interface, for more efficiency and speed.
Thanks to the multi-touch screen and control panel built-in to the door, you will be able to command the machine from the end of your fingertips, while having visibility on the working area.
The lighting strip installed above control panel brings information on the progress of the machining.
New functions have been added with this THIBAUT Pilot such as configuration and control of tools according to materials, machining simulation, a library of parametric shapes.
It is possible to prepare the programs on a computer (software T’Cut, eT’cam…) or directly at the machine.

The TC625 is a true numerically controlled 5-axis sawing and shaping center. It can automatically make cuts in all directions and profile parts of any shape. Ideal for decoration and monuments.
Technical data:
Working capacity in mm
Stroke X 3970
Stroke Y 2300
Stroke Z 500
Sawing capacity in mm
Cutting thickness 200
Min. disc diameter 300
Max. disc diameter 650
Standard equipment:
Cross Laser Line Laser
Mechanically welded walls Quick-opening housing
Touch-screen remote control Working table 3600x2000mm
Retractable front stops Machine doors with 19″ console
Electrical cabinet 1/2 gas adapter for tools
https://www.thibaut.fr/en/bridge-saw-tc625-5-axis/

The TC725 is a true 5-axis numerically controlled sawing and shaping center. The TC725 can automatically cut in all directions up to 250 mm thick or profile workpieces of all shapes. The 360° rotation of the head does not require a rotary table, which makes it a very compact machine.
Powerful, the TC725 has a spindle up to 19.9 kW (S6). Its variable speed from 0 to 6000 rpm and its various options give it a very high degree of autonomy and allow it to carry out all types of operations such as drilling, profiling, trimming, sawing, mitre cutting, brushing, etc.

The TC1200 is a genuine 5-axis numerically controlled cutting and shaping centre. It allows cuts to be made in all directions automatically without moving the slab.
Very innovative, the TC1200 allows you to carry out very simply and with very high precision all cuts in materials up to 425 mm thick.
Standard equipment:
Cross Laser Line Laser
Lubrication unit Remote control
Touch-screen 15″ console


Optional extras:
Fixed, mobile or tilting table Tool sensor
Camera
Software:
Included:

Express Jobs Powerful program including parametric shapes, very easy to use
Optional:

T’Shape 3D shaping software
T’Cut 2D cutting software
Vein Matching Software Software for 3D visualization of pieces with their veins
eT’CAM 2D shaping software designed for decoration
T’CAD/T’CAM 3D design and shaping software
Available versions:
Track lengths available :
*5880 mm
*8505 mm
*11130 mm
*13755 mm
*16 380 mm

5 axis CN machine (3 or 5 interpolated according to the versions), the TC1350 V2 permits to make cuts in all directions automatically without moving the slab.
The 360° disc rotation does not require any turning table.
Standard equipment:
Cross Laser Line Laser
Lubrication unit Remote control
Touch-screen 15″ console 1 disc housing Ø1650 mm
Optional extras:
Fixed, mobile or tilting table Tool sensor
Camera Tool magazine 11 slots
Available versions:
Track lengths available :
*5880 mm
*8505 mm
*11130 mm
*13755 mm
*16 380 mm
https://www.thibaut.fr/en/machine-tc1350v2-multipurpose-sawing-center-5-axes-monument-building-landscaping-other-industries-other-materials/

HIGH PRECISION HIGH PRESSURE WATERJET
The cutting system is a high pressure water jet up to 4150 Bar/ 60 000 PSI (optional : 6000 Bar / 87 000 PSI ) generated by an intensifying pump. This high pressure water is concentrated into a fine but very powerful water jet after going through an orifice.
In a mixing chamber just after the orifice, abrasives are added to the jet which reach a speed of 900 m/s almost MACH 2. It then goes in a focalization tube to be projected onto the work-piece. The result is an abrasive jet of less than one millimeter diameter capable of cutting the hardest materials.
WORKING TABLE OF LARGE DIMENSION
A large working table enabling to cut the pieces of dimension 4000×2000 mm (TWJ4020).
Thanks to the mobile machine arm, access to the table is eased. The operation can lay the slabs from all the table sides.
The working table is composed of galvanized vertical blades (S shape), stainless steel frame and grates on tank bottom for recovering of waste material which might have fallen.
Water level variation by Ballast system (quick and ecological). By raising slightly the water level above the slab one can cut with the same efficiency yet reducing drastically the sound level.
AUTOMATIC SYSTEM CONTROLLED BY NC
The NC controls the head movement following the program written into the NC or on PC.

The T’CUT software is identical to the software of the THIBAUT NC sawing machines.
Work-pieces are positioned on the working table. The table is in a stainless steel tank full of water.
Most of the materials do not require any clamping. The water in the tank absorbs the jet residual energy. The working table as well as the abrasive suction pipes positioned in the tank bottom (only with option abrasive muds evacuation) can be damaged or worn out by the jet if left idle a certain using time but can be replaced easily.
VERY HIGH PRESSURE PUMP
The VHP pump is integrated in the machine frame (back side) for a space optimization. It is entirely controlled by the NC. The pressure is variable from 500 to 4150 bar / 7250 to 60000 PSI via IHM (option 6000 bar / 87 000 PSI).
This enables to drill with low pressure to avoid any splash or material breakage when jet is opened in full material. Then, the NC controls high pressure automatically.

Machining center T858 V2, with its 5 interpolated axes, is a versatile machine with high performances to achieve complex 3D shaping and polishing operations for architectural concrete market. The T858V2 has a very performing software specially developped for strong materials industry.
The compact spindle brings great neatness in machining operations, and the maximum speed of 10,000 rev/min allows the use of very small diameter tools, such as engraving tools. Available in several versions : monobloc, concrete or welded walls (several lengths of runway available). Depending on the version, the number of locations in the tool magazine varies from 36 to 135, allowing a wide operating range.
Exclusives THIBAUT equipment
Pneumatic pressure associated with the spindle
World premiere on a 5 axis machining center: working in all directions and automatically controlled. Allows polishing of surfaces, arrows, fleeing chamfers and thick edges. Arises quality and speed of polishing, reduces tools wear.
B3 head with oscillating segments (Pad disc 140 mm long).
Ideal for hard surfaces or repolishing scratched surfaces.
Angle drive with automatic tool changing, for straight edges polishing.
Allow square openings, polishing all the way to the corner with no manual intervention. Can also be used for grooving or polishing curved edges.
45 TOOL LINEAR MAGAZINE ON 2 ROWS
45 spaces for tools Ø maxi 150 mm
Equipped with a retractable protection housing
Possibility to program up to 150 tools
Optional: 2 additional rows for a total of 90 spaces
Z vertical stroke = 800/1200 mm
Power 12/22 kW

The TC1200 is a genuine 5-axis numerically controlled cutting and shaping centre. It allows cuts to be made in all directions automatically without moving the slab.
Very innovative, the TC1200 allows you to carry out very simply and with very high precision all cuts in materials up to 425 mm thick.
Standard equipment:
Cross Laser Line Laser
Lubrication unit Remote control
Touch-screen 15″ console


Optional extras:
Fixed, mobile or tilting table Tool sensor
Camera
Software:
Included:

Express Jobs Powerful program including parametric shapes, very easy to use
Optional:

T’Shape 3D shaping software
T’Cut 2D cutting software
Vein Matching Software Software for 3D visualization of pieces with their veins
eT’CAM 2D shaping software designed for decoration
T’CAD/T’CAM 3D design and shaping software
Available versions:
Track lengths available :
*5880 mm
*8505 mm
*11130 mm
*13755 mm
*16 380 mm