Basalt Slab Cutting Machines in China

MAS-14 EDGE CUTTING Machine with Tools
DAP UKRAINE:7400$

5 axis stone CNC bridge cutting machine under promotion now
Just need 15,800 USD , price valid until 20th, July,2021
1. Stone edge cutting
2. Round , arc, oval and so on shape cutting .
3. Mitre 45 degree edge cutting .
WhatsApp: 008613361380416
www.beststonemachine.com

Infrared bridge cutting machine with 4-column adopts PLC control and automatic positioning techniques for various moves of the cutter frame & linear rolling guide driving,magnetic ruling,laser device setting.It is consists of high quality steel.The platform can be 360degree rotatable and automatically trun slate up.It can cut sizeable slabs with high precision and efficiency.
Technical parameters:
1•max.blade of diameter φ400-700mm
2•max.stroke for transverse 3600mm
3•max.stroke for longitudinal 3300mm
4.elevation stoke for main shaft of blade 430mm
5•max.titling degree for work-bench 87°
6•max.rotation degree for work-bench 360°
7.location degree for work-bench 0°- 45°- 90°
8•power of main motor 18.5kw
9•total power of machine 23.5kw
10•water consumption 2m3/h
11.water pressure >0.2 Mpa
12.overall size for machine 4800×5816×2350mm
13•total weight for machine 5800kg
This machine is composed of bridge stank, upper transmission unit,left and right moving mechanism, vertical arm, left and right side beam, block delivery trolley truck, and so on. The brief introduction to them as follows.The bridge stand is composed of bridge stand, sliding plates, spanning rack, fixing bush andhorizontal cutting, and so on. The cast bridge stand is supported by the rolling rail at the bottom end against right and left side beams. At its top, there is twin—V guides rail to act with sliding plate, guard is fitted over the guide rail to prevent dust intruding. The spanning rack is coupled with sliding plate, horizontal cutting tool is fitted at one side face of the spanning rack whose top is fitted with back bars reduction mechanism;gear;rank and bevel gear reducer;longitudinal moving motor. Vertical cutting tool is fitted at the bottom of bridge stand. When the machine cuts the blocks with vertical blade, the motor of vertical-cutting drives the blade to rotate through belt transmission and the slide plate moves longitudinally under the action of longitudinal moving motor through meshing between gear and rank. When the vertical cutting is completed and horizontal cutting begins, horizontal cutting blade carries on longitudinal lateral cutting which cuts off the plate and finishes the whole cutting operation. The height of horizontal blade could be adjusted by worm-wheel reduction box.The upper transmission part: This part consists of reducer motor, transmission shaft,connecting sleeve, bracket and bevel gear. When bridge stand elevates, the motion of motor for elevating is output from reducer motor through transmission shaft and bevel gear to lead screw which drives bridge stand to elevate.Left and right movement part: This part is composed of reducing gear, gear, spindle and splitwheel. When bridge stand moves, the motion of motor is transmitted to main gear which is engaged with the rack at the top of side beam and drives bridge frame to move to the right and the left. The amount of movement can be controlled by control panel.The vertical arms part: This part consists of four groups of vertical arms, two pieces at eachside and all are jointed with upper beam, left and right screw nut seat moves along the guide rails of vertical arm up and down, which makes bridge stand elevate.Left and right side beam part: This part is consist of left and right side beam, rack, slidingberth and screw nut seat. The left and right side beams are jointed with vertical arm by screw nut seat. At their top, there are rack and sliding berth assembly which is used to support bridge stand. The engagement space between rack and gear could be adjusted by reducer motor and bearing seat.Block delivery trolley truck part: It consists of reducing box, axle, chassis and track wheel,and so on. The truck is driven by independent motor. The chassis is made from profile steel and steel plate by means of welding. The motion of motor is reduced by reduction box and drives the wheel to rotate along guide rail, which carries out block conveying.

1. Stone edge cutting, Deskton, Sintered stone , porcelain tile cutting
2. Mitre 45 degree edge chamfer cutting.
3. Round, Arc, Oval and so on shape cutting
4. Sink hole cutting
5. Can read AutoCAD drawing for complex shape cutting
6. "L" shape, island Arc shape countertop slab cutting

This bridge cutting machine is used for cutting stone slab,which is controlled by microcomputer with touch-sensitive operation system. A fine adjustable inverter controls the cut and return. The bridge saw is equipped with a laser illumination system,which makes the disc adjustment easier.

Titan 3500 is the new generation multi-function processing machine which is associated to be designed and manufactured between OMC and research institute of famous college. With pattern operation and advanced control system and synchronous CNC control system, the machine can be easily operated
easily without knowing complicated CNC knowledge.
This machine can be used to realize some advanced functions like : cutting line, chamfering, drilling, profiling, 3D profiling, and edge profiling, which can be used to small processing factory and countertop shops.

1). Powerful 11 kw motor with adjustable speed, speed up to 6000rpm/min, humanized design.
2). Support cutting, milling, edge grinding, profling and laser fixed pointing drawing.
3). Full graphic operation with photo typesetting. What you see is what you will get. Support CAD import, dxf file, direct input, with simple operating system and strong functions.
4). With vacuum carries for moving the slab, tools and slab thickness measurement.
5). 15 inches color high-definition touch screen, servo motors, automatical chamfer between 0-90 degree, 360 degree rotating head, real-time monitoring of machining tracks, power off position retention, infrared laser, wireless handle, arc/circle cutting with saw blade.
6). With hydraulic tilting table→Easy to load and unload slab
7). High processing accuracy by using precise guide rail and rack.

This machine adopts Microcomputer system, easy to operated ;Integrated structure ,easy to install ;The frame of the machine body is processed and formed by CNC gantry milling center at one time ,using high-precision linear guide sliders, grinding -grade ball screws, and high-end servo systems .It greatly improves the stability ,processing accuracy and production efficiency of the equipment ,and reduces the failure rate .It is suitable for all kinds of large-scale plate processing with high precision requirement and high value.