Brazil
If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:$4000-9000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Joint 45° is a machine for fast and precise cutting of the 45°angle of natural and artifcial stone. It helps produce high-quality joint pieces normally used to manufacture kitchen tops and table bases.The mitre cut by conventional bridge saws is inaccurate due to: Variations in the thickness throughout the slab. Varying height of the table surface. Face-up cutting of the material. Movement of the slab during 45 degree cutting because it is not fxed. The material being not completely straight.The mitre saw Joint 45° eliminates these problems because the material is loaded upside down on the rubber-topped table and clamped down by pneumatic pistons which also straighten the material and ensure that the polished surface is always straight. In addition, the smaller blade has less chipping of the material during cutting.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
FOB Price:$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Bestlink factory 30HP 60HP Thin Stone Saw Cutting Machine for Basalt Stone
VS series thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistency, efficiency, and reliability. There are two model:30HP&60HP.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:€3250-3250
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Construction site saw wet and dry cutting CTS 800
€ 3,250.00 *
excl. VAT plus shipping costs
Available again soon
Product number: O09.190
description
Product information "Construction site saw wet and dry cutting CTS 800"
Perfect machine for wet and dry cutting
Efficient dust extraction in a closed system with a cyclone filter as a pre-separator
Cutting table with ball-bearing rollers
Delivery including universal cutting disc 350 mm Ø, noise-dampened
The vacuum cleaner is not included in the scope of delivery
Cutting depth 110 mm
Delivery including universal full-cut cutting disc Ø 350 mm, noise-dampened bore 25.4 mm and base
Speed: 2,800 rpm
Weight: 109 kg
Power: 2,200 W.
Cutting length: 600 mm
Voltage: 230 V.
J. Konig GmbH & Co
Germany
J. Konig GmbH & Co
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
The machine, which is mounted on a steel chassis, has a closed and oil reservoir rail system, and the speed control and the dimensions given with the desired cut precision cuts.
Saw speed and car speed tab is the target of the desired cut, while the target is to exit at high speed
Fully Steel is Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slide is Supported with Water-Free Protective Guards.
Our machine works with the help of cutting 90 degrees and 45 degrees reducers.
Flat Water Motor Has Been Used On Our Machine Head Cutting Up Down Inner Shell System Using Special Materials To Provide Precise Cutting In Bridge Cutting Machines, It Serves As A Sliding Coupling.
Our Wagon Side Cutting Machine is Designed as Both Cutting Sizing and Side Sizing.
Our machine Head rotation folk movement (C axis) is Manual
Our machine is 45 degree movement manual with reducer
Our machine is Slide Movement (Y axis) AUTOMATIC / Manual
Our machine is WAGON Movement (X axis) AUTOMATIC / Manual
It can be used both manually and automatically.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
The Machine Has Been Made Completely Steel NPL-U
With the help of a reducer, it provides speed controlled automatic cutting.
Information on the materials used in the machine
Electric Motors: Reducers
* Motorized Gearbox for Slip Ways (Transmission 0.75 gamak motor transmission)
* Piston Sliding Motorized gearbox (Transmission 0.75 gamma motor gearbox)
* Motorized transmission for transport wagon movements (Transmission between 0.75 motorized transmission)
* Gear box for 45 degree cutting movements (Flywheel / Gear Box)
* Straight waterproof motor for marble and granite cutting works (9.3 kW 1500/3000 double rounded peasant motor)
Movement / Walking Systems:
* 0.5 '' steel gear mechanism for transport wagon movement
* Head cutting motion system with the help of trapeze.
* Cable transport systems, sliding paths are applied on the motion functionality.
* Transport wagon Closed sliding track walking equipment is provided with transmission crank.
Steel Construction of the Machine
* Side cutting machine is steel monoblock and massive.
* The chassis is made of 320 NPLU material.
* The transport wagon is designed from 80 X 20 material.
* The carrier wagon also has a steel chassis and is processed in 6 axes on CNC machines.
* The rear tower is made of 10 mm thick solid sheet metal and designed to reduce the vibration of the machine.
* Top slide ways are processed from 10 mm solid sheet metal to 8 mm between the grid in CNC machines.
* Wagon parts, wagon wheels are made of chiffon gg50 alloy to resist wear.
* Piston System is solid steel thick pipe.
* All head cutting group parts are cleaned in the milling machine.
* Head group parts are covered with anti-corrosion and rusty parts.
…… .. …… .. WORKING PROCEDURE OF THE MACHINE ………………
Periodic maintenance of the machine should be done daily, weekly and annually.
Lubrication of critical parts of the machine should be done regularly. (such as hubs of pressure impellers, slide ways, engine lubrication pump, etc.)
In case of problems caused by poor maintenance or lack of maintenance, the buyer company covers the repair and repair costs.
Our company provides technical support as soon as possible depending on the conditions.
In case of any malfunction or incorrect operation depending on the user, any intervention will be performed after an expert inspection on the machine.
It is under warranty for 1 year.
It is the buyers' duty to supply on-machine cutting saws.
The machine's consumables are not covered by the warranty. (such as cut-off saws)
Accommodation and transportation costs of the assembly team belong to the buyer company.
… ..…. ACTIONS THAT MUST BE TAKEN BY YOUR PARTY DURING THE INSTALLATION PHASE… ...
An electrician is required for the installation of the cable connections to provide 13 kW of electricity near the fuse board of the machine.
To provide plumbing next to the machine.
Cutting saws must be provided on the installation.
Required space for machine installation: 7000 mm X 3000 mm X 2500 mm (height)
One can of machine oil (30 size), one can of Grease.
Marble Side Cutting ...
Som-maK
Turkey
Som-maK Mermer Granit Makina Ltd Sti
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:$4300-4500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Manual edge cutting machine adopts the joint structure, and the main machine can be 45 ° Rotation, electric lifting, trolley hand drive, compact structure, beautiful appearance, stable performance, high machining precision.
KAIDA
China
Fujian Province Kaida Stone Machinery Co.,Ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
$3200-6500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
This machine is for cutting slab. Equipped with guide rail of oil-impregnation sealed type and main shaft of oil lubrication type. The compact structure makes easier cutting. Function of chamfering slab is optional.
WANLONG
China
FuJian WanLong Diamond Tools CO,.LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$9200-9500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
This machine is to split the slab into thin tiles, widely used for producing super-thin marble composited tiles. The worktable can feed automatically and its speed is adjustable and flexible.
WANLONG
China
FuJian WanLong Diamond Tools CO,.LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$4500-5000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine uses joined structure, the main head can rotate 45 degree, and be electrically moving up and sown, the whole machine has compact structure, stable functions and high cutting precision.
KAIDA
China
Fujian Province Kaida Stone Machinery Co.,Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The mighty stone saw (30/60 horsepower) model is compact, portable, and lighter - making the task of hauling much easier. This model comes with a smaller and faster 30 in. Blade for quicker cutting of your everyday stones. Effectively changing the stone cutting industry,
this mighty stone saw has been designed to be safe, sturdy and simply low maintenance. Every aspect-from components to assembly-was designed to fit all the below criteria and do it at a reasonable price.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone
Machinery Function Features:
2021 Bestlink Factory Price Thin veneer saw machine for cutting corner stone
The mighty stone saw (30/60 horsepower) model is compact, portable, and lighter - making the task of hauling much easier. This model comes with a smaller and faster 30 in. Blade for quicker cutting of your everyday stones. Effectively changing the stone cutting industry,
this mighty stone saw has been designed to be safe, sturdy and simply low maintenance. Every aspect-from components to assembly-was designed to fit all the below criteria and do it at a reasonable price.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
manual Hand-operated edge cutter, hand-operated stone saw- Single Disc Cutting Machine -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Bestlink Right angle （section） machine
The machine is a monolithic structure with compact structure and convenient installation and transportation.
The main control components are all international brand components, and the cutting main motor and cutting conveyor belt are all stepless speed regulation.
The working mode of the machine adopts the continuous cutting mode of the pipeline , which is mainly usedfor cutting the plane of irregular elliptical stones such as goose warm stone.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Bestlink Cultured Stone Veneer saw cutting machine
The machine is a monolithic structure with compact structure and convenient installation and transportation.
The main control components are all international brand components, and the cutting main motor and cutting conveyor belt are all stepless speed regulation.
The working mode of the machine adopts the continuous cutting mode of the pipeline , which is mainly usedfor cutting the plane of irregular elliptical stones such as goose warm stone.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
$6100-6600
Warranty: 12 Months
Usage: Granite
Machinery Function Features:
This machine is for cutting slab, Equipped with guide rail of oil-impregnation sealed type and main shaft of oil lubrication type. The compact structure makes easier cutting. Function of chamfering slab is optional.
Wanlong Group
China
FuJian WanLong Diamond Tools CO,.LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Bestlink Mighty Stone Thin Veneer Saw Cutting Machine
VS series thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistency, efficiency, and reliability. There are two model:30HP&60HP.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
€2795-2795
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Construction site saw MANTA INOX 85
€ 2,795.00 *
excl. VAT plus shipping costs
Available again soon
Product number: O16.100
description
Product information "construction site saw MANTA INOX 85"
for cutting tiles, natural stone, cast stone slabs and other building materials
latest generation of mobile stone saw with powerful motor, stainless steel tub, mini battery laser and stop
very robust and durable construction
full-surface support table for thin workpieces
precise cuts thanks to the 40 mm diameter precision round guide with recirculating ball bearings
more stability thanks to machine feet with cross bracing
Easily transportable thanks to the folding machine feet and transport wheels (with a cutting length of 1500mm, rigid feet)
Bore 25.4 mm, power 2.6 kW with motor brake / 230 V | Galvanized swivel element, infinitely adjustable 45-90 degrees | Height adjustment via M24 threaded rod with large handwheel
Dimensions (L / W / H): 1,400 x 660 x 770 mm
Speed: 2,800 rpm
Weight: 96 kg
Cutting length: 850 mm
Cutting depth: 60/80/110 mm
Cutting disc ø: 250/300/350 mm
J. Konig GmbH & Co
Germany
J. Konig GmbH & Co
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Radial sawing machine for marble, granite and stone.
Robust, accurate, versatile and economical. Extremely accurate with head sliding bymeans of linear ball bearings on two chrome-plated and ground bars.
It is equipped with a submersed pump inside the base for disc cooling water regeneration. Vertical motion of the head by means of handwheel for stable and fast control.
Inclinable head for 45° cuts.
ACCESSORIES:
1 Stop
Transport handles
Set of wrenches
Baicchi Abrasivi
Italy
Baicchi Abrasivi Innovation S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
The two-headed milling machines are related to the conveyor table. The large size and thickness of marble or granite fulfills the function of scaling from the widest dimension. Trimming is done by forwarding. For serial production plants, machine production is made in desired number of discs and length. -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite
Machinery Function Features:
The machine, mounted on a steel frame, has a closed and oil reservoir rail system, with Linear Slide Kremier Transfer. The desired cut with the measurements given with the speed control makes precise cutting.
(AUTOMATIC) System Is Switched To Automatic Mode, The Barrel Moves Down Manually, The Wagon Starts To Cut The Stone, The Wagon Stops The Wagon Waits For The Head.
(SEMI-AUTOMATIC) Sizing values are entered on the screen. The system is taken to the sizing mode, the dimensions of the stone are entered, the hive moves automatically downward, the wagon starts to cut the stone, the hive is raised automatically when the wagon comes out of the ship, the wagon comes to the beginning. BiteR when the menstruation is complete
(XY FULLY AUTOMATIC) It is taken to the screen in full automatic mode, XY values are entered. The length of the parts to be cut is entered, the number of the parts, the dimensions are written, the hive moves automatically downwards, the car moves automatically, the stone starts to cut, the barrel automatically rises up when the wagon comes off, the wagon comes to the head tower counts the skid gauge and The Hive Retracts The Cutting (X AXIS When Cutting Is Finished, The System Turns Its Head Automatically, It Starts To Diminish The (Y) Minus In This Way, It Continues Up To The Plate Bit.
Fully Steel is Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slide System is Purified from Water, LİNER RAIL, Protective Bellows System is Integrated.
Our Machine Cutting 90 degrees and 45 degrees Reducer Works Automatically.
Flat Water Motor Has Been Used On Our Machine Head Cutting Up Down Inner Sleeve System Compare In Bridge Cutting Machines By Using Special Materials To Provide Precise Cutting, It Serves As A Sliding Coupling.
Our Wagon Side Cutting Machine is Designed as Both Cutting Sizing and Side Sizing, XY Sizing with full size system.
Our machine Head rotation circular movement (C axis) is AUTOMATIC
Our machine is AUTOMATIC with 45 Degree movement reducer.
Our machine is Slide Movement (Y axis) AUTOMATIC / Manual
Our machine is WAGON Movement (X axis) AUTOMATIC / Manual
Both Manual, Automatic, Semi-Automatic. Fully Automatic, Usable.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
With the help of a reducer, it provides speed controlled automatic cutting.
Som-maK
Turkey
Som-maK Mermer Granit Makina Ltd Sti
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
VS series thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistency, efficiency, and reliability. There are two model:30HP&60HP.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12500-16000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Bestlink Factory Thin veneer saw stone wall veneer saw corner cutting machine
The mighty stone saw (30 horse and 60 horse power) model is compact, portable, and lighter - making the task of hauling much easier. This model comes with a smaller and faster 30 in. Blade for quicker cutting of your everyday stones. Effectively changing the stone cutting industry, this mighty stone saw has been designed to be safe, sturdy and simply low maintenance. Every aspect-from components to assembly-was designed to fit all the below criteria and do it at a reasonable price. Reliable
powerful
fast
accurate
safe
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$4500-7000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Cross Cutter-CR65 is for cutting strips of marble and granite. The machine is made in compact. It is easy for installation and future moving. The stone material can be loaded quickly and easily. It works manually and automatically. The operation is easy. The cutting speed is controlled by an inverter. Optional 45° rotation table.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12000-14400
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our patented veneer saws make cutting thinstone veneer flats and 90-degree corners quick, simple, and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16” high and 2.5” thick.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$795-1550
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
This stone cutting machine is widely used in construction, decoration and other industries, especially for construction engineering, stone processing, building materials construction site, for stone, marble, firebrick, trail brick, blind road brick professional cutting.
Product Features:
300/350mm diamond saw blades can be used according to customer requirements.
The nose can be rotated at an Angle of 45 degrees to ensure that customers are chamfered.
Customers can choose 220V or 380V models according to their needs, and equipped with 220V or 380V models waterproof switch.
Automatic water-bearing operation in cutting construction.
Widely used in construction, decoration and other industries, especially for construction engineering, stone processing, building materials construction site.
This stone cutting machine for stone, marble, firebrick, trail brick, blind road brick to provide professional cutting.
ZT
China
Zest Machine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The Triton is circular sawing machines which are suitable for sawing plates and slabs of marble and granite or comparable materials.
Saw movement manual
MAVECO Stone Machinery BV
Netherlands
MAVECO Stone Machinery BV
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Crosscut saw KS 40
The good cut
A good crosscut saw belongs in every stone processing plant. We offer a wide range of crosscut saws, from the simple crosscut saw to the swiveling machine for miter and angle cuts.
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Marble bench saw ITC AV/AA with toothed belt-drive transmission system. Perfect for both building sites and for small-medium marble-works. Ideal for cutting brickworks, natural stones and stone-like materials, bricks, marbles, granites and Grès porcelain stone-wares. A solid and precise wet saw, available with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine) – model “AV” – or motorized (with inverter for regulating the speed of advancement) – model “AA”. Unlike the basic versions (ITC – ITC AL – ITC ST) the operator remains stationary, without having to move with the head during cutting.
The head runs on chrome-plated guides straightened by means of linear recirculating bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø300 Ø350 Ø400 and Ø450 mm. Available in single-phase or three-phase version.
Sawing-machine equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap.
Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: raised structure for using blade of Ø450 o Ø500 mm, multilayer marine plywood (phenolic) work surface, diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, motor for adjusting depth of cut (on versions AA and AA-T), precision laser, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$12000-12500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The veneer saw cuts thin stone veneer fats and 90 degrees corners. It cuts stone with irregular shapes and variable dimensions. While maintaining its natural shape, the cut stone presents an even surface, making it easy to place on any surface.It uses vertical blades and an automatical controlled conveyor to accurately cut fat and corner pieces to uniform sizes.Cut types: Flats + Corners.Up to 380mm high and 60mm thick.Material: Sandstone. Brick. Limestone. Other stone. Operating the is easy. Simply adjust the vertical blade position, then place the stone on the durable belt conveyor. Automatically adjust the belt speed with the touchscreen control.The main motor is equipped with an inverter, which can adjust the speed and save energy ac-cording to the cutting status. Manual Height Adjustments. Easy blade changes.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
STAKLES EU
Lithuania
STAKLES EU
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
- Designed for precision cutting and polishing of all type natural and artificial stone.
- Blade is adjustable for different angle cut at 30, 45, 60 or 90 degrees.
- Rotary overhead provides multi-function such as shaping, polishing, drilling and arcing.
- Superior measurement system for icrease accuracy.
- Two roler tables to create more size and shape options.
- Water cooling system prevents damage to the blade and the materials.
- Overloaded power shuts down automatically.
Abaco Machines
Viet Nam
Abaco Machines
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Cutter machine with rotating head.
Movement of table auto or manual (INVERTER).
The machine has the possibility to fit tools and drills for formations.Motor power 15HP – 25HP.
Cutting disk 35cm – 60cm.Movement of disk up-down, in-out and rotation with electro-reducers 0.5HP each.
Table dimensions 1x2.5m.
P. Elenis Marble Machines
Greece
P. Elenis Marble Machines
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
This machine is very precise and it is manual. The table moves manual, and the disk moves up and down, toward and backward manual. It is suitable for cutting slabs. With a stable working, flexible and easy handle, by adjusting the disc which can rotate to a certain degree; it can process those slabs with required angles. The table is hydraulic. -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
Bridge saw machine, ideal for cutting construction materials and natural stones.
GHELFI SRL
Italy
GHELFI SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone, Travertine
KONMAK MARBLE MACHINERY
Turkey
KONMAK MARBLE MACHINERY
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
MAIN MOTOR : 10 HP (Hindustan, Crompton, Siemans)
BEAM LENGTH : 12 FEET
L.T. MOTOR : 2 HP
C.T. MOTOR : 2 HP
UP DOWN MOTOR : 2 HP
CONTROL PANEL : PANEL TO MACHINE
LONG TRAVELLING : 20 FEET
VERTICAL SLIDES : 6”
REVOLVING TROLLEY : 1 NOS.
Bhagwati Machine Tools
India
Bhagwati Machine Tools
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$1500-2500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Mitre Saw Tile Cutting Machine - C350 Easy to use. Easy transportation and installation. For cutting tile and ceramic.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AVS with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine). The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting slabs of natural stone, marble, granite and Grès porcelain stoneware, but also for bricks and brickwork. Toothed belt transmission means that the operator can remain stationary without having to move with the cutting head.
Manual inclination of the bridge from 90° to 0° by means of a simple lever or reduction gear – for those who wish greater precision during the operation of setting the degrees. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, precision laser, reducer for degrees regulating, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Travertine
Machinery Function Features:
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 650 mm
Çalışma Kalınlığı / Working Thickness 8/60 mm
Ebatlı Kesim Uzunluğu / Cut to Size Length 1750 mm
Testere Motoru / Saw Engine 7,5 kw
Testere Çapı / Saw Diameter 350 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 0,75 kw
Toplam Güç Tüketimi / Total Power Consumption 8,25 kw
Ebatlar / Dimensions 3750 x160 x1200 mm
Ağırlık / Weight 1300 kg
GÖLER MAKİNA
Turkey
Goler Makine Rulman San Tic. Ltd. Sti.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$29999-89999
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Compared with ESAB,Miller, OTC,Lincoln Electric, our features：TOPtek Laser is an innovative high-tech company focusing on handheld laser welding solutions. Adhering to the deep professional ability, numerical control system, high-speed transmission system and other core technologies, we are committed to providing high-quality welding solutions to customers in various industries around the world.
After decades of development, the company has become a modern high-tech enterprise integrating research and development, sales, production and service.
TOPTEK
China
Shandong TOPTEK Co.,ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
It cuts side only and has 9-13 kW motor. It is used for cutting rough edges quickly. Linear slides are used for upper body movements.
It cuts straight on Y axis… No 45 ° cutting, No head rotation to another directions,
Cutting ability is net 800 mm on Y axis,
Cutting head group moves on the linear slides by button / joystick. Saw Forward – Saw Backward,
Marble slabs can be easily load on the plastic rolls for squaring,
Cutting speed is adjustable
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$8000-12000
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Quartzite
Machinery Function Features:
the Automatic CNC Continuous Tiles Cutting Machine is the new machine that improve from full automatic continuous cutting machine to solve the problem that high worker cost, Disac quaintance handle, Slow speed, Process size small and big opposite angles error. Use this machine,We need only one worker press the number in the panel to make the machine automatic adjust size and cut with low error and low cost.
China
FOSHAN CHUANGKINGDA MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Este - Cross Cutting Machine, Strip Cutting, Edge Trimming Machine
Tuto Mermer Dis Tic Ltd Sti.
Contact Supplier
Have a Question? Ask our expert
Ask now
