Granite Finishing, Profiling Machines in Turkey

Our surface polishing marble granite chamfering machine provides series and standard production.
Our fully automatic polishing machine is easy to use and maintain, and it chamfers from the bottom.
Our machine is controlled by front panel and all heads are working independently of each other.
The polishing heads automatically work and come out just after the entrance of the stone till finishing the relevant area, then automatically turns off and goes back.
Heads can be disabled according to the process.
The polished part of the marble must be placed on the production belt.
Conveyor belt movement is electronic speed controlled and width is 450mm...
Our machine is produced as 6+2, 8+2, 10+2, 12+2, 14+2 standard according to the sort of natural stone.
Our 12+2 machine has 1 caliber, 5 bottom chamfer, 6 side chamfer, 1 deburring and 1 drip saw.
The machine can process minimum 70/80 mm and up to 1500 mm with a bottom supported compasses mechanism.
The engine section of the machine is completely protected from water by internal and external protective parts.
The protective panels are opened and closed with the help of shock absorbers for lubrication channels maintenance and abrasive replacement.
Felt is used to be resistant of heat and abrasion to protect the head bearings behind the abrasive.
If the customer wants our machine can be integrated into the herringbone diamond.

Mono Head And Double Head Multi Cutting Machine for mosaic

3 Axis CNC Waterjet can cut all kinds of materials existing in the nature up to 200 mm thickness with power generated by mixing pressurized water and abrasive sand. All materials cutting can be made with the same nozzle. Not only for thick but also for thin materials, it can realize 90 degrees corner, narrow angular and small radius precise cuttings.

the thrilling mosaic cutting machine of the age hard to find even on the second hand market
order now start counting your golden münze
precise cutting
1x1 cm 1,5x1,5 cm 2x2cm 2,3x2,3cm all american sizes available
custom design assebly molds
cutting molds with availibity of cutting triangle ; octagon and many other custom shapes

3D 5 Axis CNC Waterjet is designed by our engineers to make highly precise 0-120 degrees angular cuttings.Thanks to rigid structure, not being affected by deflector force of high pressure coil, can realize 3D cuttings in 0.02 mm accuracy.5 axis head can rotate +/- 360 degrees.

Description
ÖZELLİKLER EKO 912 SERİSİ
NET ÇALIŞMA ALANI 1200X800X200 MM
ŞASE TİPİ KARE PROFİL DEMİR ŞASE 10MM
SPİNDLE MOTOR HERTS/AREL
SPİNDLE MOTOR GÜCÜ 2.2/5.5 KW.
SPİNDLE DEVRİ 24000/18000
HIZ KONTROL 2.2/5 KW.
HAREKET MOTORLARI HYBRİD SERVO / STEP
X/Y/C/B EKSENİ MEKANİK LİNEER RAY
Z EKSENİ MEKANİK AKSAM LİNEER RAY, VİDALİ MİL
CNC KONTROL SİSTEMİ DSP PANEL / MACH3
TABLA TİPİ GALVANİZ PASLANMAZ TABLA
PROGRAM HASSASİYETİ 0,01 MM
SOĞUTMA SİSTEMİ OTOMATİK SU SOĞUTMA
PANO PROFESYONEL ENDÜSTRİYEL TİP PANO
TAKIM TUTMA TİPİ ER25/ER20
ÇALIŞMA KOD SİSTEMİ STANDART ISO G KODU
EMNİYET SİSTEMİ ELEKTRONİK SENSÖR
ELEKTRİK KESİNTİSİNDE KALDIĞI YERDEN DEVAM EDER
ELEKTRİK DONANIMI CE NORMLARINDA
SIKIŞTIRMA SİSTEMİ PİNOMATİK

Number of Calibrating Heads : 2/3/4/6 pcs
Number of Polishing Heads : 6/8/10/12/14/16 pcs
Number of Fixed Polishing Heads : 1 pc
Calibrating Head Plate Diameter : 700 mm
Polishing Head Plate Diameter : 500 mm
Fixed Polishing Head Plate Diameter : 700 mm
Calibrating Head Motor Power : 22 kW
Polishing Head Motor Power : 7,5 kW
Fixed Polishing Head Motor Power : 11 kW
Working Width : 300-650 mm
Working Thickness : 8-80 mm
Machine Width : 1800 mm
Machine Height : 2400 mm

Number of Calibrating Heads : 2/3/4/6 pcs
Number of Polishing Heads : 6/8/10/12/14/16 pcs pc
Calibrating Head Plate Diameter : 1100 mm
Polishing Head Plate Diameter : 520 mm
Calibrating Head Motor Power : 30 kW
Polishing Head Motor Power : 7,5 kW
Working Width : 300-1000 mm
Working Thickness : 8-80 mm
Machine Width : 2100 mm
Machine Height : 2400 mm

GDM 2160 is used for exterior surface granite or marble tiling by drilling anchor holes in pneumatic system.
It is the machine that opens the pin holes of mechanical facade systems.
Water Pump
By the help of recycling centrifugal system pulverizes from the center of diamond drills and allows fast and easy drilling and prolongs the diamond drill life.
Air Compressor
Minimum 50 lt 8 bar compressor is required for healthy operation of the machine
Diamond Bits
The GDM 2160 uses wet drill bits with a rear connection diameter of 10 mm.
Standard drill diameters 6-8-10 and 12 mm sintered diamond inserts are produced.
These inserts cool the diamond by continuous water flow during drilling

For detailed information about the product, you can download the relevant documents.

CNC MACHINING CENTER
GENERAL DESCRIPTION:
NC4-320 4 axes is a multifunctional working centre to process marble, granite and compound stone designed also for complex processing in short time and high quality. NC4-320 has been specially designed to ensure higher production capacity as well as the largest flexibility thanks to the very high working and displacement speed and the wide gamut of possible geometries,which allow any kind of processing ( shaping, profiling, milling, chamfering, drilling...)on marble, granite and compound stone slabs without the intervention of the operator, following a pre-set program. The machine features a mobile bridge structure, engineered using the state-of-the-art techniques of computer-assisted design, which forms a sole assembly with the uprights fixed to the based onto which the pieceholding table is applied.
AXES MOVEMENT:
The axes move by re-circulating ball screw at 60 m/min with accelerations which permit to reach the maximum speed in very short time. An automatic device to lubricate the guides and the screws grants high reliability over the time of every moving part.
The rapid displacements of the bridge along the shoulders are performed at a speed of 40 meters per minute; this make it possible to have faster work cycles, as all idle times for non-operative movements are absolutely negligible.
THE SPINDLE UNIT:
The tempered and rectified steel guides for the displacement of the spindle holding saddle (x axis) are machined onto the normalized, electrowelded steel bridge, suitably dimensioned and ribbed. The whole sliding system is protected in order to avoid any possible contamination between the processing water and lubricating oil. The spindle holding saddle moving on recirculating roller slides.
In order to obtain rapid displacement up to 40 meters per minute, which accelerates the work cycles, the movement of the spindle-holding saddle is provided by a fixed high precision rectified screw and a mobile ball bearing preharced lead nut linked directly to a digital SIMENS servo motor.
The electro-spindle adopted for this work centre is manufactured by the most important european producer of these components; it is a powerfull unit (12kw) and can attain very high rotationspeed (max 11.000 rpm) in order to use milling tools with reduced diameters and therefore, providing extremely pricise processing. The stator and the rotor are housed within the casing; the whole assembly is cooled and stabilized by means of a thermal sensor to increase its reliability. The tool cooling water and the cone cleaning air pass through the spindle at a flow rate of 60lt/min. Spindle vertical travel of same 400 mm which allows to also rough-sahpe tick billets.
CONTROL UNIT:
The NC4-320 is equipped with a latest technology continuous numerical control unit (CNC) SIMENS sinumeric of the latest generation, with digital control on PC architecture.
STRUCTURE:
The support structure of the NC4-320 is composed of a rugged closed-type structure fabricated from a single pieces of normalized welded steel, so as to quaranty the maximum rigidity, thereby providing extremely pricise processing
The bridge moves along the shoulders of the main structure, onto which the tempered and rectified steel guides are machined.
The bridge movement along the shoulders is by a system of two recirculating ball-bearing screws with precharged lead nuts, each one acting on one side of the bridge.
This solution allows to have perfect control and absolute precision oof movement and positioning. Traction is garantied by two digital servo motors, each one acting on one screw; the perfect synchronism of the two screw is constantly driven by SIMENS numerical control installed on the machine.( Gantry drive system )
The NC4-320 numerical work centre has a mobile bridge along the Y axes; this solution makes the work area completely open and accessible, which facilitates loading and unloading of work-pieces even when lifting equipment is required.
Vacuum circuit with frontal control, easily accessible to the operator.
THE WORK TABLE
The machine’s base is made up of an extremely rigid structure upon which is placed an aluminium worktable rectified to grand maximum flatness of the work area. Aluminium work table provided with grooves for mechanical fastening of vacuum pads, to ensure that, the work pieces are tightly locked in place even during heavy grinding operations 22 position line tool store positioned on the two internal sides of the machine.
THE FOURTH “C” AXES:
Among the range of accessories, it is also available a unit that allows to use tools with horizontal axes.
This unit is fixed to the spindle by means of ISO 40 coupling,as any other tool; it can continuously rotate 360 around the , “C” vertical axes, which is numerically controlled and can be locked in any position to perform retilinear cuts in all directions.
It is a continuous rotating fourth axes “C” which makes it possible to use cutting units with vertical disc to perform rectilinear cuts, or convex disc for corvilinear cuts, or 45 adjustable disc to perform inclined cut
STANDARD SUPPLY
Manuel for use and maintanance.
20 pcs. BT 40 tool stainless steel holder cones ( ½ gas )
20 pcs. Adapter for wheel cutters
20 pcs. Pullstad bolds.
4 pcs. Ø160 mm suction cups.
4 pcs. Ø 100 mm suction cups.
4 pcs. Ø 80 mm suction cups.
6 pcs. Retractable positioning reference supports.
2 pcs. Pneumatic vice.
2 pcs. Retractable suction cups Ø 100 mm.
Tool box.
Spindle motor chiller
Vacuum pump
Water filtration device.
Air filtration devices for 5 microns
Electric box air-conditioning.
Electronic Siemens handwheel.
2 pcs. Water pumps.

Alligator ® Profile Machine
Alligator ®, profile machine, 7.5x7.5, 10x10, 15x15, 20x20, 30.5x30.5 cm width of natural and artificial stone types shaping with chip removal apparatus.
Alligator ® is manufactured in adhering to all the vital standards in other Toksel brand products. Energy smart motors, first quality bearing and machine elements, central fluid lubrication system, rigid and resistant structure, stainless material density, watertight board and high IP sealing standards, first class electrical-electronic materials, touch screen, extra cooling fans, motor and machining spindle special system and more…
Specialist Equip(Ment), Futuristic Surfaces
With 4,5,6 head solutions, the Alligator ® perfectly processes the waveform surfaces you dream of. Increased head counts allow for high quality surfaces with rapid production. As with different machines, Alligator ® also offers may features such as automatic lubrication, intensive stainless material handling, remote access and intervention, reporting, remote monitoring, warning and alarm.
Alligator ® materials are certified as well as are subject to input quality processes by the Toksel quality unit. Raw materials processed in the industry’s number of processing machines are colored on the state of the art surface covering line. Alligator ®, undergoing mechanical processes and tests at the installation site located within a 12,000 square meter facility, meets its users with the latest quality controls.

OZKKM 5 Axis / HYDRA Waterjet Machine

Multi Purpose Workshop type 4 axis Machine - Cutting, Profiling

EM13 - The Profiling Machine
• Belt Width: 500 mm
• Number Of Heads *Optional: 4
• Working Thickness: 10 – 100 mm
• Head Motor Power: 7,5 kW
• Belt Motor Power: 0,75 kW
• Total Electric Power: 31 kW
• Belt Speed: 0 – 4,9 m / min
• Diameter Of Socket: 240 – 300 mm
• Water Consumption: 120 Lt / min
• Machine Dimensions ( W / L / H ): 1500 / 4000 / 1800 mm
https://ekizoglumakina.com/en/product/profilling-machine-em13

CNC MACHINING CENTER
GENERAL DESCRIPTION:
NC4-320 4 axes is a multifunctional working centre to process marble, granite and compound stone designed also for complex processing in short time and high quality. NC4-320 has been specially designed to ensure higher production capacity as well as the largest flexibility thanks to the very high working and displacement speed and the wide gamut of possible geometries,which allow any kind of processing ( shaping, profiling, milling, chamfering, drilling...)on marble, granite and compound stone slabs without the intervention of the operator, following a pre-set program. The machine features a mobile bridge structure, engineered using the state-of-the-art techniques of computer-assisted design, which forms a sole assembly with the uprights fixed to the based onto which the pieceholding table is applied.
AXES MOVEMENT:
The axes move by re-circulating ball screw at 60 m/min with accelerations which permit to reach the maximum speed in very short time. An automatic device to lubricate the guides and the screws grants high reliability over the time of every moving part.
The rapid displacements of the bridge along the shoulders are performed at a speed of 40 meters per minute; this make it possible to have faster work cycles, as all idle times for non-operative movements are absolutely negligible.
THE SPINDLE UNIT:
The tempered and rectified steel guides for the displacement of the spindle holding saddle (x axis) are machined onto the normalized, electrowelded steel bridge, suitably dimensioned and ribbed. The whole sliding system is protected in order to avoid any possible contamination between the processing water and lubricating oil. The spindle holding saddle moving on recirculating roller slides.
In order to obtain rapid displacement up to 40 meters per minute, which accelerates the work cycles, the movement of the spindle-holding saddle is provided by a fixed high precision rectified screw and a mobile ball bearing preharced lead nut linked directly to a digital SIMENS servo motor.
The electro-spindle adopted for this work centre is manufactured by the most important european producer of these components; it is a powerfull unit (12kw) and can attain very high rotationspeed (max 11.000 rpm) in order to use milling tools with reduced diameters and therefore, providing extremely pricise processing. The stator and the rotor are housed within the casing; the whole assembly is cooled and stabilized by means of a thermal sensor to increase its reliability. The tool cooling water and the cone cleaning air pass through the spindle at a flow rate of 60lt/min. Spindle vertical travel of same 400 mm which allows to also rough-sahpe tick billets.
CONTROL UNIT:
The NC4-320 is equipped with a latest technology continuous numerical control unit (CNC) SIMENS sinumeric of the latest generation, with digital control on PC architecture.
STRUCTURE:
The support structure of the NC4-320 is composed of a rugged closed-type structure fabricated from a single pieces of normalized welded steel, so as to quaranty the maximum rigidity, thereby providing extremely pricise processing
The bridge moves along the shoulders of the main structure, onto which the tempered and rectified steel guides are machined.
The bridge movement along the shoulders is by a system of two recirculating ball-bearing screws with precharged lead nuts, each one acting on one side of the bridge.
This solution allows to have perfect control and absolute precision oof movement and positioning. Traction is garantied by two digital servo motors, each one acting on one screw; the perfect synchronism of the two screw is constantly driven by SIMENS numerical control installed on the machine.( Gantry drive system )
The NC4-320 numerical work centre has a mobile bridge along the Y axes; this solution makes the work area completely open and accessible, which facilitates loading and unloading of work-pieces even when lifting equipment is required.
Vacuum circuit with frontal control, easily accessible to the operator.
THE WORK TABLE
The machine’s base is made up of an extremely rigid structure upon which is placed an aluminium worktable rectified to grand maximum flatness of the work area. Aluminium work table provided with grooves for mechanical fastening of vacuum pads, to ensure that, the work pieces are tightly locked in place even during heavy grinding operations 22 position line tool store positioned on the two internal sides of the machine.
THE FOURTH “C” AXES:
Among the range of accessories, it is also available a unit that allows to use tools with horizontal axes.
This unit is fixed to the spindle by means of ISO 40 coupling,as any other tool; it can continuously rotate 360 around the , “C” vertical axes, which is numerically controlled and can be locked in any position to perform retilinear cuts in all directions.
It is a continuous rotating fourth axes “C” which makes it possible to use cutting units with vertical disc to perform rectilinear cuts, or convex disc for corvilinear cuts, or 45 adjustable disc to perform inclined cut
STANDARD SUPPLY
Manuel for use and maintanance.
20 pcs. BT 40 tool stainless steel holder cones ( ½ gas )
20 pcs. Adapter for wheel cutters
20 pcs. Pullstad bolds.
4 pcs. Ø160 mm suction cups.
4 pcs. Ø 100 mm suction cups.
4 pcs. Ø 80 mm suction cups.
6 pcs. Retractable positioning reference supports.
2 pcs. Pneumatic vice.
2 pcs. Retractable suction cups Ø 100 mm.
Tool box.
Spindle motor chiller
Vacuum pump
Water filtration device.
Air filtration devices for 5 microns
Electric box air-conditioning.
Electronic Siemens handwheel.
2 pcs. Water pumps.

Multi Purpose Workshop type 4 axis Machine - Cutting, Profiling

OZKKM 5 Axis / HYDRA Waterjet Machine