Hydraulic DTH Drill Machine in China

Hydraulic DTH165-H Driller is suitable for fast drilling of stone in quarry:
● Multiple fastening points for easy relocation of the machine, especially suitable for fast drilling works in narrow spaces.
● Optimized double-hinge or universal ball joint between the headpiece and main frame make it possible for drilling vertical, horizontal or inclined holes.
● Unique slide guide and propulsion designs ensure fast feed and the straightness of drilled holes.
● Choice of power source to meet special working conditions in different quarry: pneumatic, pneumaticelectric or pneumatic-hydraulic.
● Hammers and drill bits of various specifications are available to meet the requirements for drilling stone of different hardness.

Description:

LIEYANKEJI Machinery adopting a mechanical fuel injection engine that meets the national emission standards, it has strong power, energy conservation, environmental protection, high reliability, and excellent performance. Key hydraulic components adopt the latest technological achievements, with low energy consumption and fast response.
Product Introduction:

PL1000L Rock Drilling and Splitting Machine is mounted on (24T-36T) excavators for use in a variety of hard rock square mining projects, to solve the hard rock efficient and environmentally friendly mining program. Make full use of its power and super mobility, can be applied to a variety of outdoor complex working conditions, unique L-type triangular swing articulation structure, stable and durable structure, can be adapted to various angles of construction, easy to disassemble and easy to transport, back mounted circuit and hydraulic system for easy maintenance and other features. The equipment is operated by a multi-channel and highly reliable wireless remote control. Utilizing the 22KW hydraulic rock drill, the rock drilling is carried out first, and then the P240 two-stage pressurized super splitter is used to enter the hole to split, so as to achieve the effect of high-efficiency rock static blasting.

Its high-efficiency hydraulic rock drill fully embodies the high economic drilling costs, hydraulic drive air compressor using excavator hydraulic drive, than the traditional (diesel-driven independent air compressor) more stable, lower maintenance costs, better economy. Splitting blocks are made of imported alloy forging material through advanced heat treatment process to make them more durable.
Rock drilling and splitting machine efficiency
Drilling approx. 2 minutes, splitting approx. 40 secs.
Side swinging and positioning about 50 seconds minutes.

Output per hole (theoretical)
2.5m (horizontal spacing) x 1.2m (vertical spacing)
x 1m (splitting depth) = 3m³.

Daily output (8 hours)
3m³(per hole) x 137 holes/day = 411m³

Product Parameters

Rock Drill Parameters Power (output) 22kW
Borehole diameter Φ89-127mm Drilling depth 1600mm
Drilling speed 1m/min Operating noise In line with GB 19872-2005
Splitter parameters Splitting depth 1000mm
Splitting force (two-stage pressurization) 12000T Angle of rotation 120°
Air compressor/vacuum cleaner Parameters: Exhaust volume 4.5m³/min
Exhaust pressure 5-8bar Number of cartridges 5P
Push Beam/Side Swing Parameters Maximum thrust of rock drilling 40KN
Maximum pull-out force for splitting 80KN Remote Control Parameters
Side Swing Velocity 1rpm Number of digital points 30
Range of validity 50m Anti-interference capability >50dB
Number of analog channels 14 Total weight 4T
Machine Parameters: Total width 1500mm
Overall length 4140mm Excavator requirements 24-36T
Overall height 1570mm

Characteristics
1. The Rugged track was driven by hydraulic motor with high traveling ability.
2. The feed and rotary head were driven by hydraulic motor, therefore, the air and oil consumption and total drilling cost are lower.
3. The hydraulic feed and rotary head put out the biggest feeding force and largest rotary torque, which makes it more suitable for operation in complex worksites.
4. The compressor equipped for the rig is smaller and cheaper than that one the air rig equipped, along with the best price-performance ratio than air rig.
5. The Hydraulic track oscillation makes it more suitable to drill in any rough terrain.
6. The carriage with rollers provides for minimal wear to the drill guide.
7. The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide tilt and guide dump.
8. The diesel engine and main hydraulic parts adopt imported products or famous domestic brand.
9. The special compensation device makes a full protection of drill rod threads.
CM358A hydraulic crawler down-hole drill rig is a multi-functional Rock blsting drilling rig driven by internal combustion engine, the hydraulic rock drilling rig power was provided by hydraulic system except for impacting and the hole cleaning wind. CM358A crawler drilling rig is convenient and efficient to operate. This mobile drilling rig is the best replacement for traditional pneumatic drills in most operation. The DTH Drilling rig is compact in structure, simple in operation, light in total weight. CM358A hydraulic crawler DTH drilling rig is widely used for blast-hole drilling in the mines and quarries.The wagon drill is also used for anchor in road, railway, power station, civil engineering and building etc.

Application
The rock blasting drilling rig DM100A/B is high powered with easy operation system. The pneumatic drill could be applied in open mine, water and electricity projects, railway and highway construction project. Within rock hardness range f=8-16,the quarry drilling machine can reach a higher drilling speed; the rubber hose braided with steel wire could bear high pressure; anchor holes could use on the two sides of slides by the M42X10X1.5 screw holes, which also could be used to fix optional (XQ) sled bearing drill holes 0 ° -90 °; or work with vertical shaft underground and Channel drilling 0°-360°borehole and ventilation, drain holes. The construction drilling equipment DM100A/B is really a gear helping hands for you to improve efficiency.
Characteristics
1. Forward, turn,and the impact of all the compressed air as power, structure simple ,power,relocation facilities.
2. In the single-top,double top, bearing-type three supporting structures to choose fom, can adapt to any geological features.
3. Centralized control mechanism, easy to operate.
4. Unique dual muffler, muffler effect, reducing environmental pollution

Description:

LIEYANKEJI Machinery adopting a mechanical fuel injection engine that meets the national emission standards, it has strong power, energy conservation, environmental protection, high reliability, and excellent performance. Key hydraulic components adopt the latest technological achievements, with low energy consumption and fast response.
Product Introduction:

PL1000L Rock Drilling and Splitting Machine is mounted on (24T-36T) excavators for use in a variety of hard rock square mining projects, to solve the hard rock efficient and environmentally friendly mining program. Make full use of its power and super mobility, can be applied to a variety of outdoor complex working conditions, unique L-type triangular swing articulation structure, stable and durable structure, can be adapted to various angles of construction, easy to disassemble and easy to transport, back mounted circuit and hydraulic system for easy maintenance and other features. The equipment is operated by a multi-channel and highly reliable wireless remote control. Utilizing the 22KW hydraulic rock drill, the rock drilling is carried out first, and then the P240 two-stage pressurized super splitter is used to enter the hole to split, so as to achieve the effect of high-efficiency rock static blasting.

Its high-efficiency hydraulic rock drill fully embodies the high economic drilling costs, hydraulic drive air compressor using excavator hydraulic drive, than the traditional (diesel-driven independent air compressor) more stable, lower maintenance costs, better economy. Splitting blocks are made of imported alloy forging material through advanced heat treatment process to make them more durable.
Rock drilling and splitting machine efficiency
Drilling approx. 2 minutes, splitting approx. 40 secs.
Side swinging and positioning about 50 seconds minutes.

Output per hole (theoretical)
2.5m (horizontal spacing) x 1.2m (vertical spacing)
x 1m (splitting depth) = 3m³.

Daily output (8 hours)
3m³(per hole) x 137 holes/day = 411m³

Product Parameters

Rock Drill Parameters Power (output) 22kW
Borehole diameter Φ89-127mm Drilling depth 1600mm
Drilling speed 1m/min Operating noise In line with GB 19872-2005
Splitter parameters Splitting depth 1000mm
Splitting force (two-stage pressurization) 12000T Angle of rotation 120°
Air compressor/vacuum cleaner Parameters: Exhaust volume 4.5m³/min
Exhaust pressure 5-8bar Number of cartridges 5P
Push Beam/Side Swing Parameters Maximum thrust of rock drilling 40KN
Maximum pull-out force for splitting 80KN Remote Control Parameters
Side Swing Velocity 1rpm Number of digital points 30
Range of validity 50m Anti-interference capability >50dB
Number of analog channels 14 Total weight 4T
Machine Parameters: Total width 1500mm
Overall length 4140mm Excavator requirements 24-36T
Overall height 1570mm

Hydraulic DTH165-H Driller is suitable for fast drilling of stone in quarry:
● Multiple fastening points for easy relocation of the machine, especially suitable for fast drilling works in narrow spaces.
● Optimized double-hinge or universal ball joint between the headpiece and main frame make it possible for drilling vertical, horizontal or inclined holes.
● Unique slide guide and propulsion designs ensure fast feed and the straightness of drilled holes.
● Choice of power source to meet special working conditions in different quarry: pneumatic, pneumaticelectric or pneumatic-hydraulic.
● Hammers and drill bits of various specifications are available to meet the requirements for drilling stone of different hardness.

Application
The rock blasting drilling rig DM100A/B is high powered with easy operation system. The pneumatic drill could be applied in open mine, water and electricity projects, railway and highway construction project. Within rock hardness range f=8-16,the quarry drilling machine can reach a higher drilling speed; the rubber hose braided with steel wire could bear high pressure; anchor holes could use on the two sides of slides by the M42X10X1.5 screw holes, which also could be used to fix optional (XQ) sled bearing drill holes 0 ° -90 °; or work with vertical shaft underground and Channel drilling 0°-360°borehole and ventilation, drain holes. The construction drilling equipment DM100A/B is really a gear helping hands for you to improve efficiency.
Characteristics
1. Forward, turn,and the impact of all the compressed air as power, structure simple ,power,relocation facilities.
2. In the single-top,double top, bearing-type three supporting structures to choose fom, can adapt to any geological features.
3. Centralized control mechanism, easy to operate.
4. Unique dual muffler, muffler effect, reducing environmental pollution