Quarry Wire Cutting Machine in Italy

Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features:

Diamond wire running system by electric motor

The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:

• 2 HP motor for the quick positioning of the machine on the rail.

• 0.5 Hp motor with automatic reduction gear for fine regulations.

The feeding on the rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding. The " S 1000" is featured by a special "electro-hydraulic" system for flywheel positioning. The rotation and a lateral movement of 40 cm per side are hydraulic, with solenoid valve control. A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width 2.0 mt. without moving the machine.

Special feature:

The machine is provided with special blower heating system for flywheel, to reduce icing during winter work.

Technical details:

Main motor power 50-60-75-100Hp

Feed motors power 2 Hp fast - 0.5 slow

Flywheel Ø 1000 mm

Wire speed : 40 Mt / Sec.

Width of cuts 0 - 2,0 Mt

Total weight 1800 Kg.

Dazzini Macchine Series 1000-Diamond wire cutting machine
Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features:
Diamond wire running system by electric motor
The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:
•2 HP motor for the quick positioning of the machine on the rail.
•0.5 Hp motor with automatic reduction gear for fine regulations.
The feeding on the rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding. The " S 1000" is featured by a special "electro-hydraulic" system for flywheel positioning. The rotation and a lateral movement of 40 cm per side are hydraulic, with solenoid valve control. A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width 2.0 mt. without moving the machine.
Special feature:
The machine is provided with special blower heating system for flywheel, to reduce icing during winter work.
Technical details:
Main motor power 50-60-75-100Hp
Feed motors power 2 Hp fast - 0.5 slow
Flywheel Ø 1000 mm
Wire speed : 40 Mt / Sec.
Width of cuts 0 - 2,0 Mt
Total weight 1800 Kg.

TELEDIAM 80 TD 80 (-100) Diamond wire saw for cutting large benches

Machine for large cuts in massive rock. The main electric motor (56

kW, 8 poles) is started by a star-delta system, and the motor shaft

carries the 102 cm aluminium flywheel. Two reducer assemblies

with electric drive allow 360° rotation and lateral shift of the flywheel

so that two parallel cuts can be made. OPTIONAL: inverter for

variable wire speed (0-30 m/s).

TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine.
Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source.
The machine is designed to be easily configured for transport from quarry to quarry on trailer.
Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired height and opened to align the wire to the face of the block to be cut.
The cut is performed vertically thanks to the movement of the arch structure along the column.
The wire is driven by a motor flywheel 1000 mm diameter and guided by 600 mm diameter wheels.
The entire cutting structure can also move along the rails (4 meters) placed on the top of the vehicle to allow the realization of different thicknesses with a single positioning of the vehicle.
All the drives are hydraulic and the main controls are operated by radio control device.

TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine.
Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source.
The machine is designed to be easily configured for transport from quarry to quarry on trailer.
Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired height and opened to align the wire to the face of the block to be cut.
The cut is performed vertically thanks to the movement of the arch structure along the column.
The wire is driven by a motor flywheel 1000 mm diameter and guided by 600 mm diameter wheels.
The entire cutting structure can also move along the rails (4 meters) placed on the top of the vehicle to allow the realization of different thicknesses with a single positioning of the vehicle.
All the drives are hydraulic and the main controls are operated by radio control device.

Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features:

Diamond wire running system by electric motor

The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:

• 2 HP motor for the quick positioning of the machine on the rail.

• 0.5 Hp motor with automatic reduction gear for fine regulations.

The feeding on the rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding. The " S 1000" is featured by a special "electro-hydraulic" system for flywheel positioning. The rotation and a lateral movement of 40 cm per side are hydraulic, with solenoid valve control. A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width 2.0 mt. without moving the machine.

Special feature:

The machine is provided with special blower heating system for flywheel, to reduce icing during winter work.

Technical details:

Main motor power 50-60-75-100Hp

Feed motors power 2 Hp fast - 0.5 slow

Flywheel Ø 1000 mm

Wire speed : 40 Mt / Sec.

Width of cuts 0 - 2,0 Mt

Total weight 1800 Kg.