If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General characteristics:
The SNM-DM is a heavy-duty high precision mono-bloc cutting machine suitable for all factories working in the stone industry. When equipped with the suitable tooling it is capable of working marble, granite, cement etc... It is easy to handle and maintenance free.
All guide ways are in hard chrome.
The main structure is made of heavy-duty steel in order to insure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates that are machined on three sides.
The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
The table slide ways are hardened and work in oil.
The replacement of slide ways is quick and inexpensive and enables this machine to keep its accuracy indefinitely.
Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0° to 45°.
The driving systems inside gears are case hardened before final grinding.
The machine is equipped with an insulated electric panel.
All components are mass-produced, safe and of high quality.
The machine has very low maintenance costs.
Optional features:
Electrical vertical, horizontal and lateral displacements: An articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, a potentiometer to control the advancing speed for both cutting directions.
Profiling: The machine can be equipped with a laser device for a very precise copying of profiles.
The machine can be equipped with 2 diamond blades, which is a great advantage when profiling.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AVS with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine). The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting slabs of natural stone, marble, granite and Grès porcelain stoneware, but also for bricks and brickwork. Toothed belt transmission means that the operator can remain stationary without having to move with the cutting head.
Manual inclination of the bridge from 90° to 0° by means of a simple lever or reduction gear – for those who wish greater precision during the operation of setting the degrees. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, precision laser, reducer for degrees regulating, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
FOB Price:$29999-89999
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Compared with ESAB,Miller, OTC,Lincoln Electric, our features：TOPtek Laser is an innovative high-tech company focusing on handheld laser welding solutions. Adhering to the deep professional ability, numerical control system, high-speed transmission system and other core technologies, we are committed to providing high-quality welding solutions to customers in various industries around the world.
After decades of development, the company has become a modern high-tech enterprise integrating research and development, sales, production and service.
TOPTEK
China
Shandong TOPTEK Co.,ltd.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
FOB Price:$10000-20000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Can customize one shaft/two shaft/three shaft. and
300mm/400mm/600mm/800mm working width. if 1000mm or up to 1000mm please choose Gantry type it will Stable production.
CKD
China
FOSHAN CHUANGKINGDA MACHINERY CO.,LTD
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:$35000-40000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Sandstone
Machinery Function Features:
3 axis CNC Bridge Stone Cutting Machine HSNC-500
An updated bridge cutting machine from HSNC-500, equipped with Simens PLC control system and 3 axis interpolation, is applicable for cutting all kind of stone slabs to size, such as granite, marble, quartzite and artifical stone slab etc., especailly suitable for processing stone countertop with sink. Relief processing is workable too.
Main Features
1) Controlled by Simens PLC system, operated expediently, accurately and stably.
2) One-button automatic vertical and horizontal cutting.
3) Cutting head available to rotate 0°-360° and positioning automatically. Blade can tilt 0-90° and do chamfering automatically.
4) With drilling & milling functions, make round sink processing easier and faster.
5) Working platform can rotate 0-360°，positioning at any angle, and tilt 85° for easy feeding.
6) Mono-block machine, easy for container loading and machine installation.
HUALONG
China
Fujian Province Hualong Machinery CO., LTD.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Technical characteristics
The SNIC Edge Trimmer mounts two spindles which remain in a fixed position and trim the slab from both sides as it is conveyed forwards on rollers.
The spindles which travel along guides mounted to the cross-beam are positioned manually or as an optional accessory a motorized screw assembly can be fitted for automatic spindle positioning operations.
The digital display shows the operator the width between the disks.
The hardness of the material determines the feed speed of the belt that can be electronically adjusted from 0 to 5 m/min.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AAS with motorized advancement of the cutting head (with inverter for regulation of advancement speed). Toothed belt transmission. The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting natural stone, marble, granite, Grès porcelain stoneware, bricks and brickwork. Inclination of the bridge from 90° to 0° by means of reduction gear (on the right hand side of the machine). The innovative system of inclination at 0° means that you can also work in the horizontal, making it possible to use a drilling kit. This accessory allows the operator to realize boring holes (maximum 80 mm) in paving tiles, marble and granite. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: electrical switchboard, extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: raised structure for using blade of Ø450 o Ø500 mm, diamond blades, drilling kit, extension side table in sheet metal 55×45 cm, goniometer fence, motor for adjustment of cutting depth, precision laser, speed reducer of the cutting motor, supplementary side table with rollers 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor. Grinding wheels for half-bullnose edge
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
$6000-12000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Can customize one shaft/two shaft/three shaft. and
300mm/400mm/600mm/800mm working width. if 1000mm or up to 1000mm please choose Gantry type it will Stable production.
CKD
China
FOSHAN CHUANGKINGDA MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$4000-9000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The advantage of using this machine
1. Very accurate cutting of 45°, much better than what bridge cutters can do.
2. The X- axis cutting speed is adjustable. Therefore nearly all kinds of materials can be processed.
3. No width limitation of the slab to be cut, Even the narrowest strips can be cut thanks to the pneumatic pistons holding the slab.
4. Designed with slab“face down”, it allows performing perfect 45°cut even on un-calibrated slabs.
5. The table's liftable rollers help move slabs smoothly, up/down driven by pneumatic pistons.
6. it is safe and easy to use. Maintenance is very simple.
STONEPLUS
China
Stoneplus Machinery Co., Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
$15500-20000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Can customize one shaft/two shaft/three shaft. and
300mm/400mm/600mm/800mm working width. if 1000mm or up to 1000mm please choose Gantry type it will Stable production.
CKD
China
FOSHAN CHUANGKINGDA MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MRF is the new automatic trimmer for cutting in a single movement marble, granite, natural stone and ceramic.
The trimming machine is composed of a conveyor belt and two discs with adjustable trimming sizes, in width and in height, by a manual handwheel.
To optimize cutting, according to the thickness and type of material to be processed, the speed of the conveyor belt can be adjusted through the variator.
The MRF is also equipped with a lateral guidance system and upper pressure that allows you to guide the material in the cutting phase, ensuring quality production, low operating costs with minimal space and the use of unskilled personnel, thanks to the ease of use.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Travertine
Machinery Function Features:
Garcia Ramos's cutting line is a complete and reliable group of machines to produce quality tiles.
The 350mm disc can cut tiles or a stack of tiles 70mm thick.
The line is equipped with turnover tables with motorized rollers and belts to move the tiles.
The controlled positioning system of the cutting machines guarantees the quality of the finished product.
Garcia Ramos
Spain
Garcia Ramos
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Cutting machine multidisc with one axle HRG-60. Make one-pass cuts to different types of materials, thicknesses and sizes. Ref. 8701
Cutting machine multidisc with one axle HRG-60
The HERSEN HRG-60 multi-disc cutter is designed to perform longitudinal cutting in a single pass of different types of materials, thicknesses and sizes. In this way we can obtain baseboards, skirting boards, cut samples or recover material with stability and precision.
The material to be cut is placed on the conveyor belt, and with a guide to keep the material aligned during the cutting process.
The disc holder shaft allows us to install several discs and separate them to different sizes to obtain different width measures in the pieces. Equipped with a powerful belt driven motor (not direct drive).
It has motorized vertical regulation to adjust the depth in the cut, diameter and wear of the disc during the cutting process.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The ITC ST is top of the range stone bench saws for construction sector. Their structure in stainless steel ensures maximum resistance to corrosive processes and atmospheric agent. Long lasting wet saws, very solid and precise; they are suitable for cutting all types of material (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 Ø400 mm. Available in single-phase or three-phase version.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in stainless steel, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: instruction manual, set of wrenches, side stop.
OPTIONALS: multilayer marine plywood (phenolic) work surface, diamond blade, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, goniometer fence, lateral fence, machine with structure for blades of Ø450 Ø500 mm, precision laser, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
$9000-14000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone
Machinery Function Features:
the CNC cutting machine can cutting and after cutting can do small chamfering for tile edge, cutting size can CNC control, have fast speed, small error, Easy Operation
CKD
China
FOSHAN CHUANGKINGDA MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Artificial Stone
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
The HXL-1 Cutting Machine Performs multiple simultaneous cuts in marble slabs to obtain small strips.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The HD-1 type single axis cutting machine, with one pass, allows the longitudinal cutting of strips and tiles, trimmed after the polishing line; to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
allows the longitudinal cutting of strips and tiles, finding today application in various sectors and processing phases: to cut after the finished line to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
Technical characteristics:
It is built with a single shaft for diamond discs;
Ensures quick replacement of both the complete removable disk sleeve, which of each individual disk, thanks to the front opening and upper part of the structure and the particular construction of the spindle;
It is equipped with spacers between the disc and the disc to measure cuts to execute;
It has a support surface made of motorized thick rubber tape, with adjustable advance speed according to thickness and type of material to be cut;
It works by motor / spindle with belt transmission, with the possibility of speed variation; It guarantees a perfect longitudinal cutting precision by particular lateral guides of the conveyor belt;
It has the motor of the shaft of the disc holder positioned so that as much as possible protected from any waste from processing and melting of water, guaranteeing safety, durability and reliability;
It allows the raising and lowering of the spindle support bridge to adjust the depth of cut, to compensate the diameter of the wear of the diamond discs;
It is completed with a wide adjustable lateral material guide bar, equipped, in the insertion part, with clamps that hold the material adhered to the belt and pressed against the guide bar;
Gives the operator complete control of the controls (spindle support lock, disc depth adjustment, guide bar positioning).
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
The HD-2 type cutting machine with one pass allows the longitudinal cutting of strips and tiles, to make baseboards, mosaics and all kinds of stone bases. By having two axes it allows cutting high thicknesses.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Cutting machine multidisc HR-2
Ref. 8704
The HR-2 type cutting machine performs a single pass longitudinal cut to materials of different thicknesses and different sizes.
By having 2 axes it allows cutting high thicknesses.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Parallel cutting multiheads HLS
Ref. 8601
HLS multi-head parallel machine has high precision and waste reduction.
Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing.
The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Parallel cutting with independent heads HR4
Ref. 8602
The Parallel cutting machine type HR4 is designed for the longitudinal cutting of a single pass of strips and tiles, this machine regulates the distance between the discs guaranteeing maximum flexibility in the change of measures.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2990/2200-6+9C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the
horizontal stacker and positioned waiting to enter the production line in such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 6 heads on mobile bridge N.8000-L-6C and the transversal cutter with 9 heads N.8000-T-9C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with
precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception Suction Cup, of particular design, is made up of a rectangular plate, capable of supporting
horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-6+9C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Longitudinal cutter with 6 Ø600 heads and mobile bridge, model N.8000-L-6C.
– 1 Transversal cutter with 9 Ø600 heads and mobile bridge, model N.8000-T-9C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200
Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS BRIDGE CUTTER N.8000-L-600-6C
Characteristic Specification
Machine width 4220mm
Raceway length 6000mm
Max separation between discs 1-6 2200mm (interior)
min separation between discs 1-2-3-4-5-6 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (6)
Total installed power 100 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS BRIDGE CUTTER N.8000-T-600-9C
Characteristic Specification
Machine width 5370mm
Raceway length 5500mm
Max separation between discs 1-9 3500mm (indoors)
min separation between discs 1-2-3-4-5-6-7-8-9 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (8)
Total installed power 150 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS OF CUTTING TABLES WITH BELT N.2304/2200
Characteristic Specification
table width 2960mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 11.5m/min
Drive motor power 3 hp
CHARACTERISTICS OF ROLLER TABLE WITH SELECTION STOPS N.2590/2200
Characteristic Specification
table width 2930mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200
Characteristic Specification
table width 2930mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 5m/min
Motor power after cross 2.5 hp
CHARACTERISTICS OF MOTORIZED BELT TABLES N.2426/2200
Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 2 hp
CHARACTERISTICS LOADING TROLLEY N.1289-V
Characteristic Specification
table dimensions 1880×3200mm
Frame dimensions 2560×1140mm
vacuum center 30 m3/h / 1.35 hp
Hydraulic power plant 4 hp
Carriage advance motor power 0.75 hp
Table motor power 0.50CV
speed scrolling cart 5m/min
speed displacement pins 7.5m/min
width max. worked 2200mm
CHARACTERISTICS ROBOT-MANIPULATOR N-3530
Characteristic Specification
Max load capacity 120 kg.
min format of work 300x300mm
vacuum center 100m3/h
Installed potency. 25 hp
cycle time min. 10” sec
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The SNM-CCE is a mono-block crosscutting machine with a single diamond blade that transforms slabs cut on the block-cutter into tiles of desired length.
The main structure is made of heavy-duty steel, and the disk is directly mounted on the motor.
A brushless AC motor with inverter powers the forward and return movements of the head.
When cutting the last few millimeters, the machine will automatically reduce its speed in order to guarantee a perfect edge.
Electric cables and tubes for tool cooling are supported by nylon cable holding chains.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Parallel cutting with two heads HFL-2
Ref. 8603
HFL linear cutting machines are for single pass strip and tile slitting with a manual positioning system.
They are designed to cut extremely hard materials (porphyry, slate) and have also found many applications in the marble and granite sector.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The new SNIC Multiple Cross Cutter machines offer extraordinarily high performance and productivity to eliminate the old bottle-necks caused by spindle translation for strip cutting.
These cutting machines, which are structurally identical, process strips up to a width of 600 mm or 800 mm and thanks to their powerful 7.5 hp motors, they cut in a single passage thickness up to 70 mm on marble. The SNIC-MCC cuts strips up to 3000 mm long and can mount up to 7 spindles with manual or sequential positioning.
The cutting movement of the disks is ensured by a single bridge sliding on high accuracy runner blocks with electronically adjustable cutting speed.
The cutting cycle is completely automated, without the intervention of the operator:
The marble strip to be sawn advances on a conveyor belt sliding over the milled table of the machine and stops automatically against a reference limit switch
The milled table automatically goes up to lift the strip away from the conveyor belt
The aligner/pusher pistons align the strip and push it against the side of the milled table
The Bridge moves the disks to cut
The cut finished, the bridge moves back to initial position
The milled table goes down and the conveyor belt moves the cut strips automatically to a motorized rollers.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
- Blade dimensions are Ø300 mm or Ø350 mm.
- Cutting length capacity is up to 133 7/8 inches (3400 mm)
- Easy to move on rail with roller system.
- Superior clamp system for increase accuracy.
- Water cooling system prevents damage to the blade and materials.
- Automatic overload power shut down
Abaco Machines
Viet Nam
Abaco Machines
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
HPO-Bridge Cutter
Portable cutter
It allows cutting pieces in a very fast and easy way.
A steering wheel is manually used to make the table work. This table is provided with mechanical stops in order to guarantee the cut pieces facing.
Different models depending on the disk sizes and the needs of the kind of cut.
CANIGO
Spain
MAQUINARIA CANIGO, S.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c
Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c
Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200
Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200
Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200
Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200
Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Sandstone, Travertine
Machinery Function Features:
Excalibur ® Lenght Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm., 2100 mm is current width of raw material, its physical structure is standardized in respect to these measurements.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2995-4C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this cutting line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The motorized roller loading table constitutes the feeding point to the cutting unit. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The cutter with 4 heads on mobile bridge N.8500, is a machine equipped with the latest technological advances in terms of its mechanical and electronic design. Above all, the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table stand out, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on which it moves, to carry out the work. cutting.
The movable disc-holder heads supported on linear guides on the bridge, with recirculating linear ball slides, also carry out the vertical movement guided on recirculating ball slides and driven by a spindle.
laminated with ball recirculation nut, to be able to position with great speed and precision, leaving the whole assembly perfectly protected by PVC bellows.
Headstock equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The whole machine and the heads are equipped with an implantation system with centralized greasing for easy maintenance.
Automatic rotary cutting table, it is built on a steel structure with a rectified upper plane, on which the conveyor belt rests with the outer surface covered with rubber to prevent the sheets from slipping during the cutting phase.
The unloading table with band has a frame built based on steel profiles with a transport band for unloading the cutting table simultaneously, while the cutting unit already receives the next board and is ready to cut.
In the electrical and control installation section, it is worth highlighting the installation of state-of-the-art automatons with programs custom designed by our technicians, so that the programming of the machine is as simple as possible, thus avoiding losses of unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on an operator terminal with a screen, where all the parameters of the cutting cycle are displayed.
The cutting line N.2995-4C/2200-G basically consists of:
– 1 Motorized plastic roller table N.2274
– 1 Cutter with 4 Ø600 heads and mobile bridge, model N.8500-800/4C
– 1 Rotating and motorized band table, model N.2304-G
– 1 Motorized band table for material outlet, N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200
Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS ROTATING TABLE WITH BELT N.2304/2200
Characteristic Specification
table width 2957mm
length max. of the table 4044mm
width max. worked 2200mm
Belt displacement speed 11.5m/min
Drive motor power 4 hp
CHARACTERISTICS OF MOTORIZED BELT TABLE N.2426/2200
Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 3 hp
Nodosafer
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite
Machinery Function Features:
Excalibur ® Width Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm.,1250 mm., 2100 mm is current width of raw material,its physical structure is standardized in respect to these measurements. For raw materials with marginal measurements, the solution is provided by special design chassis frames.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology.. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
You can cut marble slabs at 90° and 45° in X and Y directions with PLC controlled 3-axis movement capability. With the strong chassis structure due to NPU steel, you can obtain a smooth surface in cutting your granite slabs. Natural stone processing...
Longitudinal, transverse and 45 ° cutting machine,
X and Y axis cuts,
Cutting head and its table works fully automatic,
It has both manual and automatic double-page digital touchscreen management panel,
It can make automatic sizing in 10 different sizes,
Linear slide system is used for upper body movements,
Technical support is possible to the machine brain with internet connection,
Made of NPU 260 chassis.
Table height from floor: 90cm
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
- Ausavina Stone Saw TS1 has a casted aluminum working table guided by dual linear bearings on induction hardened chrome bars (avoid rusting).
- TS1 cuts accurately every time. Cutting angle ranges from 45 ~ 90 degrees.
- TS1 is now available with wheels for easy transportation.
- Powder-coated water pan provides additional strength while preventing rust and scratches.
- Includes a sturdy and lightweight steel stand.
- The submersible water pump provides a high output coolant for maximum protection to the diamond blades.
- Switch contains a thermal circuit breaker that protects against overload and short circuits.
- Features a specially designed table that supports larger size tiles.
- An adjustable stop guide is included.
- Built-in handles for easy transportation.
AUSAVINA CO.,LTD
Viet Nam
AUSAVINA CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
- The powerful Abaco Site Saw MOD-S1 features a 3HP motor and is guided by dual linear bearings on induction hardened chrome bar (Rust Free). The cast aluminum machined working table is for accurate cutting of all types of natural and artificial stone. The MOD-S1 Saw is suitable for construction sites and workshops. Incorporated in the MOD-S1 are wheels and rollers for effortless single-handed transportation. Model S1 features an electric direct drive submersible water pump.
- Saw can be provided with 3 HP single phase motor or 5HP three phase motor.
- Switch contains thermal circuit breaker, protecting against overload and short circuit condutions.
- One side bench with rollers plus 2 side support arms.
- Guided by dual linear bearings on induction hardened chrome bar- (Rust Free).
- Bolted down Cast aluminum machined, working table.
Abaco Machines
Viet Nam
Abaco Machines
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Base frame in painted iron and work bench in aluminium. Cutting head with manual sliding through use of a handle, on chrome-plated bars. The cutting head is adjusted vertically by means of a handwheel and can be tilted for 45° cutting. Submerged pump for disc cooling water. 1 side stop, 1 front stop, corner-shaped legs, and set of service wrenches.
OPTIONAL: Diamond cutting blade. Goniometer. Long goniometer. Side roller 50x100 cm.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
CROSS CUTTER M/C FOR MARBLE, CONCRETE, CERAMIC, GRANITE
CEAM S.r.l.
Italy
CEAM S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCombined 5 Axis Saw & Waterjet Cutting
$111000-116000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
1.37KW SIEMENS motor
2.All electric components are Schneider brand
3.Can do special size and special design according to customer’s demand
4.Free abrasive sand feeding system
5.We have most convenient automatic abrasive sand removing and recycling system for any brand water jet cutting machine
6.Imported intensifier pump
7.Use 8mm steel to make the cutting table stronger and keep the precision time for whole life
8.Soft cover for linear guider or gear and rack, can effectively prevent dust
9.Install an automatic oil tank for cutting table , no need maintenance of linear guider
10.Legitimate WINDOWS 7 system and install the Chinese newest water jet cutting system
China
Shandong WAMI CNC Technology Co.,Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
manual Hand-operated edge cutter, hand-operated stone saw- Single Disc Cutting Machine
China
Jinjiang Zhanzhi Machinery Parts Processing Factory
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Number of Head : 2/3 Adet
Diameter of Blade : 350 mm
Blade Motor Power : 5,5 kW
Motor Rotation : 3000 devir/dk
Max. Working Thickness : 30 mm
Max. Working Width : 650-1200 mm
Min. Working Width : 70 mm
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Parallel cutting with two heads HFL-2
Ref. 8603
HFL linear cutting machines are for single pass strip and tile slitting with a manual positioning system.
They are designed to cut extremely hard materials (porphyry, slate) and have also found many applications in the marble and granite sector.
HERSEN S.L
Spain
HERSEN S.L
Contact Supplier
Have a Question? Ask our expert
Ask now
