If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Categories:
Stone Block Cutting Machines (76)
Stone Slab Cutting Machines (123)
Stone Tile Cutting Machines (67)
Stone Surface Processing Machines (47)
Resin Line Machines (29)
Stone Finishing, Profiling Machines (262)
Stone Factory Cleaning Equipments (32)
Stone Handling, Loading Machines (79)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Factory Cleaning EquipmentsAir Dust Collector
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The water wall dust extractor has a double dust suction system. Outside there is a waterfall layer, generated to capture the heavier dust in suspension; inside there is another nozzle reduction system, needed for the complete dust removal of the suctioned air. Our suction cabin is designed for high performance and less maintenance. It is made of prime AISI 304 stainless steel. The MB water wall follows the guidelines of HSE Health and Safety Executive.
The operation and use of the MODULBOX MB system requires the operator to work in the front of the module, between the water layer and the linear vacuum opening. The dust produced is vacuumed by the fans through the opening located between the tank and the water layer. At first, part of the dust is reduced by the outer water layer while the rest is stopped by a water atomization system located inside the machine. The module also has a droplet separator that isolates the water atomization system from the suction unit, not allowing the water or dust to be discharged in the air. The purified air comes out from the top of the machine, allowing recirculation in the location. The water flow on the outer layer can be regulated using the gate valves while the flow of the inner water atomization system, for dust reduction, remains constant. It is also possible to access the machine for cleaning and routine maintenance of parts subject to saturation and inevitable wear. An additional fixed or mobile box of various dimensions with a frame in AISI 304 stainless steel and plexiglass panels can be applied to the front allowing the user to work even in areas subject to excessive turbulence. Whenever the laboratory ceiling is not higher than six metres, our anti-turbulence disperser called the PLENUM is recommended.
It is powered by:
-A power panel that is up to EC standards and American UL-CSA
-Submersible pump with pump body and back side impeller in AISI 304 stainless steel
-Highly energy efficient motors (category IE3)
-Easily removable drawer droplet separators on the front
-The containment tank below it is tilted for easy cleaning of the accumulated sludge
Turrini Claudio
Italy
T.C. Turrini Claudio srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Super Compact is the smallest in capacity and size of the whole range of Dal Prete compact systems.
Who is it designed for:
> If you have a new stone laboratory and you install only the machines strictly necessary: bridge saw and manual polisher.
> If you have a company that wants to start a specific production using one or two machine centers that need a lot of water but do not produce large quantities of sludge.
Features and advantages:
- Single block of only 4 m3: Space saving.
- Square shape: Maximized decanter volume.
- Automatic operations: Save time and reduce human error.
- Integrated clarification and dehydration: Ease of use.
- The waste product is dehydrated sludge: The working place is always clean.
- 10" touch screen with intuitive software.
- Control via LAN.
- IP55 protection against dust and water jets.
- Free space under the filter press.
- Shipped as a single piece.
Technical Details:
*Clarified water production: 150 l/min
*Total installed power: 7 kW
*Transport space: 3 m on truck or container
*Filter press plates: 4
*Plates dimensions: 300x300 mm
*Pressed sludge production: 0,8 m3/ 8 h
Customizations:
*Insulation of the plant, if you place it outside.
*Integrated system of tanks, for dirty and clarified water.
Dal Prete
Italy
Dal Prete Engineering Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Travertine
Machinery Function Features:
Superior C4000A - Diamond wire machine
Diamond wire machine is a cut system designed to obtain marble, granite and stone slabs of different thicknesses perfectly alike.
The "Superior" line has been designed specifically to square blocks, cut shims and slabs or also to cut shapeless stones or salvages.
The characteristic of base it is represented by precision of the cut and by a dimensioning of the structure particularly hardy.
TAF s.r.l.
Italy
TAF s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Contour sander for working marble, granite and natural stones. Ideal for creating top bath, kitchen, shower and sink in solid floors.
Technical features
Working area 2.000 × 1.000 mm
Spindle rotation speed 300 6.000 rpm
Installed power: Kw 4.5 to V.380 Hz. 50
Spindle stroke: 230 mm.
Total depth: 1,800 mm
Total width: 2,200 mm
Height: 2,200 mm
Total weight: 1,500 Kg
Emiltech s.r.l.
Italy
Emiltech s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling Machines
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Plasma Waterjet Combined Machine
Waterjet Corporation s.r.l.
Italy
Waterjet Corporation s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic machine for multiple linear cutting with diamond discs. Suitable for cutting ceramic tiles of any kind, marble, granite, glass and bricks.
ADVANTAGES OF MTR 500/2 ROBUSTUS
- Side opening for large sizes.
- Double hyper-static lateral support of the motor shafts for stability and anti-vibration.
- Autonomous water recycling and / or possibility of connection to general recycling system.
- 500 mm cutting belt.
- Possibility to have 1 or 2 cutting heads on the same frame.
Robostus
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
€10500-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Q.ty 3 Technoplit splitting machine, model TS 32/28, 50ton, 50cm h25, 2003
10.500,00 € repaint+complete refurnished
9000,00 € only set up to work
Stone Expert S.r.l.
Italy
Stone Expert S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesColumn, Balustrade Lathe Machine
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is operated with hydraulic feed and simultaneously the realization of n. 4 round columns done corresponds the same number of square columns.
Officine Carlino Fernando
Italy
Officine Carlino Fernando
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesStone Tools Machinery
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The new Diamut Grinder has been completely re- designed and is aimed at all the firms that intend to grind their wheels in-house.
A few minutes with this machine will be enough to bring the tools back to a condition of full efficiency.
It works perfectly well with tools produced by other firms too.
Workable tool diameter (min./max) 0.3 inch/13.7 inch Maximum workable tool thickness 4.7 inch Workable Profiles Concave and convex radius tangential with radius or straight lines. Angles with 0.1 degree precision. Tool attachment ISO 40 Grinding wheels dimensions Diameter 5.9 inch, hole 0.7 inch, thickness 0.11 0.7 inch Motor power and rotating speed Slow spindle (diamond tool) 1 HP 0.75 kW / 500 rpm. Fast spindle (grinding wheel) 1.5 HP 1.1 kW / 5600 rpm. Standard power 380 V - 50 HZ (other tensions available on request) Weight 450 lbs
Diamut srl - Biesse Group
Italy
Diamut srl - Biesse Group
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC type profiling, milling and cutting machines with numerical control
Bideseimpianti S.r.l.
Italy
Bideseimpianti S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesStone Tools Machinery
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite
Machinery Function Features:
Economic facility - for maximum production of 200 threads per month.
Advanced system - with direct injection system with the ability to automate the positioning of the beads. There are many advantages of this plant:
Shorter heating times
Shorter injection times
Shorter cooling times
No mattress to disconnect
Automatic rope shifting
Molds with multi-position fast-insert inserts.
CA PRESSE SRL
Italy
CA PRESSE SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The multiwire SW is definitely innovative both in appearance and performance. It is a machine with a two-column structure made using top-class solutions and components in order to provide the highest reliability standards. The multiwire SW, with identical technical solutions and supporting structure, are available with different cutting widths as to meet the customer?€?s specific needs. Besides, when purchasing the machine, it can be configured to operate with three different diameters of wires enabling a variety of possible versions.
Granite, Marble, Block, Blocks, Multiwire, 5.3
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesStone Tools Machinery
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EasySTONE is the ideal CAD/CAM for marble and similar materials working industry by numerically controlled machining centres.
EasySTONE is:
colums, vanity and kitchen tops;
bas - Reliefs;
funeral Art;
3D Modeling;
DXF, IGES, STL, PNT and RHINO (3DM) Import;
slab lifter management;
lathe management;
nesting true shape;
3D simulation;
collision detecion;
virtual milling;
slab import from digital cameras.
EasySTONE is complete and fully manages the stone processing avoiding purchase, maintenance, training costs for other additional products: from design to disposition of pieces and underpieces on the bench, 3D automatic collision detection with simulation, machining optimization and program generation.
EasySTONE, linked to DDXNest, manages geometric shapes nesting both interactive and automatic.
EasySTONE, linked to DDXPhoto, imports pictures of slabs from digital cameras.
EasySTONE is structured into four different steps: Design, Tools and Machining Management, Table and Pieces Disposition, NC-Code Generation.
DDX
Italy
DDX S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Travertine
Levi Tunisi
Italy
Levi Tunisi
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
Machinery Function Features:
* Maximum attention at customer’s satisfaction
* Customized and to our target functional machines
* Whole flexibility for possible new requests and adaptations
* High quality and certifications of offered products
* Continuous advice
* Prompt technical assistance worldwide
MEC srl
Italy
MEC srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Travertine
Machinery Function Features:
Italian Automatic and CNC bridge cutting machine for working marble,granite and stone.
Cutting,writing,digging out,lathe shaping.
NOAT S.r.l.
Italy
NOAT S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine.
Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source.
The machine is designed to be easily configured for transport from quarry to quarry on trailer.
Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired height and opened to align the wire to the face of the block to be cut.
The cut is performed vertically thanks to the movement of the arch structure along the column.
The wire is driven by a motor flywheel 1000 mm diameter and guided by 600 mm diameter wheels.
The entire cutting structure can also move along the rails (4 meters) placed on the top of the vehicle to allow the realization of different thicknesses with a single positioning of the vehicle.
All the drives are hydraulic and the main controls are operated by radio control device.
Total weight:7 tons
Translation speed on tracks low/fast:1,2 km/h - 2,3 km/h
Superable slope in autonomous movement:
30% (17°), in velocità lenta / in low speed
Angle of inclination limit of lateral tilting with machine in autonomous movement:35% (20°)
Diamond wire speed:up to 40 mt/sec, adjustable
Maximum sizes of the workable block:Width 3,8 mt; Height 2,5 mt
Maximum distance of the second parallel cut:max 4 mt
Diesel motor: 18,5 kW
Lenght of the diamond wire: 16,4 mt
Diameter of the diamond wire: 8,3 mm or less
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
automatic bridge saw with controlled head rotation. The four axis are motorized with brushless motor and controlled and interpolated. The axis movement is on tilted precise racks and the sliding is on linear ball bearing guides protected by bellows.
Single block machine in rugged costruction, built in electrowelded metal that has been hot galvanized and treated with special ceramic paints. Worktop, constructed with thick metallic tubular structure. Electric rotation and manual tilting 0-90 ° of the cutting head.
Industrial touch-screen control panel with optimizer of cutting program and MOULDING.
Cobalm
Italy
Cobalm srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
€15000-19000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Hydrotek srls
Italy
Hydrotek srls
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Five is an extremely precise 5-axis machining center and bridge saw (6 axis with the lathe), with automatic tool change and magazine, that can be extended according to specific needs. The possible configurations make the machine suitable for the execution of important works, from roughing to finishing, with highly detailed results. The precision of the Helios Five allows to achieve the greatest part of the stone processes possible, such as small and large sculptures and statues, kitchen tops with profiling and edge polishing, drain boards and much more. This feature makes Helios Five unique in its category.
As a bridge saw, the machine can work with disks with diameters of up to 725 mm. Thanks to its imposing structure and the technology developed by Helios. Helios Five can process all types of cut with extreme precision (45° angled cuts, shaped cuts, arches cuts angled on both sides etc…)
Helios Five can have the Z stroke of 680, 1000 or 1200 mm and can be equipped with the interpolated lathe, thus increasing the executable machining in the stone sector.
Stainless steel structure: Thanks to the stainless steel structure, Helios Five is a sturdy machine, that preserves its quality over the time;
Precision and reliability: The use of recirculating ball screws and zero backlash gears makes the machine’s movements extremely precise, thus producing highly detailed works;
High frequency inverter: Thanks to the use of high frequency inverter, that provides only the necessary power for the mechanical efficiency, there are no wastes of energy, and the maximum energy saving is guaranteed;
Security doors: The security doors have got a manual sliding system with automatic machine stopping sensor in case of opening;
Laser marker: The device shows in advance the passage of the disk, indicating the correct position of the cut;
Aluminium rectified table: The aluminium rectified table guarantees the integrity of the table and a total resistance to the processes stress and to corrosion. The
calibration, performed directly by the machining center, ensures the perfect flatness of the support surface. The rectified table and the separated slats offer the
possibility to set the pieces easily;
Tilting table: The tilting table, with the Easy-load solution, ensures the loading of any type of slab with the minimal effort;
Automatic tool change and tools magazine: Helios Five with automatic tool change manages all the machining center functions. The magazine, containing several tools ensures the maximum versatility in the tools choice. Its capacity can be modified according to specific needs.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Single wire contouring saw from 3 to 8 interpolated axes to make profiled cuts on marble and granite blocks such as: logos, tombstones, columns, twisted columns, columns shells, cylindrical and conical shapes, etc.
Micheletti
Italy
Micheletti Macchine By Kwezi S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing strips of marble with a width from 150 to 460 mm into two parts. and a thickness from 20 to 100 mm.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
TAGLIO 3DJ is the Taglio CAD/CAM software for stone working centres with up to 6 interpolated axis.
Taglio 3DJ is used for milling (contouring, drilling, pocketing, shaping, standard lathe, etc.), lettering (normal and V engravin) and 3 and 5 axis machining on 3D surfaces (blade and milling tools supported).
Taglio
Italy
Taglio S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
€-1
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
3/4 interpolated axes monoblock machining center
brembana speed is a Numerically Controlled Machining Center with three/four interpolated axes suitable for processing both slabs and blocks even with high thickness in marble, granite, composite stone, and ceramic.
It can perform each type of raw and polished contouring, as well as milling, drilling, countersinking, bas relief, and writing.
This machine can be customized to the customer's needs, it is the winning solution for every fabshop.
brembana speed is also available with:
- masonry or steelwork separate-supports (Open Frame)
- double worktable and separate-supports (Twin Open Frame)
CMS Stone Technology
Italy
CMS Spa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge:
The bridge is made up of a seasoned cast iron monoblock beam. The control panel and all the electrical and electronic equipments are jointed to the bridge which has refaced bearing wheels and slides on hardened steel interchangeable bars housed in cast iron bodies giving the maximum stability to all the assembly. The bridge traverse on the guides takes place with gears on high precision racks. Everything is protected against water splash by proper gaurds fixed to the bridge. The displacement can be checked through a visual system with metric / inch rule and on the display of the electronic programmer.
Bridge control unit:
The traverse of the bridge is carried out automatically by means of a self braking speed variating gearmotor or manually by means of a handwheel on side of the control board. During the cutting operation, the bridge is kept in position by a double electromagnetic locking device.
Carriage:
The accurately machined cast iron carriage determines the cutting speed. It slides with prismatic sliding blocks in oil bath on interchangeable slide tracks housed inside the bridge. The carriage control group allows progressive speed variation and high power transmissions by means of a special device, maintaining always a smooth a vibrationless movement. Inside the carriage, there is the cast iron vertical slide which allows the automatic rise and descent of the spindle by means of a gearmotor, screw and bronze lead nut. The slide moves on refaced and adjustable bronze screw nuts and is controlled by the equipment for the incremental step cuts.
Spindle:
"DIGITAL" version:
For vertical and inclined cuts from 0° to 90° in a single cut, the spindle is fixed to the vertical slide and rotates manually by means of a handwheel. A special two-speed 24 HP direct motor provided with special protection is fixed to the tilting group. the tilting group and the slide attachment plate are cast iron made and the rotation takes place by means of a special helicoidal gear and worm screw controlled by a handwheel.
"UNIVERSAL" version:
The spindle, for vertical and inclined cuts from 0° to 90° both ia a single cut and several incremental cuts, rotates by means of a handwheel and runs on a slide and a counterslide both of cast iron applied to the tilting group. The movement of the counterslide on the slide takes place by means of a speed reducer, screw and nut screw supported by a proper thrust bearing on adjustable guides. A two-speed 24 HP motor with special protection is fixed to the counterslide.
The "DIGITAL" machine is supplied in its standard version with no. 1 cast-iron worktable, manually rotating and lockable at 0°, 45°, 90°, 135°.
On request, the following worktables can be supplied:
a - Cast-iron manually rotating worktable, lockable om each of the 360° by suitable disc brake.
b - Manually rotating worktable complete of hydraulic tiltic platform for the vertical loading of the slabs. It can be locked at each of the 360° by hydraulic caliper brake and is supplied with wood supporting frame for slabs.
Worktables type "STANDARD" and "A" can be also supplied on request sliding on rails.
The "Universal" machine is supplied in its standard version with no. 1 cast-iron worktable, manually rotating, lockable at 0°, 45°, 90° and 135° and liftable by hydraulic cylinder.
The worktable is realized in cast-iron and the rotation is secured by suitable double crown of balls of large diameter to allow max stability.
On request, the following worktables can be supplied:
c - Cast-iron manually rotating worktable, liftable by hydraulic cylinder and lockable on each of the 360° by hydraulic caliper brake.
d - Manually rotating worktable liftable by hydraulic cylinder and complete of hydraulic tilting platform for the vertical loading of the slabs. It can be locked at each of the 360° by hydraulic caliper brake and is supplied with wood supporting frame for slabs. Centralized control panel:
It comprehends the control of the electronic and electric equipments. On this panel there is the electronic programmer which gives the following possibilities:
- automatic marble cycle
- automatic granite cycle
- possibility to set several cutting measures in the quantity required (max. 99 possibilities)
- possibility to store the inertial displacement and the disc thickness. Electric panel:
Comprehends the equipment for the carrying out, control and safety of the various working operations.
Only the connection between the power line and the electric panel of the machine have to be done by the customer.
Water plant:
It comprehends all the pipeline, from a fixed connection point up to the fork. Cutting possibilities of the various version:
DIGITAL: on marble it is possible to carry out up to 220 mm. deep cuts with Ø 725 mm. disc. On granite it is possible to carry out inclined cuts in one step up to a depth of 35 mm. with Ø 500 mm. disc and several vertical step-cuts up to a maximum depth of 180 mm. with Ø 625 mm. disc.
UNIVERSAL:on marble it is possible to carry out up to 220 mm. deep cuts with Ø 725 mm. disc. On granite it is possible to have several vertical step-cuts to the maximum depth of 220 mm. with Ø 725 mm. disc and inclined cuts of 45° in several step-cuts up to a maximum depth of110 mm. with Ø 625 mm. disc.
The cutting possibilities listed above can be obtained by means of suitable equipments which have to be definied in the stage of ordering the machine.
Spindle motor 24 HP double speed (for marble and granite) (4/6 poles)
Two speed motor (fast-slow) for bridge displacement
Electronic programmer for automatic cuts on marble and granite and for setting different cutting widths
Motorized spindle feed visualized and programmable on display
Tilting spindle from 0° to 90° (Digital type)
Tilting spindle from 0° to 90° with counterslide for incremental inclined step-cuts on granite (Universal type)
Amperometric limiting device of the maximum load of the disc motor
Automatic machine switch off at the end of the cycle
Double automatic bridge locking device during cutting operations
Cast-iron worktable with manual rotation and locking at 0°, 45°, 90°, 135° (Digital type)
Cast-iron worktable with manual rotation, lockable, with disc brake and liftable by hydraulic cylinder (Universal type)
MORDENTI S.R.L.
Italy
MORDENTI S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The stone bench saws ITC AL are ideal for the construction sector and for everyone who needs to move their machinery often. Professional wet saw, very light and resistant to corrosive processes, thanks to their structure in aluminium. Solid, precise and versatile they are adaptable to cutting all materials (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 Ø400 mm. Available in single-phase or three-phase version.
Stone bench saws equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in aluminium, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: goniometer fence, instruction manual, set of wrenches.
OPTIONALS: multilayer marine plywood (phenolic) work surface, diamond blades, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, lateral fence, machine with structure for blades of Ø450 Ø500 mm, precision laser, side stop, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
€20000-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Manual table cutting/milling machine type: “A 500”
Machine complete With:
- Sliding worktable with length 250 cms. manually actioned.
- Max cutting length 300 cm
- Length of under table 500 cm
- Spindle motor HP 10
- Max diameter diamond disk ? 500 mm.
- Manual spindle lifting/lowering of 30 cm
- Manual spindle traverse of 75 cm
- Manual tilting spindlE 0-90°
- CE Electric and water plant.
- Operation and control devices.
- Worktable, spindle and column, cast-iron made totally.
MORDENTI
Italy
MORDENTI EXPORT S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
motorized bridge saw with three axes with servoventilated AC motor, controlled by positioner.
Single block machine in rugged costruction, built in electrowelded metal that has been hot galvanized and treated with special ceramic paints. Worktop, constructed with thick metallic tubular structure. It is fast, precise and reliable, builty of sturdy metal and does not require masonry work for installation. Electric rotation and manual tilting 0-90 ° of the cutting head, as standard. Control panel with color display touch-screen TFT 7”.
Cobalm
Italy
Cobalm srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Igloo stone splitter is an open frame machine model, highly productive, simple to maintain, an ideal solution for your quarries and the best choice as cubes splitting machine. Splitting machine models range from 160-640mm in blade length and 20 -180 tons of splitting pressure. All models are supplied with a highly efficient hydraulic unit using only the best performing hydraulic components. The Igloo machines are designed for splitting hard material in continuous use and are well known throughout the world for their resilience and precision processing hard stone. These machines are used to split granite, limestone, sandstone, slate, porphyry and many other types of natural stone products.
The Igloo 160, 240 and 320 models are used for the production of split paving, cubes and natural stone tiles. The Igloo 400, 480 and 640 for wall stones and large cubes, whilst the Igloo 500 and 600 for split kerbstone, large wall stones and as primary machines in a configured splitting line for the production of various split natural stone products.
High production, low cost stone cobble splitting machine. Our Igloo stone splitters come with various options including conveyors, feeders, hoppers and manipulators to both improve productivity and optimize safety. All Igloo splitters can be configured in Steinex production lines as primary or secondary splitters depending on the model and desired final product.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Monofil BM 2300 single wire machine for squaring blocks
The single wire machine is perfectly suitable for squaring blocks or cut very big thickness slabs, installing one diamond wire.
The machine is supplied with a fixed trolley for the blocks, in order to cut big thickness slabs; otherwise the machine is supplied with a rotating bench trolley, in order to square the marble blocks.
The structural construction of the diamond wire frame saw is made in two uprights columns, connected together with a cross steel structure. The MONOFIL BM 2300 machine installs two flywheels of Diameter 2300 mm.
Frame used to square off blocks of marble or granite and saw very thick blocks.
Flywheel:
On the sides there are two load-bearing uprights where the flywheel supports slide. A gear motor with inverter turns the flywheels at a constant speed of 37 metres per minute, or at a variable speed ranging from 5 to 37 metres per minute. The wire is tightened using
a hydraulic cylinder managed by a control unit which, if the wire breaks, automatically stops the machine.
* The useful sawing dimensions can be varied upon request of the customer
BM
Italy
BM Officine Meccaniche S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving Robot
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
SANDROB: MARBLE, NATURAL STONES AND SOLID SURFACES
SandRob is a 7-axis robotic system able to perform surface finishing operations on complex shaped objects of any size.
SandRob brings benefits of robotics into manufacturing processes where high manual skills are usually required but working conditions are extremely strenuous, repetitive and dangerous for human health.
Following the great success in the industrial sectors such as automotive and aerospace, for processing on composite materials, SandRob aims for applications on objects made of natural stone, marble, granite and solid surface, such as bathtubs, shower trays, sinks, coverings, furniture and more.
Main features:
• Sanding and water polishing
• Rotary tools of different sizes and powers
• Use of diamond abrasives of various grits and sizes
• Automatic tool change
• Repeatable work cycles with different grit abrasive
• Total control of parameters, such as force and speed
• Repeatable results and consistent quality
As the entire range of Roboticom robotic systems, SandRob is equipped with our ARPP® programming software. ARPP® is the result of over 20 years of research and development that have allowed us to obtain the most powerful OFF-LINE PROGRAMMING AND SIMULATION tool on the market.
Thanks to its ease of use, we guarantee quick learning and minimal start-up times.
ROBOTICOM
Italy
Roboticom Fabrica Machinale Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Single Head Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Zenit is the a 3 interpolated axes CNC polishing / calibrating machine with automatic tools change, for the treatment of marble, granite and agglomerate surfaces. It allows to calibrate, polish, smooth, brush and also drill, to perform engravings, straight and curvilinear cuts with incremental passes by means of diamond milling tools.
It is an extremely flexible machine, ideal for those who need a complete equipment to treat even particularly delicate surfaces or to finish mosaics or inlays.
Its strength lies in the dual-control system of pneumatic and mechanical handling of the polishing and calibrating tool; the result is an extreme precision with excellent performances on any material.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Mini Compact M 2.0 is the second largest system in the Dal Prete range of compact plants.
Who we designed it for:
> If you have a new stone laboratory on the rise and you are installing new machinery to move from an artisan to an industrial production.
> If you have a company that needs a fair amount of clarified water but produces a few sludge.
Features and Advantages:
- Single block of only 6 m3 Space saving.
- Automatic operations: Save time and reduce human error.
- Integrated clarification and dehydration: Ease of use.
- The waste product is dehydrated sludge: Always clean working place.
- 10" touch screen with intuitive software.
- Control via LAN.
- IP55 protection against dust and water jets.
- Shipped in two parts: the cylinder and the platform containing all the components.
Technical Details:
*Clarified water production: 300 l/min
*Total installed power: 8,5 kW
*Transport space: 4,5 m on truck or container
*Filter press plates: 4
*Plates dimensions: 300x300 mm
*Pressed sludge production: 0,8 m3/ 8 h
Customization:
*Material of the decanter: stainless or galvanized steel.
*Height: available also lower (3400 mm).
*Clarified water production: up to 600 l/min.
*Base insulation.
Dal Prete
Italy
Dal Prete Engineering Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
PC controlled work centre, Master 23 is Intermac’s new proposal dedicated to the stone processing. The careful analysis of the commercial and technical requirements filtered by Intermac experience, have brought to the intuitive conception of an easy operating machine, where the numerical control is completely integrated into the PC structure with Windows XP, that allows an automatic machine management and high configurability. Thanks to its high technology and flexibility, Master 23 can be adapted to the specific productive and economic requirements of the client and offers the possibility to select between different configurations. It satisfies the requirements of big enterprises and little craftsmen through the optimum management whether of the complex and long duration installations, whether of the short installations dedicated to the production of large series, reaching high quality results with a reduced investment.
A COMPACT SOLUTION FOR EVERY NEED
The Master 23 is the most compact machining center created by Intermac for the machining of stone. It is suitable for the needs of large companies that need to produce large batches, but also for small artisans who decide to invest in the growth of their company and in the evolution of the production process.
INTERMAC TECHNOLOGY
The high technological content of the world's most popular working centers satisfies the specific needs of the stone industry. Configurations with 3 or 4 axes fitted with aggregates for managing a vast range of machining operations. For all the configurations, the components are the same as for the top-of-the-range solutions.
Intermac
Italy
Intermac Glass & Stone Division - Biesse Spa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
STRENGHTS
The machine can be considered the state of the art of polishing machines.
BEST QUALITY IN POLISHING
HIGH PRODUCTION RATE
LOW OPERATING COST
Thanks to:
Highest reading precision of the shape of the slabHighest stability of plates holding the abrasivesFast and accurate movement of the head due to HSS systemErase of “shadow” problem on the polishing surface thanks to the Proportional ValvesVery high dynamic of the beam thanks to its perfect balancing and to the couple of brushless motorsLow consumption of the abrasive thanks to the reduced vibrations due to special PTFE slidersReduced electric consumption thanks to a high efficiency mechanics
THE BENCH
Steel carpentry structure of great sturdiness.
Two large diameter rollers (500 mm) for a more uniform movement of the belt
THE BEAM
Tubular-rectangular section with huge flexional and torsional stability
Spindles housed inside the beam
Great stability of the beam in all working conditions thanks to the coincidence of the center of gravity of the beam with the axis of the spindle
BEAM HOLDING AND SLIDING SYSTEM
Sliding on oil-bath slider system on hardened steel, duly protected from water and dust seepage
Longer life of the consumable materials due to an almost total absence of vibrations of the operating plates thanks to two sliders done on antifriction material
Slider perfectly aligned with the prismatic guide thanks to a special cylindrical support system
SPINDLE
Very stiff spindle group, whose components are absolutely protected
High performance belt very easy to inspect
Forged steel shaft, lubricated by means of a progressive batcher, with grease recovering, opportunely warning about eventual anomalies
OPTIONAL
HSS (Hydraulic Stroke Control) Systems
Solution that will minimize the vertical displacement of the head during the processing phase, based on the inclusion in one of the pneumatic cylinders of a hydraulic circuit whose locking stops immediately the vertical ascent of the head.
The advantages are obvious and intuitive:
higher quality of the border of the slabs although considerably irregular
best support of the abrasive tool while working on the border of the slab with a reduction in the consumption of abrasive
increased productivity of the machine
extreme sweetness in the contact between the head and the material through the hydraulic adjustment of speed
CENTRALIZED LUBRICATING SYSTEM
Lubricating system having a progressive butcher that grants the right quantity of lubricant to the bearings, the rack and the beam transmission pinions
A controlling device opportunely checks and signals any eventual anomalies
AUTOMATIC SLAB READING SYSTEM
Reading accuracy of one millimeter on the edge of the slab
Absence of any problem with the sliding of the entering slab
READING SYSTEM FOR ABRASIVE WEAR DETECTION AND INSTANTANEOUS HEAD POSITION
Instantaneous reading of the abrasive consumption and thus the possibility of a final accounting of the exact costs for each contract being processed
Possibility of an accurate reading even when in machining are present simultaneously slabs of different thickness
PROPORTIONAL PNEUMATIC VALVES
Pressure adjustment of each head from the control panel
Selection of slab work zones with differentiated pressure depending on the processing requirements
Memorizing sequences of optimal pressure for the various types of material with ability to recall such configurations optimized for subsequent similar processing
ELECTRONIC HARDWARE DESCRIPTION
THE ELECTRONIC CONTROL
The operation of the machine is given to the PAC (Programmable Automation Controller), a motion controller that can handle up to 32 interpolated axes, controlled via EtherCAT Artemisia is remotely reachable at any time.
THE BUS ARCHITECTURE
By using dedicated components, measurement and acquisition of physical quantities, the development of strategies for the implementation of automation and controls occur only in digital form and the physical medium used to transport the data and then to interconnect the various devices is the bus.
With a distributed topography of the electrical system will have cost savings in wiring and installation, easy addition or removal of devices, reducing installation errors, resource sharing and flexibility.
THE COMMUNICATION PROTOCOL
The EtherCAT is a technology for real-time communication based on Ethernet, particularly suitable in the communication between the control systems and peripheral devices such systems, I / O, sensors and drives
SOFTWARE DESCRIPTION
Simple, intuitive and comprehensive software is composed of a “motion” part that manages the dynamics of the axes and a “logic” part that manages all aspects relating to the commands of the organs of the machine, the safety during operation and statistics relating to the production process.
The operator interacts with the software through a graphical interface installed on a Touch Screen support.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Technosplit 220 Ton multitooth complete line (machine+hopper+conveyour belt+accesories)
Model TS 100/140X40
Stone Expert S.r.l.
Italy
Stone Expert S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesWheel Loader for Blocks
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone
Machinery Function Features:
Mobile crane riconditioned from mother factory. Capacity 9 ton
Mediterranea Marmi srl
Italy
Mediterranea Marmi srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SIMEC completes its range of multiwire machines SIMECWIRE SW with different solutions for squaring blocks and cutting thick slabs by means of monowire machines. The SIMECWIRE/01 machines can be efficiently used for preparing blocks to the next cutting phases, performed by multiwire machines or they can also be directly used for sawing blocks into slabs, assuring the highest standards in terms of accuracy and productivity for this typology of machines.
Granite, Marble, Block, Blocks, Monowire, 5.3
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Travertine
Machinery Function Features:
DGS1800: Marble strips gang saw
Marble gangsaw, version whit the lifting of the block, specifically designed for the cut of layers into strips up to a height of 650 mm.
The layer is fixed on the platform by a vacuum system which allows the perfect anchoring of the material during the cutting solicitation. When the blades are completely inside the material, an automatic oleodinamic pusher starts in order to make the strips compact in to keep the stability even if the material is fragile or defective.
Gaspari Menotti S.P.A.
Italy
Gaspari Menotti S.P.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
MBS TS is our best-selling bridge saw; the perfect combination of simplicity, flexibility and durability. The installation is easy and does not require foundation. The machine is equipped with a compressed, rectified and chromed “active beam” guaranteeing the utmost accuracy. The rotation of the head allows to perform interpolated angle cutting in all directions.
ADVANTAGES
MBS TS is our historical monoblock bridge saw with CNC axis control unit for cuts programming:
Fully customizable according to customer requirements;
Monoblock structure for easy installation;
The perfect cutting precision is guaranteed by the special design of the beam;
Manual or automatic head rotation to perform interpolated angle cutting in all directions.
Achilli
Italy
Achilli s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesSingle Wire Block Squaring Machine
€18000-22000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
set 400 is made to cut marble and stone up to 35cm/13,87 inches. Particularly suitable to be used in funeral sector, buildings and housing units, urban and road construction, sidewalks and curbs, barrier indusry.
features a diamond wire saw, hydraulic motor, articulated arm, central column and material support
Italy
MD-Dario Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Single wire contouring saw from 3 to 8 interpolated axes to make profiled cuts on marble and granite blocks such as: logos, tombstones, columns, twisted columns, columns shells, cylindrical and conical shapes, etc.
Micheletti
Italy
Micheletti Macchine By Kwezi S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCombined 5 Axis Saw & Waterjet Cutting
€1-2
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
brembana formax jet is a Numerically Controlled 5 interpolated-axis bridge saw equipped with tilting head and fixed table. It can carry out any type of machining, cutting (straight or shaped, vertical or inclined), 3D profiling and milling operations, on marble, granite, composite stone, and ceramic as well as stone blocks.
The machine is equipped with an abrasive waterjet cutting head that, working in combination with the diamond disk, enables automating natural and composite stone slab cutting operations when interfering cuts and internal angles are a factor. The AWJ head, integral with the main head, allows variable and small radius cutting, which would be impossible with just the diamond disk.
CMS Stone Technology
Italy
CMS Spa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Wire cutting machines management up to 10 axes
Erotag is the CAD / CAM software for wire cutting and shaping machines that can interpolate up to 10 axes.
It is suitable for program profiling, roughing of blocks and to create complex shapes, such as; cylindrical columns and conical shells for covering the columns, templates for furniture, stairs and frames.
OPERATION
Erotag allows the user to freely assign the machining cycles and the order of items to be processed.
The 2 or 4 synchronized axes is useful for cylindrical or constant conical machining while the 4 or more independent axes contouring allows variable conical machining in which profiles on the two planes of interpolation (typically XY and UV) have different shapes.
Possible options, such as slowing down, can be assigned automatically or manually as well as linear unloading, circular unloading, pausing on edge work, work regimes and synchronization points. The start and stop points on the profile are independent on the two planes of interpolation.
Erotag is part of the CAD Logotag that allows users to generate the machining profiles in the simplest and quickest way, without using third-party drawing programs.
Taglio
Italy
Taglio S.r.l.
Contact Supplier
Have a Question? Ask our expert
Ask now
