Quartzite Single Disc Cutting Machine in Turkey

The machine, which is mounted on a steel chassis, has a closed and oil reservoir rail system, and the speed control and the dimensions given with the desired cut precision cuts.
Saw speed and car speed tab is the target of the desired cut, while the target is to exit at high speed
Fully Steel is Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slide is Supported with Water-Free Protective Guards.
Our machine works with the help of cutting 90 degrees and 45 degrees reducers.
Flat Water Motor Has Been Used On Our Machine Head Cutting Up Down Inner Shell System Using Special Materials To Provide Precise Cutting In Bridge Cutting Machines, It Serves As A Sliding Coupling.
Our Wagon Side Cutting Machine is Designed as Both Cutting Sizing and Side Sizing.
Our machine Head rotation folk movement (C axis) is Manual
Our machine is 45 degree movement manual with reducer
Our machine is Slide Movement (Y axis) AUTOMATIC / Manual
Our machine is WAGON Movement (X axis) AUTOMATIC / Manual
It can be used both manually and automatically.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
The Machine Has Been Made Completely Steel NPL-U
With the help of a reducer, it provides speed controlled automatic cutting.
Information on the materials used in the machine
Electric Motors: Reducers
* Motorized Gearbox for Slip Ways (Transmission 0.75 gamak motor transmission)
* Piston Sliding Motorized gearbox (Transmission 0.75 gamma motor gearbox)
* Motorized transmission for transport wagon movements (Transmission between 0.75 motorized transmission)
* Gear box for 45 degree cutting movements (Flywheel / Gear Box)
* Straight waterproof motor for marble and granite cutting works (9.3 kW 1500/3000 double rounded peasant motor)
Movement / Walking Systems:
* 0.5 '' steel gear mechanism for transport wagon movement
* Head cutting motion system with the help of trapeze.
* Cable transport systems, sliding paths are applied on the motion functionality.
* Transport wagon Closed sliding track walking equipment is provided with transmission crank.
Steel Construction of the Machine
* Side cutting machine is steel monoblock and massive.
* The chassis is made of 320 NPLU material.
* The transport wagon is designed from 80 X 20 material.
* The carrier wagon also has a steel chassis and is processed in 6 axes on CNC machines.
* The rear tower is made of 10 mm thick solid sheet metal and designed to reduce the vibration of the machine.
* Top slide ways are processed from 10 mm solid sheet metal to 8 mm between the grid in CNC machines.
* Wagon parts, wagon wheels are made of chiffon gg50 alloy to resist wear.
* Piston System is solid steel thick pipe.
* All head cutting group parts are cleaned in the milling machine.
* Head group parts are covered with anti-corrosion and rusty parts.
…… .. …… .. WORKING PROCEDURE OF THE MACHINE ………………
Periodic maintenance of the machine should be done daily, weekly and annually.
Lubrication of critical parts of the machine should be done regularly. (such as hubs of pressure impellers, slide ways, engine lubrication pump, etc.)
In case of problems caused by poor maintenance or lack of maintenance, the buyer company covers the repair and repair costs.
Our company provides technical support as soon as possible depending on the conditions.
In case of any malfunction or incorrect operation depending on the user, any intervention will be performed after an expert inspection on the machine.
It is under warranty for 1 year.
It is the buyers' duty to supply on-machine cutting saws.
The machine's consumables are not covered by the warranty. (such as cut-off saws)
Accommodation and transportation costs of the assembly team belong to the buyer company.
… ..…. ACTIONS THAT MUST BE TAKEN BY YOUR PARTY DURING THE INSTALLATION PHASE… ...
An electrician is required for the installation of the cable connections to provide 13 kW of electricity near the fuse board of the machine.
To provide plumbing next to the machine.
Cutting saws must be provided on the installation.
Required space for machine installation: 7000 mm X 3000 mm X 2500 mm (height)
One can of machine oil (30 size), one can of Grease.
Marble Side Cutting ...

SCHIND CC01 Marble and Granite Cross Cutting Machine
Only the transverse cutting machine cuts jagged edges without any difficulty with its powerful motor.
It cuts straight on Y axis… No 45 ° cutting, No head rotation to another directions,
Cutting ability is net 800 mm on Y axis,
Cutting head group moves on the linear slides by button / joystick. Saw Forward – Saw Backward,
Marble slabs can be easily load on the plastic rolls for squaring,
Cutting speed is adjustable
Option: assembling bellows to cover upper body moving linear with additional cost

The machine, mounted on a steel frame, has a closed and oil reservoir rail system, with Linear Slide Kremier Transfer. The desired cut with the measurements given with the speed control makes precise cutting.
(AUTOMATIC) System Is Switched To Automatic Mode, The Barrel Moves Down Manually, The Wagon Starts To Cut The Stone, The Wagon Stops The Wagon Waits For The Head.
(SEMI-AUTOMATIC) Sizing values ​​are entered on the screen. The system is taken to the sizing mode, the dimensions of the stone are entered, the hive moves automatically downward, the wagon starts to cut the stone, the hive is raised automatically when the wagon comes out of the ship, the wagon comes to the beginning. BiteR when the menstruation is complete
(XY FULLY AUTOMATIC) It is taken to the screen in full automatic mode, XY values ​​are entered. The length of the parts to be cut is entered, the number of the parts, the dimensions are written, the hive moves automatically downwards, the car moves automatically, the stone starts to cut, the barrel automatically rises up when the wagon comes off, the wagon comes to the head tower counts the skid gauge and The Hive Retracts The Cutting (X AXIS When Cutting Is Finished, The System Turns Its Head Automatically, It Starts To Diminish The (Y) Minus In This Way, It Continues Up To The Plate Bit.
Fully Steel is Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slide System is Purified from Water, LİNER RAIL, Protective Bellows System is Integrated.
Our Machine Cutting 90 degrees and 45 degrees Reducer Works Automatically.
Flat Water Motor Has Been Used On Our Machine Head Cutting Up Down Inner Sleeve System Compare In Bridge Cutting Machines By Using Special Materials To Provide Precise Cutting, It Serves As A Sliding Coupling.
Our Wagon Side Cutting Machine is Designed as Both Cutting Sizing and Side Sizing, XY Sizing with full size system.
Our machine Head rotation circular movement (C axis) is AUTOMATIC
Our machine is AUTOMATIC with 45 Degree movement reducer.
Our machine is Slide Movement (Y axis) AUTOMATIC / Manual
Our machine is WAGON Movement (X axis) AUTOMATIC / Manual
Both Manual, Automatic, Semi-Automatic. Fully Automatic, Usable.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
With the help of a reducer, it provides speed controlled automatic cutting.

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 680 mm
Çalışma Kalınlığı / Working Thickness 75 mm
Bant Motor Gücü / Band Engine Power 2 hp
Testere Motoru / Saw Engine 15 kw 3000 dev/dak (Rpm)
Testere Çapı / Saw Diameter 450 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 2 hp
Toplam Güç Tüketimi / Total Electricity Consumption 6,25 kw
Ebatlar / Dimensions 190 x 190 x 480 cm
Ağırlık / Weight 1500 kg
Kontrol Paneli / Control Panel PLC Otomasyon / Automation

* Cutting course 3400 mm.
* Saw Diameter 350-400- mm.
* Saw engine 7.5 / kv 1400/2800
* Wagon movement / Manual
* Wagon dimensions are 3000 x 1300 mm.
* Up and down motor 0.75 kv
* Reciprocating motor 0.75 kv
* Slide action / FORWARD BACK Liner Slide
* Steel Npu Chassis
* Machine length - 5500 mm.
* Machine width 2500 mm.
* Machine height 2000 mm.
* Approximate weight 2000 kg. - 2300 kg.
* Wagon manual
* Total Required Power 10 KW
* Required Water Flow 8 Lt./Min.
* 45 degree cut is with flywheel reductor
It is our Monoblock Machine mounted on a steel frame. Resistant Flawless Cutting Accuracy Unique Design.
All Steel Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System
RAIL SYSTEM IS DONE WITH OPEN AND CLOSED MANUFACTURING BY REQUEST.
Our machine is with Slide Movement (Up Down) / Reducer
Our machine is with Slide Movement (Y axis) / Reducer
Our machine is WAGON Movement (X axis) / Manual
Our machine has 45 DEGREES cutting feature.
Machine Slide System is the Linear Guiding System Preferred for CNC Use.
Marble Side Cutting

You can cut marble slabs at 90° and 45° in X and Y directions with PLC controlled 3-axis movement capability. With the strong chassis structure due to NPU steel, you can obtain a smooth surface in cutting your granite slabs. Natural stone processing...
Longitudinal, transverse and 45 ° cutting machine,
X and Y axis cuts,
Cutting head and its table works fully automatic,
It has both manual and automatic double-page digital touchscreen management panel,
It can make automatic sizing in 10 different sizes,
Linear slide system is used for upper body movements,
Technical support is possible to the machine brain with internet connection,
Made of NPU 260 chassis.
Table height from floor: 90cm

High quality, durable and long life marble cutting machine will make your job easier by cutting marble, natural stone and granite platters with side cutting feature.
Our machines, which we produce with our experience in the marble and granite sector developed in Turkey, have effective and efficient designs. With the Schind 16400 marble, granite, stone cutting machine, you can speed up your production process thanks to this effective and efficient design. You save work and time with the possibility of longitudinal and 45° marble cutting.
The chassis of Schind 16400 marble, granite, stone cutting machine is produced with NPU 240 iron. Thus, you can obtain smooth parts without vibration during cutting.
You can shape your production as you want with two different sawing speed options.
Longitudinal cutting machine
45° cutting
It cuts only on X axis
Cutting head can't turn
It can be used manually
Made of NPU 240 chassis

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 680 mm
Çalışma Kalınlığı / Working Thickness 75 mm
Bant Motor Gücü / Band Engine Power 2 hp
Testere Motoru / Saw Engine 15 kw 3000 dev/dak (Rpm)
Testere Çapı / Saw Diameter 450 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 2 hp
Toplam Güç Tüketimi / Total Electricity Consumption 6,25 kw
Ebatlar / Dimensions 190 x 190 x 480 cm
Ağırlık / Weight 1500 kg
Kontrol Paneli / Control Panel PLC Otomasyon / Automation

High quality, durable and long life marble cutting machine will make your job easier by cutting marble, natural stone and granite platters with side cutting feature.
Our machines, which we produce with our experience in the marble and granite sector developed in Turkey, have effective and efficient designs. With the Schind 16400 marble, granite, stone cutting machine, you can speed up your production process thanks to this effective and efficient design. You save work and time with the possibility of longitudinal and 45° marble cutting.
The chassis of Schind 16400 marble, granite, stone cutting machine is produced with NPU 240 iron. Thus, you can obtain smooth parts without vibration during cutting.
You can shape your production as you want with two different sawing speed options.
Longitudinal cutting machine
45° cutting
It cuts only on X axis
Cutting head can't turn
It can be used manually
Made of NPU 240 chassis

* Cutting course 3400 mm.
* Saw Diameter 350-400- mm.
* Saw engine 7.5 / kv 1400/2800
* Wagon movement / Manual
* Wagon dimensions are 3000 x 1300 mm.
* Up and down motor 0.75 kv
* Reciprocating motor 0.75 kv
* Slide action / FORWARD BACK Liner Slide
* Steel Npu Chassis
* Machine length - 5500 mm.
* Machine width 2500 mm.
* Machine height 2000 mm.
* Approximate weight 2000 kg. - 2300 kg.
* Wagon manual
* Total Required Power 10 KW
* Required Water Flow 8 Lt./Min.
* 45 degree cut is with flywheel reductor
It is our Monoblock Machine mounted on a steel frame. Resistant Flawless Cutting Accuracy Unique Design.
All Steel Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System
RAIL SYSTEM IS DONE WITH OPEN AND CLOSED MANUFACTURING BY REQUEST.
Our machine is with Slide Movement (Up Down) / Reducer
Our machine is with Slide Movement (Y axis) / Reducer
Our machine is WAGON Movement (X axis) / Manual
Our machine has 45 DEGREES cutting feature.
Machine Slide System is the Linear Guiding System Preferred for CNC Use.
Marble Side Cutting