Tile Cutting Machine

This mechanical product is mainly used for stone splitting and stone stamping

The HD-1 type single axis cutting machine, with one pass, allows the longitudinal cutting of strips and tiles, trimmed after the polishing line; to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
allows the longitudinal cutting of strips and tiles, finding today application in various sectors and processing phases: to cut after the finished line to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
Technical characteristics:
It is built with a single shaft for diamond discs;
Ensures quick replacement of both the complete removable disk sleeve, which of each individual disk, thanks to the front opening and upper part of the structure and the particular construction of the spindle;
It is equipped with spacers between the disc and the disc to measure cuts to execute;
It has a support surface made of motorized thick rubber tape, with adjustable advance speed according to thickness and type of material to be cut;
It works by motor / spindle with belt transmission, with the possibility of speed variation; It guarantees a perfect longitudinal cutting precision by particular lateral guides of the conveyor belt;
It has the motor of the shaft of the disc holder positioned so that as much as possible protected from any waste from processing and melting of water, guaranteeing safety, durability and reliability;
It allows the raising and lowering of the spindle support bridge to adjust the depth of cut, to compensate the diameter of the wear of the diamond discs;
It is completed with a wide adjustable lateral material guide bar, equipped, in the insertion part, with clamps that hold the material adhered to the belt and pressed against the guide bar;
Gives the operator complete control of the controls (spindle support lock, disc depth adjustment, guide bar positioning).

The HD-2 type cutting machine with one pass allows the longitudinal cutting of strips and tiles, to make baseboards, mosaics and all kinds of stone bases. By having two axes it allows cutting high thicknesses.

Manual Table Cutting/milling Machine For Marble Slabs, Tiles

General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.

Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.

The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.

The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.

One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .

By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.

The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.

HEAD CUT SIZING MACHINE
Machine Dimensions (mm) 4000x2000x1500
Cutting head movement (mm) 800
Maximum Saw Size (mm) / 400
Saw Speed (rpm) 1400/2900
Saw Engine Power (kW) 9 kw Installed Power (kW) 1
Machine Weight (kg) 1800

Cutting machine multidisc HR-2
Ref. 8704
The HR-2 type cutting machine performs a single pass longitudinal cut to materials of different thicknesses and different sizes.
By having 2 axes it allows cutting high thicknesses.

This mechanical product is mainly used for stone mushroom cutting

TRM 600 Multi-Blade Cross-Cutter, Strip Cutting, Edge Trimming Machine

Parallel cutting multiheads HLS
Ref. 8601
HLS multi-head parallel machine has high precision and waste reduction.
Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing.
The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.

Parallel cutting with independent heads HR4
Ref. 8602
The Parallel cutting machine type HR4 is designed for the longitudinal cutting of a single pass of strips and tiles, this machine regulates the distance between the discs guaranteeing maximum flexibility in the change of measures.

Our cutting line N.2990/2200-6+9C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the
horizontal stacker and positioned waiting to enter the production line in such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 6 heads on mobile bridge N.8000-L-6C and the transversal cutter with 9 heads N.8000-T-9C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with
precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception Suction Cup, of particular design, is made up of a rectangular plate, capable of supporting
horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-6+9C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Longitudinal cutter with 6 Ø600 heads and mobile bridge, model N.8000-L-6C.
– 1 Transversal cutter with 9 Ø600 heads and mobile bridge, model N.8000-T-9C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS BRIDGE CUTTER N.8000-L-600-6C

Characteristic Specification
Machine width 4220mm
Raceway length 6000mm
Max separation between discs 1-6 2200mm (interior)
min separation between discs 1-2-3-4-5-6 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (6)
Total installed power 100 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS BRIDGE CUTTER N.8000-T-600-9C

Characteristic Specification
Machine width 5370mm
Raceway length 5500mm
Max separation between discs 1-9 3500mm (indoors)
min separation between discs 1-2-3-4-5-6-7-8-9 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (8)
Total installed power 150 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS OF CUTTING TABLES WITH BELT N.2304/2200

Characteristic Specification
table width 2960mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 11.5m/min
Drive motor power 3 hp
CHARACTERISTICS OF ROLLER TABLE WITH SELECTION STOPS N.2590/2200

Characteristic Specification
table width 2930mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2930mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 5m/min
Motor power after cross 2.5 hp
CHARACTERISTICS OF MOTORIZED BELT TABLES N.2426/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 2 hp
CHARACTERISTICS LOADING TROLLEY N.1289-V

Characteristic Specification
table dimensions 1880×3200mm
Frame dimensions 2560×1140mm
vacuum center 30 m3/h / 1.35 hp
Hydraulic power plant 4 hp
Carriage advance motor power 0.75 hp
Table motor power 0.50CV
speed scrolling cart 5m/min
speed displacement pins 7.5m/min
width max. worked 2200mm
CHARACTERISTICS ROBOT-MANIPULATOR N-3530

Characteristic Specification
Max load capacity 120 kg.
min format of work 300x300mm
vacuum center 100m3/h
Installed potency. 25 hp
cycle time min. 10” sec

General Characteristics
The SNM-CCE is a mono-block crosscutting machine with a single diamond blade that transforms slabs cut on the block-cutter into tiles of desired length.
The main structure is made of heavy-duty steel, and the disk is directly mounted on the motor.
A brushless AC motor with inverter powers the forward and return movements of the head.
When cutting the last few millimeters, the machine will automatically reduce its speed in order to guarantee a perfect edge.
Electric cables and tubes for tool cooling are supported by nylon cable holding chains.

Universal arm milling machine – sawing machine Mod. CF 250B: machine suitable for making lengthways cuts on marble and granite. The heavy structure consists of: galvanized base with runners for sliding bench for length of 5200 mm in oil bath and covered by painted sheet metal casing; cast iron bench (length 250 mm, width 750 mm, with shelves 1550 mm); manual bench sliding back-forth by way of rack and pinion coupling operated by handwheel; large cast iron disc holder spindle; up-down movement of motorized disc by way of reducer-electric motor coupling and worm screw; disc holder spindle manually tiltable from 0° to 60° to make angled cuts; reading of rotation angle on measure; manual lubrication, through oiling points, on screws, scrolls and sliding guides; machine complete with electrical system with suspended keyboard.
TECHNICAL DATA
maximum bench stroke 2500 mm
horizontal spindle movement 740 mm
vertical spindle movement 450 mm
spindle rotation 0-60°
spindle motor power 15 Hp, speed 1450 rpm
power of translation motor 0.25 kW
power of motor for upward and downward movement 0.75 kW
max. thickness of cut (marble-granite) 140 mm
max. dimensions of machinable slab 3000 x 1250 mm
max. disc diameter 500 mm
dimensions of bench with shelf 2500x1540 mm
length under bench 5240 mm
max. distance of disc to column 1050 mm
dimensions 5440x2165x(h)2180 mm
max. overall dimensions 6450 mm
net weight of machine 3300 Kg
OPTIONALS
stainless steel rail caps, disc cap and belt protection
stainless steel electrical panel
multiple greasing
table motor drive including inverter with option of manual use
numerical control to carry out automatic machining cycles with programmed cutting measurements and touchscreen profile design
inverter - 11KW/15Hp
inverter - 15KW/20Hp
motor - 15KW/20Hp
tiltable square device
installation, commissioning and training in Italy

Parallel cutting with two heads HFL-2
Ref. 8603
HFL linear cutting machines are for single pass strip and tile slitting with a manual positioning system.
They are designed to cut extremely hard materials (porphyry, slate) and have also found many applications in the marble and granite sector.

This mechanical product is mainly used for stone stamping

- The powerful Ausavina Stone Saw MODS1 features a 3HP motor and guided by dual linear bearings on induction hardened chrome bar (avoid rusting). MODS1 is suitable for construction sites as well as workshops. It is incorporated with wheels and rollers for effortless single-handed transport. MODS1 features an electric drive submersible water pump.
- Bolted down casted aluminum working tables.

Igloo stone splitting machines are strong, versatile and above all fast. They are outstanding for the speed with which they can produce large quantities of split stone.
Today they are used to split all types of stone. Their design makes them perfect to produce a variety of cobbles, sett pavings and wall stones. Igloo stone splitters maybe smaller than other Steinex machines but theyare strong and resilient.
They are extremely simple to operate and cope well the constant stresses associated with working hard stone for long periods, even when operating in the toughest conditions.
Each Igloo machine is equipped with a low noise hydraulic unit.

General Characteristics
The new SNIC Multiple Cross Cutter machines offer extraordinarily high performance and productivity to eliminate the old bottle-necks caused by spindle translation for strip cutting.
These cutting machines, which are structurally identical, process strips up to a width of 600 mm or 800 mm and thanks to their powerful 7.5 hp motors, they cut in a single passage thickness up to 70 mm on marble. The SNIC-MCC cuts strips up to 3000 mm long and can mount up to 7 spindles with manual or sequential positioning.
The cutting movement of the disks is ensured by a single bridge sliding on high accuracy runner blocks with electronically adjustable cutting speed.
The cutting cycle is completely automated, without the intervention of the operator:
The marble strip to be sawn advances on a conveyor belt sliding over the milled table of the machine and stops automatically against a reference limit switch
The milled table automatically goes up to lift the strip away from the conveyor belt
The aligner/pusher pistons align the strip and push it against the side of the milled table
The Bridge moves the disks to cut
The cut finished, the bridge moves back to initial position
The milled table goes down and the conveyor belt moves the cut strips automatically to a motorized rollers.

HPO-Bridge Cutter
Portable cutter
It allows cutting pieces in a very fast and easy way.
A steering wheel is manually used to make the table work. This table is provided with mechanical stops in order to guarantee the cut pieces facing.
Different models depending on the disk sizes and the needs of the kind of cut.

- Blade dimensions are Ø300 mm or Ø350 mm.
- Cutting length capacity is up to 133 7/8 inches (3400 mm)
- Easy to move on rail with roller system.
- Superior clamp system for increase accuracy.
- Water cooling system prevents damage to the blade and materials.
- Automatic overload power shut down

Bugnatrice
Bugnatrice 140 strokes/min and motor 2HP.
Length of the stroke 5-20cm and thickness 2-18cm.

This machine splits the tile into 2 parts. We put the tile in horizontal way on the belt, and we specify the thickness of horizontal split. We must regulate the thickness manually by moving the head of the disk up and down. It has 2 horizontal heads. The belt is controlled by an inverter.
Horizontal heads: 2
2 heads with 1 horizontal disk each: 625 mm
Cutting width: 200-420 mm
Cutting thickness: 13-80 mm
Splitting thickness 13-40 mm
2 motors for the disks of 625 mm (RPM:1420 rotation): 22.5 kw
One variable Gearbox for the belt: 0.75 kw
General power: 45.75 kw
Overall dimensions (LxWxH): 3200x1200x1800 mm

This mechanical product is mainly used for 4-blade stone splitting

Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.

The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c

Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c

Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200

Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp

Excalibur ® Lenght Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm., 2100 mm is current width of raw material, its physical structure is standardized in respect to these measurements.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.

This mechanical product is mainly used for cubes and stone slicing(manual)

TRANCIA SAGOME model SQUALO: cutting machine for the recovery of stone materials (different types of marble, stone or granite, no natural split), built in heavy structural steel with strong hydraulic piston. Two special plates, chosen from different shapes, are used to transform your waste slabs into valuable shapes for paving. The special features of this machine, besides its sturdiness and notable cutting power, are the versatility and durability of the shaping plates. Every machine is supplied with a plate of choice from our catalogue.

Excalibur ® Width Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm.,1250 mm., 2100 mm is current width of raw material,its physical structure is standardized in respect to these measurements. For raw materials with marginal measurements, the solution is provided by special design chassis frames.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology.. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.

This mechanical product is mainly used for cubes and stone slicing(automatic)

DAP UKRAINE/MOLDOVA:2215$
KSL-24S Splitting Machine With Tools

You can cut marble slabs at 90° and 45° in X and Y directions with PLC controlled 3-axis movement capability. With the strong chassis structure due to NPU steel, you can obtain a smooth surface in cutting your granite slabs. Natural stone processing...
Longitudinal, transverse and 45 ° cutting machine,
X and Y axis cuts,
Cutting head and its table works fully automatic,
It has both manual and automatic double-page digital touchscreen management panel,
It can make automatic sizing in 10 different sizes,
Linear slide system is used for upper body movements,
Technical support is possible to the machine brain with internet connection,
Made of NPU 260 chassis.
Table height from floor: 90cm

It takes a great deal of experience to make tiles from slab type stone. This is why the Broadway machines are designed to split wide and very thin materials , operating more slowly than other machines in the Steinex range.
Another notable difference that makes these splitters more suitable for this type of application is the pressure of the lower blade on the stone without the movement of the working table. This greatly improves split quality and reduces waste.
These machines are designed to split all types of stones and are particulary suitable for the production of slab paving and flat finished products. With their long blade large pieces of stone can be worked with precision.
Each machine is equipped with a low noise hydraulic unit.

- Ausavina Stone Saw TS1 has a casted aluminum working table guided by dual linear bearings on induction hardened chrome bars (avoid rusting).
- TS1 cuts accurately every time. Cutting angle ranges from 45 ~ 90 degrees.
- TS1 is now available with wheels for easy transportation.
- Powder-coated water pan provides additional strength while preventing rust and scratches.
- Includes a sturdy and lightweight steel stand.
- The submersible water pump provides a high output coolant for maximum protection to the diamond blades.
- Switch contains a thermal circuit breaker that protects against overload and short circuits.
- Features a specially designed table that supports larger size tiles.
- An adjustable stop guide is included.
- Built-in handles for easy transportation.

This mechanical product is mainly used for natural mosaic splitting(automatic)

Longitudinal, transverse and 45 ° cutting machine,
Cuts on X and Y axis,
The wagon forward and backward movement is automatic and is provided with joystick,
The rotation of the width, length and 45 cutting angles is done automatically from the control panel,
Cutting speed adjustable,
The shaft bearing which the wagon moves on is completely filled with oil and is closed,
The wooden wagon is used, the shaft bearing that drives the upper body is closed with bellows,
Made of NPU 240 chassis.

In marble industry, horizontal splitting machines are utilized in acquiring two separate pieces by horizontally cutting the strips which originally are obtained by block cutting machines. Horizontal splitting machines are designed to process marble strips of maximum 160 mm thickness and maximum 630 mm width, and may come in different designs depending on how many cutting disks the machine has.
In general; machines with 2, 4, 6 and 8 cutting disks are used for horizontal splitting processes. They are also known for improving the efficiency at tile production. In particular, they are employed to minimize errors that may ocur during block cutting and loading/unloading operations.

Base frame in painted iron and work bench in aluminium. Cutting head with manual sliding through use of a handle, on chrome-plated bars. The cutting head is adjusted vertically by means of a handwheel and can be tilted for 45° cutting. Submerged pump for disc cooling water. 1 side stop, 1 front stop, corner-shaped legs, and set of service wrenches.
OPTIONAL: Diamond cutting blade. Goniometer. Long goniometer. Side roller 50x100 cm.

SQA-600 Hand Swaying Edge Cutting Machine uses jointed structure; the main head can rotate 180 degree and electric up and down.The whole machine has compact structure, fine appearance, stable functions and high processing precision, which suit for edge cutting and milling of small slates, lath and thick ties.

HEAD CUT SIZING MACHINE
Machine Dimensions (mm) 4000x2000x1500
Cutting head movement (mm) 800
Maximum Saw Size (mm) / 400
Saw Speed (rpm) 1400/2900
Saw Engine Power (kW) 9 kw Installed Power (kW) 1
Machine Weight (kg) 1800

Longitudinal cutting machines, very sturdy and reliable that can cut strips wide up to 50 mm (60 RAF). These longitudinal cutting machines are available in manual or sequential versions. Spindles fitted are 1 to 3 and can cut thickness up to 40 mm for granite and 60 mm for marble in a single pass.

Powerful 45kw 60 Hp main motor
Man motor with inverter
Belt motor with inverter
Return conveyor optional