If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesStone Tile Cutting MachinesLimestone Tile Cutting Machines
Limestone Tile Cutting Machines in Italy
( 76 )After the large stone blocks are cut into 2 or 3 cm wide sheets, they need to be cut into various sizes according to your project. Sometimes these sizes are standard, sometimes they just need to be cut to the sizes your project requires. Cutting Natural Stone slabs to desired sizes is not easy to standard and requires high-tech machinery to do it accurately. It is easy to find stone tile cutting machines of all models and prices related to these works in the Stonecontact.com global stone portal. Stonecontact.com website has all kinds of brands and models of stone tile cutting, chamfering, polishing machines. Therefore, if you need a new stone tile cutting machine, it is inevitable that you will encounter many options. There are CNC machining centers, wire saws and many more type machines for cutting, shaping, edge profiling and grinding stone.
More Hide
Categories:
Single Disc Cutting Machine (7)
Strip Cutting,Edge Trimming Machine (11)
Multi-Blade Cross-Cutter,Trimming (15)
Hydraulic Stone Splitting Machine (16)
Mitre Saw, Edge Cutting Machine (27)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine to divide strips of marble with a width of mm. 300 to 630 and thickness from 20 to 100 mm. Consisting of 6 spindles in parallel position, mounted on two beams connected to each other so as to allow the six spindles to be adjusted in a vertical position, at the same time as the cutting thickness changes. In addition, each spindle is individually adjustable in vertical and transverse position, displayed by a centesimal comparator. Motor power HP. 25 + 25 + 25 + 25 + 30 + 30 + 1. Disks applicable for cutting width 630 mm. : n ° 2 Ø 625/725/850 mm .. Complete with electrical equipment and accessories for use. Machine with disc protections, picker and guides in stainless steel.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The cutting machine is made of press-formed steel of suitable dimensions and thickness to guarantee a longer life. The hydraulic system is made of Bosch materials. The electrical system is made with materials of the best brands.
Safety guards for CEE countries included.
TECHNICAL FEATURES
HP 10 disk drive - Apllicable disc diameter 400 mm - HP 1.5 hydraulic power unit motor - Useful cut in width 610 mm - Useful cutting height 80 mm
HEIGHT 1900 mm - DEPTH 1500 mm - WIDTH 3520 mm
CO.MEC. TRANI SLR
Italy
CO.MEC. TRANI SLR
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
The stone bench saws ITC are ideal for the construction sector. Rugged and portable for use on any jobsite. Professional wet saws with structure in iron; solid, precise and versatile they can be adapted to the cutting of all types of material (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 and Ø400 mm. Available in single-phase or three-phase version.
Stone saws equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap.
Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: instruction manual, set of wrenches, side stop.
OPTIONALS: high-resistance chrome-plated bars, multilayer marine plywood (phenolic) work surface, diamond blades, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, goniometer fence, lateral fence, machine with a structure for blades of Ø450 Ø500 mm, precision laser, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
Machinery Function Features:
SPLITTING PRECISION
Broadway machines, specialist stone splitters for the production of split tiles and cladding stone products.
These machines are used to split granite, limestone, sandstone, slate, porphyry and many other types of natural stones.
BROADWAY SERIES 800, 1000, 1250, 1280 TILE & SLAB SPLITTER
It takes a great deal of experience to make tiles from slabs or natural flat face stone. This is why the Broadway machines are designed to split wide and very thin materials, with a specialist internal moving frame, giving a precision split edge each time.
Another notable difference that makes these splitters more suitable for this type of application is the pressure of the lower blade on the stone without the movement of the working table. This greatly improves split quality and reduces waste.
These machines are designed to split all types of stones and are particularly suitable for the production of slab paving and flat finished products. With their long blade large pieces of stone can be worked with precision.
BROADWAY SHERPA 600 2C SEMI- AUTOMATIC STONE SPLITTING LINE
Steinex semi-automatic Splitting line designed for natural stone with a sawn surface for splitting products of small to medium dimensions. This line is equipped with 2 splitting cylinders, lower and upper, to maximize the quality of the split.
The blade length is 600 mm with a maximum split height of 320 mm and the machine is supplied with a high performance, low maintenance hydraulic unit and once again Steinex continues offering incredible efficiency, with the line using approximately a maximum of 5kW of power.
BROADWAY 600
The Broadway 600 splitting machine is the smallest Broadway model, designed to be portable and as a general-purpose machine for the production of most split products from regular or sawn stone and concrete. It is also considered a specialist machine for the production of cladding and wall stones from slabs or sawn blocks. The blade is 600 mm long and fixed but pivoting, an excellent combination for splitting natural flat material or sawn stone. Each machine is equipped with a low noise hydraulic unit.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Heavy-duty frame and the teeth with mechanical adjustment make the PX machines ideal for splitting every kind of stone. They can be considered like primary splitters for feeding of complete splitting lines, or even like complete independent working equipment, depending on the finish product you need to get. For this reason, PX machinery may be installed even directly in the quarry for on-site processing of sawn blocks, natural quarry layers or irregular stones with easiness. The bottom blade is fixed, and the working table is mobile, that drops down at the moment of splitting in order to accommodate the correct way of processing.
MEC
Italy
MEC s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
€10500-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Q.ty 3 Technoplit splitting machine, model TS 32/28, 50ton, 50cm h25, 2003
10.500,00 € repaint+complete refurnished
9000,00 € only set up to work
Stone Expert S.r.l.
Italy
Stone Expert S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
BREAKER S.r.l.
Italy
BREAKER S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
Bridge saw machine, ideal for wet cuts on marble stone slabs and tiles.
GHELFI SRL
Italy
GHELFI SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
Machinery Function Features:
* Maximum attention at customer’s satisfaction
* Customized and to our target functional machines
* Whole flexibility for possible new requests and adaptations
* High quality and certifications of offered products
* Continuous advice
* Prompt technical assistance worldwide
MEC srl
Italy
MEC srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Sandstone
Machinery Function Features:
Cutters Machines for wet-cutting marble, granite, cement and building materials
Cutting dimensions: 40-150cm
AbrasMarmi s.a.s.
Italy
AbrasMarmi s.a.s.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
€15000-19000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Hydrotek srls
Italy
Hydrotek srls
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing strips of marble with a width from 150 to 460 mm into two parts. and a thickness from 20 to 100 mm.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The stone bench saws ITC AL are ideal for the construction sector and for everyone who needs to move their machinery often. Professional wet saw, very light and resistant to corrosive processes, thanks to their structure in aluminium. Solid, precise and versatile they are adaptable to cutting all materials (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 Ø400 mm. Available in single-phase or three-phase version.
Stone bench saws equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in aluminium, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: goniometer fence, instruction manual, set of wrenches.
OPTIONALS: multilayer marine plywood (phenolic) work surface, diamond blades, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, lateral fence, machine with structure for blades of Ø450 Ø500 mm, precision laser, side stop, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
€20000-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Manual table cutting/milling machine type: “A 500”
Machine complete With:
- Sliding worktable with length 250 cms. manually actioned.
- Max cutting length 300 cm
- Length of under table 500 cm
- Spindle motor HP 10
- Max diameter diamond disk ? 500 mm.
- Manual spindle lifting/lowering of 30 cm
- Manual spindle traverse of 75 cm
- Manual tilting spindlE 0-90°
- CE Electric and water plant.
- Operation and control devices.
- Worktable, spindle and column, cast-iron made totally.
MORDENTI
Italy
MORDENTI EXPORT S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Igloo stone splitter is an open frame machine model, highly productive, simple to maintain, an ideal solution for your quarries and the best choice as cubes splitting machine. Splitting machine models range from 160-640mm in blade length and 20 -180 tons of splitting pressure. All models are supplied with a highly efficient hydraulic unit using only the best performing hydraulic components. The Igloo machines are designed for splitting hard material in continuous use and are well known throughout the world for their resilience and precision processing hard stone. These machines are used to split granite, limestone, sandstone, slate, porphyry and many other types of natural stone products.
The Igloo 160, 240 and 320 models are used for the production of split paving, cubes and natural stone tiles. The Igloo 400, 480 and 640 for wall stones and large cubes, whilst the Igloo 500 and 600 for split kerbstone, large wall stones and as primary machines in a configured splitting line for the production of various split natural stone products.
High production, low cost stone cobble splitting machine. Our Igloo stone splitters come with various options including conveyors, feeders, hoppers and manipulators to both improve productivity and optimize safety. All Igloo splitters can be configured in Steinex production lines as primary or secondary splitters depending on the model and desired final product.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Technosplit 220 Ton multitooth complete line (machine+hopper+conveyour belt+accesories)
Model TS 100/140X40
Stone Expert S.r.l.
Italy
Stone Expert S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
C RANGE stone splitting machines
The C RANGE stone splitting machines combine perfectly with our entire conveyor belt range. Loading material onto the conveyor belt not only makes the job easier and renders the operator more autonomous , but also assists the operator in maintaining the correct working posture. The conveyor belt controls are positioned for easy access on the stone splitting machine
Splitting heights: from 170 mm to 650 mm
Length of blades: from 160 mm to 840 mm
Splitting force: from 24 tons to 200 tons
So called due to it's shape ( or "swan-necked") , these machines are manufactured with a special open frame structure whereby the operator, positioned at the front, can work directly on the stone to be split.
MEC
Italy
MEC s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
CONSTRUCTION OF VAULTS, ARCHWAY AND CORNICES MACHINES
The machine has 3 settings, detailed as follows:
1) the first setting is provided with milling helical cutter with a diameter up to 5-6 mm, tilt in degrees, for the realization of the ribs of ashlars and, providing proper knives, for the realization of the frames;
2) the second setting is provided with diamond blade tiltable with 800 mm diameter for the cutting of the blocks in degrees;
3) the third setting is provided with helical cutter of 800 mm tiltable for the camber of ashlars use closing time.
Officine Carlino Fernando
Italy
Officine Carlino Fernando
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing strips of marble into two parts having a width of mm. 50 to 200. Consisting of 4 motors-spindles in parallel position, so as to obtain an adjustment of the four motors-spindles in a vertical position at the same time when the cutting thickness is changed.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC 3000 AAS-T with motorized advancement of the cutting head (with inverter for regulation of advancement speed). Toothed belt transmission.
The single beam system, constituted by structural square aluminium profile, makes this saw very tough and precise. 4 detachable legs equipped with adjustable feet. Devised and designed for marble workshop and big stone industries.
Perfect for cutting natural stone, marble, granite, Grès porcelain stoneware, etc. Inclination of the bridge from 90° to 45° by means of a handwheel placed in the right side of the machine base.
The cutting head, both at 90° and 45°, is perfectly in line with the middle of the machine; this feature allows to have a big surface for leaning slabs.
Adjustment of cutting depth is by means of a flywheel above the motor unit.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp. Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling.
The self-supporting tank, in sheet metal, has an extra support frame and it’s completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending.
Its emptying is made by opening the draining cap.
The tank has some hooks for using 8 side roller tables, 4 front and 4 rear, which aim is to facilitate the slabs movement and giving greater stability to the machinery.
Each side roller table has 4 legs with adjustable feet.
ACCESSORIES SUPPLIED: electrical switchboard, 3 extension side roller tables 150×50 cm, instruction manual, lateral fence, precision laser, set of wrenches, side stop.
OPTIONALS: diamond blades, goniometer fence, motor for adjustment of cutting depth, speed reducer for the cutting motor, supplementary side table with rollers 100×50 cm / 150×50 cm / 200×50 cm. Grinding wheels for half-bullnose edge
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Manual cutting/milling machine
Worktable and undertable:
Seasoned cast iron made with inner stiffening ribs to grant maximum rigidity. Cast iron supports are assembled on the worktable and are provided with wheels sliding on protected ground ways. The cast iron ways are supplied with steel guard to avoid water and mud infiltration.
Worktable control:
Manually: by cast iron handwheel located at table and to make work easier and for a full use of table lenght.
The table slides thanks to proper racks avoiding the table slipping and permitting full motor power.
The rack is well protected by suitable guards. One hand lever brake of simple use can lock the table at any position. Automatic: By hydraulic cylinder with adjustable working speed device (HP 3 motor) from control board.
Spindle:
Located on machine beam, is cast iron made to guarantee best diamond disc/wheel performances, Its rational frame allows easy manual tilting operation for inclined cuts.
The spindle shaft is housed in rotating group and turns on proper bearings eliminating any vibration. The coupling between shaft and motor is performed by "V" belts.
Column and arm:
Cast iron made single pieces to grant max, stoutness.
Column control:
Manually: By hand winch actioning screw and bronze lead nut.
Motorized: By 1,5 HP motor that can be operated from control board.
Arm control:
Manually: By hand winch actioning screw and bronze lead nut.
Motorized: By 0,5 HP motor that can be operated from control board.The automatic type will be supplied with separate electric box, movable pendant control board at low electric tension and hydraulic central unit.
MORDENTI S.R.L.
Italy
MORDENTI S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing reinforced panels with a max. Width into two parts. of 1,300 mm. and a thickness of 20/100 mm. Electro-welded steel structure with cast iron columns and beams on which 2 spindles are applied in parallel position carrying 2 discs Ø 725 mm. plus supporting structure diamond wire Ø 7.2 mm. with n ° 2 flywheels Ø 1.000 mm. driven by a motor managed by an inverter to obtain an optimal peripheral speed of the diamond wire, confirming the type of material that will be cut; plus respective guide wheels and wire adjustment. Equipped with interchangeable belt sliding surfaces at the time of wear. Motor power HP. 25 + 25 + 15 + 1. The advancement of the conveyor belt is managed by a geared motor controlled by an inverter which allows a feed from 0 to 1,000 mm. which can be adjusted to the optimum speed, according to the material to be cut. Machine with disc protections, diamond wire, picker and guides in stainless steel.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone
Machinery Function Features:
The Menhir machines are our most powerful splitting Steinex machines, splitting very large stones with great accuracy. These splitting machines have been installed in countries all over the world and have become a fundamental machine in the quarries and stone processing facilities of many of our customers
Machinery in the Menhir range is mainly used as a primary machine in a splitting line producing semi-finished split stone or as a machine producing final products such as large kerb stones and large wall stones.
Menhir machines are used to split granite, limestone, sandstone, slate, porphyry and many other types of natural stone. Blades range from lengths 1000 mm to 1600 mm with splitting pressure from 220 ton to 640 ton depending on the customer’s product requirements and the properties of the stone being split
These resilient machines are used to split both raw material and sawn slabs. The non-sawn stone includes stone quarried in blocks or very irregular natural stone quarried using explosives. The Menhir machines are equipped with high levels of adaption in the blade system and designed with a pivoting blade head to make splitting such irregular material efficient, giving a high quality split surface finish and leaving minimal waste. Each machine is equipped with a highly efficient low noise hydraulic and power unit. The hydraulic unit comes with a several pump configuration options, including the possibility to adjust the speed at which the machine blade begins to apply pressure to the stone and the desired eventual” ramp” or split pressure plan the follows. Being able to set these splitting parameters on the Menhir splitting machine allows our customers to optimize the quality of the split face according to the properties of their stone.
The Menhir splitting machines come with an extensive range of options including conveyors, block loaders, manipulators, remote control consoles and several different hydraulic configurations depending on the customers requirements.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Radial sawing machine for marble, granite and stone.
Robust, accurate, versatile and economical. Extremely accurate with head sliding bymeans of linear ball bearings on two chrome-plated and ground bars.
It is equipped with a submersed pump inside the base for disc cooling water regeneration. Vertical motion of the head by means of handwheel for stable and fast control.
Inclinable head for 45° cuts.
ACCESSORIES:
1 Stop
Transport handles
Set of wrenches
Baicchi Abrasivi
Italy
Baicchi Abrasivi Innovation S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone
Machinery Function Features:
Wind Star is the Steinex range of splitting machinery used in automatic splitting lines for splitting sawn stone and concrete.
In addition to the traditional upper and lower blades, Wind Star splitting machines are equipped with lateral or side blades. This four-blade system permits splitting pressure to be exerted to all four principal stone faces resulting in a straighter split or profile
With certain types of stone, using this technology it is possible to produce very thin cladding and tiles with a straight profile not normally achievable with traditional upper and lower blade systems
Additionally, Wind Star machines have a special internal frame, raising the lower blade so it makes direct contact with the bottom stone surface and is not impeded by any part of the machinery, optimizing the accuracy of the split.
The Wind Star splitting machinery range covers a wide range of applications including cladding, tiles and split paving. Wind Star models range from a blade length of 300 mm up to 2800 mm and a starting splitting force at 20 tons and going up to over 600 tons
Wind Star splitting machines are often configured in an automatic line. The nature of the input material (sawn blocks, slabs and concrete) lends itself well to being split in an automatic line, offering real improvements in production capacity, product quality and operational costs. Automation options for splitting stone are vast and include conveyors, pushers, pneumatic deviators, product counters, and numerous other additional components and machinery to optimize material handling and production of the split cycle.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Marble bench saw ITC AV/AA with toothed belt-drive transmission system. Perfect for both building sites and for small-medium marble-works. Ideal for cutting brickworks, natural stones and stone-like materials, bricks, marbles, granites and Grès porcelain stone-wares. A solid and precise wet saw, available with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine) – model “AV” – or motorized (with inverter for regulating the speed of advancement) – model “AA”. Unlike the basic versions (ITC – ITC AL – ITC ST) the operator remains stationary, without having to move with the head during cutting.
The head runs on chrome-plated guides straightened by means of linear recirculating bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø300 Ø350 Ø400 and Ø450 mm. Available in single-phase or three-phase version.
Sawing-machine equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap.
Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: raised structure for using blade of Ø450 o Ø500 mm, multilayer marine plywood (phenolic) work surface, diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, motor for adjusting depth of cut (on versions AA and AA-T), precision laser, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
Bridge saw machine, ideal for cutting construction materials and natural stones.
GHELFI SRL
Italy
GHELFI SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AVS with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine). The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting slabs of natural stone, marble, granite and Grès porcelain stoneware, but also for bricks and brickwork. Toothed belt transmission means that the operator can remain stationary without having to move with the cutting head.
Manual inclination of the bridge from 90° to 0° by means of a simple lever or reduction gear – for those who wish greater precision during the operation of setting the degrees. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, precision laser, reducer for degrees regulating, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AAS with motorized advancement of the cutting head (with inverter for regulation of advancement speed). Toothed belt transmission. The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting natural stone, marble, granite, Grès porcelain stoneware, bricks and brickwork. Inclination of the bridge from 90° to 0° by means of reduction gear (on the right hand side of the machine). The innovative system of inclination at 0° means that you can also work in the horizontal, making it possible to use a drilling kit. This accessory allows the operator to realize boring holes (maximum 80 mm) in paving tiles, marble and granite. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: electrical switchboard, extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: raised structure for using blade of Ø450 o Ø500 mm, diamond blades, drilling kit, extension side table in sheet metal 55×45 cm, goniometer fence, motor for adjustment of cutting depth, precision laser, speed reducer of the cutting motor, supplementary side table with rollers 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor. Grinding wheels for half-bullnose edge
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
€7500-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Electrically operated machine used for the rustication (bugnatura) of any stone type.Due to the machine's solid and robust structure and ease of operation, this model is perfectly suited to the constant and intense use associated with working hard material and is suitable for any type of stone.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MRF is the new automatic trimmer for cutting in a single movement marble, granite, natural stone and ceramic.
The trimming machine is composed of a conveyor belt and two discs with adjustable trimming sizes, in width and in height, by a manual handwheel.
To optimize cutting, according to the thickness and type of material to be processed, the speed of the conveyor belt can be adjusted through the variator.
The MRF is also equipped with a lateral guidance system and upper pressure that allows you to guide the material in the cutting phase, ensuring quality production, low operating costs with minimal space and the use of unskilled personnel, thanks to the ease of use.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The ITC ST is top of the range stone bench saws for construction sector. Their structure in stainless steel ensures maximum resistance to corrosive processes and atmospheric agent. Long lasting wet saws, very solid and precise; they are suitable for cutting all types of material (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 Ø400 mm. Available in single-phase or three-phase version.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in stainless steel, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: instruction manual, set of wrenches, side stop.
OPTIONALS: multilayer marine plywood (phenolic) work surface, diamond blade, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, goniometer fence, lateral fence, machine with structure for blades of Ø450 Ø500 mm, precision laser, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Manual Table Cutting/milling Machine For Marble Slabs, Tiles
MORDENTI S.R.L.
Italy
MORDENTI S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Universal arm milling machine – sawing machine Mod. CF 250B: machine suitable for making lengthways cuts on marble and granite. The heavy structure consists of: galvanized base with runners for sliding bench for length of 5200 mm in oil bath and covered by painted sheet metal casing; cast iron bench (length 250 mm, width 750 mm, with shelves 1550 mm); manual bench sliding back-forth by way of rack and pinion coupling operated by handwheel; large cast iron disc holder spindle; up-down movement of motorized disc by way of reducer-electric motor coupling and worm screw; disc holder spindle manually tiltable from 0° to 60° to make angled cuts; reading of rotation angle on measure; manual lubrication, through oiling points, on screws, scrolls and sliding guides; machine complete with electrical system with suspended keyboard.
TECHNICAL DATA
maximum bench stroke 2500 mm
horizontal spindle movement 740 mm
vertical spindle movement 450 mm
spindle rotation 0-60°
spindle motor power 15 Hp, speed 1450 rpm
power of translation motor 0.25 kW
power of motor for upward and downward movement 0.75 kW
max. thickness of cut (marble-granite) 140 mm
max. dimensions of machinable slab 3000 x 1250 mm
max. disc diameter 500 mm
dimensions of bench with shelf 2500x1540 mm
length under bench 5240 mm
max. distance of disc to column 1050 mm
dimensions 5440x2165x(h)2180 mm
max. overall dimensions 6450 mm
net weight of machine 3300 Kg
OPTIONALS
stainless steel rail caps, disc cap and belt protection
stainless steel electrical panel
multiple greasing
table motor drive including inverter with option of manual use
numerical control to carry out automatic machining cycles with programmed cutting measurements and touchscreen profile design
inverter - 11KW/15Hp
inverter - 15KW/20Hp
motor - 15KW/20Hp
tiltable square device
installation, commissioning and training in Italy
Campagnola e Fedeli Srl
Italy
Campagnola e Fedeli Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Igloo stone splitting machines are strong, versatile and above all fast. They are outstanding for the speed with which they can produce large quantities of split stone.
Today they are used to split all types of stone. Their design makes them perfect to produce a variety of cobbles, sett pavings and wall stones. Igloo stone splitters maybe smaller than other Steinex machines but theyare strong and resilient.
They are extremely simple to operate and cope well the constant stresses associated with working hard stone for long periods, even when operating in the toughest conditions.
Each Igloo machine is equipped with a low noise hydraulic unit.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
TRANCIA SAGOME model SQUALO: cutting machine for the recovery of stone materials (different types of marble, stone or granite, no natural split), built in heavy structural steel with strong hydraulic piston. Two special plates, chosen from different shapes, are used to transform your waste slabs into valuable shapes for paving. The special features of this machine, besides its sturdiness and notable cutting power, are the versatility and durability of the shaping plates. Every machine is supplied with a plate of choice from our catalogue.
Campagnola e Fedeli Srl
Italy
Campagnola e Fedeli Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
It takes a great deal of experience to make tiles from slab type stone. This is why the Broadway machines are designed to split wide and very thin materials , operating more slowly than other machines in the Steinex range.
Another notable difference that makes these splitters more suitable for this type of application is the pressure of the lower blade on the stone without the movement of the working table. This greatly improves split quality and reduces waste.
These machines are designed to split all types of stones and are particulary suitable for the production of slab paving and flat finished products. With their long blade large pieces of stone can be worked with precision.
Each machine is equipped with a low noise hydraulic unit.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Base frame in painted iron and work bench in aluminium. Cutting head with manual sliding through use of a handle, on chrome-plated bars. The cutting head is adjusted vertically by means of a handwheel and can be tilted for 45° cutting. Submerged pump for disc cooling water. 1 side stop, 1 front stop, corner-shaped legs, and set of service wrenches.
OPTIONAL: Diamond cutting blade. Goniometer. Long goniometer. Side roller 50x100 cm.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
CROSS CUTTER M/C FOR MARBLE, CONCRETE, CERAMIC, GRANITE
CEAM S.r.l.
Italy
CEAM S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AVS with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine). The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting slabs of natural stone, marble, granite and Grès porcelain stoneware, but also for bricks and brickwork. Toothed belt transmission means that the operator can remain stationary without having to move with the cutting head.
Manual inclination of the bridge from 90° to 0° by means of a simple lever or reduction gear – for those who wish greater precision during the operation of setting the degrees. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, precision laser, reducer for degrees regulating, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
€15000-19000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Hydrotek srls
Italy
Hydrotek srls
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Radial sawing machine for marble, granite and stone.
Robust, accurate, versatile and economical. Extremely accurate with head sliding bymeans of linear ball bearings on two chrome-plated and ground bars.
It is equipped with a submersed pump inside the base for disc cooling water regeneration. Vertical motion of the head by means of handwheel for stable and fast control.
Inclinable head for 45° cuts.
ACCESSORIES:
1 Stop
Transport handles
Set of wrenches
Baicchi Abrasivi
Italy
Baicchi Abrasivi Innovation S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing reinforced panels with a max. Width into two parts. of 1,300 mm. and a thickness of 20/100 mm. Electro-welded steel structure with cast iron columns and beams on which 2 spindles are applied in parallel position carrying 2 discs Ø 725 mm. plus supporting structure diamond wire Ø 7.2 mm. with n ° 2 flywheels Ø 1.000 mm. driven by a motor managed by an inverter to obtain an optimal peripheral speed of the diamond wire, confirming the type of material that will be cut; plus respective guide wheels and wire adjustment. Equipped with interchangeable belt sliding surfaces at the time of wear. Motor power HP. 25 + 25 + 15 + 1. The advancement of the conveyor belt is managed by a geared motor controlled by an inverter which allows a feed from 0 to 1,000 mm. which can be adjusted to the optimum speed, according to the material to be cut. Machine with disc protections, diamond wire, picker and guides in stainless steel.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw ITC AVS with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine). The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting slabs of natural stone, marble, granite and Grès porcelain stoneware, but also for bricks and brickwork. Toothed belt transmission means that the operator can remain stationary without having to move with the cutting head.
Manual inclination of the bridge from 90° to 0° by means of a simple lever or reduction gear – for those who wish greater precision during the operation of setting the degrees. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: diamond blades, extension side table in sheet metal 55×45 cm, goniometer fence, precision laser, reducer for degrees regulating, supplementary extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
Have a Question? Ask our expert
Ask now
Questions & Answers on Limestone Tile Cutting Machines in Italy
Can I cut stone with a table saw?
Posted by Visitor
Reply to this question
Post ReplyCancel
You can use a table saw to cut stone if the saw has a diamond blade that is kept continually wet while cutting. A regular table saw blade will not create a smooth cut. The blade will chip the stone and will also produce a large amount of dangerous silica dust. A table saw is great for everyday projects.
Answered by StoneContact
Like
How can natural stone be cut with a tile saw?
Posted by Visitor
Reply to this question
Post ReplyCancel
Wet your stone in a bowl or bucket of water to prevent an initial dry cut. Place the stone on the opposite end of the tile saw from yourself. Pull the stone gently towards you, using the saw blade to cut down your marked line. Allow the saw blade to cut the rock, rather than putting a lot of pressure on it.
Answered by StoneContact
Like
