Stone Handling, Loading Machines in Germany

Overhead handling – for loads weighing up to 16 tonnes
Our EKDE suspension cranes are mainly characterized by high torsional rigidity thanks to their welded box-section design. The cranes run on tracks that are simply attached to the existing roof structure – columns to support the crane runway are not needed. This design saves time and money. And it saves space, leaving your entire workshop area available for production. Further benefits?
Computer-optimized box-section profile used for the crane girder for optimum load distribution
Specific sections of the workshop can be served
Lateral overhangs to extend the cross-travel path beyond the runway span
Loads can be handled immediately adjacent to the building wall by means of girder ends tailored to your application requirements
Engineering tolerances for minimum wear

Max dynamic moment [daNm]
Momento Massimo Dinamico 1154
Version Qmax
Max capacity [kg] A1 860
Portata Massima [kg] A2 800
Version STD
Crane weight [kg] A1 145
Peso della gru [kg] A2 175
Max force on the standard stabilizer leg
Massima reazione sul cilindro stabilizzatore
888 DaN
1314 DaN
Max standard stabilizer pressure on the ground (D=110mm)
Massima pressione appoggio sul terreno (D=150mm)
9.3 daN/cm2
7.4 daN/cm2
Max working pressure
Massima pressione di lavoro 180 bar
Max oil flow to main relief valve
Massima portata di olio al distributore 5 dm3
/min
Oil tank capacity
Capacità del serbatoio dell’Olio 17.5 dm3
Slewing moment
Coppia di Rotazione 170 daNm
Slewing angle
Angolo di rotazione 328°
Absorbed power
Potenza assorbita
1.5 kW
2 HP
Design standard
Normative di progettazione
DIN 15018
EN 12999

Large lifting heights for small spans
ZPKE double-girder overhead traveling cranes are the cost-effective entry-level models for Demag indoor cranes. ZPKE profile-section girders impress by virtue of their high degree of efficiency and offer an alternative to box-section girders – especially for small spans. The lifting height is high however – because the load hook can be raised between the two crane girders. The use of rolled steel sections as crane girders and specially developed rope hoist trolleys create an economically attractive overall package for double-girder overhead traveling cranes.
Further strengths of ZPKE
High long and cross-travel speeds thanks to high-performance double-girder design
End carriages of optimized design to suit the structure
Minimum approach dimensions thanks to compact trolley design
Crane control to meet application requirements: by radio control, pendant controller
Low-sway travel motions for smooth handling and exact positioning of loads thanks to optional frequency-inverter control
Crane components offering high operating safety and reliability

Ferrari Crane 317 Mobile Crane

With our DC-Pro chain hoist, we meet our own high standards in terms of quality and innovation.The DC-Pro chain hoist is a fully featured, highly versatile chain hoist, which can be installed and put into service in minimum time. Many features that have to be ordered and bought as extras elsewhere are already integrated as standard. The result:
"all inclusive" features at no extra cost
two lifting speeds as standard
improved safety thanks to 24 V contactor control, operating limit switches and elapsed operating time counter as standard
slipping clutch with automatic cut-out by means of speed monitoring
optimum ergonomics and ease of service
main components are maintenance-free for up to 10 years.

Ferrari Crane 322
TECHNICAL DATA
DATI TECNICI
Max dynamic moment [daNm]
Momento Massimo Dinamico 2405
Version Qmax
Max capacity [kg] A1 1590
Portata Massima [kg] A2 1485
A3 1270
Version STD
Crane weight [kg] A1 216
Peso della gru [kg] A2 243
A3 265

Starting and stopping with maximum performance
Simple, robust and reliable – these are the key characteristics of our KB conical-rotor brake motors. Their unique brake operating principle eliminates the need for separate control or additional switching elements. This is due to the mechanical connection between the brake and rotor. The result:
particularly high braking performance
approval for operation with extremely high switching frequencies
two-speed pole-changing motors
drives for starting-and-stopping applications and for direct line-fed travel motions
resistance to temporary overload
KB motors can be connected to gearboxes via a coupling.

Roboman "Spider III"
Universal tracked vehicle with strong Ferrari crane series 300. For different categorys like lifting a gravestone at cemetery.
self-propelled Hinowa crawler track with Ferrari crena Typ 350 A4
perfect staility because of own-weight
adjustable speed
turning circle on the spot
high tractive output
mobile platform
track width hydraulic adjustable
turning circle on the spot
speed: 2,3 km/h
lenght landing gear: 1220 mm
distance of spindle: 930 mm
width: 180 mm
climbing ability 20°

Demag D3 radio control: our goal – the best of its class
The safety and efficiency of a manually controlled crane is largely influenced by control equipment.
Radio controls offer freedom of movement and improved safety. As the control system for Demag V-type cranes, the latest generation of the DRC range of equipment, the DRC D3 radio control system, provides important features. The hand-held transmitters as well as the receivers meet the requirements of the future EN 300 328 V 1.8.1 radio standard.
Very long battery life
The battery integrated in the hand-held transmitter can be fully charged within just 2.5 hours and can be used for uninterrupted operation for up to 5 days.
Rapid change between transmitters
Up to three transmitters can be logged onto a crane and control can be switched between them at the press of a button, without hampering operating processes. In this way, individual cranes can be simply handed over from one worker to another. Control can be switched between transmitters within seconds.

Speed limit function
The crane operating speed can be set to 30, 50 or 70% of the maximum speed.
Transmitter density and co-existence
The highly reliable and robust radio transmission method is resistant to interference and allows up to 40 radio systems to be operated close to each other. The adaptive radio transmission method automatically checks whether a given transmission channel is available or already in use by another device. They can co-exist with other systems operating in the same frequency range in their immediate vicinity.
Better transparency
The hand-held transmitters are equipped with a monochrome display to indicate the payload and a vibration alarm to warn against overloads.
Improved safety and reliability
With a range of up to one hundred metres, the system enables the operator to control an installation at a safe distance without having to enter any potentially hazardous areas.
Basic equipment
DRC-10 D3 hand-held transmitters are available in two variants: stepless and 2-stage
A silicone case with a receiver (DRC DR D3), an aerial (DR 3 20 2400 MHz D3) and a plug-in charger

The DRC-DC radio control system is the ideal solution for optimum ergonomic operation of high-performance DC chain hoists. It offers much greater flexibility than cable-connected control systems and ensures that the operator can maintain a safe distance from the load at all times.
Two sizes to control up to two (DRC-DC 6) or three axes (DRC-DC 10), respectively
Strong, tough hand-held transmitter
Reliable radio transmission thanks to frequency hopping
Ergonomic design
Fast installation and simple operation
Outstanding performance
Reliable operation thanks to tough, impact-resistant hand-held transmitters
Highly reliable transmission thanks to frequency hopping
Display section for operating statuses and battery capacity
High availability ensured by high-speed charging of the transmitter battery in 2 hours
Emergency operation also possible with conventional Mignon AA type batteries
Worldwide postal authority approval for operation without any need for registration or operating fees
Simple wireless hand-held transmitter log-on
High safety and reliability
Stop function according to EN 954-1, category 3 PL "c"
Impact and temperature-resistant housing design
Integrated impact protection in the hand-held transmitters
Individual configuration
User-friendly solutions to control up to three motion axes
Comprehensive accessories available – e.g. for improved protection against chemicals and abrasive materials
Technical data
DRC-DC radio control boasts practical technical details:

DRC-DC 6 hand-held transmitter
Six buttons for two-stage control of up to two motion axes
Stop button
Horn button
Weight incl. rechargeable battery 410 g
IP 55 enclosure
Temperature range -20 to +50 °C
DRC-DC 10 hand-held transmitter
Ten buttons for two-stage control of up to three motion axes
Stop button
Horn button
2 pushbuttons for special functions
Weight incl. rechargeable battery 490 g
IP 55 enclosure
Temperature range -20 to +50 °C
DRC-DC receiver
Receiver board for installation in DC 16/DC 25 chain hoists
E box receiver for attachment to DC chain hoist sizes DC 1–10
Including adapter plate, installation material and pre-assembled power and control cables

Convenient operation
Simple and fast commissioning by means of wireless transmitter log-on
Bi-directional signal transmission
Graphic display showing battery capacity and installation status or warning messages
Stop function according to EN 954-1, category 3 PL "d"
Convenient operation for smooth and precise travel
High availability ensured by high-speed charging of the transmitter battery in 2 hours
Emergency operation also possible with conventional Mignon AA type batteries (key-actuated transmitter)
High operating reliability
Impact and temperature-resistant housing design
Integrated impact protection on DRC-10 hand-held transmitter
Individual configuration
Also available as a complete set for existing universal cranes
Comprehensive accessories available for improved protection against chemicals and abrasive materials
Postal authority approval for operation without any need for registration or operating fees in many countries
Technical data
DRC-10 pushbutton transmitter
6 infinitely variable pushbuttons (for infinitely variable or max. 2-stage control of up to three axes)
Horn/limit switch test button
Stop button
2 pushbuttons for special functions
Weight incl. rechargeable battery: 500 g
IP 55 enclosure
Temperature range -20 to +50 °C
DRC-J joystick transmitter
1 joystick for lifting/lowering axis
1 joystick for two axes (cross and long travel)
1 horn/start button
1 limit switch test button
2 pushbuttons for special functions
Mechanical key-operated switch to turn the transmitter on and off
Weight incl. rechargeable battery: 1,800 g
IP 55 enclosure
Temperature range -20 to +70 °C
DRC-MP receiver
Supply voltage 42–240 V AC, +/- 10%, 50–60 Hz
Output relay for 250 V, 8 A, AC11 PWM outputs
3 digital feedback channels
Power consumption 12 VA
IP 65 enclosure
Temperature range -20 to +70 °C
Dimensions: W x H x D: 256 x 183 x 104 mm

With the DRC-J and DRC-JT(S) radio control systems, crane control is safe and convenient. The basic structure of the two control systems is almost identical: A bright and high-contrast two-colour display provides information on the crane’s current operating statuses using easy-to-understand symbols. Cranes and hoists can be intuitively controlled by means of two joysticks. These allow the operator to control the crane without taking their eyes off the crane and the load. Additional pushbuttons can be used for optional programmable special functions.
DRC-J is the basic control system. The ‘T’ extension is a model specifically designed for tandem crane operation. The DRC-JTS variant also offers the possibility to incorporate a key-operated safety switch (‘S’) between the two joysticks for switching on and off.

A simple switch to improve safety and reliability
The simplicity of the user interface provided by DRC-JT(S) makes it possible for the crane operator to safely switch between single crane operation (crane selector switch: A or B) and tandem crane operation (crane selector switch: A+B) using a selector switch. As soon as the system needs to be switched from single crane control to tandem crane control, one of the two controllers needs to be logged off. With the main transmitter, the operator can now control both cranes with up to four trolleys. A simple turn of the selection switch safely switches control over to tandem mode. In connection with a DRC-DR D3 receiver, the DRC-JT(S) control concept satisfies the requirements of standard EN 13849-1: Cat. 3, PL “d” for safety-related parts of controls.
Safe, by Demag – SafeControl
The Demag SafeControl concept ensures that the switchover between single crane and tandem crane control is performed as a safe process. This process fundamentally includes just two control steps. First, one transmitter is logged off. In the second step, the remaining transmitter takes over the control function of the cranes. This process is interactively controlled by the SafeControl units of both cranes. In this way, a technical fault or a crane operating error can be prevented from causing any unintended change in the operating mode.
The Demag StatusBoard shows the current operating statuses of the cranes – visible from the distance on the crane girder. The crane operator can see at all times which crane and/or trolley is selected, which individual or total loads are transported, and which assistance and convenience functions are activated. Moreover, error messages, information messages and service data are visualised.
Ergonomics & function
Visible
Bright, high-contrast display to show operating statuses, load information and charge level, etc.
Two-colour display: neutral and red
Optional large Demag StatusBoard display provides information on the crane operation using easy-to-understand symbols
Precise
For long/cross travel: Mechanical latch at slow speed (V1)
Ergonomic
Joysticks for intuitive crane control
Left: forward/reverse long travel and left/right cross travel
Right: lift/lower load
Safe
Ribs to prevent accidental actuation
Optional key-operated safety switch (Cat. 3, PL “d” acc. to EN 13849-1)
Intuitive
Intuitive communication between crane and operator through ergonomic control elements
Shaped
Ergonomic grips for fatigue-free operation
Robust
Tough housing made of polyamide with a smooth, scratch-resistant surface
Battery charge & productivity
The DRC-J and DRC-JT(S) radio transmitters are part of the Demag D3 generation of radio equipment. That means they offer all the benefits of these radio systems:

Endurance
Optimised power management: Hardware design with low-energy chipsets
HF transmission for low power consumption
NiMH battery technology
The result: 2.5 hours of charging for 5 days of continuous operation
Safety
DRC-JT(S): switchover between single crane and tandem crane control as a safe process
D3 systems satisfy the requirements of the DIN EN 13849-1 machine safety standard Cat. 3, PL “d”

Telescopic handler adjustable in height to a maximum of 3.5 m
1,599.00 € *
excl. VAT plus shipping costs
Immediately available
Product number: M80.430.100
description
Product information "Telescopic handler max. 3.5 m height adjustable"
when it gets too tight for the forklift, the telehandler helps
for transporting stones even in tight spaces
Length of the telescopic handler adjustable: the arm can be extended up to a maximum of 3,510 mm
the arm can be adjusted in height in three different positions
Max.load capacity: with minimum projection (0.64 m) 2.500 kg with maximum projection (3.51 m) 600 kg
Foldable stand
including load hook and shackle
galvanized
Weight: 205 kg
Height adjustment: 3 positions
Extendable length: up to 3,510 mm
Load capacity: 600 - 2,500 kg

With the DSC-3, DSC-5 or DSC-7 control pendants, users literally have hands-on control of Demag DC chain hoists. DSC-5 is much more compact than previous control pendants designed for controlling two motion axes (lifting and cross travel). DSC5 and DSC7 control pendants fit well in the user’s hand and allows both left and right-handed operators to control the hoist safely, reliably and intuitively, both with and without gloves. Single-handed control also makes it possible for the operator to manipulate the load with a free hand at the same time.
The benefits at a glance
One-hand operation - allows simultaneous handling of the load with the other hand
DSC-5: 2-axis control pendant for 2-axis operation
Ergonomic: low actuation forces enable fatigue-free operation
Directional stickers are covered and protected by transparent hard plastic caps
Modern design
Easy installation thanks to proven plug-in connection
Wear and impact-resistant housing
Clear switching points
Safe 24 V low-voltage design
Technical details
High resistance to impacts, abrasion resistance
IP65 enclosure
Largely resistant to aggressive media (fuels, oils, greases, salt water, cooling lubricants, diluted lyes)
Resistance to ageing and UV light of the housing parts
Use in enclosed rooms and outdoors
Operating temperature range: –20°C to +60°C (storage: -25° to +70°C)

Manzelli vacuum lifter Topline VAM 3PN / 625
€ 3,995.00 *
excl. VAT plus shipping costs
Available again soon
Product number: M29.560
description
Product information "Manzelli vacuum lifter Topline VAM 3PN / 625"
3 suction plates
suitable for polished, sawn, rough, flamed or brushed surfaces
rustproof: suction plate made of stainless steel, frame construction made of rustproof, electro-welded quality steel, reserve vacuum container made of rustproof aluminum
the two outer suction plates can be moved individually, rotated by 90 degrees, installed or locked - so worktops with cut-outs or smaller plates can also be lifted without any problems
automatic swiveling from 0 - 90 degrees via DL tilt cylinder
safe lifting and transport thanks to acoustic and optical warning system
Generation of the vacuum via DL connection 6 bar 120 l / min | Weight 69 kg
Dimensions (L / H): 1,500 x 850 mm
Plate size (L / W): 2x 450 x 300, 1x 450 x 200 mm
Vertical load capacity: 625 kg
Type: VAM 3 PN / 625

Manzelli vacuum lifter Exential VAM16PN / 360 - ceramic
€ 7,095.00 *
excl. VAT plus shipping costs
Available again soon
Product number: M29.810
description
Product information "Manzelli vacuum lifter Exential VAM16PN / 360 - ceramic"
for ceramic plates
Traverse length 2,400mm, with 4 adjustable crossbeams L = 1,170mm
for ceramics, max.plate size 3600 x 1200mm
with 16 round suction plates ø150mm (vulcanized aluminum), movable, spring-loaded
with steel safety container and automatic tilting 0-90 ° via DL tilting cylinder
complete with warning device with charger
Air requirement at 6 bar: 120 l / min.
Weight: 130 kg
Dimensions (L / W / H): 2,567 x 1,259 x 860 mm
Plate size (ø): 16x150 mm
Vertical load capacity: 360 kg

Stone crusher Triton 2
With the stone crusher Triton 2 you can easily transform your leftovers to litter material. Just put a big bag under the crusher and fill it up with stone leftovers.
Size of the final material 5-60 mm (adjustable with set screw)
Maximum processing amount of stones per hour: 1 ton
Maximum length of the processed stone: 2000 mm
Maximum width of the processed stone: 400 mm
Maxmale thickness of the processed stone: 60 mm
400 volts / 3 Ph + N + PE

Pillar jib crane LSX
Robust steel construction with a solid jib for high usable crane hook height.
Painted in RAL 1007 daffodil yellow
Overall height: 3300 mm
Operating voltage: 3/PE~50 Hz 400 V
Type of control: direct control
Protection: IP55
Electric chain hoist 500 kg
Painted in RAL 5017 traffic blue
Lift 2-stage
Duty cycle: 60% ED
Circuits: 360 c/h
Mounting with intermediate plate
Other sizes and models available on request!
Details
Share
Capacity kg 500
Radius mm 4000
Cross travel manual
Swivel manual

Pillar jib crane LSX
Robust steel construction with a solid jib for high usable crane hook height.
Painted in RAL 1007 daffodil yellow
Overall height: 3300 mm
Operating voltage: 3/PE~50 Hz 400 V
Type of control: direct control
Protection: IP55
Electric chain hoist 500 kg
Painted in RAL 5017 traffic blue
Lift 2-stage
Duty cycle: 60% ED
Circuits: 360 c/h
Mounting with intermediate plate
Other sizes and models available on request!
Details
Share
Capacity kg 500
Radius mm 4000
Cross travel manual
Swivel manual

Manzelli vacuum lifter Exential VAM16PN / 360 - ceramic
€ 7,095.00 *
excl. VAT plus shipping costs
Available again soon
Product number: M29.810
description
Product information "Manzelli vacuum lifter Exential VAM16PN / 360 - ceramic"
for ceramic plates
Traverse length 2,400mm, with 4 adjustable crossbeams L = 1,170mm
for ceramics, max.plate size 3600 x 1200mm
with 16 round suction plates ø150mm (vulcanized aluminum), movable, spring-loaded
with steel safety container and automatic tilting 0-90 ° via DL tilting cylinder
complete with warning device with charger
Air requirement at 6 bar: 120 l / min.
Weight: 130 kg
Dimensions (L / W / H): 2,567 x 1,259 x 860 mm
Plate size (ø): 16x150 mm
Vertical load capacity: 360 kg

With the DSC-3, DSC-5 or DSC-7 control pendants, users literally have hands-on control of Demag DC chain hoists. DSC-5 is much more compact than previous control pendants designed for controlling two motion axes (lifting and cross travel). DSC5 and DSC7 control pendants fit well in the user’s hand and allows both left and right-handed operators to control the hoist safely, reliably and intuitively, both with and without gloves. Single-handed control also makes it possible for the operator to manipulate the load with a free hand at the same time.
The benefits at a glance
One-hand operation - allows simultaneous handling of the load with the other hand
DSC-5: 2-axis control pendant for 2-axis operation
Ergonomic: low actuation forces enable fatigue-free operation
Directional stickers are covered and protected by transparent hard plastic caps
Modern design
Easy installation thanks to proven plug-in connection
Wear and impact-resistant housing
Clear switching points
Safe 24 V low-voltage design
Technical details
High resistance to impacts, abrasion resistance
IP65 enclosure
Largely resistant to aggressive media (fuels, oils, greases, salt water, cooling lubricants, diluted lyes)
Resistance to ageing and UV light of the housing parts
Use in enclosed rooms and outdoors
Operating temperature range: –20°C to +60°C (storage: -25° to +70°C)