If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:$15000-35000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
1. For flat and bevel edge polishing
2. Easy to change pad, saving much time for switch grinding pad.
3. Constant pressure automatic compensation, break the conventional compensation way and keep the surface brightness same.
4. Automatic warning when it runs out of processing stone.
Wisdom
China
QUANZHOU WISDOM MACHINERY DEVELOPMENT CO., LTD
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Grinding Machine, Slab Polishing LLBV/2000 M-4-6-8
Grinding machine for slabs mod. LLBV/2000 M allows to grind slabs of marble of different thickness. Its structure is composed of a normalized grinded base made of electro-welded steel, and of a moving bridge made of stiffened steel. The single, cast iron operating heads are positioned on the bridge. It is installed on the base a nonskid conveyor belt, covered with rubber, to avoid undesirable movements of the slabs during the processing. The bridge motion is by means of wheels in oil bath. It is possible to adjust their speed through an inverter installed on the electric board. All the mechanical guides can be set to adjust the clearance. All the water supply pipes are dimensioned in such a way that they allow an adequate dressing of the abrasive wheels. The electric board is built with steel plate, thickness 15/10, painted with RAL 7032. Its degree of protection is IP 55. A PLC installed inside the electric board controls the adjustments, the movements, the diagnostic and the alarms. A multi-pages graphic terminal makes easier its employment and control. An insulated transformer for 380V network voltage and output 48V is installed inside the electric board for all the control bodies to guarantee the safety of the operator in case of breakdown. All the motor protective devices (fuses, magnetothermics and thermal relays) are dimensioned for each single motor to intervene in case of anomaly to protect it.
Bombieri & Venturi S.p.A.
Italy
Bombieri & Venturi S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Automatic Polishing Machine 2 +10
Tuto Mermer
Tuto Mermer Dis Tic Ltd Sti.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
Merkon Plk 2000 Xr-16 + 1 Gms Polishing Line for Marble, Travertine, Limestone
Merkon Machine
Turkey
Merkon Machine
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Yensa Marble Machines
Turkey
Yensa Marble Machines
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
$20000-25000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic Polishing Machine for Granite and Marble – PMG is an automatic polishing machine for granite , marble and artificial stone. PLC control system and HMI simplify the operation. Automatic programming. Lifting of each polishing head is controlled by two pieces of air piston. Pressure of polishing heads is adjusted independently to support rough polishing, fnish polishing and shining. The Automatic Identifcation System for detecting the shape of stone ensures that the lifting and descending of polishing heads are accurate, when matching slabs of different shapes. The useful working width is also set by this system. The damping device of polishing heads not only prevents slab breaking but also saves abrasive consumption. Automatic lubrication.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
$51000-55000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Kaida KDMJX-16C/20C/24C stone slab polishing machine shapes and polishes quality edges on granite, marble, and quartz. It can perform multiple different flat polishing details.The polishing wheel of each group has various polishing structures for different structures, thicknesses, densities and glosses. The working mode is on a continuous process basis; this means that all the pieces are loaded one after the other on the machine and move past a series of polishing motors so that they come out completely finished.
KAIDA
China
Fujian Province Kaida Stone Machinery Co.,Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
$56000-65000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
1. Applicable for polishing the surface of granite & marble slabs and tiles.
2. Using the most advanced technology for granite polishing
3. Superior material, reasonable structure, completed processing technique, stable performance, high efficiency and energy saving.
4. Electric parts are of worldwide brand, PLC control system and friendly human-machine interface via LCD to achieve fully auto computerized control.
5. Automatically detect the slab profile by laser scanning device.
6. Sensitive collision avoidance of polishing head.
WANLONG
China
FuJian WanLong Diamond Tools CO,.LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
slab polishing machine up to 16 head for marble and 22 head for granite
Konmak
Turkey
Konmak A.S.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
FLM is synonym with high output , high quality polishing , endurance and low consumption.
The construction,which is exceptionally strong and compact,provides perfect rigidity to the beams and to the entire driving system,for perfect side sliding and a very fast traversing speed.
Because of the in depth design and construction of all the components fo the head and the abrasive-holding plate,the tool evenly and regularly touches the material.
The FLM range of polishers , all noiseless and ergonomic, offers the greatest level of safety throughout the polishing process and during servicing.
All polishing, control and operating setting are set up and controlled by the user through an easy, user-friendly system and an operating setting management program while remaining simple and flexible.
The FIM range is available in a wide range of models with up to 24 polishing heads.
This big machine is more suitable for the artificail stone and big producetion marble cutting.
Frugoli
China
Fujian Frugoli Machinery Development Co.,Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
$35000-55000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
HLMJX-8, equipped with multiple resin disc heads and PLC control system, can grind and plolish slabs continously and automatically, is perfect for surface finishing of hard stone such as granite. Mounted with different type of heads, it’s also great for marble, quartize and other stone slab finishing.
Main Features:
1) Using PLC electrical system and LCD screen menu offer intelligent control.
2) Processing width and working pressure of grinding heads can be adjusted freely .
3) Sensor at the entrance to scan the shape of the slabs in sequence and transmit the signal to controlling unit for precise working.
4) Adopting central automatic lubrication system, having all moving parts and bearings to get a good lubricating effect and longer life.
5) Conveyor self-cleaning and stone chip removing system
HUALONG
China
Fujian Province Hualong Machinery CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
For fast and perfect polishing of marble slabs up to a max width of 200 cm.
Basement group:
The basement is made up of one rubber conveyor belt with anti slip tooth surface slides manufactured in order to obtain the maximum stability, precision of work and longer life.
This group is formed by:
- Basement of welded steel.
- Milled steel plates welded on the basement where the abrasive stones are acting.
- Driving roller and tensioning belt roller, with a special device that permits to adjust the conveyor belt stretch.
- Splash and lateral guards in order to avoid coming out of water.
- HP 3 motor for speed variator of the conveyor belts from 0 ÷ 2 mts. per minute.
Bridge:
Made up of electrowelded steel with high mechanical resistance with n°10 spindles prearranged to hold grinding polishing plate prearranged to hold the abrasive stones. The bridge is sliding on rectified and protected steel guides with adjustable speed by means of hydraulic motor controlled by a hydraulic central unit of 5,5 HP.
Spindles holding grinding/Polishing plates:
Seasoned cast-iron made, duly ribbed, made up of:
- Flanged motor HP 10.
- Belt transmission pulley with tensioning device of the same.
- Chromium plated rod holding spindle shaft, protected by rubber bellows.
- Spindle shaft rectified in side of ball bearings and grooved for perfect coupling with pulley.
The vertical lift and working pressure of the spindles is obtained by a hydraulic central unit of 4 HP.
Each spindle is controlled by the following equipments:
- Manometer for pressure reading on the abrasive stone.
- Push-button control for up and down movements of the working plate.
- Hand-grip for pressure adjustment.
- Cylinder and piston for rapid lifting of the rod holding the spindle, coming down and pressure adjustment on the abrasive stone independent from the consumption of the same.
- Connecting tubes and other pipe fittings.
Electric plant:
Electric plant type "Telemecanique" controls and protects the machine motors. Made up of:
- Water proof metallic locker, containing fuses, thermal relay, remote control switches and remaining electrical components for the automatic and stop safety equipment for each single motor.
- Control board push button and low tension, with working lamps for each single spindle.
- Amperometers for spindle motor.
- Connecting cable collector for single motor, with machine terminal board.
- Terminal board for connection of the machine to the electrical board.
Slabspresence reader device:
The slabs presence reader device, our type "STEPMATIC" is made up of n° 3 sensors located on the front part of the machine, provide to check the slabs presence thanks to electronic device which controls the plate up and down movements according with the belt speed and the presence of the slab. This system allows to anticipate or postpone, directly from the control board the lifting lowering of the plate in order to follow the speed of the belt and to modify the lateral position of the sensors according to an eventual defect of the block.
Standard accessories:
- n°10 Plates Ø 450 mm. to hold the abrasive stones
- Foundation bolts for the basement.
- Set of service keys.
- Lubrication syringe.
- Detailed instruction book for the machine erection, maintenance and lubrication.
Technical data:
- n°10 Motors of 10 HP for spindles holding abrasive stones.
- n° 1 Motor of 3 HP for belt working speed adjustment.
- n° 1 Motor of 4 HP for hydraulic unit of raise and descend of spindles.
- n° 1 Motor of 5,5 HP for bridge holding spindle traverse movement.
Total power installed : HP 112,5 = 83 Kw.
Real consumption : 65% of the installed power that is about 54 Kw/hour.
Water consumption : About 125 litres per minute with 2 atm pressure.
Weights : Net 11,30 tons. With sea package 12,70 tons. Volume 100 cub. mts.
MORDENTI S.R.L.
Italy
MORDENTI S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Our Sizing and Polishing Line have loaded today for Dervisoglu Marble.
Have a good trip !
Konmak
Turkey
Konmak A.S.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
PLATE MARBLE POLISHING MACHINE
This efficiency proved machine has been specially designed for thickness gauging and polishing of strips with cut ends. And max. width dimensions 2100 mm. The new PLX 2000 series supported with high technology, can reach top production speeds, whilst reducing consumption, maintenance and depreciation. THE SPINDLE: The PLX 2000 G features powerful, high precision polishing spindles with pneumatic working pressure which easily and perfect polishing any kind of granite.The spindles are entirely processed on CNC using highest quality of the material. Every spindle is assembled in the center of the mobile beam.
The spindles are working at their centre of gravity on the rotation axis so the mechanical play is reduced and this eliminates maintenance works.
The spindle has two electrical motors special tothed belt transmission system that the motors drive by prevents loosening or slipping of the spindles even under stress. The pneumatic system makes use through counter air pressure of the considerable spindle mass to obtain stability to the polishing heads. Counter pressure pneumatic system allows to polish fragile and delicate materials, with low working pressure. The machine controls the lifting movement of the spindles automaticly according to feeding the material
THE BEAM: The spindle holding beam is made of electro - welded steel and moves on exteremely wear resistant cast iron and alloyed bronze slideways. Sliding components are working in an oilbath and protected by stainless steel labyrinth seals. Beam movement is done by two motor reducer system located at the end of the beam to ensure constant and regular beam motion. The beam moves on two side bridges made of electrowelded steel and it has very strong structure to eliminate vibration during the operation. The synchronization shaft located the rear side of the beam provides uniform movement at both beam ends. The bridge moves on bronze alloyed slideways working in oil bath The adjustments, quick format changes and performing very rapid arrangements are some minor themes of high technological feedbacks manufactured for productive flexibility in this machine.
THE TABLE: The uniblock steel chasis designed to provide high rigidity and stability. The surface of the table covered by hard stainless steel to ensure long life of table and conveyor belt. At the ends of the table 2 turned belt drive rollers are installed one of which is free moving, and other one is motorized. The belt drive rollers are made of special steel. The belt is driven by a planetary type gear –motor to provide safe and uniform movement during the process. The conveyor belt speed adjustment is obtained by electronic frequency inverter.
ELECTRICAL AND WATER CONNECTION: The electrical and water connection between machine stationary part and the mobile beam is made by flexible cable chains which assure safer working conditions and a longer life for components. The polishing heads cooling water feed is performed by steel pipes which operates in a fixed position in the center of the spindle. The water cooling pipes can be removed very easily for the periodical clearing for calcereous substances. THE HEADS: A polishing head with swinging arms to hold the tools (abrasive or diamond) is mounted on each spindle. The motion of each swinging arm is obtained by an extremely precise, kinematical and mechanical system that reduce any clearance therefore ensuring low noise and long tools life. The particular geometry, the oscillation angle and frequency of the arms help to obtain high tools efficiency. The lubrication of the mechanical parts is by means of permanent oil bath with automatic lubrication pump. The even operation of the abrasive-holder arm controlled by a gear kinematical motion and the axial elasticity of the head provide large removals and high slab polishing level.
MACHINE CONTROL: The machine is controlled by a PLC (programable logic control) system with a 12 inch Touch Screen color panel for managing to synchronize all the processing parameters by easy interface and operator controls.
PAINT TREATMENT: Surface protected with two coats of bicomponent epoxy paint applied after sand blasting operation. -
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Slab Polishing Machine
for technical details please contact Kimmco company
Kimmco
Turkey
Kimmco Koray International Marble & Machinery Co.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
PLATES: THE HUB OF THE POLISHING PROCESS
The plates play an essential role in determining the quality of the polishing result and the finishing of the slab.
Effe Meccanica has carefully designed and manufactured and manufactured this component to guarantee high-quality results with abrasive tools that are easy to maintain and install.
RELIABLE PLATES REQUIRING VERY LITTLE SERVICING
The section-holding plate with swinging arms of the FLG polisher is the fruit of a long experience and indepth studies ,developed with the latest advanced design systems.
The plate stands out for its very simple construction , which guarantees an excellent productive output and the lowest maintenance.
lts reliability is guaranteed by the tests which are conducted on every plate, once assembled , to check they meet the quality standards .
Frugoli
China
Fujian Frugoli Machinery Development Co.,Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
General Characteristics
The SNM-PC is a heavy duty belt type polishing machine with surprising results in working speed and polishing degree. It ensures optimal finishing at low processing cost.
Because its components are mass-produced on computer numerial control (CNC) machines in house by SNIC, this machine is offered at an incredible low price.
The maintenance cost of this amchine is very low, thanks to the hight quality of all its components. A yearly maintenance contract(labor and spare parts)is offered for a 5% annual fee.
It comes in various to meet a variety of machining requirements. Depending on the material to be polished, it can be fitted with a different number of calibrating and polishing heads.
Each spindle unit is driven by an electric motor, and the raising, lowering and working pressures are pneumatically controlled. Machine is designed to run both on 50hz and 60hz with asynchronous 3-phase motors.
All push-buttons are housed in a stainless steel frame fixed to the upper part of the machine for better control.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Number of Polishing Heads : 6/8/10/12/14/16 Pcs
Polishing Head Plate Diameter : 520 mm
Polishing Head Motor Power : 11 kW
Working Width : 2200 mm
Working Thickness : 8-80 mm
Machine Width : 2900 mm
Machine Height : 2400 mm
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
"Storm" Series LCG / LCM 600/2200 is a polishing machine from the Italian company CO.M.E.S., which is the result of 40 years of experience in the production of polishing heads for marble, granite and ceramics.
Ergonomics, efficiency and safety are the principles that inspire our work, so that we can provide each buyer with the highest quality CO.M.E.S. Every detail of the machine has been designed with incomparable accuracy. Countless hours of development and factory testing of STORM polishing lines ensure that the strictest standards are met.
Co.Mes
Poland
Euro Arss S.C.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Kamhan Industrial Limited
Pakistan
Kamhan Industrial Limited
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The oscillation of the bridge of a traditional polishing machine that moves several spindles at the same time represents a limit especially for irregular slabs. For this reason, SIMEC presents to the polishing market the ORBITAL series featuring an oscillating and independent movement of each spindle. As a matter of fact, in the ORBITAL polishing machines there is no longer a single oscillating bridge but several bridges on which the spindles move individually making movements on different axes, similar to the ones performed by a manual processing and above all perfectly reaching the edge of the most irregular slabs without having to lift the other heads and in this way tools totally spend more time on the material.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Bhagwati Machine Tools
India
Bhagwati Machine Tools
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The HPM 2200 RS machines are high performance polishing machines for marble slab, deriving from the granite version NP RS, from which they inherit most of the technological solutions.
Many customers has recently installed a new polishing line for marble and limestone slabs. In addition to the high performance new polishing machine HPM RS for marble and limestone slabs, the line is equipped with automatic loader mod. FINGER and with the automatic unloader robot mod. RAPID.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Travertine
Machinery Function Features:
OPCM Automatic Marble Slab Polishing Machine
MKS
Turkey
MKS Marble Cutting and Polishing Machines Co.Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Polishing machine for marble slabs, available with heads from 4 to 16, equipped with a 9.2kW motor for each spindle and with working pressure control fitted on each polishing head. The control panel has a wide display to ensure complete control of the machine. LM 2100 RS is available also in the combined version for polishing slabs and calibrating and polishing strips and/or tiles. The calibrating is carried out by rotating plates having a diameter of up to 1100 mm, which can be equipped with diamond tools and installed in a fixed position at the entry of the polishing machine.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The perfect polishing of marble slabs on industrial scale requires a modern line equipped with state-of-the-art technologies.
Pedrini is able to provide the most complete solutions ensuring high production performances, high degree of the polishing quality with low costs of operation and maintenance.
Pedrini polishing lines for marble slabs are designed, manufactured and installed to meet every requirement of each customer
Each polishing line is set according to the available spaces and is customized thanks to the use of a wide range of options, machines and auxiliary equipment designed to meet any kind of production need and automation level.
The polishing machine Galaxy B220MA is the basic machine in the polishing lines proposed by Pedrini.
All components have undergone structural inspection trough the FEM (Finite Element Method). The structural components surfaces are protected with three coats applied after sandblasting, while the small parts have undergone a cataphoresis corrosionproofing treatment.
The strong base, built in normalized steel work with large thickness longitudianl and transversal elements, has been further stiffened through continuous sloped structures that protect conveyor belt lower route by conveying water and eventual waste directly to ground.
All surfaces matching the upper structures have been machined through one sole positioning on the tool machine to achieve perfect units coupling.
The multi-clothe anti-slip conveyor belt is controlled by two large diameter rolls: a traction roll powered through an epicyclical gear motor, an idle roll equipped with tension devices.
Mobile beam, in heavy steel work, is designed as a sole body with a very rigid closed section. The beam slides in oil bath on hardened and ground large diameter rolls into housings, that are protected through fixed labyrinth guards, inside the bridges. Beam transversal movement is controlled by two gear motors, synchronized through a connecting shaft, which drive two helical tooth pinions tempered and ground with two racks fixed on the bridges.
Two special devices constantly lubricate with oil the contact between pinion and racks.
Two adjustable rolls units control mobile beam longitudinal position and contrast spindle vertical push working on hardened guides fixed onto bridges outer sides.This technology allows for very smooth beam transversal movement because it clears racks and pinions from vertical stress and renders pulling, instead of pressing, conveyor belt longitudinal action.
Pedrini
Italy
Pedrini S.p.a. ad Unico Socio
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Suitable for milling and polishing of marble and granite
Milling head 1 and polishing heads 6
Max. working width 600 mm, max thickness 80 mm
Non length restrictions
Height adjustment by air cylinder
Automaticly adjustable
Cutter head and second polishing heads are optional extra
MAVECO Stone Machinery BV
Netherlands
MAVECO Stone Machinery BV
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
AUTOMATIC CALIBRATION AND POLISHING LINES FOR MARBLE STRIPS AND TILES
Excellence that is unrivaled.
LTotal and accessible quality has always been the top of the list of the GMM “mission”. The same commitment applied to the development of the more advanced version of the LMS series, automatic marble strips polishing machines. Following the construction philosophy that has always characterized the excellent Cemar product, the new series of polishing machines was developed using sturdy, precise and reliable mechanics. At the same time, cutting edge technological and electronic solutions were developed to ensure maximum quality of the processed material, high production yield and reduced processing waste. Result: high level performance, low running and maintenance costs with lasting durability. All at an affordable cost for the Customer.
UA customized solution for any requirement.
A customized solution for any requirement. To provide a solution for the specific needs of our Customers, the machines in the LMS series are produced in various sizes (650-850-1000) and different combinations of calibrators and polishing units. All LMS machines can work individually or positioned in production lines, even complex. This last application is easy to implement, thanks to the accompanying Software, developed entirely by GMM.
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of information about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Suitable for polishing slabs, headstones and kerbs.
Ideal for safe night shift operation, without operator.
Max. polishinh length unrestricted.
MAVECO Stone Machinery BV
Netherlands
MAVECO Stone Machinery BV
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimise the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of informations about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimize the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of information about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The NPM polishing machines are available also in the combined version for calibrating and polishing of marble slabs. The first mobile bridge (PM version) installs calibrating spindles, capable of calibrating the useful working width, the second bridge installs honing spindles, the number depending on the version, for total honing/polishing of the width working efficiency of 2150 mm.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FEATURES
BASE
Monolithic high-thickness steel base electro-welded with rectified sliding surface.
INTERCHANGEABLE WEAR-PROOF SURFACES
Made with special steel (UBNW.1.446), thickness 3 mm, to guarantee planarity over time and facilitate maintenance.
SURFACE TREATMENT
All parts are treated inside our Company, with hand sand-blasting, cold galvanising and coating with bi-component epoxy base. On request, base and shoulders can be treated with Cataphoresis or hot dip galvanising. All screws are stainless steel.
3-BELT CONVEYOR
Driven by two large-diameter drums and inverter adjustable speed. Unique system to clean and lubricate the belt to ensure uniform sliding. The drive drum is coated with vulcanised rubber to prevent slipping and ensure flow smoothly.
SPINDLE HOLDER BEAM
Sliding on the shoulders fitted with roller cage in oil bath, protected by sealed stainless steel telescopic guards. Hardened steel sliding elements interchangeable and installed on the shoulders and bridge. The spindles are housed in the centre of the beam to ensure complete stability and eliminate any possibility of vibration.
BRIDGE TRANSLATION
With pinion and rack. Central gearmotor and antirotation bar with large diameter. Shifting speed controlled from inverter).
CALIBRATION UNITS
- Calibrator spindle made with heavy steel metalwork with rectified chromeplated sleeve, that slides through cast iron bushing to absorb vibrations during processing. On the spindle plate where it serves as a flywheel and is dynamically balanced, there are calibrator rings with diamond sectors installed on them (Ø 670-870-1050 mm). Electric drive can be 22 or 30 kW.
- An automatic system combined with motor absorption acts on conveyor speed, slowing it in case of excessive overload, making the spindle stop and automatically lift. The spindle is automatically repositioned with absolute precision when the operating cycle starts back up again. The calibrator is managed from the touch screen for all of its automatic and manual functions. Automatic positioning at the pre-selected height with centesimal precision.
POLISHING UNITS
- Cast iron polishing spindles, installed in the centre of the beam, with thick and rectified chrome-plated steel shaft, sliding on bronze bushing, complete with pneumatic cylinder for lifting abrasive carrier plate.
Each spindle is fitted with a pressure gauge to control pressure and counter-pressure to balance the head during the work.
- Motors. 7.5 or 11 kW motors with single or sequential start-up. Drive transmission through high-output pulleys and belts.
- Ø 470/510 aluminium alloy polishing plates complete with Frankfurt fittings for seven abrasives. They are equipped with a multidirectional shock absorbing system to ensure maximum operating homogeneity and efficiency of the abrasive.
- Automatic centralised lubrication system of the spindles with the possibility of setting quantities and intervention.
- Abrasive finished. The machine is equipped with a system to set the thickness of the piece being processed based on which, a sensor installed on each head, calls the attention of the operator to replace the abrasive, when finished.
- Slab-guide supports with screw movement through flywheel from a unique station, complete with stainless steel slab-guide.
- Material presence detection unit to control the automatic up/down movement of heads in case of discontinuity between pieces.
SAFETY AND PROTECTIONS
- Front PLT doors with interlocking limit switch to avoid opening before the spindles stop. Side and rear stainless steel guards, easy to inspect.
ELECTRONICS: THE "THINKING HEART" OF LMS
- Reliable. After careful testing, the parts are chosen from the leading companies in the specific sectors. To minimize the probability of failure or interference, a modern “can open” network system is installed on board, which drastically reduces the number of cables between sections.
- Software developed entirely by GMM, guaranteed over time, improvable and most of all customizable according to customer requirements.
- 12" Touch Screen. Interactive graphics for complete machine cycle management with start-up in sequence of spindles, conveyor motor and bridge motor. To manage spindle down/up based on piece presence.
To view the abrasive consumption status for each head.
- Data base. Broad possibility to store large amounts of information about work done or in process.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
The LM 2100 RS is available in the combined version for polishing slabs and for calibrating and polishing strips and/or tiles. The calibrating is performed by special spindles that can be equipped with diamond tools with useful working width of 650 or 1000 mm according to the version. The calibrating spindles are installed at a fixed position at the entry of the polishing machine while the dressing spindles are installed on a mobile bridge and can operate on a useful width of 2100 mm.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
AUTOMATIC BELT POLISHING MACHINE FOR MARBLE SLABS
Thanks to CEMAR’s over twenty years experience in surface treatment of marble and granite, GMM present the most advanced version of LMS 2100 belt polishing machine for marble slabs. Respecting the philosophy that has always characterized the excellent CEMAR product, the new series of polishing machines for marble slabs is made using robust, accurate and reliable mechanics. In conjunction, the machine has advanced electronic and technology solutions to ensure maximum quality of work, high production yields and reduction of waste. All this ensure low running and maintenance costs, with high durability.
FEATURES
BASE
In sturdy electro-welded steel structure with rectified sliding plane covered with replaceable wear plates made of 3 mm thick special steel to ensure flatness and easy maintenance over time.
SURFACE TREATMENTS
All components are treated in our company with sandblasting by hand, cold galvanizing and painting with two component epoxy primer. On request, base and shoulders can be hot dip galvanized.
BELT
Pulled by two drums of large diameter. Speed adjustable by inverter. Two unique systems for cleaning and lubricating the belt to ensure flow smoothly.
BEAM
For spindle housing in a sturdy and rigid structure of welded steel. Sliding on the shoulders equipped with roller bearing in oil bath, protected by telescopic guards in stainless steel. Sliding elements made of hardened steel interchangeable and mounted both on the shoulders and on the bridge. The spindles are housed at the center of the beam to ensure complete stability and to avoid any possible vibration.
TRANSLATION OF THE BRIDGE
With rack and pinion. Starting from the version with 12 spindles, the transmission takes place with 2 gearmotors coupled at the bridge ends. Travel speed controlled by inverter.
POLISHERS SPINDLES
In cast iron, with thick chrome-plated steel grounded shaft, sliding on bronze bushes, complete with pneumatic cylinder for raising the abrasives carrying plates. Each spindle is equipped with a gauge for the control of pressure and counterpressure, necessary to balance the head during the working. The cooling water passes inside the shaft for a better and uniform distribution on the materials being processed.
MOTORS
11 kW/15 HP motors, with individual or in sequence start-up. Motion transmission with high performance belts.
ELECTRONICS: “THINKING HEART” OF THE LMS 2100
- Reliable. After careful controls, components are selected among leading companies in specific sectors (mainly Siemens or Schneider-Telemcanique).
- To make minimum the probability of failure or interference, on board of the machine is adopted modern network system "can open" which drastically reduces the number of cables between one section and the other.
- Software. Developed entirely in GMM, guaranteed over time, especially improved and customized according to customer requirements.
- Inverters. The roller conveyors and specific rollers in the entry are handled by inverters, like all the other moving parts, to balance the fl ow of material and optimize the speed of each step.
- Optical detector 120 photocells, to scan in a sequence the shape of entering slabs, done in RS485 protocol (noise free), it transmits the shape of the slab to the control unit to better manage the ascent and descent of the heads, according to the various selectable working cycles.
- Ultrasonic sensor, positioned at the entrance, to detect the material thickness. Enables fully automatic management of the abrasives consumption of each single head.
- Automatic lubrication management, for planning the quantity of lubricant to be dispensed and the dispensing times.
- Touch Screen 12". Monitor with "easy to use" interface, interactive graphics for the complete management of the machine cycle with sequential startup spindle motors, belt and bridge motors. It drives the spindles up-down stroke according to the shape of slabs. Display of abrasive consumption status for each head.
- Data base. Large possibility to store various information about the work done or in progress.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
PLATE MARBLE POLISHING MACHINE
This efficiency proved machine has been specially designed for thickness gauging and polishing of strips with cut ends. And max. width dimensions 2100 mm. The new PLX 2000 series supported with high technology, can reach top production speeds, whilst reducing consumption, maintenance and depreciation. THE SPINDLE: The PLX 2000 G features powerful, high precision polishing spindles with pneumatic working pressure which easily and perfect polishing any kind of granite.The spindles are entirely processed on CNC using highest quality of the material. Every spindle is assembled in the center of the mobile beam.
The spindles are working at their centre of gravity on the rotation axis so the mechanical play is reduced and this eliminates maintenance works.
The spindle has two electrical motors special tothed belt transmission system that the motors drive by prevents loosening or slipping of the spindles even under stress. The pneumatic system makes use through counter air pressure of the considerable spindle mass to obtain stability to the polishing heads. Counter pressure pneumatic system allows to polish fragile and delicate materials, with low working pressure. The machine controls the lifting movement of the spindles automaticly according to feeding the material
THE BEAM: The spindle holding beam is made of electro - welded steel and moves on exteremely wear resistant cast iron and alloyed bronze slideways. Sliding components are working in an oilbath and protected by stainless steel labyrinth seals. Beam movement is done by two motor reducer system located at the end of the beam to ensure constant and regular beam motion. The beam moves on two side bridges made of electrowelded steel and it has very strong structure to eliminate vibration during the operation. The synchronization shaft located the rear side of the beam provides uniform movement at both beam ends. The bridge moves on bronze alloyed slideways working in oil bath The adjustments, quick format changes and performing very rapid arrangements are some minor themes of high technological feedbacks manufactured for productive flexibility in this machine.
THE TABLE: The uniblock steel chasis designed to provide high rigidity and stability. The surface of the table covered by hard stainless steel to ensure long life of table and conveyor belt. At the ends of the table 2 turned belt drive rollers are installed one of which is free moving, and other one is motorized. The belt drive rollers are made of special steel. The belt is driven by a planetary type gear –motor to provide safe and uniform movement during the process. The conveyor belt speed adjustment is obtained by electronic frequency inverter.
ELECTRICAL AND WATER CONNECTION: The electrical and water connection between machine stationary part and the mobile beam is made by flexible cable chains which assure safer working conditions and a longer life for components. The polishing heads cooling water feed is performed by steel pipes which operates in a fixed position in the center of the spindle. The water cooling pipes can be removed very easily for the periodical clearing for calcereous substances. THE HEADS: A polishing head with swinging arms to hold the tools (abrasive or diamond) is mounted on each spindle. The motion of each swinging arm is obtained by an extremely precise, kinematical and mechanical system that reduce any clearance therefore ensuring low noise and long tools life. The particular geometry, the oscillation angle and frequency of the arms help to obtain high tools efficiency. The lubrication of the mechanical parts is by means of permanent oil bath with automatic lubrication pump. The even operation of the abrasive-holder arm controlled by a gear kinematical motion and the axial elasticity of the head provide large removals and high slab polishing level.
MACHINE CONTROL: The machine is controlled by a PLC (programable logic control) system with a 12 inch Touch Screen color panel for managing to synchronize all the processing parameters by easy interface and operator controls.
PAINT TREATMENT: Surface protected with two coats of bicomponent epoxy paint applied after sand blasting operation.
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
This machine is made for polishing marble and stone with high quality and high production, its used for polishing marble with different sizes from 20 cm up to 85 cm of width. and it can be available with different numbers of calibration and polishing heads in order to give the best performance and high efficiency.
Jordan
Ahmad Zaidan Sons & Co.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
$50000-100000
Warranty: 12 Months
Usage: Granite, Marble, Onyx, Artificial Stone, Travertine
Machinery Function Features:
Applicable for polishing the surface of granite slabs and tiles.
Automatic polishing machine of newly design, which absorbs the most advanced technology of granite polishing and has created several patent technologies.
Superior material, reasonable structure, completed processing technique, stable performance, high efficiency and energy saving.
Electric parts are of worldwide brand. PLC control system and friendly human
-machine interface via LCD to achieve computerized control.
Automatically detect the slab profile by laser scanning device.
Sensitive collision avoidance of polishing head.
13YR
China
FuJian Nan'an Henglong Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Slab Polishing Line Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Travertine
Spain
Marmoles La Vina
Contact Supplier
Have a Question? Ask our expert
Ask now
