Onyx Hydraulic DTH Drill Machine

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Ünite Motoru / Engine Unit 7.5 KW, 10 Hp, 1500 dev/dak Elektrikli / (Rpm) with Elektricity Sağ Sol Dönüş Motoru / Right-Left Rotation Engine Hidrolik Motor / Hydraulic Engine Aşağı Yukarı Hareket Motoru / Forward-Backward Movement Engine Hidrolik Motor / Hydraulic Engine Delme Boyu / Drilling Length Sapmadan 15 m/30 m Delme Kapasitesi / 15 m/30 m Drilling Capacity with No Deviation Delme Hızı / Drilling Length 1metre / 3-5 dak. - 1 m. / 3-5 min. Delme Çapı / Drilling Diameter 90 mm Hava Tüketimi / Air Consumption 2.1 m3 / dak (6 Bar Basınçta) - 2.1 m3 / min. (6 Bar pressure) Tij Boyu / Tij Lenght 100 cm 10 Adet - 100 cm / 10 Piece Matkap Ucu / Drilling Bit Hava Tabancası Bit ile Birlikte 1 Adet / Air Gun with Bit 1 Piece Çalışma Tipi / Operation type Sağa Sola Hareket Hidrolik Kontrollü/ Right and Left Movements are Hydraulic Control Aşağı Yukarı Hareket Hidrolik Kontrollü/Up and Down Controls are Hydraulic Control Verilen Aksesuarlar / Accessories 2 Ad. Anahtar, 3 Ad. Gergi Zinciri ve Aparatları, 1 Ad. Yağdanlık, 10 Ad. Boru, 1 Ad. Hava Tab. Boru Sehpası, 4 Ad. 10’ar Metre Hidrolik Hortumları,1 Ad. 10 Metre Hava Hortumu 2 Piece Wrench, 3 Piece Tension Chains and Accecories, 1 Piece Lubricator, 10 Piece Bits, 1 Piece Air Gun Bit Stand, 4 Piece Hydraulic Hoses 10 m, 1 Piece 10 Meter Air Hose Makinanın Net Ağırlığı / Weight 115 kg. Makine Ekipmanları ile Birlikte Ağırlığı Machine Weight With Equipments 450 kg. / Total 450 kg.

Drilling Using Dual Motors - Walking.
Fast and Powerful Drilling.
Night Work Lamps.
Hydraulic Jaw System,
Keyless Pipe Removal and Installation.
Easy Installation Works 3-4 Times Faster Compared to DRILLING.
One Person Usage Ability.
Installation in the shortest possible time with the Tower Rotation System and Disassembly Jaws.
Double Engine (Diesel - Electric).
Electric MOTOR ↔ 22 kw 30 hp
DIESEL ENGINE ↔ 55 kw 80 hp AIR COOLED 4 CYLINDER DEUTZ
Gun ↔ Right-Left Rotation: Hydromotor - Transmission Reinforced
Gun ↔ Forward and Reverse Movement: Hydromotor - Transmission Reinforced
Machine Forward - Reverse Movement 3WD Italian Travel System
Drilling Speed ​​↔ 2 m / 6-10 Minutes (at 6-10 Bar)
Drilling Diameter ↔ Between 85 mm - 100 mm
Air Consumption ↔ 2.1 m³-4.5 m³ (at 6-10 Bar)
Working Angle ↔ Horizontal - Vertical - Parallel - Oblique Angles
Usage:Balancing - Boom Sliding - Sliding - Sled Upright Pistons -
Total Weight ↔ 4.900 Kg
Height ↔ 6 Mt.
Width ↔ 2.10 Mt
Height ↔ 2 Mt.
Supplied Accessory ↔ 2 mt 14+1 Pcs. Pipe / PERVOL GUN

MAGNUS 90 Drill
The Drilling Machine has the function of drilling into any stone to pass the diamond wire. It is an autonomous machine. It is adaptable to various types of soil. Allows vertical, horizontal and inclined drilling.
You can place your order or request a quote through our contacts.

The tr-ex 1000 is an excavator or backhoe mounted drill attachment built to be dependable, rugged and versatile. The attachment mounts to the excavator (dipper stick) and after installation you can go from drilling to bucket or breaker work in 20 minutes.

Benefits

• Big reach advantage over dedicated hydraulic drill rigs

• Very quick setup times between holes

• Ideal for blast hole, pipeline, pre-shear, rock bolting and drilling with casing

• Incredible geometry for drilling

• Hydraulic drill performance & reliability

• Lower capital cost than a dedicated drill rig

• Excellent mobility

• Operator health and safety

The bottom line

Traxxon Rock Drills has been building drills from the ground up for over 40 years. We manufacture every one of our products using the highest quality components, dedicated skilled technicians and using our decades of experience. We are customer focused and driven. Our goal is simply to help you lower your drilling costs and increase your bottom line, the power to drill more for less.

Drifter

Model:...........Sandvik HL300 (other options available)

Percussion:.......8 kW (10.73 hp)

Weight:.............94 kg (207lbs)

Hole Range:.........35mm - 64mm (1-3/8” – 2.5”)

Hole Depth: .....15m (50’)

Attachment & feed assembly

Feed Beam: ..........High Tensile steel

Drill Guides:.................Adjustable & replaceable bronze

Drill Travel:..................Heavy duty chain & hydraulic drive motor

Steel Length:....................3700mm (12’) maximum length

Hose Control:.............Drifter mounted hanger, travels with drifter

Centralizer:...Hydraulic with replaceable hardened bushings

Feed Swing:...................40° by hydraulic cylinder

Feed Dump: ..................180° Carrier bucket cylinder

Mounting:......................Quick attach bucket mount on boom stick

Storage: .........................Built in stand

Weight:.......................816kg (1,800lbs)

DTH drill Model HP-90 PF
Designed as the natural evolution of a range that is committed to excellence, this rig is used in the execution of previous holes cut with diamond wire is provided with hammer tallante mouth thoroughly with a diameter of 90 mm and hydraulic drive.

Fast and Powerful Drilling.
Night Work Lamps.
Hydraulic Jaw System,
Keyless Pipe Removal and Installation.
Easy Installation Works 3-4 Times Faster Compared to Drilling.
One Person Usage Ability.
Italian Walking System (Crawler). 5 TONS
Double Engine (Diesel - Electric).
Drilling Using Dual Motors - Walking.
Engine Type ↔ Electric - Diesel (Dual Engine)
DIESEL ENGINE ; 4 Cylinders Air Cooled 55 kw 80 hp DEUTZ
ELECTRIC MOTOR 22 kw 30 hp
Gun Left Right Rotation ↔ Hydromotor Gun
Forward and Reverse ↔ Hydromotor - Transmission Boost
Machine Back and forth ↔ Italian 6 TON Crawler Walking
Drilling Speed ​​↔ 2 m / 6 -10 Min. (6-10 Bar)
Drilling Diameter: Between 85 mm - 100 mm
Air Consumption ↔ 2.1 m³ - 4.5 m³ (6-10 Bar)
Tower Angle ↔ Horizontal - Vertical - Parallel - Angled
Total Weight ↔ 5.900 Kg
Usage ↔ Balancing - Boom Sliding - Slide Slide - Vertical Slide Pistons - Tower Rotation System and Disassembly Jaws,
Length ↔ 6 m.
Width ↔ 2.1 m.
Height ↔ 2 m.
Supplied Accessory ↔ 2 mt 14+1 Pcs. Pipe / PERVOL GUN

Slim Drill Machine LD4 Description Pneumatically Operated Drill Capable Of Drilling In Both Down The Hole Jack Hammer Modes-Ideally Suitable For Drilling Lead Holes For Diamond Wire Cutting Of Decorative Marble, Granite Rocks, Etc. The Machine Has Been Specially Designed For Precision Drilling Of Matching Holes And The Ability To Drill Holes In Both Vertical And Horizontal Positions. A Ball Joint Is Provided At The Bottom Of The Mast To Facilitate Precision Alignment For Matching Holes. Provided With One Spike Two Anchoring Rods Adjusting Screws To Maintain Perfect Rigidity During Drilling. Light In Weight, The Machine Can Be Easily Dismantled Into Four Subassemblies-Each Weighings Not More Than 50 Kg – Thus Ensuring Easy Portability And Repositioning. Supplier And Dealer Of All Typer Of Rock Drilling Equipment In India, Telangana, Andhra Pradesh, Hyderabad, Ongole. Rock Drilling” Has Always Been An Arduous Task And In The Above Context-We Take Pleasure In Introducing “MINCON” Rock Drilling Equipments. Mincon Rock Drills Is A Manufacturer Of Rock Drilling Equipment, Committed To Providing The World Drillers With Drilling Rigs Of The Highest Standards. It Is Through Continuous Research And Development That We Are Able To Bring Our Customers The Very Best That Is Available To Complete The Most Difficult Drilling Tasks In The Toughest Conditions.

PRD TRACTOR MOUNTED PILING & DRILLING RIG
Application :
Piling
Water well Rig ( DTH )
Auger Drilling
Rotary Drilling Rig
Solar Piling
Pole Drill Assembly Rig

Optional Attachment - Top Winch, Centrifugal Mud Pump, RC Drilling, Core Drill, Geo Technical Drilling.

Ref.: 48
Column Down the Hole Machine suited to the triangulation process for passing the diamond wire. Allows vertical, horizontal and inclined drilling. Drilling travel of 2000 mm. All components are easy to handle. Quick start-up. Separate rod and central platform.

Handy Maxidrill is a hydraulic drilling mobile unit, totally independent, and suitable for vertical drilling on any inclined and in any type of rock.
Some of its important characteristics are: two chain feed slides for drifters, sliding block and truck made in self-lubricating composite material, fast system steel retainer,anti jamming device, hydraulic device for inclinations regulator, radio remote control panel and water or air drain drilling.

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Ünite Motoru / Engine Unit 7.5 KW, 10 Hp, 1500 dev/dak Elektrikli / (Rpm) with Elektricity Sağ Sol Dönüş Motoru / Right-Left Rotation Engine Hidrolik Motor / Hydraulic Engine Aşağı Yukarı Hareket Motoru / Forward-Backward Movement Engine Hidrolik Motor / Hydraulic Engine Delme Boyu / Drilling Length Sapmadan 15 m/30 m Delme Kapasitesi / 15 m/30 m Drilling Capacity with No Deviation Delme Hızı / Drilling Length 1metre / 3-5 dak. - 1 m. / 3-5 min. Delme Çapı / Drilling Diameter 90 mm Hava Tüketimi / Air Consumption 2.1 m3 / dak (6 Bar Basınçta) - 2.1 m3 / min. (6 Bar pressure) Tij Boyu / Tij Lenght 100 cm 10 Adet - 100 cm / 10 Piece Matkap Ucu / Drilling Bit Hava Tabancası Bit ile Birlikte 1 Adet / Air Gun with Bit 1 Piece Çalışma Tipi / Operation type Sağa Sola Hareket Hidrolik Kontrollü/ Right and Left Movements are Hydraulic Control Aşağı Yukarı Hareket Hidrolik Kontrollü/Up and Down Controls are Hydraulic Control Verilen Aksesuarlar / Accessories 2 Ad. Anahtar, 3 Ad. Gergi Zinciri ve Aparatları, 1 Ad. Yağdanlık, 10 Ad. Boru, 1 Ad. Hava Tab. Boru Sehpası, 4 Ad. 10’ar Metre Hidrolik Hortumları,1 Ad. 10 Metre Hava Hortumu 2 Piece Wrench, 3 Piece Tension Chains and Accecories, 1 Piece Lubricator, 10 Piece Bits, 1 Piece Air Gun Bit Stand, 4 Piece Hydraulic Hoses 10 m, 1 Piece 10 Meter Air Hose Makinanın Net Ağırlığı / Weight 115 kg. Makine Ekipmanları ile Birlikte Ağırlığı Machine Weight With Equipments 450 kg. / Total 450 kg.

MAGNUS 90 Drill
The Drilling Machine has the function of drilling into any stone to pass the diamond wire. It is an autonomous machine. It is adaptable to various types of soil. Allows vertical, horizontal and inclined drilling.
You can place your order or request a quote through our contacts.

Slim Drill Machine LD4 Description Pneumatically Operated Drill Capable Of Drilling In Both Down The Hole Jack Hammer Modes-Ideally Suitable For Drilling Lead Holes For Diamond Wire Cutting Of Decorative Marble, Granite Rocks, Etc. The Machine Has Been Specially Designed For Precision Drilling Of Matching Holes And The Ability To Drill Holes In Both Vertical And Horizontal Positions. A Ball Joint Is Provided At The Bottom Of The Mast To Facilitate Precision Alignment For Matching Holes. Provided With One Spike Two Anchoring Rods Adjusting Screws To Maintain Perfect Rigidity During Drilling. Light In Weight, The Machine Can Be Easily Dismantled Into Four Subassemblies-Each Weighings Not More Than 50 Kg – Thus Ensuring Easy Portability And Repositioning. Supplier And Dealer Of All Typer Of Rock Drilling Equipment In India, Telangana, Andhra Pradesh, Hyderabad, Ongole. Rock Drilling” Has Always Been An Arduous Task And In The Above Context-We Take Pleasure In Introducing “MINCON” Rock Drilling Equipments. Mincon Rock Drills Is A Manufacturer Of Rock Drilling Equipment, Committed To Providing The World Drillers With Drilling Rigs Of The Highest Standards. It Is Through Continuous Research And Development That We Are Able To Bring Our Customers The Very Best That Is Available To Complete The Most Difficult Drilling Tasks In The Toughest Conditions.

Ref.: 48
Column Down the Hole Machine suited to the triangulation process for passing the diamond wire. Allows vertical, horizontal and inclined drilling. Drilling travel of 2000 mm. All components are easy to handle. Quick start-up. Separate rod and central platform.