If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Categories:
Stone Block Cutting Machines (7)
Stone Slab Cutting Machines (42)
Stone Tile Cutting Machines (21)
Stone Surface Processing Machines (2)
Resin Line Machines (2)
Stone Finishing, Profiling Machines (35)
Stone Factory Cleaning Equipments (9)
Stone Handling, Loading Machines (14)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
Machinery Function Features:
High accuracy sawing machine to work high-thickness blocks (marble, granite or general stones).
The high power transmission as well as the motorized sliding accuracy on X-axis are granted by linear guides with ball bearings units (endless screw).
Movements speed managed by inverter; washable PVC protective caps for transmission units.
Cast iron based side supports and working head to ease vibration while working.
Centralized lubrication system, water tank with filter and pump.
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Brio can be used completly in a manual mode, or can follow a range of automatic programs including single, multiple or orthogonal cuts. Inclined, oblique, or a combination of inclined and oblique, when directed, the machine can take step cuts in the direction of the blades axis by moving all the axis in an interpolated mode without the need for a rotating table. The Brio also has the ability to follow a series of cuts dictated by a dxf file and thus transform raw slab into finished sizes with almost no operator presence. The Brio can drill, carve or carry out lettering on request. The standard version it is supplied to be installed on concrete or carpentry shoulder support. The shoulder and the machine cutting table are optional and not included in the machine price.
Full 5 axis interpolation with rotating head from 0°-370°, and tilting head fully automated (0°-90°).
Max blade size 625 mm (25 in) with Z axis (rise and fall movement) 400 mm (15,6 in).
Fast and precise movements due to brushless motors with absolute encoders, recirculating ball bearing movement, precision gearboxes and interpolated axis from the CNC.
Electro spindle running up to 4500 rpm (6000 on request) with centre waterfeed and a 36x2 or ½ gas fitting (on request).
Suspended pendant with 15” TFT colour touchscreen. Machine is equipped with USB/Ethernet port for easy loading of programs. Stainless steel electrical panel.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our latest CNC model with 3 interpolated axes processes marble, granite, natural stones as well as synthetic and ceramic materials. The Gmatic 3000 CNC stone processing machine combines high quality and precision components with low maintenance and ease of use, typical of all our machines.
WHICH PROBLEM DOES IT SOLVE FOR THE STONE FABRICATOR?
Whether you work on benchtops or tombstones this CNC fabrication equipment represents the “smoothest” way to go from a manual to an automated machining, thanks to:
its accessible price
its pre-installed macros of the native software, that facilitate the “transition” for those used to work manually
its reduced footprint, suitable also for small-medium workshops
It can be the step to take on more orders, to expand your stone products mix and to manufacture more efficiently.
WHAT WILL YOU CREATE?
countertops
shower trays
bas-reliefs
funeral tablets/gravestones
commemorative plates
furniture
fireplace
inlays
STONE PROCESSING TYPES
milling, shaping, polishing, beveling
sink cut out
faucet holes
recessed drainers
draining flutes
engraving & writing
WHAT WILL YOU LOVE IN THIS CNC STONE ROUTER?
an innovative high speed chain transmission to moves the axes, that ensures long-lasting precision, zero maintenance and low noise Z axis driven by a steel wire-reinforced rubber belt (it guarantees an unmatched quality for inclined/recessed drain boards) nesting function allows to execute and to control more than one work order at a time double motorization (Gantry) on the Y axis quick and easy positioning of the stops and suction cup compatible with the most common graphic design software programs max safety and minimum noise level, thanks to the “closed” anti-intrusion structure
TECHNICAL DATA
Work table
- Work table: 2700 x 1200 mm made of pietra serena, calibrated by the machine itself
- Axis strokes: 3000 x 1500 x 280 mm
Framework
- Monobloc frame and bridge in processed steel protected by ceramic
- Footprint and weight: 4000 x 2500 x 1950 mm, 2500kg
Linear guides
- Tempered and passivated steel
- Linear guides with 4 rows of recirculating ball bearings
Operating head
- Electro spindle 5 kW (7HP)
- Max. RPM 13.800
- ISO 30 cones
- Nickel-plated spindle shaft
- Cooled by liquid
- 3 balls pincer
- Quick tool change
- Sensor to control coupling/uncoupling
Axis movements
- 4 brushless motors, 3,2 Nm torque
- Y axis with gantry control
Vacuum system
- Preinstalled vacuum distributor to supply 12 suction cups
- 2 high efficient vacuum Venturi system pumps require only simple maintenance
Control console
- 21.5” touch screen monitor, to keep under control any
parameter
- LAN and WIFI connection for remote assistance
- dedicated graphic card
- SSD hard disc
- Automatic back up to avoid data losses
- Own proprietary software GCAM 3D – developed to process marble and granite
- CAD-CAM 2D, supported by pre-installed macros to program quickly any process in an utmost simple way Laser
2 highly visible laser, to precisely position work pieces and suction cups
Power supply
- Electric: 400V 50/60 Hz three-phase (20A) or 220V 50/60 Hz three-phase (30A)
- Pneumatic: 10 bar pressure
- Compressed air: 300 l/min. A compressor of min. 4 kW with 500 l tank is recommended
- Water supply connection required (min. capacity 20 liters/min, pressure min. 2 bar)
Ghines
Italy
Ghines Group Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
Machinery Function Features:
2-axes sawing machine (X-Y) based on sturdy structure with cast iron supports and working head to ease vibration while working. Very easy to use and high accurate cutting operations up to 3200mm length.
Automatic sliding of the working unit and inverter for speed control, cut operations program, motorized vertical adjustment. Head tilt for 0°-45° cuts.
The working unit slides along a sturdy frame with linear guides for the best cutting accuracy.
Marine wood working bench with rolls, pneumatic lifting, water tank with nr.2 pumps.
Enzo D400A is a basic machine for any stone working company.
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Block Cutting MachinesMulti Wire Saw Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. It is made in different size models, in order to install from 20 up to 84 diamond wires. The machine is exclusively constructed on 4 columns, guaranteeing the best stability and cutting precision. The machine can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent tensioning of each diamond wire. The “triangle” structure allows the diamond wire to work only on 3 touching points, reducing to the minimum the stress of the wire during the work. The bigger diameters of the rollers and wheels, reduce the inclination angle of the diamond wire, extending so the life of the wire
BM
Italy
BM Officine Meccaniche S.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
Machinery Function Features:
Sawing machine especially suitable for small/medium-sized marble worshops.
Side supports and working head based on spheroidal graphite iron to avoid any vibrations.
The machine's bridge is fixed and the head can be tilted for cuts at a 45° angle, manual depth adjustment (motorized on request). Moreover, the working unit feed is motorized (adjustable speed) and slides on linear guides with rolls, the transmission is achieved by means of an endless screw. The machine is equipped with marine wood working bench.
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
FLYER is a loading/unloading flying robot designed to handle stone slabs (marble, granite, or stone material). It can realize the “book match” process, reassembling them as they where before loading, without using rotating roller conveyor.
By using this robot on resin lines it is possible the direct loading of the slabs onto the trays. This option is extremely important in case of fragile or fractured material.
FLYER can be supplied with GRAB system which allows, in cooperation with suction cups, safe loading of travertine slabs and fragile materials.
FLYER is a further step of Prometec loaders. It has been designed for such cases where the available space on the ground is really small.
FLYER for loading operation, (such as for all automatic Prometec loading machines), is equipped with a detaching device avoiding to load two or more “stuck” slabs. More over this machine uses, during the loading operation, a weighing system which reduces the risk for loading more than one slab at a time.
All the movements of FLYER are controlled by means of inverter and by encoder, therefore all movements are extremely smooth and exact. FLYER is a machine easy to set up for any kind of requirements by means of a wide colors touch screen.
Versions:
FLYER 1200: standard model capable to serve most of processing line with needed speed and safety
FLYER 54: version with increased number of suction cups designed for fragile and delicate materials typical in resin lines
FLYER 80: version with maximum number of suction cups and twin vacuum pump for special materials and applications
Prometec is anyway able to design and develop customized version accordingly with client requirements.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
PRODUCTIVITY AND FLEXIBILITY IN SMALL SPACES
The entire MISTRAL range sets the standard for automated systems for the storage and handling of sheets of marble, granite, quartz and ceramic.
All MISTRAL solutions are tailor made and designed to enhance company performance, optimising the level of automation, efficiency and operator safety whilst at the same time eliminating the risk of accidents due to incorrect handling.
Full integration with the cutting lines
Intermac offers a complete range of products for the storage and handling of sheets of natural, quartz and ceramic materials, offering real solutions for manufacturing needs.
The combination of Intermac and Movetro generates ideal solutions for every type of need.
Both the stand-alone and the automated in-line solutions are controlled by process optimisation software, and the result is a complete range including Movetro smart storage and handling systems, integrated with the Intermac Genius range of cutting tables. Intermac and Movetro glass machining technologies incorporate the key concepts of industry 4.0, propelling our customers into the era of digital manufacturing.
Intermac
Italy
Intermac Glass & Stone Division - Biesse Spa
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsAir Dust Collector
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
DUST EXTRACTION BENCHES for efficient dust suction
The stone* dust extraction benches represent a very efficient solution for stone fabricator shops.
All our dust benches are made of a sturdy non vibrating metal structure, carefully protected by ceramic and epoxy paint to ensure a long lifetime. The work surface is made up of strong and resistant timber planks.
Features:
High dust suction and suppression power: the combination of a powerful motor, a high pressure fan and state-of-the-art suppression technologies will strongly reduce the amount of dust in your laboratory.
Immediately operational and user-friendly: the installation does not require masonry works, just connect to the needed electrical, water or pneumatic supplies (according to the model).
Reduced maintenance: Except the fan, Ghines dust extraction benches do not have pumps, filters or mechanically moving parts, which reduces maintenance to a minimum and which guarantees also intensive use in the long term.
XAGUA is a water-system suction bench for air cleaning, it uses the water to wet the stone* dust and ceramic dust
How does it work?
An impressive suction effect all over the perimeter of the XAGUA guides the stone* dust effectively inside the machine, where it is captured by nebulized water drops. The created air flow is forced several times to change direction and the centrifugal forces abate the muddy particles into the tank. Drop separators with lamellar structure inside the dust extraction bench retain the humidity inside. The continuous water overflow takes out the dirty water from the bench.
The compact and sturdy metal structure, protected by ceramic and epoxy paint, together with galvanized steel plates and the pvc drop separators assure a low sound pressure and the investment in the long term.
* some limitation on materials may apply, depending by your country. Please contact us for more information
Ghines
Italy
Ghines Group Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
Machinery Function Features:
Sawing machine especially suitable for small/medium-sized marble worshops.
Side supports and working head based on spheroidal graphite iron to avoid any vibrations.
The machine's bridge is fixed and the head can be tilted for cuts at a 45° angle, manual depth adjustment (motorized on request). Moreover, the working unit feed is motorized (adjustable speed) and slides on linear guides with rolls, the transmission is achieved by means of an endless screw. The machine is equipped with marine wood working bench.
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Sandstone
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
WET CUT SLIDING COMPOUND MITER SAW CMS
PORTABLE BENCH SAW FOR STRAIGHT AND TILTED CUTS IN ALL DIRECTIONS
Wet cut sliding compound miter saw for straight, bevel, plunge and miter cuts in all directions. Study structure made of galvanized steel to cut all types of stone.
ADVANTAGES
Sliding compound miter saw for angle cutting in all directions:
Structure made of galvanized steel for a long lasting dependability;
Water tank with built-in recycling pump for blade cooling during cutting;
Swivelling head assembly from ±45 to 0 degree with positive locks at ±45, ±22.5 and 0 degree.
Achilli
Italy
Achilli s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The TWIN bridge saws are the right solution for the companies willing to reduce costs, cut-off downtime, and increase production capacity. Thanks to the patented system of benches exchange the bridge saws, ECHO TWIN and SPRINTER TWIN, allow to increase productivity of kitchen tops, floors and coverings up to 70%.
The Twin System consists of a double bench with automatic system of benches exchange, it lays on a rails-monoblock frame, on which the two benches are alternatively moving between cutting and unloading areas.
The operator can carry-out unloading, loading and programming operations on the 1st bench while the machine is working on the 2nd bench.
TWIN system advantages:
Increase of production capacity
Only 1 operator needed
2 saws in 1: possibility to use the machine for cutting (optimized with the advantages of the Twin System) and for shaping operations.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Assembling Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Machine to glue tiles, marble, any stones on paper net or fiber glass. The gluing is made by hand after that the operator will set the pieces into the trays, which will be supplied according to the mosaic drawing.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The TWIN bridge saws are the right solution for the companies willing to reduce costs, cut-off downtime, and increase production capacity. Thanks to the patented system of benches exchange the bridge saws, ECHO TWIN and SPRINTER TWIN, allow to increase productivity of kitchen tops, floors and coverings up to 70%.
The Twin System consists of a double bench with automatic system of benches exchange, it lays on a rails-monoblock frame, on which the two benches are alternatively moving between cutting and unloading areas.
The operator can carry-out unloading, loading and programming operations on the 1st bench while the machine is working on the 2nd bench.
TWIN system advantages:
Increase of production capacity
Only 1 operator needed
2 saws in 1: possibility to use the machine for cutting (optimized with the advantages of the Twin System) and for shaping operations.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Fully interpolated 6 axis movement with rotating head with 370° range, inclination from 0-120°.
Hot dipped galvanized non rotating table with variable height saw surface in either wood, high density plastic or rubber matting (optional) with max blade size of 1300 mm (51 in) with inverter drive Z axis (rise and fall movement) 1300 mm (51 in) or 1600 mm (63 in) or 2000 mm (78.7 in).
The principle sections of the machine are made from solid cast with ancillary parts made up of hot dipped galvanized steel structures - supplied with folding door solid panel safety barriers.
Fast and precise movements due to brushless motors with absolute encoders, recirculating ball bearing movement, precision gearboxes and interpolated axis from the CNC.
Electro spindle running up to 6000 rpm with centre waterfeed and a 36x2 or ½ gas fitting. Or (on request) ISO40/50 cone fitting running at up to 8000 rpm for automatic tool change.
Suspended pendant with 15” TFT colour touchscreen. Machine is equipped with USB port for easy loading of programs. Stainless steel electrical panel.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single.
For high production sawing up to thirteen axes.
Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°.
Independent tool wear control and compensation for each blade.
Accurate and fast thanks to brushless motors and to linear bearing guides.
Extreme precision cutting result due the rotating top cutting unit, the material doesn’t need to be shifted or re-aligned.
Automatic nesting of the cutting piece on board with defect track, due the use of and external camera, the cutting performance are guarantee from the easy to use software and the GMM patented vacuum installed on the central unit.
Ability to load electronic cutting sheet.
The machine performs automatically parallel cut, arcs and pieces shift by vacuum for allowing blade overruns.
Compact cutting line solution when equipped with automatic loading device and roller belt feeding system. Large production result up to 490 sq/m in 8 hours.
OPTIONAL
Nesting.
Camera on board.
Parametric program.
Vacuum system.
Robotic loader.
Automatic load carrier.
Motorized roller unit.
Short conveyor belt for cutting.
Short conveyor belt for unload.
Drying fun.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesMulti Blade Automatic Slab Cutting Line
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SX-3 is an innovative numerical control multi-spindle cutting centre with three cutting units with interpolated axes, designed and patented by Donatoni Macchine to satisfy those needing a compact system for large-scale production line of marble, granite and agglomerate flooring and wall coverings of various types with different sizes and thickness.
Donatoni Macchine were the first to introduce a multi-spindle machine with patented rotating bridge to the market and, rich in the experience they have built up over the years, they can guarantee their customers a very high level of productivity and at the same time complete optimisation of the slabs.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MINI BRIDGE SAW TFM
STONE SAW WITH FIXED BRIDGE FOR STONE, QUARTZ AND CERAMIC SLABS
Monoblock saw with fixed bridge for stone and sintered material slabs equipped with a compressed, rectified and chromed “active beam” guaranteeing the utmost accuracy. The worktable extensions widen the worktable facilitating the positioning of large slabs and the head feed is motorized with variable speed adjustment in both directions. A special optional device permits to carry out parallel cuts.
ADVANTAGES
TFM is an extremely sturdy bridge saw, suitable to cut also thick stone slabs:
Customizable according to customer requirements;
Equipped with a special design beam providing the utmost accuracy;
Optional PLC control unit for step-cut programming;
Extremely accurate cutting on stone, ceramic, quartz and sintered materials;
Motorized head motion with variable speed on X axis in both directions.
Achilli
Italy
Achilli s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH :
4 drilling units for horizontal holes
2 vertical milling machines for hole pocket
2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, and rebated kerf (with shaped wheel), QM (bevel cut)
The machine features:
2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
2 cutting units for the pocket placed above two drilling units on each side of the machine
2 cutting units for slot/kerf placed above two drilling units on each side of the machine
2 mechanical stops to hold the slab in position during processing
MACHINE SPECIFICATIONS
Slab max width: 188 cm
Slab min width: 26 cm
Max distance between 2 holes:
160 cm (without vertical milling machines) 130 cm (with vertical milling machines)
Min distance between 2 holes without pocket:20 cm
Slab conveying carts
Slab conveying carts are made up of two traverse beams along which two beams equipped with motor- operated slab conveyors move. The width of each beam can be adjusted to process slabs of different sizes.
The width can be adjusted manually by using a small wheel. The carts move along chrome-plated bars with precision bushes.
Each cart also features a slab guide and an end stop pneumatically operated in order to process the slab when it is not moving (holes and hole pockets).
The back/forth motion of the slab conveyors can be selected from the electric panel.
With forward motion, the slab enters and exits from the opposite end. With backward motion, the processed slab is brought back to its starting point in order to be discharged.
Drilling units
By means of a small wheel, four drilling units, two on each side of the machine, can be manually placed longitudinally on two chrome-plated bars of large diameter the whole length of the machine.
Holes are made when the slab is not moving and held in position by means of two guides and two mechanical stops.
The drilling units are pneumatically operated by means of a hydraulic brake.
Feeding has two speeds:
the first allows for slow penetration of the points into the slab until the points are guided by the hole itself
the second allows for drilling at optimum speed. Return stroke is always at high speed
Return stroke is always at high speed.
One or more spindles can be excluded from processing by selecting them on the operator’s touch screen.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
HIGH-PRESSURE WATERJET SYSTEMS
The Intec-G2® can cut almost any material to 8” thick at maximum cutting speed with minimum capital outlay. These machines last longer and require less maintenance, while delivering an easy to use, fast and accurate system at a very competitive price. This series of machines is particularly well-suited for stone industry.
Softec™ Waterjet Cutting Software has been developed by TECHNI Waterjet™ with two very clear goals in mind:
1. To cut parts at minimum cost with the greatest accuracy.
2. To have a simple and intuitive interface with the operator.
The result is a comprehensive “All In One” Windows based software, that is specifically designed for Waterjet Cutting, which maximizes productivity and anyone with PC experience can learn to use quickly and easily.
At the “Heart” of Softec™ is Tru-Cut Technology™, a highly sophisticated algorithms database that determines the optimum cutting speeds and machine ramping characteristics. Once you select the material to be cut, it’s thickness and surface edge finish required, the computer will take care of the rest, ensuring the minimum cutting time for any given part. Programming edges for mitering within seconds. All with one software!
Softec Nest utilizes advance nesting algorithms which have been developed by one of the world’s largest and most awarded CAD and nesting software developers - Geometric Global.
Benefits Include:
Improves profitability by minimising rapid feed times.
Increasing both nesting speed and material yield.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
QUADRIX XL 1600 is a 5 interpolated axes CNC working centre with Z axis stroke of 1000mm, rotating blade head swiveling from 0 to +180 degrees and tilting from 0 to 90 degrees, to perform orthogonal cuts up to 635mm, ideal machine for performing oblique, circular, elliptical cuts, two-dimensional and three-dimensional digging and carving of blocks.
The "Top" version can use diamond tools such as: milling wheels, drill cores, horizontal blade.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesGiant Disc Bridge Saw Machine
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Sandstone, Travertine
Machinery Function Features:
4 columns block cutter machine for cutting marble, travertine and limestone blocks into strips by means of one or more vertical discs and a horizontal disc. It works on stationary block.
M586 is available in several versions according to the vertical disc maximum diameter (from 1300 to 1700 mm), the cutting system and the main motor power. It can be equipped with automatic or semi-automatic unloaders.
Pedrini M586 block cutter is the result of the technological evolution deriving from the manufacturing of more than 2000 models and includes all the necessary characteristics for the production of strips by means of diamond discs.
M586 stands out for its versatility in the cutting of blocks with various dimension and with more or less regular and squared shapes.
The building semplicity, the simple use and the flexibility of every single model of M586 allow for the easy interchange and substitution of diamond discs.
During the cutting phases the diamond discs are cooled ith water by means of distributors designed to ensure their perfect lubrification.
M586 manufacturing technologies allow for the utilization of an up to 220 HP vertical disc motors, making profit of the whole installed power to achieve the maximum cutting speed.
The 4 columns producing the up and down Y axis movement are solidly anchored to the foundations and are stiffened at the top through three connecting beams.
Two reinforcing ribs allow to have the frontal part open to facilitate the usage of the various strips unloading systems and the possible loading of the block directly inside the machine, on the ground level.
The columns house the low friction precision screws, which are synchronized through three shafts that connect the angle transmissions placed on each column. These screws operate into lead nuts mode in antifriction alloy fixed onto the sliders, which travel along the guides that are directly machined onto columns structure.
All lead nuts are equipped with a drop safety system that activates when these are worn.
The bridge movement on Z axis from right to left takes place on two movable beams fixed on the up and down sliders.The translation movement of the bridge is machined on the upper part of the beams by sliding on an anti-wear rollers cage to facilitate the side sliding.
The bridge, built in large thickness normalized steel work with honeycomb structure, houses the transmission for the right-left movement and it is composed of a connection shaft driven through a gear motor/pinion/rack system.
The exclusive double “V” guides which drive the disc holder trolley in a constant and linear way along the cutting and return strokes X axis, are machined onto the upper part of the bridge. A series of oil pits ensure the “V” guides lubrication during the cutting and return stroke movement.
Pedrini
Italy
Pedrini S.p.a. ad Unico Socio
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
The JET 625 CNC is a simple and compact 5 interpolated axis numeric control bridge saw, conceived for the production of kitchen and bathroom countertops, shower trays, different kinds of claddings for building industry, made in marble, granite and artificial stone.
Extremely flexible, it offers the possibility carry-out a wide range of processes; the accessories and optionals available with the machine allow to have a fully-automated process, to reduce processing times and to increase productivity. Transport and installation are simple and fast thanks to the monobloc-frame system and to the small dimensions specifically designed to make all there operations easier.
JET 625, as all Donatoni products, is designed to offer maximum quality and reliability over time.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesBlock Turnover-Tilting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Standard block carriages on railway for any use.
Used with single and multiple wire diamond wire saws, for 40 or 60 ton blocks.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The 1 INT/0 boasts the quality of solidity, precision and cutting capacity of SIMEC’s products but its characteristic is the non-automatic running of work. With the 1 INT/O the operator manually and easily selects the cutting dimension to be done with the help of different stop bars and starts the run of the motorized spindle.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge saw for the production of tombstone art, buildings and paving stones. The cast iron sturdy and asymmetric structure allows to supervise the cutting area in a handy position outside the machine.
A PLC with large dimension touch-screen control panel manages the cutting parameters cycle. The turning table is motorized and, on demand, it can be tilting.
Numeric control bridge saw for cutting and shaping marble and granite
This aesthetically beautiful and avant-garde machine has been engineered for the construction of building elements and the manufacturing of furniture and Tombstone art elements.
The numeric control is handled by an industrial PC. The automatic cycles are easily programmed by touch screen from a colour monitor.
The tool-holder head can perform step cutting even in 0°/90° tilted positions. Perfect movements control allow for processing by spatula.
Owing to the adjustment system on all guides, the M940CN maintains the original precision unaltered in time.
The cast iron asymmetrical structure allows for easy supervision of the machine work field from the ground and from a safe outer position.
The peculiar triangular closed section and the internal ribbing provide the bridge with greater resistance when compared to traditional bridges of equal weight and length with “U” type open section.
The transversal movement mechanisms are housed in the very large shoulders section. The rack/pinion systems are equipped with devices for the continuous clearance recovery which guarantee precision in the movements.
The guides for bridge transversal stroke are effectively protected with special guards, against dust and water coming from any direction.
In the powerful trolley assembly, the slides, that are driven through precision screws, slide along prismatic guides with very large holding base.
Clearance adjustment easy to use devices allow for original precision holding in time.
Tool holder head inclination is adjustable from 0° to 90° with pneumatic locking system in any position.
Trolley, that is driven through a rack/pinion system, slides along two hardened, ground, chrome plated large diameter rods.
The rods are fixed at different levels onto bridge distant edges to allow for a very large trolley holding base, not reasonably possible with traditional guiding systems.
Owing to this guiding system, trolley reacts effectively not only to horizontal and vertical stress but also, specifically, to transversal stress that is particularly high in case of shaped tools and “spatula“ processing.
Pedrini
Italy
Pedrini S.p.a. ad Unico Socio
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic cycle multi-disc cross cutting machine for marble or granite strips to produce serial elements with finished length. M747 is available in two main versions to cut strips with up to 2000 mm or 3500 mm length capacity. The number of discs is varying from 5 to 12.
M747 can be also equipped with a wide range of optional for the discs displacement and for big thickness strips cutting.
Pedrini
Italy
Pedrini S.p.a. ad Unico Socio
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Factory Cleaning EquipmentsWater Treatment Equipment
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The system of the IDF 100 model allows the cleaning and recycling of waste water from the working processes such as cutting, profiling and finishing.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
ATS 350 Semi-automatic single or double cross cutting machine for marble and granite.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic single or double cross cutting machine for marble and granite.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Pendulum single disc cross cutting machine for marble and granite
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
ATM 1500-2500-3500 Multiple cross-cutting machine for marble and granite
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Longitudinal cutting machines, very sturdy and reliable that can cut strips wide up to 50 mm (60 RAF). These longitudinal cutting machines are available in manual or sequential versions. Spindles fitted are 1 to 3 and can cut thickness up to 40 mm for granite and 60 mm for marble in a single pass.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesConnecting Roller Conveyors
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Roller benches for the conveyance of marble and granite strips and elements. The roller benches are manufactured with various lengths and different distances between the rollers according to strips sizes. Steel work structure, rollers manufactured in thermoplastic material and stainless steel shafts. The rollers can be idle or motorized and are driven through chains
Pedrini
Italy
Pedrini S.p.a. ad Unico Socio
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SLV
Automatic loader-unloader for marble and granite strips.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesConnecting Roller Conveyors
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
LONG TRANSPORTATION BELT FOR CUT AND UNLOAD AREA, fitted with belt washing system , fitted with parts infeed/outfeed parts photocell system and safety mechanical stop for outfeed plates, including 45 °transportation trestle.
SHORT CONVEYOR BELT FOR UNLOAD, fits final formats of small and medium, fitted with parts outfeed photocells system and safety mechanical stop for outfeed plates, including 45 °transportation trestle.
Short conveyor belt for CUTTING area, complete with ribbon washing system, complete with injector photocell system, including 45 ° transport stand.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MTS is the new automatic machine for multiple linear cutting with diamond discs. Suitable for cutting single-fired, double-fired, porcelain tiles, marble, granite, glass and bricks.
Maximum cutting width 650 cm.
MTS is available also in the jolly version (45°)
StarLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesConnecting Roller Conveyors
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EXCHANGER OF SLAB HOLDER BEDS fast system featuring moving table tops to load/unload slabs. System consists of a trolley to tilt the table top which holds the slab to be processed from vertical to horizontal; running on rails, it is loaded onto the table of the saw and automatically unloads from the machine the other table top with the cut pieces and moving it in the unloading area. Maximum thickness of the plates cm. 5. In the order - please specify if the entrance should be from the side RIGHT or LEFT.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesAutomatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic loaders/unloaders for strips. SIMEC manufactures automatic loaders/unloaders for strips or tiles capable of feeding high-productivity polishing plants. The translation speed of the suction cup carrying arm along with a powerful vacuum system assures fluid and accurate movements and frequency of material loading capacity to meet any production requirement.
SIMEC
Italy
Simec S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Italy
Jet Machinery
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios H625 is a 5-axis bridge saws, perfect for cutting large sizes and big thickness of stones. The bridge structure of the machines can be mounted on concrete or on galvanized carpentry structure, according to customer’s needs. The saws can be equipped with a tilting table, which allows the easy loading of the pieces and the Photoscan system, which is helpful for an interactive use of the machine. The Photoscan is a slabs scanner, a measuring system, and a template reader, which allows to start the cutting process just a click away. This series of bridge saws is very strong, performing, and precise.
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Italy
Used Stone Machines
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Block Cutting MachinesMulti Blade Gang Saw
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Onyx, Artificial Stone, Sandstone, Travertine
Machinery Function Features:
Multiblade (80 and 100) gang-saw to cut marble blocks into slabs from min. 15 mm. thickness up.
Italy
Micheletti Macchine By Kwezi S.r.l.
Contact Supplier
Have a Question? Ask our expert
Ask now
