If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
FOB Price:$5000-55000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Our Hydraulic stone splitting machine is suitable for splitting all types of natural and artificial stones, cube stone/curb stone/wall stone/blockstone/tiles/pavingstone/countertops/vanity tops.
It has floating teeth up and down,we also called it individual chisels which can maHydraulic stone splitting machine tch the natural surface of the stones perfectly.
Every splitting machine can be integrated in a production line, especially designed according to your needs.
The main characters of our machines are:
1. The electrical control cabinet adopt the French Schneider, with internal layout reasonable and neat, and through the senor switch to facilitate rapid signal to make the movements of the machine consecutive and accurate.
2.The hydraulic system adopts from German Bosch Rexroth, providing sustainable,stable and sufficient power to the machine.
3.With intelligent gear cutting head, itcould adjust itself according to the smooth condition of the stone surface.
4. We can design a good quality stone cutting line from blocks to paving stone, wall stone, mosaic, cobble stone, etc, upon the demand of customers
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
HEAD CUTTING MACHINE ( CROSS CUTTING MACHINE )
•Working Width: 680 mm
•Working Thicknes : 10 - 100 mm
•Disc Diameter: 350 - 450 mm
•Motor Power: 7,5 kW
•Bridge Motor Power: 0,75 kW
•Total Motor Power: 8,25 kW
•Water Consumption: 120 lt / min
•Machine Dimensions ( W / L / H ): 2150 / 3380 / 1700 mm
•Machine Weight : 1200 Kgs
•Roler Conveyor
•Linear Guide Movement
•Double Electric Panel
Turkey
Grotto Group
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EM11 - Trimming Line
• Number Of Cutting Discs: 4
• Diameter of Disc: 350 mm
• Working Thickness: 10 – 60 mm
• Length Cutting Belt Width: 700 mm
• Length Cutting Working Width: 650 mm
• Sizing Belt Width: 1300 mm
• Sizing Working Width: 1200 mm
• Minimum Working Width: 100 mm
• Cutting Head Motor Power: 4 x 7,5 kW
• Head Movement Motor Power: 2 x 0,55 kW
• Belt Motor Power: 2 x 0,75 kW
• Rotator Motor Power: 0,55 kW
• Rotator Width: 1200 mm
• Total Electric Power: 34 kW
• Machine Dimensions ( W / L / H ): 2200 / 9500 / 2000 mm
• PLC Automatic Sizing Setting
• Pneumatic Piston Pusher
• Pneumatic Miter
https://ekizoglumakina.com/en/product/trimming-line-em11
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
FOB Price:€15000-19000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Hydrotek srls
Italy
Hydrotek srls
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
2 roller conveyor, which makes loading easy and support the work piece.
Two load support brackets containing adjustable stops which allow for quick, accurate repeat cuts.
Incorporated in the M 2000 are wheels and rollers for effortless single-handed loading and transportation of the saw.
Tilting bridge from 90°to 45°to carry out bevel cutting.
Water tank with recycling pump.
Manual depth adjustment of cutting head by hand wheel.
Stainless steel measuring tape fixed to table and conveyor. Total length 1540mm (60")
AARDWOLF
Viet Nam
AARDWOLF
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing strips of marble with a width from 150 to 460 mm into two parts. and a thickness from 20 to 100 mm.
Guglielmi Macchine
Italy
Guglielmi Macchine Marmi e Graniti srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
Saw Diameter Ø 400450 mm
Number of Saws 1 Piece
Saw Motor Power 7.5 kW / 11 kW
Saw Driving Power 1.5 kW
Maximum Cutting Width 800 mm
Minimum Cutting Thickness 10 mm
Maximum Cutting Thickness 80 mm
Width 1500 mm
Length 4400 mm
Height 2400mm
Weight 1250 kg
Ka Makina
Turkey
KA MACHINERY
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
$10000-20000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Specifications
1. Wet type mosaic cutting machine is suitable for cutting big floor and wall tiles into narrow, square and diamond forms.
2. Wet type mosaic Cutting Machine also can cut tiles into many small ones with different width at one time.Wet type mosaic cutting machine cut wall & floor tile, high cutting efficiency
3. Wet Type Mosaic Cutting Machine is cutting big wall and floor tiles into small ones including mosaic. The processing width of wet type ceramic tile Cutting Machine is 25-600mm.
4. Wet type mosaic Cutting Machine also can precut tile first and then cut off at last.
5. Due to reasonable design and high working precision, it has the advantage of high cutting efficiency, high precision and high production.
Applications:
Shaft Cutting Machine is suitable for cut or slotting floor tile and stone, It can cut tile into narrow, Square, Diamond and so on. Can process the tile from 25-600/800mm to different size in one time. The characteristic of this machine is high accuracy, Low broken, Big output.
Feature
1. The bearing in bearing box is use water-cooling device to make the bearing not hot after long time use, Delay the bearing is life.
2. Use high quality bearing supporting the front and behind of the main shaft to make the shaft drive with more high precision.
3. Add manual adjust device in the operative panel to make is driver it more easy.
4. Cantilever type structure make the machine drive steady with low failure rate.
CKD
China
FOSHAN CHUANGKINGDA MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
High Precision !This machine is a sensitive automatic cutting machine for stone and precision of the machine is +- 0,20 mm.The most impotant thing is that you dont need an operator in cutting process.
Zimek
Turkey
Zimek Machine Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
$2500-5500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Rough edges white marble wall stone strips chopping machine
Specifications:
Splitting force: 12 tons
Max. Splitting width 240mm
Max. Splitting thickness...100mm
Size: 500*600*1600 mm
Net weight: 210kg
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
DOUBLE - HEAD CERAMIC CUTTING MACHINE
•Working Width: 650 mm
•Belt Width: 700 mm
•Working Thicknes: 12 mm
•Number Of Head : 2
•Disc Diameter: 300 mm
•Cuting Motor Power: 11 kW
•Up & Down Motor Power: 0,37 kW
•Belt Motor Power: 0,75 kW
•Belt Speed: 0,75 m / min
•Water Consumption: 80 lt / min
•Machine Dimensions ( W / L / H ): 2000 / 3000 / 1980 mm
•Machine Weight : 1790 Kgs
Turkey
Grotto Group
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$6900-7900
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SYJ series uses the joint structure; the main head can rotate 180 degrees and be electrically moving up and down. The whole machine has a compact structure, fine appearance, stable functions and high processing precision, which suits for edge cutting and milling of small slates, lath and thick tiles
Faithful Machinery
China
Quanzhou Faithful Machinery Co.,Ltd
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The stone bench saws ITC AL are ideal for the construction sector and for everyone who needs to move their machinery often. Professional wet saw, very light and resistant to corrosive processes, thanks to their structure in aluminium. Solid, precise and versatile they are adaptable to cutting all materials (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 Ø400 mm. Available in single-phase or three-phase version.
Stone bench saws equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in aluminium, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: goniometer fence, instruction manual, set of wrenches.
OPTIONALS: multilayer marine plywood (phenolic) work surface, diamond blades, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, lateral fence, machine with structure for blades of Ø450 Ø500 mm, precision laser, side stop, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.
ITC
Italy
ITC Italian Top Class GS S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
€20000-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Manual table cutting/milling machine type: “A 500”
Machine complete With:
- Sliding worktable with length 250 cms. manually actioned.
- Max cutting length 300 cm
- Length of under table 500 cm
- Spindle motor HP 10
- Max diameter diamond disk ? 500 mm.
- Manual spindle lifting/lowering of 30 cm
- Manual spindle traverse of 75 cm
- Manual tilting spindlE 0-90°
- CE Electric and water plant.
- Operation and control devices.
- Worktable, spindle and column, cast-iron made totally.
MORDENTI
Italy
MORDENTI EXPORT S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
$18145-18145
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
Hydraulic Natural Stone Splitting machine
It suitable for saw cut splitting and natural-face splitting
Kingshun Machinery
China
Xiamen Mastone Equipment Co.,Ltd
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Travertine
Machinery Function Features:
Este - Cross Cutting Machine, Strip Cutting, Edge Trimming Machine
Tuto Mermer
Tuto Mermer Dis Tic Ltd Sti.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Tecnical Data:
Disc Diameter: 450 mm
Min/Max Cutting Width: 650 mm
Min/Max Cutting Thickness: 60 mm
Disc Motor Power: 7,5/10 kw/hp
Reducer Motor Power: 0,75/1 kw/hp
Total Electric Power: 9/12 kw/hp
Overall Dimensions: 4000/1800/2100 mm
Machine Weight: 1250 kg
Nemar Makina
Turkey
Nemar Makina
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
• Working Width *Optional: 100-500 mm
• Working Height: 10-300 mm
• Hydraulic Motor Power: 11 kW
• Working Pressure: 280 bar
• Hydraulic Tank Capacity: 400 lt
• Machine Dimensions (W / L / H): 1500 / 2500 / 2840 mm
• Double Hydraulic Hammering
• Manuel Pedal Crushing
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
€33700-33700
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The DLQ 700H45 stone cutting machine with a bridge design, is designed to cut stone slabs to a specific dimension. The machine features a programmable logic controller and interpolated axes. An accessible interface combined with high-precision positioning of the rotary encoder and infrared device ensures excellent cutting quality and repeatability. The work table is rotatable and tilting. The cutting head can bevel at a 45° angle. We can work with single-cut as well as multi-cut. The main spare parts of the machine are made of high-quality materials. As a result, the whole machine has high cutting performance, high precision cutting, stability, easy operation. It is possible to install a disc with a diameter of 700mm.
Did you know?
We provide warranty and post-warranty service and spare parts. We will organize the transportation of the machine (priced individually) and install the machine and provide training for you and your employees. As one of the few machine suppliers we mill the working table.
Dianormet
Poland
Dianormet Machinery
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
$5000-55000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Quartzite, Sandstone
Machinery Function Features:
320t stone splitting machine. Hydraulic operated stone splitting machines can be used for every kind of stone. The machinery is primarily designed for processing natural-face stone, kerb stone, small building stone, border stone, paving stone, wall stone, semi-finished products of small cube stone, etc.
BESTLINK
China
XIAMEN BESTLINK FACTORY CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Description:
Technical Specifications Model:
Working Width 10 - 200 mm
Working Thickness 50 – 120 mm
Belt/Roller Width 300 mm
Motor Power 2,2 kW
Stroke Lenght 500 mm
Machine Dimensions ( W / L / H ) 1800 / 1100 / 1950 mm
Machine Color Yellow and Gray
Machine Weight 900 Kg
Made in Turkey
Turkey
Grotto Group
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Slab Trimming Machine, Multi Disc Cutting Machine and Dimensioning Line -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$1880-2800
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
This machine is an automatic control stone cutting machine. It is designed to provide professional cutting effects for all kinds of stones, ceramics and bricks. This machine is with simple but steady structure, built-in water pump for dust free operation, easy installation and operation without site restriction. Auxiliary work table on both sides enhanced machine extensibility. Solid bearing steel guide rail ensures high performance and precision. Stainless steel work table and thickened machine body guarantee durability and long service life. Wide range cutting purposes and 45 degree bevel cutting effect made this machine the best solution for small and medium cutting requirements.
OMC
China
Laizhou Oriental Machinery Co., Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Igloo stone splitter is an open frame machine model, highly productive, simple to maintain, an ideal solution for your quarries and the best choice as cubes splitting machine. Splitting machine models range from 160-640mm in blade length and 20 -180 tons of splitting pressure. All models are supplied with a highly efficient hydraulic unit using only the best performing hydraulic components. The Igloo machines are designed for splitting hard material in continuous use and are well known throughout the world for their resilience and precision processing hard stone. These machines are used to split granite, limestone, sandstone, slate, porphyry and many other types of natural stone products.
The Igloo 160, 240 and 320 models are used for the production of split paving, cubes and natural stone tiles. The Igloo 400, 480 and 640 for wall stones and large cubes, whilst the Igloo 500 and 600 for split kerbstone, large wall stones and as primary machines in a configured splitting line for the production of various split natural stone products.
High production, low cost stone cobble splitting machine. Our Igloo stone splitters come with various options including conveyors, feeders, hoppers and manipulators to both improve productivity and optimize safety. All Igloo splitters can be configured in Steinex production lines as primary or secondary splitters depending on the model and desired final product.
Steinex
Italy
Steinex S.r.l
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
€18500-18500
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Completely rebuilt and upgraded splitting machine for tiles of marble, travertine, tufa and other stones.
Model: SPALERI INOX31
The machine is ready to work three consecutive shifts, for 50,000 running meters, assuming proper lubrication.
The machine was stripped down to its last piece and then rebuilt and upgraded using only its existing chassis:
Upgraded with the installation of the following systems:
Stainless Conveyor belt tensioning system +
Stainless Bearings of tension system +
Stainless Conveyor Belt Fixing Bolts +
Stainless Cutting disc fixing screws +
Cutting Head Bearings: Special low noise + bearings
5mm thick monoblock steel cutting head cover for permanent waterproofing +
Electric or manual Adjustment of cutting heads with precision division system +
Anti-slip belt, 3+2 layers, German+ certified +
3-layer epoxy anti-rust treatment, on all four sides of each metal piece and all directly on perfectly clean metal +
Cutting with two special German WATT electric motors characterized by high torque at low speeds
Internal anti-vibration base on each of the two cutting heads.
Vibration-free operation for producing ultra-thin (6mm, 8mm, 10mm, 12mm) or very thick tiles (80mm), without breaking +
Maximum processing width (cm): 31 +
Maximum processing thickness (cm): 8 +
Main processing engines: Two (2), Power of each engine: 15 KW +
Total power (KW): 31 +
Total weight (Kg): 850 +
Quality category: Italian top category +
Year of rebuild and upgrade: 2023 +
TUV / CE + approved
Attention A: The electrical panel, control panel and electrical installation of each machine are new and installed after receiving the order for security reasons against theft.
Attention B: The machine is located in our factory in Bulgaria, 10km from Promachon, at the entrance of the town of Katuntsi, 500 meters before Farmatech.
Attention C: The machine is ready to work three shifts continuously for 50,000 meters, assuming proper lubrication. It is about the most productive and quality machine of its category.
Attention D: The machine is delivered in 25 working days after receiving the advance payment. Any inspection by the customer is accepted.
Attention Q: Note: Spalieri and SPL are registered trademarks of Spalieri S.p.A +
arpes - vranas
Greece
ORAMA LITHOS
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$2288-
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
motor with 230V power supply with a capacity of 2.0 kW or 400V power of 2.9 kW, 2,800 revs / min.
Mobile ideal saw for work on construction and renovation areas
customer
by a system of folding legs and quick release head for easy transportation
in the car combi
very simple to operate rail to cut 45%
long-lived 12 - bearing sliding head
galvanized worktable
integrated water pump 40
height-adjustable cutting head to discs 250 mm and 300 mm
-25.4 shaft diameter mm
Maximum cutting depth of 80 mm
maximum cutting length of 150 cm
reinforced cutting head rail 2 x 60 mm x 60 mm
**Cena netto: PLN 6.950,00, - dostawa z fabryki do odbiorcy w Polsce
Porsfeld Lukasz Pikul
Poland
Porsfeld Lukasz Pikul
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Technosplit 220 Ton multitooth complete line (machine+hopper+conveyour belt+accesories)
Model TS 100/140X40
Stone Expert S.r.l.
Italy
Stone Expert S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
C RANGE stone splitting machines
The C RANGE stone splitting machines combine perfectly with our entire conveyor belt range. Loading material onto the conveyor belt not only makes the job easier and renders the operator more autonomous , but also assists the operator in maintaining the correct working posture. The conveyor belt controls are positioned for easy access on the stone splitting machine
Splitting heights: from 170 mm to 650 mm
Length of blades: from 160 mm to 840 mm
Splitting force: from 24 tons to 200 tons
So called due to it's shape ( or "swan-necked") , these machines are manufactured with a special open frame structure whereby the operator, positioned at the front, can work directly on the stone to be split.
MEC
Italy
MEC s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
TMC/1 - MULTIPLE AUTOMATIC CUTTING MACHINE WITH 1 HEAD
PATENTED
Automatic machine for cuts, antislip incisions, pre-cut and special cut such as: mosaic, triangle, rombhus. Able to work with marble, granite, gres porcellanato, agglomerated, brick and single-double firing.
ADVANTAGES OF TMC SYSTEM
- On the shaft of motor-spindle it is possible to mount till 4 cutting blades, divided by spacers and flanges, in order to obtain different sizes and multiple cuts contemporarly.
- The motorized conveyor belt improves the working quality and allows the production of pieces continuously.
- The guide positioned on motor side and the pressor bar guarantee, during working phase, a strong stability and an high level of finishing piece.
- All adjustments are facilitated by the use of handwheels and they do not require the use of tools.
- A lateral roller allows to lay the big sizes to be worked.
SPECIAL EQUIPMENT FOR MOSAIC CUTTING:
On the shaft of motor-spindle it is possible to mount a mosaic kit with 11 cutting blades in order to obtain mosaics on a maximum thickness of 9 mm.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
CONSTRUCTION OF VAULTS, ARCHWAY AND CORNICES MACHINES
The machine has 3 settings, detailed as follows:
1) the first setting is provided with milling helical cutter with a diameter up to 5-6 mm, tilt in degrees, for the realization of the ribs of ashlars and, providing proper knives, for the realization of the frames;
2) the second setting is provided with diamond blade tiltable with 800 mm diameter for the cutting of the blocks in degrees;
3) the third setting is provided with helical cutter of 800 mm tiltable for the camber of ashlars use closing time.
Officine Carlino Fernando
Italy
Officine Carlino Fernando
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone
Machinery Function Features:
650 MM DIAMOND DISC
230 VOLT
4HP
26-40 MAX CUTTING DEPTH
40-80 MAX CUTTING LENGHT
100 MADE IN ITALY
GHELFI SRL
Italy
GHELFI SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone
Machinery Function Features:
Cross cutting machine Suprax, model SL 1600
SUPRAX
Ref number: 04-011
Saw Suprax. Easy saw with close water circulation. The saw can cut in angle. Bridge construction welded in high kind of steel. Travel of the bridge on cogged slats. Bath is inside of the table. Manual support with fetter gear and handle. Manual go down.
Lenght of cutting: 2000 mm
Length x width of machine: 2930 x 1000 mm
Height of the table: 770 mm
Weight: 425 kg
Motor power:
(on request power: 3 kW for extra payment) 2,2 kW
Rotation: 2800 UpM
Depth of cutting
disc 300 mm:
disc 250 mm:
80 mm
55 mm
Power supply: 220V/50Hz
Mechanical travel of support on request (with power of motor: 037 kW with controle speed from 0,5 to 6,0 meters/min Mitsubishi) – for extra payment
Guarantee: 12 months.
Delivery: 4-6 weeks.
Saw with 1 edge table. Second edge table - for extra payment.
Available saw Suprax, model: SL 1600
PPHU Mazurski
Poland
PPHU Mazurski
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Kamhan Industrial Limited
Pakistan
Kamhan Industrial Limited
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Cutting machine for the industry of the marble and granite with operation of the car for transmission of steering wheel and gears.
Talleres Iglesias
Spain
Talleres Iglesias
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Machinery Function Features:
- Designed for precision cutting, arcing nature and artificial stone.
- Advanced by arc depth to accurately control the cutting angle either at 45° or 135°.
- Cutting length capacity is up to 59 inches (1500).
- Light weight design helps with easy direction change and transportation.
- Water cooling system prevent damage to the blade and the materials.
Abaco Machines
Viet Nam
Abaco Machines
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
Multi-touch 7” display provides easy to use, allow to perform, sideways, The tilting head from 0 ° to 90 ° angea cutting, Pneumatic air system. The optional tilting work table with hydraulic pump promotes slab loading, speeding up the production process.
Merkon Machine
Turkey
Merkon Machine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$2300-2350
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MK Serie is a marble, granite, glass, brick, hard and soft stone transverse and lengthwise cutting multipurpose machine.
MK serie is portable with all parts demountable.
Main frame of the machine is the water tank.
By the help of recycling system, pulverized water allows fast and easy cutting and prolongs the diamond saw life.
Between 90° and 45° cutting and groowing feature.
SEN-MAK Koll.
Turkey
SEN-MAK Koll.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
KONMAK
Turkey
KONMAK
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
KONMAK MARBLE MACHINERY
Turkey
KONMAK MARBLE MACHINERY
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesStrip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
Tile Cutting, Trimming Machine
CMK Makine
Turkey
CMK Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesConnecting Roller Conveyors
€16500-35000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The RT 100 is a straight rotary table that is used under format saws. Rigid welded construction, precision machined and hot-dip galvanized. The top of the table is fitted with waterproof plywood and cover mats are installed on the lower part to protect the lower part of the table. There are stops on the side of the table for precise positioning of the blank relative to the cut.
Czech Republic
KVK Robotix
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
$4900-5000
Warranty: 12 Months
Usage: Granite, Marble, Limestone
Machinery Function Features:
SY-S81,whose oil pump is installed above the machine and this creates a good airproof result that protects the oil pump from stone dust. The machine’s oil tank is enlarged, equipped with quality engine exported to overseas and front-door lock design which is convenient for repairing and maintenance. lt has a good apperance, longevity and manual handle gives a safe operation.
China
FuJian WanLong Diamond Tools CO,.LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c
Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c
Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200
Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200
Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200
Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200
Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Spain
Nodosafer S.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMitre Saw, Edge Cutting Machine
$795-1550
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
This stone cutting machine is widely used in construction, decoration and other industries, especially for construction engineering, stone processing, building materials construction site, for stone, marble, firebrick, trail brick, blind road brick professional cutting.
Product Features:
300/350mm diamond saw blades can be used according to customer requirements.
The nose can be rotated at an Angle of 45 degrees to ensure that customers are chamfered.
Customers can choose 220V or 380V models according to their needs, and equipped with 220V or 380V models waterproof switch.
Automatic water-bearing operation in cutting construction.
Widely used in construction, decoration and other industries, especially for construction engineering, stone processing, building materials construction site.
This stone cutting machine for stone, marble, firebrick, trail brick, blind road brick to provide professional cutting.
China
Zest Machine
Contact Supplier
Have a Question? Ask our expert
Ask now
