Limestone Tile Cutting Machines

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 650 mm
Çalışma Kalınlığı / Working Thickness 8/60 mm
Ebatlı Kesim Uzunluğu / Cut to Size Length 1750 mm
Testere Motoru / Saw Engine 7,5 kw
Testere Çapı / Saw Diameter 350 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 0,75 kw
Toplam Güç Tüketimi / Total Power Consumption 8,25 kw
Ebatlar / Dimensions 3750 x160 x1200 mm
Ağırlık / Weight 1300 kg

Compared with ESAB,Miller, OTC,Lincoln Electric, our features：TOPtek Laser is an innovative high-tech company focusing on handheld laser welding solutions. Adhering to the deep professional ability, numerical control system, high-speed transmission system and other core technologies, we are committed to providing high-quality welding solutions to customers in various industries around the world.
After decades of development, the company has become a modern high-tech enterprise integrating research and development, sales, production and service.

It is our Monoblock Machine mounted on a steel frame. Resistant Flawless Cutting Accuracy Unique Design.
All Steel Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System
RAIL SYSTEM IS DONE WITH OPEN AND CLOSED MANUFACTURING BY REQUEST.
Our machine is with Slide Movement (Up Down) / Reducer
Our machine is with Slide Movement (Y axis) / Reducer
Our machine is WAGON Movement (X axis) / Manual
Our machine has 45 DEGREES cutting feature.
Machine Slide System is the Linerr Guiding System Preferred for CNC Use.

WHAT IS HORIZONTAL SPLITTING MACHINE IS?
Marble industry, the horizontal plates of the horizontal splitting machine known as ST two separate sheets making a cutting machines.Horizontal splitting machines are used in the process and with a maximum thickness of 160 mm to 630 mm wide strips. Splitting machine is different by the number of discs that perform the cutting operation designs can be seen.
In general, 2, 4, 6 and 8 can now be horizontal splitting machines with horizontal splitting drive. Horizontal splitting machines, marble tile production machines are also known as yield-enhancing features. In particular, the tiles produced in facilities, in order to minimize errors that may occur in the process of cutting ST, and also in order to avoid production errors that may occur during loading and unloading machinery used in the design.

Technical characteristics
The SNIC Edge Trimmer mounts two spindles which remain in a fixed position and trim the slab from both sides as it is conveyed forwards on rollers.
The spindles which travel along guides mounted to the cross-beam are positioned manually or as an optional accessory a motorized screw assembly can be fitted for automatic spindle positioning operations.
The digital display shows the operator the width between the disks.
The hardness of the material determines the feed speed of the belt that can be electronically adjusted from 0 to 5 m/min.

Bridge saw ITC AAS with motorized advancement of the cutting head (with inverter for regulation of advancement speed). Toothed belt transmission. The single beam system (in aluminium) and the reinforced structure make this saw very tough, compact and precise. Devised and designed for marble-works. Perfect for cutting natural stone, marble, granite, Grès porcelain stoneware, bricks and brickwork. Inclination of the bridge from 90° to 0° by means of reduction gear (on the right hand side of the machine). The innovative system of inclination at 0° means that you can also work in the horizontal, making it possible to use a drilling kit. This accessory allows the operator to realize boring holes (maximum 80 mm) in paving tiles, marble and granite. Adjustment of cutting depth is by means of a flywheel above the motor unit. Designed to function with blades of Ø300 Ø350 Ø400 Ø450 mm. Available in single-phase or three-phase version.
The work surface, in multilayer marine plywood (phenolic), ensures stability, resistance to bending, resistance to water and damp.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in sheet metal, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Detachable legs to facilitate transport.
ACCESSORIES SUPPLIED: electrical switchboard, extension side roller table 100×50 cm, instruction manual, lateral fence, set of wrenches, side stop.
OPTIONALS: raised structure for using blade of Ø450 o Ø500 mm, diamond blades, drilling kit, extension side table in sheet metal 55×45 cm, goniometer fence, motor for adjustment of cutting depth, precision laser, speed reducer of the cutting motor, supplementary side table with rollers 100×50 cm / 150×50 cm / 200×50 cm, three-phase 4KW motor. Grinding wheels for half-bullnose edge

WORKSHOP TYPE 4 AXIS MACHINE

Electrically operated machine used for the rustication (bugnatura) of any stone type.Due to the machine's solid and robust structure and ease of operation, this model is perfectly suited to the constant and intense use associated with working hard material and is suitable for any type of stone.

The Portick is suitable for cutting marble, granite or similar material.
Peripheral speed can be adjusted using inverters
Saw trolley is moveable, on rail length 6500 mm and is electric driven

The advantage of using this machine
1. Very accurate cutting of 45°, much better than what bridge cutters can do.
2. The X- axis cutting speed is adjustable. Therefore nearly all kinds of materials can be processed.
3. No width limitation of the slab to be cut, Even the narrowest strips can be cut thanks to the pneumatic pistons holding the slab.
4. Designed with slab“face down”, it allows performing perfect 45°cut even on un-calibrated slabs.
5. The table's liftable rollers help move slabs smoothly, up/down driven by pneumatic pistons.
6. it is safe and easy to use. Maintenance is very simple.

* Cutting course 3400 mm.
* Saw Diameter 350-400- mm.
* Saw engine 7.5 / kv 1400/2800
* Wagon movement / Manual
* Wagon dimensions are 3000 x 1300 mm.
* Up and down motor 0.75 kv
* Reciprocating motor 0.75 kv
* Slide action / FORWARD BACK Liner Slide
* Steel Npu Chassis
* Machine length - 5500 mm.
* Machine width 2500 mm.
* Machine height 2000 mm.
* Approximate weight 2000 kg. - 2300 kg.
* Wagon manual
* Total Required Power 10 KW
* Required Water Flow 8 Lt./Min.
* 45 degree cut is with flywheel reductor
It is our Monoblock Machine mounted on a steel frame. Resistant Flawless Cutting Accuracy Unique Design.
All Steel Used on the Side Cutting Machine with Wagon, Anti-Rust Epoxy Paint Reinforcement, Special Transmission Rail System
RAIL SYSTEM IS DONE WITH OPEN AND CLOSED MANUFACTURING BY REQUEST.
Our machine is with Slide Movement (Up Down) / Reducer
Our machine is with Slide Movement (Y axis) / Reducer
Our machine is WAGON Movement (X axis) / Manual
Our machine has 45 DEGREES cutting feature.
Machine Slide System is the Linear Guiding System Preferred for CNC Use.
Marble Side Cutting

Layered stones splitting machine (horizontal splitting)
more info at: http://gestracz.com/our-machines/layered-stone-splitting-machines/

MRF is the new automatic trimmer for cutting in a single movement marble, granite, natural stone and ceramic.
The trimming machine is composed of a conveyor belt and two discs with adjustable trimming sizes, in width and in height, by a manual handwheel.
To optimize cutting, according to the thickness and type of material to be processed, the speed of the conveyor belt can be adjusted through the variator.
The MRF is also equipped with a lateral guidance system and upper pressure that allows you to guide the material in the cutting phase, ensuring quality production, low operating costs with minimal space and the use of unskilled personnel, thanks to the ease of use.

Garcia Ramos's cutting line is a complete and reliable group of machines to produce quality tiles.
The 350mm disc can cut tiles or a stack of tiles 70mm thick.
The line is equipped with turnover tables with motorized rollers and belts to move the tiles.
The controlled positioning system of the cutting machines guarantees the quality of the finished product.

Cutting machine multidisc with one axle HRG-60. Make one-pass cuts to different types of materials, thicknesses and sizes. Ref. 8701
Cutting machine multidisc with one axle HRG-60
The HERSEN HRG-60 multi-disc cutter is designed to perform longitudinal cutting in a single pass of different types of materials, thicknesses and sizes. In this way we can obtain baseboards, skirting boards, cut samples or recover material with stability and precision.
The material to be cut is placed on the conveyor belt, and with a guide to keep the material aligned during the cutting process.
The disc holder shaft allows us to install several discs and separate them to different sizes to obtain different width measures in the pieces. Equipped with a powerful belt driven motor (not direct drive).
It has motorized vertical regulation to adjust the depth in the cut, diameter and wear of the disc during the cutting process.

Cross Cutting Machine for marble,travertine

MK Serie is a marble, granite, glass, brick, hard and soft stone transverse and lengthwise cutting multipurpose machine.
MK serie is portable with all parts demountable.
Main frame of the machine is the water tank.
By the help of recycling system, pulverized water allows fast and easy cutting and prolongs the diamond saw life.
Between 90° and 45° cutting and groowing feature.

Horizontal Splitting Machine

Marble industry, the horizontal plates of the horizontal splitting machine known as ST two separate sheets making a cutting machines.Horizontal splitting machines are used in the process and with a maximum thickness of 160 mm to 630 mm wide strips. Splitting machine is different by the number of discs that perform the cutting operation designs can be seen.

In general, 2, 4, 6 and 8 can now be horizontal splitting machines with horizontal splitting drive. Horizontal splitting machines, marble tile production machines are also known as yield-enhancing features. In particular, the tiles produced in facilities, in order to minimize errors that may occur in the process of cutting ST, and also in order to avoid production errors that may occur during loading and unloading machinery used in the design.

MULTIPLE CUTTING MACHINE
TECHNICIAL SPECIFICATIONS
Cutting Engine Power 22/30 kw
Cutting Engine Speed 2800 rpm
Band Motor Power 0,55 kw
Belt Speed 65 cm / min
Saw Lowering / Lifting Motor Power 0,18 kw
Press Up Down Motor Power 0,18 kw
Maximum Cutting Width 650 mm
Minimum Cutting Width 50 mm
Maximum Cutting Thickness 120 mm
Minimum Cutting Thickness 10 mm
Saw Diameter 250-350 mm
Number of Saws Min: 2 / Max: 13 pcs
Control System Manuel Button PLC optional
Miter System Available
Water Consumption 60 liters / min
Machine Dimensions (width - length - height) 2100 - 3550 - 2000 mm
Machine Weight 1500 kg
Machine dimensions can be changed according to customer demand.

General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.

The ITC ST is top of the range stone bench saws for construction sector. Their structure in stainless steel ensures maximum resistance to corrosive processes and atmospheric agent. Long lasting wet saws, very solid and precise; they are suitable for cutting all types of material (Grès porcelain stone-wares, bricks, items in concrete, brickworks, natural stones, marbles and granites). The head runs on chrome-plated guides by means of linear recirculating ball bearings with anti-dust protection. Manual inclination of the bridge for cuts from 90° to 45°. Adjustment of the depth of the cut is with a flywheel set above the motor unit. They are designed to work with blades of Ø250 Ø300 Ø350 Ø400 mm. Available in single-phase or three-phase version.
Equipped with a cooling system for the cutting disc: a pump for the circulation of water, positioned within the collection tank, allows water to flow onto the disc for cooling. The tank, in stainless steel, is completely welded to structural reinforcements that guarantee maximum resistance to torsion/bending. The tank is emptied by opening the draining cap. Folding legs to facilitate transport.
ACCESSORIES SUPPLIED: instruction manual, set of wrenches, side stop.
OPTIONALS: multilayer marine plywood (phenolic) work surface, diamond blade, extension side roller table 100×50 cm / 150×50 cm / 200×50 cm, extension side table in sheet-metal 55×45 cm, goniometer fence, lateral fence, machine with structure for blades of Ø450 Ø500 mm, precision laser, three-phase motor for models 800 – 1000 – 1200, wheel kit for transport.

the CNC cutting machine can cutting and after cutting can do small chamfering for tile edge, cutting size can CNC control, have fast speed, small error, Easy Operation

The HD-1 type single axis cutting machine, with one pass, allows the longitudinal cutting of strips and tiles, trimmed after the polishing line; to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
allows the longitudinal cutting of strips and tiles, finding today application in various sectors and processing phases: to cut after the finished line to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
Technical characteristics:
It is built with a single shaft for diamond discs;
Ensures quick replacement of both the complete removable disk sleeve, which of each individual disk, thanks to the front opening and upper part of the structure and the particular construction of the spindle;
It is equipped with spacers between the disc and the disc to measure cuts to execute;
It has a support surface made of motorized thick rubber tape, with adjustable advance speed according to thickness and type of material to be cut;
It works by motor / spindle with belt transmission, with the possibility of speed variation; It guarantees a perfect longitudinal cutting precision by particular lateral guides of the conveyor belt;
It has the motor of the shaft of the disc holder positioned so that as much as possible protected from any waste from processing and melting of water, guaranteeing safety, durability and reliability;
It allows the raising and lowering of the spindle support bridge to adjust the depth of cut, to compensate the diameter of the wear of the diamond discs;
It is completed with a wide adjustable lateral material guide bar, equipped, in the insertion part, with clamps that hold the material adhered to the belt and pressed against the guide bar;
Gives the operator complete control of the controls (spindle support lock, disc depth adjustment, guide bar positioning).

Manual Table Cutting/milling Machine For Marble Slabs, Tiles

General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.

Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.

The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.

The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.

One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .

By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.

The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.

HEAD CUT SIZING MACHINE
Machine Dimensions (mm) 4000x2000x1500
Cutting head movement (mm) 800
Maximum Saw Size (mm) / 400
Saw Speed (rpm) 1400/2900
Saw Engine Power (kW) 9 kw Installed Power (kW) 1
Machine Weight (kg) 1800

Cutting machine multidisc HR-2
Ref. 8704
The HR-2 type cutting machine performs a single pass longitudinal cut to materials of different thicknesses and different sizes.
By having 2 axes it allows cutting high thicknesses.

TRM 600 Multi-Blade Cross-Cutter, Strip Cutting, Edge Trimming Machine

Parallel cutting multiheads HLS
Ref. 8601
HLS multi-head parallel machine has high precision and waste reduction.
Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing.
The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.

Parallel cutting with independent heads HR4
Ref. 8602
The Parallel cutting machine type HR4 is designed for the longitudinal cutting of a single pass of strips and tiles, this machine regulates the distance between the discs guaranteeing maximum flexibility in the change of measures.

Our cutting line N.2990/2200-6+9C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the
horizontal stacker and positioned waiting to enter the production line in such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 6 heads on mobile bridge N.8000-L-6C and the transversal cutter with 9 heads N.8000-T-9C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with
precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception Suction Cup, of particular design, is made up of a rectangular plate, capable of supporting
horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-6+9C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Longitudinal cutter with 6 Ø600 heads and mobile bridge, model N.8000-L-6C.
– 1 Transversal cutter with 9 Ø600 heads and mobile bridge, model N.8000-T-9C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS BRIDGE CUTTER N.8000-L-600-6C

Characteristic Specification
Machine width 4220mm
Raceway length 6000mm
Max separation between discs 1-6 2200mm (interior)
min separation between discs 1-2-3-4-5-6 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (6)
Total installed power 100 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS BRIDGE CUTTER N.8000-T-600-9C

Characteristic Specification
Machine width 5370mm
Raceway length 5500mm
Max separation between discs 1-9 3500mm (indoors)
min separation between discs 1-2-3-4-5-6-7-8-9 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (8)
Total installed power 150 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS OF CUTTING TABLES WITH BELT N.2304/2200

Characteristic Specification
table width 2960mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 11.5m/min
Drive motor power 3 hp
CHARACTERISTICS OF ROLLER TABLE WITH SELECTION STOPS N.2590/2200

Characteristic Specification
table width 2930mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2930mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 5m/min
Motor power after cross 2.5 hp
CHARACTERISTICS OF MOTORIZED BELT TABLES N.2426/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 2 hp
CHARACTERISTICS LOADING TROLLEY N.1289-V

Characteristic Specification
table dimensions 1880×3200mm
Frame dimensions 2560×1140mm
vacuum center 30 m3/h / 1.35 hp
Hydraulic power plant 4 hp
Carriage advance motor power 0.75 hp
Table motor power 0.50CV
speed scrolling cart 5m/min
speed displacement pins 7.5m/min
width max. worked 2200mm
CHARACTERISTICS ROBOT-MANIPULATOR N-3530

Characteristic Specification
Max load capacity 120 kg.
min format of work 300x300mm
vacuum center 100m3/h
Installed potency. 25 hp
cycle time min. 10” sec

General Characteristics
The SNM-CCE is a mono-block crosscutting machine with a single diamond blade that transforms slabs cut on the block-cutter into tiles of desired length.
The main structure is made of heavy-duty steel, and the disk is directly mounted on the motor.
A brushless AC motor with inverter powers the forward and return movements of the head.
When cutting the last few millimeters, the machine will automatically reduce its speed in order to guarantee a perfect edge.
Electric cables and tubes for tool cooling are supported by nylon cable holding chains.

Universal arm milling machine – sawing machine Mod. CF 250B: machine suitable for making lengthways cuts on marble and granite. The heavy structure consists of: galvanized base with runners for sliding bench for length of 5200 mm in oil bath and covered by painted sheet metal casing; cast iron bench (length 250 mm, width 750 mm, with shelves 1550 mm); manual bench sliding back-forth by way of rack and pinion coupling operated by handwheel; large cast iron disc holder spindle; up-down movement of motorized disc by way of reducer-electric motor coupling and worm screw; disc holder spindle manually tiltable from 0° to 60° to make angled cuts; reading of rotation angle on measure; manual lubrication, through oiling points, on screws, scrolls and sliding guides; machine complete with electrical system with suspended keyboard.
TECHNICAL DATA
maximum bench stroke 2500 mm
horizontal spindle movement 740 mm
vertical spindle movement 450 mm
spindle rotation 0-60°
spindle motor power 15 Hp, speed 1450 rpm
power of translation motor 0.25 kW
power of motor for upward and downward movement 0.75 kW
max. thickness of cut (marble-granite) 140 mm
max. dimensions of machinable slab 3000 x 1250 mm
max. disc diameter 500 mm
dimensions of bench with shelf 2500x1540 mm
length under bench 5240 mm
max. distance of disc to column 1050 mm
dimensions 5440x2165x(h)2180 mm
max. overall dimensions 6450 mm
net weight of machine 3300 Kg
OPTIONALS
stainless steel rail caps, disc cap and belt protection
stainless steel electrical panel
multiple greasing
table motor drive including inverter with option of manual use
numerical control to carry out automatic machining cycles with programmed cutting measurements and touchscreen profile design
inverter - 11KW/15Hp
inverter - 15KW/20Hp
motor - 15KW/20Hp
tiltable square device
installation, commissioning and training in Italy

Parallel cutting with two heads HFL-2
Ref. 8603
HFL linear cutting machines are for single pass strip and tile slitting with a manual positioning system.
They are designed to cut extremely hard materials (porphyry, slate) and have also found many applications in the marble and granite sector.

- The powerful Ausavina Stone Saw MODS1 features a 3HP motor and guided by dual linear bearings on induction hardened chrome bar (avoid rusting). MODS1 is suitable for construction sites as well as workshops. It is incorporated with wheels and rollers for effortless single-handed transport. MODS1 features an electric drive submersible water pump.
- Bolted down casted aluminum working tables.

Igloo stone splitting machines are strong, versatile and above all fast. They are outstanding for the speed with which they can produce large quantities of split stone.
Today they are used to split all types of stone. Their design makes them perfect to produce a variety of cobbles, sett pavings and wall stones. Igloo stone splitters maybe smaller than other Steinex machines but theyare strong and resilient.
They are extremely simple to operate and cope well the constant stresses associated with working hard stone for long periods, even when operating in the toughest conditions.
Each Igloo machine is equipped with a low noise hydraulic unit.

Native of Staight cutting, Cross cutting respectively two kinds of work to finish the whole production line cutting effect, the characteristics of cutting effect og high precision, fast speed,simple operation, high output, of about 90 square meters per hour, high qutomation, less manpower. Electrical system adopt the PLC computer control, operation panel man-machine interface touch screen to operate.

JNMC-600 Manual Cutting Machine/Hand Stone Cutter
Features:
1. The table can walk on two rails;
2. 360° rotating table for flexible cutting;
3. Suitable for cutting tombstones, square sinks, strips, tiles, etc.

SQA-600 Hand Swaying Edge Cutting Machine uses jointed structure; the main head can rotate 180 degree and electric up and down.The whole machine has compact structure, fine appearance, stable functions and high processing precision, which suit for edge cutting and milling of small slates, lath and thick ties.

HEAD CUT SIZING MACHINE
Machine Dimensions (mm) 4000x2000x1500
Cutting head movement (mm) 800
Maximum Saw Size (mm) / 400
Saw Speed (rpm) 1400/2900
Saw Engine Power (kW) 9 kw Installed Power (kW) 1
Machine Weight (kg) 1800