Sandstone Factory Machines in Spain

Basic bridge cutter which allows carrying out any kind of cut to sheets and any other non-thick piece.
It stands out because of its great versatility, agility and ease-of-use and this way it guarantees a high production rate.
It can optionally add cut programs to make complex and frequent jobs easier (kitchen programs, cut programs to 0o and 90o,…)
Examples of some applications:
It cuts bath and kitchen counters, floor tiles, skirtings and other specific pieces.

Thanks to its special features and the manufacturer′s quality and guarantee, Bevelling machine GR-CH is a highly versatile and effective device.
The two 10hp engines equipped with discs of 350 or 450mm, can be rotated up to 90 degrees, allowing us to cut single or double mitres on any possible angle.
With horizontal discs we can bevel the edge or cut tiles in two

Slot/Kerf and drilling machine for cladding products KERF-2
Ref. 8503
The KERF-2 machine grooves and perforates coating products. It can have different finishes such as:
Kerf I continue
Kerf Reduced
Slot
Vertical drill
Horizontal drill
Incision

Bridge Image CNC cutter: equipped with high technology that allows high-precision and fast cuts.
Machine of easy placement and assembly that allows its rapid transfer, also occupying a reduced space.
The Image CNC Cutter allows the complete quartering of boards with great precision and speed, since its CNC control manages the sequence of all the movements and cuts of the process, reducing work time, both in its execution time and in its programming.

New Groover CNC of 12 axes for ventilated facades
HERSEN designs and manufactures special machinery, made to measure, for Large Format Porcelain, Porcelain Stoneware, Sintered Stone, Solid Surfaces, marbles and granites.
This automatic slotting machine makes incisions on the back of the pieces for the placement of the fixing system. In this case, for the STRONGFIX anchoring system. It is a 45 degree double groove in the shape of a dovetail. The aluminum profiles are inserted into these grooves and fixed to the piece with putty.
HERSEN has designed a router that performs a clean and precise cut, obtaining precise and defined incisions. It can slot parts from 100mm to 1600mm wide, which allows ENTIRE BOARDS to be slotted.
The material to be grooved enters through a motorized roller bed, and a controlled mobile guide correctly aligns the material before entering the machine and the heads begin to groove.
It is built with 6 motors installed on 3 bridges. Each bridge has an independent cutting head, composed of two motors with two discs, in this way it is possible to make 3 pairs of grooves at 45º at the same time and separated from each other to any size.
It performs the grooving both continuously and discontinuously. This discontinuous grooving makes it possible to groove parts where windows, doors or corner joints go without the grooving cut being seen by the edges. What makes the façade aesthetically improve and does not weaken the pieces by making unnecessary cuts.

It is also possible to build the machine for the transverse grooving of the board.
It has been equipped with an automatic control and measurement system for the wear of the diamond blades and the depth of the grooves to always obtain the desired measurement of the grooves. Another system automatically fans the diamond blades, optimizing the number of meters of cut and always allowing a clean cut in the incisions.
It has been implemented with custom made software to be able to manage the work orders and breakdowns of the architects. In this way, the execution of the pieces can be managed both from the machine and from the technical office. In this way, the pieces that are being made of each project and each facade are controlled at all times, as well as the pieces that still need to be done.

Equipped with high technology that allows high-precision and fast cuts. Machine of easy placement and assembly that allows its rapid transfer, also occupying a reduced space. The Europa CNC Cutter allows the complete quartering of boards with great precision and speed, since its CNC control manages the sequence of all the movements and cuts of the process, reducing work time, both in its execution time and in its programming

Characteristic Specification
NO MAXIMUM OF THREADS 39
WIRE DIAMETER (mm) 5.3
MACHINE HEIGHT (mt) 7.65
MACHINE LENGTH (mt) 11.40
MAXIMUM BLOCK LENGTH (mm) 3500
MAXIMUM BLOCK HEIGHT (mm) 2200
LENGTH OF WIRES (mt) 23.40
VERTICAL MACHINE TRAVEL (mm) 2400
FLYWHEEL DIAMETER (mm) 1800
MINIMUM CUTTING THICKNESS (mm) twenty-one
MAXIMUM CUTTING WIDTH (mm) 1003
DIAMOND WIRE SPEED (mt/sg) 0-40
MAIN MOTOR POWER (Kw) 185

Ideal600 Monoblock Bridge Saw. Machine with head rotation from 0º to 90º, to cut marble, granite, quartz and porcelain slabs. Ref. 8902
Bridge Saw Monoblock Ideal600
Ref. 8902 Technical characteristics:
One-piece self-supporting steel structure.
The structure does not need a foundation and is completely fixed to the ground.
Structure accompanied by tilting bench with wood and rubber surface.
Technical characteristics:
-Maximum cutting length (X axis): 3300mm
-Maximum cutting width (Y axis): 2000mm
-Max cutting thickness (Z axis): 150mm
-Max thickness cut to miter cut: 60mm
-Diameter of disc: minimum 400mm – maximum 600mm
-Max. Miter cut disc diameter: 400mm
-Diameter of disc shaft: 50mm
-Degrees of horizontal rotation of the head: Fixed positions of 0º / 90 °. This head does not interpolate.
-Table dimensions: 3200 × 2000 mm
-Tilt Table Tilt: 85 ° (Approx.)
-Manual table rotation 360 ° with locking of all positions
-Disk motor power: 15Kw
-Motor power (X axis): 2.2 Kw
-Motor power (Y axis): 1.5 Kw
-Power of the up / down motor (Z axis): 0.75 Kw
-Oil pump power 3Kw
-Total power: 23Kw
-Speed ​​of rotation of the disk motor 1440 rpm
-Required air pressure: 6 bar
-Weight of the machine 6500Kg
-Machine dimensions: 5800x3400x2300mm

The MEM AC-HV wire from Grani Roc is a machine designed for dressing and slabbing stone blocks. The machine is specially designed to cut horizontally but it can also cut vertically. The machine has an automatic wedging system that makes the horizontal cutting process completely automatic. To cut horizontally gives a higher productivity as well as a higher performance of the tool. Furthermore, a higher productivity is achieve due to the non existence of stop times in loading a loading operations as it happens in the conventional static machines.
·The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process.
· All the steel elements of the structure are subjected to a surface finishing consisting of a deep cleaning and degreasing treatment, a metallization treatment and corresponding protective layers and painting. These treatments enhance the durability of the machine against
aggressive weather and working conditions.
· The main motor is direct in the main pulley, and it is controlled by an electronic frequency variator –inverter-, that permits to apply progressive linear speed to the wire and its adjustment to optimize the behaviour and performance of the tool.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· The machine has an automatic wedging system which introduces the wedges into the block to be cut using the number of wedges pre-programmed by the operator in the control panel.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water.
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel, situated in the lateral part of the machine, has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.

HPCS-Polisher
Automatic strip polisher used to polish rough material, granite and marble surfaces.
There is a first zone which incorporates the gauging headstocks. The second one is provided with the polishing headstocks which have a swing movement in order to guarantee a good finish result.
This machine enjoys an accurate design. On the frontal part there is a strip with transparent components as well as the headstocks and strip controls so that the work which is being done can be comfortably controlled and seen.
Different models depending on the amount of headstocks and the material minimum width to be worked with. Its features can be modified according to every moments’needs.

Semi-automatic bridge cutter designed to cut boards to size. It can work with a wide range of materials including marble, granite, synthetics and artificial compact porcelain materials.
Thanks to its design and operating processes, the VICTORY NICE has become the benchmark automatic Bridge Cutter on the market.
This cutter is made up of a bridge whose Y axis moves through guides located on two walls.
The variability of disc size and the rotation of the table allow flexibility in carrying out the work, as well as the possibility of making miter cuts at 45º, both manually and automatically (optional).
The rotating and folding table can be fixed in any position thanks to its hydraulic brake. It also has a wedge brake in established positions every 45º of rotation, which ensures a total fixation of the desired position and the stability of the table during the cut.
An advanced user-friendly program and an intuitive 10” touch screen allow easy handling of the VICTORY NICE Bridge Disc.

Characteristic Specs
NO MAXIMUM OF THREADS 60-62
MAXIMUM MACHINE HEIGHT 7.65 meters
MACHINE LENGTH 11.40 meters
MAXIMUM BLOCK LENGTH 3500mm
MAXIMUM BLOCK HEIGHT 2200mm
THREAD LENGTH 23.50m
MACHINE VERTICAL TRAVEL 2400mm
FLYWHEEL DIAMETER 1800mm
WIDTH OF CUT 1600mm
MINIMUM CUTTING THICKNESS 21mm
DIAMOND WIRE SPEED 0-40m/sec
DIAMOND WIRE DIAMETER 6.3-5.3mm
MAIN MOTOR POWER 355kw

The HD-2 type cutting machine with one pass allows the longitudinal cutting of strips and tiles, to make baseboards, mosaics and all kinds of stone bases. By having two axes it allows cutting high thicknesses.

Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.

The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.

The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.

One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .

By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.

The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.

VICTORY Bridge Cutter with Rotating Head equipped with an automatic head rotation system of 0° and 90°. The head movements in 3 axes plus the inclination of the head for miter cutting, allow high-speed cutting of boards and increase productivity by more than 30% compared to conventional bridge discs.
With the automatic head tilt, the 45° miter cut can be done very quickly and simply.
Automatic work programs for complete exploded views of boards thanks to rotation and the new software.
Automatic adjustment of the tool rotation speed depending on the type of material to regulate tool wear and energy consumption.
All this makes the VICTORY Bridge Cutter with Rotary Head V2 a practical solution that offers high productivity and space savings.

Parallel cutting multiheads HLS
Ref. 8601
HLS multi-head parallel machine has high precision and waste reduction.
Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing.
The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.

Parallel cutting with independent heads HR4
Ref. 8602
The Parallel cutting machine type HR4 is designed for the longitudinal cutting of a single pass of strips and tiles, this machine regulates the distance between the discs guaranteeing maximum flexibility in the change of measures.

Our cutting line N.2990/2200-6+9C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the
horizontal stacker and positioned waiting to enter the production line in such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 6 heads on mobile bridge N.8000-L-6C and the transversal cutter with 9 heads N.8000-T-9C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with
precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception Suction Cup, of particular design, is made up of a rectangular plate, capable of supporting
horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-6+9C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Longitudinal cutter with 6 Ø600 heads and mobile bridge, model N.8000-L-6C.
– 1 Transversal cutter with 9 Ø600 heads and mobile bridge, model N.8000-T-9C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS BRIDGE CUTTER N.8000-L-600-6C

Characteristic Specification
Machine width 4220mm
Raceway length 6000mm
Max separation between discs 1-6 2200mm (interior)
min separation between discs 1-2-3-4-5-6 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (6)
Total installed power 100 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS BRIDGE CUTTER N.8000-T-600-9C

Characteristic Specification
Machine width 5370mm
Raceway length 5500mm
Max separation between discs 1-9 3500mm (indoors)
min separation between discs 1-2-3-4-5-6-7-8-9 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (8)
Total installed power 150 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS OF CUTTING TABLES WITH BELT N.2304/2200

Characteristic Specification
table width 2960mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 11.5m/min
Drive motor power 3 hp
CHARACTERISTICS OF ROLLER TABLE WITH SELECTION STOPS N.2590/2200

Characteristic Specification
table width 2930mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2930mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 5m/min
Motor power after cross 2.5 hp
CHARACTERISTICS OF MOTORIZED BELT TABLES N.2426/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 2 hp
CHARACTERISTICS LOADING TROLLEY N.1289-V

Characteristic Specification
table dimensions 1880×3200mm
Frame dimensions 2560×1140mm
vacuum center 30 m3/h / 1.35 hp
Hydraulic power plant 4 hp
Carriage advance motor power 0.75 hp
Table motor power 0.50CV
speed scrolling cart 5m/min
speed displacement pins 7.5m/min
width max. worked 2200mm
CHARACTERISTICS ROBOT-MANIPULATOR N-3530

Characteristic Specification
Max load capacity 120 kg.
min format of work 300x300mm
vacuum center 100m3/h
Installed potency. 25 hp
cycle time min. 10” sec

Brushing finishing machine for granite and Stone HSN-1000
Ref.8510
The brushing and aging line is characterized by its versatility to achieve special finishes and finishes in marble, natural stone and compact surfaces. Achieving these finishes on the entire surface of the pieces, without breaking them or with a minimum of breaks is the purpose of this line. We can quickly transform materials according to the finish that is needed, raw materials, brushed, honed or aged. The planer has a system of planetary satellite dishes by means of a spindle, it synchronizes the translation movement of the bridge and the advance of the piece by the belt that allows to obtain the correct finish on the entire surface of the piece.

The dry marble extraction cabinets (without water curtain) are a great advance in the capture and elimination of dust in dry manufacturing processes.
It is a more comfortable alternative to maintain in front of the traditional water curtains. The water cabins need more maintenance and the periodic change of the filters, which ends up not being done after a period of time. This causes the filter to clog and not work properly. On the other hand, the water tank can cause problems for not cleaning them properly, such as legionella, etc.
Dry marble vacuuming has greater suction power, significantly reduces maintenance problems for water curtains, and does not have the problems derived from poorly recycled water or unchanged filters.
The dust is sucked in through the front holes of the booth by means of a powerful suction system. The dust is captured in the inner textile sleeves.
A programmable self-cleaning system causes a short reverse cycle to be generated and these textile sleeves vibrate and the dust falls by gravity to the lower drawers. These drawers are easily emptied when full.
They are manufactured in any size, depending on the number of operators who will work within them. For example, those of 2 and 3m would be for one person, 4m for two people, 6m for three people.

– Automatic loading car with suction cups for feeding granite slabs in a production line.
– Movable frame, composed of a motorized carriage and a tilting table with a motorized roller frame and a set of vacuum equipment to activate the suction cups for receiving material, to collect the boards stacked in a semi-vertical position and deposit them on the rollers from the feeding table to the production unit. For feeding the boards stacked in a vertical position, it also has joints in the suction cups, activated by hydraulic cylinders to approach the boards in a vertical position and fold them down to deposit them on the roller table in the
loading position.
– Movable trolley on rolling tracks anchored to the ground to approach the material stowage units, with wheels driven by an electric gear motor.
– The programming and the sequence of work is done by selecting from the control panel. Smooth and precise movements thanks to the installation of frequency converters in the translation movement.

GANTRY-SWIVEL CRANES
Articulated arm swivel crane: speeds up operations in hard-to-reach places with narrow corners, pillars, etc.
It allows the movement of the material both indoors and outdoors.
The smartest solution to optimize workshop spaces and jobs.

Sludge bagging machines Hersen Eco-10
The sludge filtering equipment serves to filter and reduce the concentration of sludge in the basins that receive and store the water that the machines need to work.
The equipment carries the electrical panel to carry out the stops and starts based on the levels detected by the sensors that are installed in the basin and in the upper part of the equipment. In this way the pump starts or stops automatically, without the need to control the levels.
The suction pump is installed in the basin that receives the flow from the machines. From this position, the dirty water is pumped to the equipment which, by gravity, falls into the bags and a large part of the mud is retained. The cleanest water falls to the lower tray of the equipment and passes to the next basin destined to collect and store the clean water.
Built in stainless steel with independent stopcocks for each bag and self-suction pump in cast iron casing.

The COMBO equipment from Grani Roc is especially designed to dress the blocks before they go for slabbing in a multiwire saw machine. It is composed of an stationary wire saw, a mobile wire saw and a mobile trolley, allowing to perform two cuts simultaneously.
·The structures and pillars of the machines are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process.
· All the steel elements of the structure are subjected to a surface finishing consisting of a deep cleaning and degreasing treatment, a metallization treatment and corresponding protective layers and painting. These treatments enhance the durability of the machine against aggressive weather and working conditions.
· The main motors are controlled by electronic frequency variators –inverters-, that permit to apply progressive linear speed to the wire and its adjustment to optimize the behaviour and performance of the tool.
· The tensioning of the wire is made pneumatic with detection and indication of wire breakage or shortage and stop the machines in case of breakage of the wire.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water.
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel, situated in the lateral part of the machine, has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The machines have their own mobile compressor, required for the pneumatic system for tensioning the wire.
· The trolley is 2.300 x 2.300 mm and has a maximum capacity of 30 Ton. The rotation is manual 360º and can be blocked every 90º. The movement of the trolley is controlled by an independent keypad to provide an easy movement and positioning of the trolley in other parts of the factory

Blocks turner Model: VBH
Turner by a hydraulic system that is able to rotate easily stone blocks of large dimensions, to suit any position.

At HERSEN we are manufacturers of crane accessories such as this arm for loading and unloading cranes. It is a very useful and practical solution for the transport, loading and unloading of packaged board packages (or bundles) in closed containers since it allows large and heavy loads to be moved very easily.
In this model of loading arms for cranes, the bundle or package of boards is in the middle of the two arms as we can see in the image above.
HERSEN bundle loading and unloading arm types:
The arms for loading and unloading bundles or packages of boards in closed containers can be manufactured with different load capacities, the most used are 3.5 and 4tn. The loading arm has an empty weight (when it is not loaded) and once it is loaded the sum of both (empty weight + load) gives us a total weight. The crane where the loading arm is installed must have the capacity to lift this total load.
The 5tn crane is one of the most widely used in marble workshops. When this is the case, to lift a 3.5 ton bundle requires that the loading arm weigh less than 1.5 ton to be able to be used in this type of 5 ton cranes. For this reason, two types of construction are made: standard (model A) and light (model L). One of the two main differences between one model and another is the following:
Curb Weight: Standard construction weighs more than light curb. In this way, with the L model, a 3.5tn bundle can be loaded / unloaded with a 5tn crane.
They can be manufactured in different sizes for the HERSEN model A and model L, although the most used and demanded are two models:
Arm for loading and unloading Model A
Load capacity: 3.5 Tn
Total length *: 7.5 m
Empty weight: 3.4Tn
Ref. 50181
Arm for loading and unloading Model L
Load capacity: 3.5Tn
Total length *: 9.6 m
Empty weight: 1.5Tn
Ref. 50182
(*) The total length refers to the upper part. As for the lower length, that is, the part that goes into the container, it is the same in both models.
(*) In the following video you can see: A 7.5m A type loading arm with a 3.5 tn bundle and the loading is carried out in a 13.5m wide warehouse with a 20ft container.
The entire manufacturing process of the arms for loading and unloading cranes, from their design to their final installation, is carried out by HERSEN.
If you want more information or an explanation of the differences between the models of loading arms A and B, you can take a look at the attached drawings in pdf or contact us directly through the form.

Ref. 50161 Manual telescopic crane arm, extendable in length from 2.2 meters to 3.2 meters. Load capacity 500 Kg

Jib arm for loading and unloading bundles for forklift
Ref. 50184 technical characteristics

MEASURING SYSTEM
MILLENNIUM LASER 3D
New 3D measurement system: Greater measurement precision through a fine adjustment system for the most precise orientation. In conjunction with your professional tripod, it becomes a perfect high-precision measurement solution.
With 3D measurement, this system allows you to take measurements of flat and vertical surfaces generating three-dimensional measurements (eg kitchen countertop + front).
With this system you will make complete measurements of countertops, facades, templates, stairs, offsets, curves, swimming pools... in a few minutes.
The ideal complement for the cutters of the MILLENNIUM CNC 5 and IMAGE CNC ranges to optimize work operations. Defines a final file that can be executed directly by the machine, without the need for intermediate processes, which reduces measurement times, drawings, hole embedding, etc...

Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.

The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c

Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c

Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200

Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp

Our cutting line N.2995-4C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this cutting line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The motorized roller loading table constitutes the feeding point to the cutting unit. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The cutter with 4 heads on mobile bridge N.8500, is a machine equipped with the latest technological advances in terms of its mechanical and electronic design. Above all, the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table stand out, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on which it moves, to carry out the work. cutting.
The movable disc-holder heads supported on linear guides on the bridge, with recirculating linear ball slides, also carry out the vertical movement guided on recirculating ball slides and driven by a spindle.
laminated with ball recirculation nut, to be able to position with great speed and precision, leaving the whole assembly perfectly protected by PVC bellows.
Headstock equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The whole machine and the heads are equipped with an implantation system with centralized greasing for easy maintenance.
Automatic rotary cutting table, it is built on a steel structure with a rectified upper plane, on which the conveyor belt rests with the outer surface covered with rubber to prevent the sheets from slipping during the cutting phase.
The unloading table with band has a frame built based on steel profiles with a transport band for unloading the cutting table simultaneously, while the cutting unit already receives the next board and is ready to cut.
In the electrical and control installation section, it is worth highlighting the installation of state-of-the-art automatons with programs custom designed by our technicians, so that the programming of the machine is as simple as possible, thus avoiding losses of unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on an operator terminal with a screen, where all the parameters of the cutting cycle are displayed.
The cutting line N.2995-4C/2200-G basically consists of:
– 1 Motorized plastic roller table N.2274
– 1 Cutter with 4 Ø600 heads and mobile bridge, model N.8500-800/4C
– 1 Rotating and motorized band table, model N.2304-G
– 1 Motorized band table for material outlet, N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS ROTATING TABLE WITH BELT N.2304/2200

Characteristic Specification
table width 2957mm
length max. of the table 4044mm
width max. worked 2200mm
Belt displacement speed 11.5m/min
Drive motor power 4 hp
CHARACTERISTICS OF MOTORIZED BELT TABLE N.2426/2200

Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 3 hp

Hersen Industrial Trailer
The HERSEN Industrial Trailer is a breakthrough in the logistics and transportation of heavy cargo in reduced spaces. These heavy cargo trolleys, made entirely by HERSEN, can support loads of up to 72 tons. They are certified and have passed all relevant tests in technological institutions.
The model shown in the photos (Ref 50458) shows an example capable of transporting cargo of up to 14 tonnes in very reduced spaces. The measurements of this particular unit are 3m x 2.6m. However, at HERSEN we design and custom-manufacture any request of this type to meet the client’s requirements.
Our range of industrial trailers comes equipped with double wheels to distribute the weight and increase safety. Additionally, the rubber surfaces on each wheel are designed to adapt to uneven floors, thus minimising vibrations on the load. The rotation system means that each of the wheels adapts to the radius required to manoevre the curve and stabilise the cargo. The steering has an advanced control system to maintain wheel alignment and thus avoid wear and tear.
The rotating system of industrial trailers can be:
Jumbo System: All the wheels can rotate conforming to the rotation of the pulling rudder to manoevre the curve. This facilitates manoeuvrability and reduces the space necessary to complete the turn. It is especially useful in premises where there is very limited space to manoeuvre.

Trolley with hydraulic arm for handling installation and for slabs of porcelaine, glass, marble and granit
Ref .: 880-300 Technical characteristics:
Robot Setter for the manipulation, setting up and installation of porcelain, marble, granite and glass slabs
The movement of the robot is done manually
Maximum capacity 300 Kg
(See table of load capacities based on arm length)
Powered by replaceable batteries
It consists of a battery with its charger
Hydraulic boom lift
Manual or hydraulic telescopic arm
Pneumatic rubber wheels
360º swivel attachment at the end of the arm to rotate the suction cup
Lateral and frontal translation of the head
Robot Weight: 250kg
Total weight of the 12 counterweights of the Robot: 250kg
Robot weight + the 12 counterweights: 500kg
Maximum height from the ground to the center of the 4 suction cups with the table vertically: 2.43m
Maximum height from floor to table horizontally: 2.83m
As an option, it can be supplied with an independent 4-plate suction cup with battery and quick coupling to separate the suction cup from the robot. The suction cup, by remote control, can be operated to open and close and can be raised independently.

Two-base Industrial Suction Pads
Equipment with two-base industrial suction pads on a chassis or metal structure with loading capacities from 250 kg to 800 kg, suitable for longer pieces in order to prevent the product from bending and cracking.
Its great advantage is that it facilitates handling, loading and unloading long pieces such as kitchen worktops.
The two suction pads move independently of each other. Thus, the suction pads can be fixed onto the section of the piece you want, thus avoiding the parts where they cannot be attached, such as holes, gaps, recesses, etc.
Also, the chassis is made with a swing angle, with the aim of enabling you secure the suction pad on counter tops with “L” shaped parts, so that the suction pad fits the shape of these pieces and lifting the marble is made more secure and balanced.
The movement of counter tops from a horizontal to a vertical position is made easy, manually or with a valve.
The two-base suction pads improve the ergonomics of the marble worker, reducing muscle fatigue and strain from the effort involved in handling marble.
They can be installed on bridge-cranes, jib cranes, crane trucks and forklifts.
The two-base suction pads can be operated using compressed air (venturi) or vacuum pump.
Maximum loading capacity: 500kg.
Ref.50702

– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Trestle with double stowage for boards or slabs, which allows the automatic feeding or stowage of the same from the production lines from one side of the stowage and the manual loading or removal by the operators simultaneously from the other side of the stowage. With this application, machine downtime is reduced, achieving a higher degree of operability and therefore of production of the work lines.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to support loads of 20+20 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.

– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Motorized trolley support rails welded to the structure.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to withstand loads of 35 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.

Industrial vacuum load handlers allow lifting, turning and turning loads as diverse as bags, boxes, containers, drums, pallets, toilets, marble, porcelain and solid surfaces up to 265Kgs. Operation is intuitive, smooth and fast performing all the functions of grabbing the load, raising it, lowering and releasing the load from a single control, the manipulator handle.
Lifting is simple and safe, both for people and for the product. They can be installed to optimize any manufacturing and handling process, in logistics warehouses, for picking and order preparation. Its ergonomics, functionality and safety reduce effort and optimize productivity, reducing user fatigue and injuries.
How does the vacuum manipulator work?
The manipulator uses vacuum to hold and lift the load. The air is guided through a filter and an air pipe, to raise the lifting tube with which the manipulator is equipped. The vacuum within the lift tube is regulated from the manipulator’s control handle. This manipulator is where the suction unit is attached, which is the one that will be in contact with the material to be handled.
When the partial vacuum increases, the lift tube shrinks and lifts the load. When the partial vacuum is reduced, the lift tube is stretched, lowering the load. The sniffer keeps the load safely gripped until it reaches the ground. In the event of power loss or a power outage, a safety valve acts in such a way that the load descends in a smooth and controlled way to the ground.
We have stainless steel handling equipment for the food, pharmaceutical, cosmetic, chemical, and logistics industries. We also carry out special applications for clean areas, corrosive environments and ATEX areas.
What sipper to use?
We develop standard and special suction pumps on request, made to measure according to the type of load, weight, suction surface and the type of handling required for each product and application.
We can handle boxes with the product inside, both open and closed, with seal or staples.
Irregular boxes with fragile products inside the boxes can also be handled and lifted and stacked.
We develop standard and special suction pumps on request, made to measure according to the type of load, weight, suction surface and the type of handling required for each product and application.
We can handle boxes with the product inside, both open and closed, with seal or staples.
How is the vacuum generated?
The vacuum pump is what runs the entire system. The vacuum is generated by means of a high-performance, low-consumption vacuum motor-pump. This motor pump can be installed up to 30m away from the lifting point. A remote control can be installed to operate the pump without leaving the duty point.
Where to install the load handler?
They can be installed on our light profile jib cranes and overhead cranes. The overhead crane or jib crane supports the lifting equipment. We offer a wide range of lifting systems such as column cranes, jib cranes, light overhead cranes, suspension cranes, mono-rail cranes, low height cranes, Bridge cranes with frame structure. We provide from the design to the execution of the “turnkey” tailor-made project for the handling of almost any type of material.

– Motorized block holder carriage for Multiwire Cutter.
– Maximum load: 35 tons.

The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine has the classic setup of static structure with moving trolley and has an automatic system for changing the thickness between wires. This system makes the machine being very versatile and time saving in changing the thickness of each cut.
·The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process.
· All the steel elements of the structure are subjected to a surface finishing consisting of a deep cleaning and degreasing treatment, a metallization treatment and corresponding protective layers and painting. These treatments enhance the durability of the machine against aggressive weather and working conditions.
· The main motor is direct in the main pulley, and it is controlled by an electronic frequency variator –inverter-, that permits to apply progressive linear speed to the wire and its adjustment to optimize the behaviour and performance of the tool.
· The tensioning of the wire is made pneumatic and automatically and independent for each wire, with indication of wire breakage or shortage.
· The machine has an automatic system for adjusting the distance between wires, instead of having manual devices or having to remove all the wheels manually for changing the thickness of the slabs to be cut.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water.
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The machine has its own mobile compressor, necessary for the pneumatic system for tensioning the wire.
· The trolley is 2.300 x 2.300 mm and has a maximum capacity of 30 Ton. The rotation is manual 360º and can be blocked every 90º.

Large size block cutter which works with one or more vertical disks and a horizontal disk. Its structure sits on four pillars in order to grant the stability and strenght needed to guarantee an accurate cut.
It is recommended to complete the block cutter with the automatic discharger in order to make the already cut pieces unloading easier.
Different models depending on the amount and the diameter of the vertical disks to be used.

MEASURING SYSTEM
MILLENNIUM LASER 3D
New 3D measurement system: Greater measurement precision through a fine adjustment system for the most precise orientation. In conjunction with your professional tripod, it becomes a perfect high-precision measurement solution.
With 3D measurement, this system allows you to take measurements of flat and vertical surfaces generating three-dimensional measurements (eg kitchen countertop + front).
With this system you will make complete measurements of countertops, facades, templates, stairs, offsets, curves, swimming pools... in a few minutes.
The ideal complement for the cutters of the MILLENNIUM CNC 5 and IMAGE CNC ranges to optimize work operations. Defines a final file that can be executed directly by the machine, without the need for intermediate processes, which reduces measurement times, drawings, hole embedding, etc...

Sludge bagging machines Hersen Eco-10
The sludge filtering equipment serves to filter and reduce the concentration of sludge in the basins that receive and store the water that the machines need to work.
The equipment carries the electrical panel to carry out the stops and starts based on the levels detected by the sensors that are installed in the basin and in the upper part of the equipment. In this way the pump starts or stops automatically, without the need to control the levels.
The suction pump is installed in the basin that receives the flow from the machines. From this position, the dirty water is pumped to the equipment which, by gravity, falls into the bags and a large part of the mud is retained. The cleanest water falls to the lower tray of the equipment and passes to the next basin destined to collect and store the clean water.
Built in stainless steel with independent stopcocks for each bag and self-suction pump in cast iron casing.

Kronos is the Xilex machine that allows total control of the filtering and adhesión process to obtain top quality finishes. It is an oven for epoxy, polyester and polyurethane (PUR) resin curing that accelerates the activation and consolidation of chemical properties in marbles, granites and other more delicate types of natural stone such as onyx or alabaster.
Kronos oven differs from conventional machines in that it performs greater filtration and adhesion of resins, and it allows to produce controlled effects on the surface finish (brightness, light and dark tones, etc.) with a production of up to 30 tables at hour.
Also, Kronos by Xilex eliminates waiting times of 24h-48h-72h since natural stone can be polished directly after only 45 minutes. In this way, production lines can perform reinforcement, finishing and continuous polishing, which translates into a 30% increase in productivity and a significant reduction in delivery times of the final product.
Maximum quality and control of the marble and granite finish
Kronos allows filtering control and perfect adhesion to achieve the best slabs quality and avoid breakage in the final material. Also, the good filtering of Kronos in its uniform process improves the performance of the resins and allows to obtain the desired surface effects on the product.
The resin hardening machine, Kronos, can easily adapt to conventional production lines as it fits to the standard size of the transport tables. In this way, companies in the marble, granite and natural stone sector that want to improve the finish of their materials and optimize processes just have to make a simple adaptation of their production lines.
Productivity increase and cost savings with Kronos
Processing with Kronos oven by Xilex allows a fast activation of catalysis of resins, achieving significant savings and a 30% increase in productivity:
Eliminates waiting time of 24-48-72h: after hardening, in 45 minutes, polishing can be performed.
Increase of production in the number of resin slabs.
Reduction of resin consumption up to 20%.
Energy savings of up to 40%.
Space optimization: reduction of the trays necessary for material processing and elimination of intermediate warehouses before polishing.

The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
·The movements of the machine are controlled by a 6 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the roduction of complex shapes as balls, screws, etc.