If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Categories:
Stone Block Cutting Machines (1)
Stone Slab Cutting Machines (18)
Stone Tile Cutting Machines (33)
Stone Surface Processing Machines (5)
Stone Finishing, Profiling Machines (24)
Stone Handling, Loading Machines (4)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesHydraulic Stone Splitting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EM03 - Mini Hydraulic Stone Crushing Machine
• Working Height Range: 10 – 150 mm
• Working Width Range: 10 – 300 mm
• Working Length: Free Length
• Roller Conveyor Motor Power: 0,55 kW
• Hydraulic Tank Capacity: 90 lt
• Hydraulic Motor Power: 5,5 kW
• Max. Working Pressure: 180 bar
• Machine Dimensions ( W / L / H ): 970 / 660 / 2000 mm
• Automatic Sensor - Manual Pedal Crushing Control
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EM25-1 Stone Veneering Machine
• Belt Width: 200 mm
• Working Width: 250 mm
• Working Height: 300 mm
• Double 45 Degree Conveyor Belts
• Number Of Head: 1
• Disc Diameter: 900 mm
• Cutting Unit Motor Power: 22 kW
• Belt Motor Power: 2x 0,55 kW
• Belt Speed : 3 mt / min
• Machine Dimensions ( W / L / H ) : 2200 / 3200 / 1750 mm
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EM09 - Multi-Disc Cross-Cutting Machine
• Number Of Cutting Discs: 5
• Diameter of Disc: 350 – 400 mm
• Working Thickness: 10 – 80 mm
• Working Width Min. / Max. : 250 – 3000 mm
• Cutting Disc Motor Power: 5 x 7,5 x 11 kW
• Cutting Disc Distance Setting Motor Power: 4 x 0,55 kW
• Bridge Movement Motor Power: 2,2 kW
• Belt Motor Power: 0,75 kW
• Total Electrical Power: 43 x 61 kW
• Machine Dimensions ( W / L / H ): 2300 / 6000 / 2500 mm
• Linear Guide Bridge Movement
• Pneumatic Piston Pusher
• Automatic Cutting Dimensions Control
https://ekizoglumakina.com/en/product/multi-disc-cross-cutting-machine
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Surface Processing Machines Bush Hammering Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EM17 - 2+4 Calibrating and Bush-Hammered Machine
• Belt Width: 700 mm
• Number Of Calibrating Heads: 2
• Calibrating Motor Power: 22 kW
• Calibrating Up–Down Motor Power: 0,55 kW
• Diameter of Calibrating Disc Tray: 650 mm
• Working Thickness: 10 – 80 mm
• Diameter Of Bush Hammering Tray: 650 mm
• Number Of Bush Hammering Heads: 4
• Bush Hammering Motor Power: 1,1 kW (126 Rpm)
• Minimum Working Width: 300 mm
• Maximum Working Width: 610 mm
• Belt Motor Power: 0,75 kW
• Belt Speed: 0 – 400 mm / min
• Total Electric Power: 51 kW
• Machine Dimensions ( W / L / H ): 1400 / 6000 / 2200 mm
https://ekizoglumakina.com/en/product/calibrating-hammered-machine-em17
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC Bridge Cutting Machine 6 Axis
Tuto Mermer
Tuto Mermer Dis Tic Ltd Sti.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SCHIND CC01 Marble and Granite Cross Cutting Machine
Only the transverse cutting machine cuts jagged edges without any difficulty with its powerful motor.
It cuts straight on Y axis… No 45 ° cutting, No head rotation to another directions,
Cutting ability is net 800 mm on Y axis,
Cutting head group moves on the linear slides by button / joystick. Saw Forward – Saw Backward,
Marble slabs can be easily load on the plastic rolls for squaring,
Cutting speed is adjustable
Option: assembling bellows to cover upper body moving linear with additional cost
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 680 mm
Çalışma Kalınlığı / Working Thickness 75 mm
Bant Motor Gücü / Band Engine Power 2 hp
Testere Motoru / Saw Engine 15 kw 3000 dev/dak (Rpm)
Testere Çapı / Saw Diameter 450 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 2 hp
Toplam Güç Tüketimi / Total Electricity Consumption 6,25 kw
Ebatlar / Dimensions 190 x 190 x 480 cm
Ağırlık / Weight 1500 kg
Kontrol Paneli / Control Panel PLC Otomasyon / Automation
GÖLER MAKİNA
Turkey
Goler Makine Rulman San Tic. Ltd. Sti.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
$37000-37500
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Anchor system, hook channel and hole is the machine.
Makes 4 holes and 4 grooves in one operation.
It provides you maximum speed with conveyor system and PLC control.
The machine for those who race against time
It opens 4 holes and 4 chamfer channel in a sing operation
Performance Durations-- Average time
Opening Holes --5 sec
Opening Channels --2 sec
Transition to Other Operation--4 sec
Total Operation Time-- 11 sec
SEN-MAK Koll.
Turkey
SEN-MAK Koll.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge Type 6 axis Waterjet Machine is manufactured as full integrated with dividing system 2.1 Nm servo motors
Servo motor, linear sledge and vehicles, helical rack and pinions is used for providing a rapid and smooth axial movement. The linear slides and rails, helical rack and pinions in all systems are protected with automatic greasing pump in order to prevent rust and to continue sensibility. -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 680 mm
Çalışma Kalınlığı / Working Thickness 75 mm
Bant Motor Gücü / Band Engine Power 2 hp
Testere Motoru / Saw Engine 15 kw 3000 dev/dak (Rpm)
Testere Çapı / Saw Diameter 450 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 2 hp
Toplam Güç Tüketimi / Total Electricity Consumption 6,25 kw
Ebatlar / Dimensions 190 x 190 x 480 cm
Ağırlık / Weight 1500 kg
Kontrol Paneli / Control Panel PLC Otomasyon / Automation
GÖLER MAKİNA
Turkey
Goler Makine Rulman San Tic. Ltd. Sti.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
3 Axis CNC Waterjet can cut all kinds of materials existing in the nature up to 200 mm thickness with power generated by mixing pressurized water and abrasive sand. All materials cutting can be made with the same nozzle. Not only for thick but also for thin materials, it can realize 90 degrees corner, narrow angular and small radius precise cuttings. -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Artificial Stone
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Saw Motor Power: 20 kW
Max Saw Diameter: 700 mm
Maximum Working Length: 3500 mm
Maximum Working Width: 2100 mm
Maximum Working Thickness: 240 mm
Water Consumption: 50 lt/dk
Machine Length: 5500 mm
Machine Width: 3200 mm
Machine Height: 4000 mm
OZKKM 700/500 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 700/500 is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being done.
OZKKM 700/500 AQUILA is the result of the most advanced designing on computer and the massive use of FEM”* analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machines, both have technical solutions similar to the ones of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start)
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 700 mm for the AQUILA 700, diameter of 500 mm for the AQUILA 500. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (option) to facilitate the loading and unloading of the processed pieces
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesMosaic Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
the thrilling mosaic cutting machine of the age hard to find even on the second hand market
order now start counting your golden münze
precise cutting
1x1 cm 1,5x1,5 cm 2x2cm 2,3x2,3cm all american sizes available
custom design assebly molds
cutting molds with availibity of cutting triangle ; octagon and many other custom shapes
Kimmco
Turkey
Kimmco Koray International Marble & Machinery Co.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC system, Hydraulic Power Unit and Steel body with ideal features, durable, long-lasting machine. This machine which can cut at 45, 0, 360 degree angle will make your job easier in cutting marble, natural stone and granite plates.
Schind 16651 bridge type cnc 4 axis marble cutting machine have most efficient and useable design. Schind 16651 CNC marble cutting machine have hydraulic damper table. Hydraulic table can moving 80 degree and slabs can be loading easily on the machine. Marble, granite, stone, onyx, travertine and other stones can be cutting with this machine and circular cut possible.
Machine linearity is important for marble, granite cutting process. Schind 16651 bridge type cnc marble granite cutting machine have linear rail on body movement and full automatic all movement. While you are cutting your marble or granite you notice that efficient cutting ability.
Wooden table and bellows are used in Schind 16651 CNC marble granite cutting machine.
Also 5 axis is option in this machine.
Longitudinal, transverse and 45 ° cutting machine,
Cuts on X and Y axis,
The bridge and its table work fully automatic,
There are both manual and automatic double page digital touchscreen management panel,
It can make automatic dimensioning in 10 different sizes,
Upper body movements are working with linear slides system, servo motors and gearbox,
There is a fully automated CNC control panel,
Marble plates can be easily put on the cutting table by the dumper hydraulic system,
Technical support is possible to the machine brain with internet connection,
Wooden table and bellows are used
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Cutting stroke of the blade 3600 mm
Maximum vertical travel of the blade 400 mm
Maximum bridge movement on y axis 4300 mm
Maximum blade diameter 800 mm
Blade hole diameter 60 mm
Table dimensions 1720 x 3500 mm
Power of the blade motor 22 kW
Maximum cutting thickness 250 mm
Total installed power 29 kW
Adjustable blade speed of travel 0-24 m/min
Weight 4500 kg -
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM 750/650 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 750/650 is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being done.
OZKKM 750/650 AQUILA is the result of the most advanced designing on computer and the massive use of FEM”* analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machines, both have technical solutions similar to the ones of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start)
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 750 mm for the AQUILA 750, diameter of 650 mm for the AQUILA 650. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (option) to facilitate the loading and unloading of the processed pieces
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone
Merkon Machine
Turkey
Merkon Machine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
3D 5 Axis CNC Waterjet is designed by our engineers to make highly precise 0-120 degrees angular cuttings.Thanks to rigid structure, not being affected by deflector force of high pressure coil, can realize 3D cuttings in 0.02 mm accuracy.5 axis head can rotate +/- 360 degrees. -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Sandstone, Travertine
Machinery Function Features:
Excalibur ® Lenght Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm., 2100 mm is current width of raw material, its physical structure is standardized in respect to these measurements.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge Movement, PLC control, 4 axis movement and steel body with ideal features, durable, long-lasting machine. This machine which can cut at 0, 90, 45 degree angle will make your job easier in cutting marble, natural stone and granite plates.
Longitudinal, transverse and 45 ° cutting machine,
Cuts on X and Y axis,
The bridge and its table work fully automatic,
There are both manual and automatic double page digital touchscreen management panel,
It can make automatic dimensioning in 10 different sizes,
Upper body movements are working with linear slides system,
In addition to the 16501, sides and cutting head are covered with metal sheets,
Due to the upper body moves more rapidly, brake motors are used,
Marble plates can be easily put on the cutting table by the dumper hydraulic system,
Technical support is possible to the machine brain with internet connection.
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite
Machinery Function Features:
Excalibur ® Width Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm.,1250 mm., 2100 mm is current width of raw material,its physical structure is standardized in respect to these measurements. For raw materials with marginal measurements, the solution is provided by special design chassis frames.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology.. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Bridge Movement, PLC control, 4 axis movement and steel body with ideal features, durable, long-lasting machine. This machine which can cut at 0, 90, 45 degree angle will make your job easier in cutting marble, natural stone and granite plates.
Longitudinal, transverse and 45 ° cutting machine,
Cuts on X and Y axis,
The bridge and its table work fully automatic,
There are both manual and automatic double page digital touchscreen management panel,
It can make automatic dimensioning in 10 different sizes,
Upper body movements are working with shaft system,
Marble plates can be easily put on the cutting table by the dumper hydraulic system,
Technical support is possible to the machine brain with internet connection.
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
You can cut marble slabs at 90° and 45° in X and Y directions with PLC controlled 3-axis movement capability. With the strong chassis structure due to NPU steel, you can obtain a smooth surface in cutting your granite slabs. Natural stone processing...
Longitudinal, transverse and 45 ° cutting machine,
X and Y axis cuts,
Cutting head and its table works fully automatic,
It has both manual and automatic double-page digital touchscreen management panel,
It can make automatic sizing in 10 different sizes,
Linear slide system is used for upper body movements,
Technical support is possible to the machine brain with internet connection,
Made of NPU 260 chassis.
Table height from floor: 90cm
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Handling, Loading MachinesConnecting Roller Conveyors
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Slab Transfer Conveyor Cnv 2000 - Connecting Roller Conveyors -
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Alligator® provides unique production experience to its customers in sizing natural and artificial products such as ceramic, glass, composite material, marble, travertine and granite.
Its first quality certified steel manufactured body is equipped with top-end quality machine elements and apparatus.
Alligator which also called crocodile, multi disc cutting machine, mosaic cutting machine, multi-cutting machine
has single and multiple heads versions and each heads can have several blades. Alligator does the process of cutting
Stones, marbles, ceramic, brick and granite. With it’s 500, 700, 900 and 1250 mm. Cutting width versions,
Alligator® can produce thousands of product in different dimensions.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM 725/625 AQUILA is a monobloc bridge sawing machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up on quality. The standard versions of AQUILA 725/625 is monobloc, i.e. mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed from time to time near the factory where the coating, flooring, etc. are being performed.
OZKKM 725/625 AQUILA are the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though they are sawing machines, both have technical solutions similar to those of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 725 mm for the AQUILA 725, diameter of 625 mm for the AQUILA 625. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (optional) to facilitate the loading and unloading of the processed pieces.
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Alligator® in 2 headed, 3 headed, 4 headed mosaic sizing and cutting heads’ back and forth up and down fine movements in drawing operations are controlled from touch-operated operator panel. In precut cuttings the saw on the second head following previous drawing route may be exposed to various corrosions. Alligator ® provides an opportunity for the setting of precision of back and forth Alligator ® , despite the cutting problems that may arise from abrasion, it allows for forward-backward wear adjustment with a precision of 1/10 of a millimeter.
Alligator which also called crocodile, multi disc cutting machine, mosaic cutting machine, multi-cutting machine has single and multiple heads versions and each heads can have several blades. Alligator does the process of cutting Stones, marbles, ceramic, brick and granite. With it’s 500, 700, 900 and 1250 mm. Cutting width versions, Alligator® can produce thousands of product in different dimensions.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM 725/500 AQUILA is a monobloc bridge sawing machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up on quality. The standard versions of AQUILA 725/625 is monobloc, i.e. mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed from time to time near the factory where the coating, flooring, etc. are being performed.
OZKKM 725/625 AQUILA are the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though they are sawing machines, both have technical solutions similar to those of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 725 mm for the AQUILA 725, diameter of 625 mm for the AQUILA 625. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (optional) to facilitate the loading and unloading of the processed pieces.
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
High quality, durable and long life marble cutting machine will make your job easier by cutting marble, natural stone and granite platters with side cutting feature.
Our machines, which we produce with our experience in the marble and granite sector developed in Turkey, have effective and efficient designs. With the Schind 16400 marble, granite, stone cutting machine, you can speed up your production process thanks to this effective and efficient design. You save work and time with the possibility of longitudinal and 45° marble cutting.
The chassis of Schind 16400 marble, granite, stone cutting machine is produced with NPU 240 iron. Thus, you can obtain smooth parts without vibration during cutting.
You can shape your production as you want with two different sawing speed options.
Longitudinal cutting machine
45° cutting
It cuts only on X axis
Cutting head can't turn
It can be used manually
Made of NPU 240 chassis
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM CRUX is a 5-axis monoblock bridge saw machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of CRUX is monoblock, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monoblock configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being performed.
OZKKM CRUX is the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machine, both have technical solutions of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time forplacing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate disks up to a diameter of 625 mm and ½” gas thread tools. It also warrants the choice of placing the cutting disc in axis with the head rotation center to reduce the efforts on the axis to zero for an excellent cutting quality. The inclination of the disc can be arranged automatically from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be tilted up to 80 ° by a hydraulic piston to facilitate the loading and unloading of the processed pieces.
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
OZKKM 5 Axis / CRUX XL 625 CNC Bridge Saw Machine
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesMulti-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Alligator which also called crocodile, multi disc cutting machine, mosaic cutting machine, multi-cutting machine
has single and multiple heads versions and each heads can have several blades. Alligator does the process of cutting
Stones, marbles, ceramic, brick and granite. Up to 300 mm. Cutting width versions, Alligator® can produce
thousands of product in different dimensions.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC MACHINING CENTER
GENERAL DESCRIPTION:
NC4-320 4 axes is a multifunctional working centre to process marble, granite and compound stone designed also for complex processing in short time and high quality. NC4-320 has been specially designed to ensure higher production capacity as well as the largest flexibility thanks to the very high working and displacement speed and the wide gamut of possible geometries,which allow any kind of processing ( shaping, profiling, milling, chamfering, drilling...)on marble, granite and compound stone slabs without the intervention of the operator, following a pre-set program. The machine features a mobile bridge structure, engineered using the state-of-the-art techniques of computer-assisted design, which forms a sole assembly with the uprights fixed to the based onto which the pieceholding table is applied.
AXES MOVEMENT:
The axes move by re-circulating ball screw at 60 m/min with accelerations which permit to reach the maximum speed in very short time. An automatic device to lubricate the guides and the screws grants high reliability over the time of every moving part.
The rapid displacements of the bridge along the shoulders are performed at a speed of 40 meters per minute; this make it possible to have faster work cycles, as all idle times for non-operative movements are absolutely negligible.
THE SPINDLE UNIT:
The tempered and rectified steel guides for the displacement of the spindle holding saddle (x axis) are machined onto the normalized, electrowelded steel bridge, suitably dimensioned and ribbed. The whole sliding system is protected in order to avoid any possible contamination between the processing water and lubricating oil. The spindle holding saddle moving on recirculating roller slides.
In order to obtain rapid displacement up to 40 meters per minute, which accelerates the work cycles, the movement of the spindle-holding saddle is provided by a fixed high precision rectified screw and a mobile ball bearing preharced lead nut linked directly to a digital SIMENS servo motor.
The electro-spindle adopted for this work centre is manufactured by the most important european producer of these components; it is a powerfull unit (12kw) and can attain very high rotationspeed (max 11.000 rpm) in order to use milling tools with reduced diameters and therefore, providing extremely pricise processing. The stator and the rotor are housed within the casing; the whole assembly is cooled and stabilized by means of a thermal sensor to increase its reliability. The tool cooling water and the cone cleaning air pass through the spindle at a flow rate of 60lt/min. Spindle vertical travel of same 400 mm which allows to also rough-sahpe tick billets.
CONTROL UNIT:
The NC4-320 is equipped with a latest technology continuous numerical control unit (CNC) SIMENS sinumeric of the latest generation, with digital control on PC architecture.
STRUCTURE:
The support structure of the NC4-320 is composed of a rugged closed-type structure fabricated from a single pieces of normalized welded steel, so as to quaranty the maximum rigidity, thereby providing extremely pricise processing
The bridge moves along the shoulders of the main structure, onto which the tempered and rectified steel guides are machined.
The bridge movement along the shoulders is by a system of two recirculating ball-bearing screws with precharged lead nuts, each one acting on one side of the bridge.
This solution allows to have perfect control and absolute precision oof movement and positioning. Traction is garantied by two digital servo motors, each one acting on one screw; the perfect synchronism of the two screw is constantly driven by SIMENS numerical control installed on the machine.( Gantry drive system )
The NC4-320 numerical work centre has a mobile bridge along the Y axes; this solution makes the work area completely open and accessible, which facilitates loading and unloading of work-pieces even when lifting equipment is required.
Vacuum circuit with frontal control, easily accessible to the operator.
THE WORK TABLE
The machine’s base is made up of an extremely rigid structure upon which is placed an aluminium worktable rectified to grand maximum flatness of the work area. Aluminium work table provided with grooves for mechanical fastening of vacuum pads, to ensure that, the work pieces are tightly locked in place even during heavy grinding operations 22 position line tool store positioned on the two internal sides of the machine.
THE FOURTH “C” AXES:
Among the range of accessories, it is also available a unit that allows to use tools with horizontal axes.
This unit is fixed to the spindle by means of ISO 40 coupling,as any other tool; it can continuously rotate 360 around the , “C” vertical axes, which is numerically controlled and can be locked in any position to perform retilinear cuts in all directions.
It is a continuous rotating fourth axes “C” which makes it possible to use cutting units with vertical disc to perform rectilinear cuts, or convex disc for corvilinear cuts, or 45 adjustable disc to perform inclined cut
STANDARD SUPPLY
Manuel for use and maintanance.
20 pcs. BT 40 tool stainless steel holder cones ( ½ gas )
20 pcs. Adapter for wheel cutters
20 pcs. Pullstad bolds.
4 pcs. Ø160 mm suction cups.
4 pcs. Ø 100 mm suction cups.
4 pcs. Ø 80 mm suction cups.
6 pcs. Retractable positioning reference supports.
2 pcs. Pneumatic vice.
2 pcs. Retractable suction cups Ø 100 mm.
Tool box.
Spindle motor chiller
Vacuum pump
Water filtration device.
Air filtration devices for 5 microns
Electric box air-conditioning.
Electronic Siemens handwheel.
2 pcs. Water pumps. -
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM CRUX is a 5-axis monoblock bridge saw machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of CRUX is monoblock, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monoblock configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being performed.
OZKKM CRUX is the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machine, both have technical solutions of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time forplacing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate disks up to a diameter of 625 mm and ½” gas thread tools. It also warrants the choice of placing the cutting disc in axis with the head rotation center to reduce the efforts on the axis to zero for an excellent cutting quality. The inclination of the disc can be arranged automatically from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be tilted up to 80 ° by a hydraulic piston to facilitate the loading and unloading of the processed pieces.
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Alligator ® Profile Machine
Alligator ®, profile machine, 7.5x7.5, 10x10, 15x15, 20x20, 30.5x30.5 cm width of natural and artificial stone types shaping with chip removal apparatus.
Alligator ® is manufactured in adhering to all the vital standards in other Toksel brand products. Energy smart motors, first quality bearing and machine elements, central fluid lubrication system, rigid and resistant structure, stainless material density, watertight board and high IP sealing standards, first class electrical-electronic materials, touch screen, extra cooling fans, motor and machining spindle special system and more…
Specialist Equip(Ment), Futuristic Surfaces
With 4,5,6 head solutions, the Alligator ® perfectly processes the waveform surfaces you dream of. Increased head counts allow for high quality surfaces with rapid production. As with different machines, Alligator ® also offers may features such as automatic lubrication, intensive stainless material handling, remote access and intervention, reporting, remote monitoring, warning and alarm.
Alligator ® materials are certified as well as are subject to input quality processes by the Toksel quality unit. Raw materials processed in the industry’s number of processing machines are colored on the state of the art surface covering line. Alligator ®, undergoing mechanical processes and tests at the installation site located within a 12,000 square meter facility, meets its users with the latest quality controls.
TOKSEL MACHINE
Turkey
TOKSEL MACHINE LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM FORNAX is a 5-axis monoblock bridge saw machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of FORNAX is monoblock, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monoblock configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed time by time near the factory where the coating, flooring, etc. are being performed.
OZKKM FORNAX is the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though it is a sawing machine, both have technical solutions of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time forplacing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate disks up to a diameter of 900 mm and ½” gas thread tools. It also warrants the choice of placing the cutting disc in axis with the head rotation center to reduce the efforts on the axis to zero for an excellent cutting quality. The inclination of the disc can be arranged automatically from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be tilted up to 80 ° by a hydraulic piston to facilitate the loading and unloading of the processed pieces.
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM 5 Axis / HYDRA Waterjet Machine
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Tile Cutting MachinesSingle Disc Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
High quality, durable and long life marble cutting machine will make your job easier by cutting marble, natural stone and granite platters with side cutting feature.
Our machines, which we produce with our experience in the marble and granite sector developed in Turkey, have effective and efficient designs. With the Schind 16400 marble, granite, stone cutting machine, you can speed up your production process thanks to this effective and efficient design. You save work and time with the possibility of longitudinal and 45° marble cutting.
The chassis of Schind 16400 marble, granite, stone cutting machine is produced with NPU 240 iron. Thus, you can obtain smooth parts without vibration during cutting.
You can shape your production as you want with two different sawing speed options.
Longitudinal cutting machine
45° cutting
It cuts only on X axis
Cutting head can't turn
It can be used manually
Made of NPU 240 chassis
SCHIND MACHINES
Turkey
SCHIND MACHINES
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Surface Processing Machines Bush Hammering Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EM17 - 2+4 Calibrating and Bush-Hammered Machine
• Belt Width: 700 mm
• Number Of Calibrating Heads: 2
• Calibrating Motor Power: 22 kW
• Calibrating Up–Down Motor Power: 0,55 kW
• Diameter of Calibrating Disc Tray: 650 mm
• Working Thickness: 10 – 80 mm
• Diameter Of Bush Hammering Tray: 650 mm
• Number Of Bush Hammering Heads: 4
• Bush Hammering Motor Power: 1,1 kW (126 Rpm)
• Minimum Working Width: 300 mm
• Maximum Working Width: 610 mm
• Belt Motor Power: 0,75 kW
• Belt Speed: 0 – 400 mm / min
• Total Electric Power: 51 kW
• Machine Dimensions ( W / L / H ): 1400 / 6000 / 2200 mm
https://ekizoglumakina.com/en/product/calibrating-hammered-machine-em17
Ekizoglu
Turkey
Ekizoglu Makina
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC MACHINING CENTER
GENERAL DESCRIPTION:
NC4-320 4 axes is a multifunctional working centre to process marble, granite and compound stone designed also for complex processing in short time and high quality. NC4-320 has been specially designed to ensure higher production capacity as well as the largest flexibility thanks to the very high working and displacement speed and the wide gamut of possible geometries,which allow any kind of processing ( shaping, profiling, milling, chamfering, drilling...)on marble, granite and compound stone slabs without the intervention of the operator, following a pre-set program. The machine features a mobile bridge structure, engineered using the state-of-the-art techniques of computer-assisted design, which forms a sole assembly with the uprights fixed to the based onto which the pieceholding table is applied.
AXES MOVEMENT:
The axes move by re-circulating ball screw at 60 m/min with accelerations which permit to reach the maximum speed in very short time. An automatic device to lubricate the guides and the screws grants high reliability over the time of every moving part.
The rapid displacements of the bridge along the shoulders are performed at a speed of 40 meters per minute; this make it possible to have faster work cycles, as all idle times for non-operative movements are absolutely negligible.
THE SPINDLE UNIT:
The tempered and rectified steel guides for the displacement of the spindle holding saddle (x axis) are machined onto the normalized, electrowelded steel bridge, suitably dimensioned and ribbed. The whole sliding system is protected in order to avoid any possible contamination between the processing water and lubricating oil. The spindle holding saddle moving on recirculating roller slides.
In order to obtain rapid displacement up to 40 meters per minute, which accelerates the work cycles, the movement of the spindle-holding saddle is provided by a fixed high precision rectified screw and a mobile ball bearing preharced lead nut linked directly to a digital SIMENS servo motor.
The electro-spindle adopted for this work centre is manufactured by the most important european producer of these components; it is a powerfull unit (12kw) and can attain very high rotationspeed (max 11.000 rpm) in order to use milling tools with reduced diameters and therefore, providing extremely pricise processing. The stator and the rotor are housed within the casing; the whole assembly is cooled and stabilized by means of a thermal sensor to increase its reliability. The tool cooling water and the cone cleaning air pass through the spindle at a flow rate of 60lt/min. Spindle vertical travel of same 400 mm which allows to also rough-sahpe tick billets.
CONTROL UNIT:
The NC4-320 is equipped with a latest technology continuous numerical control unit (CNC) SIMENS sinumeric of the latest generation, with digital control on PC architecture.
STRUCTURE:
The support structure of the NC4-320 is composed of a rugged closed-type structure fabricated from a single pieces of normalized welded steel, so as to quaranty the maximum rigidity, thereby providing extremely pricise processing
The bridge moves along the shoulders of the main structure, onto which the tempered and rectified steel guides are machined.
The bridge movement along the shoulders is by a system of two recirculating ball-bearing screws with precharged lead nuts, each one acting on one side of the bridge.
This solution allows to have perfect control and absolute precision oof movement and positioning. Traction is garantied by two digital servo motors, each one acting on one screw; the perfect synchronism of the two screw is constantly driven by SIMENS numerical control installed on the machine.( Gantry drive system )
The NC4-320 numerical work centre has a mobile bridge along the Y axes; this solution makes the work area completely open and accessible, which facilitates loading and unloading of work-pieces even when lifting equipment is required.
Vacuum circuit with frontal control, easily accessible to the operator.
THE WORK TABLE
The machine’s base is made up of an extremely rigid structure upon which is placed an aluminium worktable rectified to grand maximum flatness of the work area. Aluminium work table provided with grooves for mechanical fastening of vacuum pads, to ensure that, the work pieces are tightly locked in place even during heavy grinding operations 22 position line tool store positioned on the two internal sides of the machine.
THE FOURTH “C” AXES:
Among the range of accessories, it is also available a unit that allows to use tools with horizontal axes.
This unit is fixed to the spindle by means of ISO 40 coupling,as any other tool; it can continuously rotate 360 around the , “C” vertical axes, which is numerically controlled and can be locked in any position to perform retilinear cuts in all directions.
It is a continuous rotating fourth axes “C” which makes it possible to use cutting units with vertical disc to perform rectilinear cuts, or convex disc for corvilinear cuts, or 45 adjustable disc to perform inclined cut
STANDARD SUPPLY
Manuel for use and maintanance.
20 pcs. BT 40 tool stainless steel holder cones ( ½ gas )
20 pcs. Adapter for wheel cutters
20 pcs. Pullstad bolds.
4 pcs. Ø160 mm suction cups.
4 pcs. Ø 100 mm suction cups.
4 pcs. Ø 80 mm suction cups.
6 pcs. Retractable positioning reference supports.
2 pcs. Pneumatic vice.
2 pcs. Retractable suction cups Ø 100 mm.
Tool box.
Spindle motor chiller
Vacuum pump
Water filtration device.
Air filtration devices for 5 microns
Electric box air-conditioning.
Electronic Siemens handwheel.
2 pcs. Water pumps.
-
Add To Compare
Type: Stone Factory MachinesStone Slab Cutting MachinesCNC Bridge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
OZKKM 725/500 AQUILA is a monobloc bridge sawing machine that, thanks to the advanced functionality, allows every stone fabrication shop to be equipped with accurate and quick machines, without giving up on quality. The standard versions of AQUILA 725/625 is monobloc, i.e. mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be exploited also for using these machines as “building“ equipment, i.e. it can be placed from time to time near the factory where the coating, flooring, etc. are being performed.
OZKKM 725/625 AQUILA are the result of the most advanced designing on computer and the massive use of FEM analysis in order to reach a very high rigidity level of the bridge and structures. Even though they are sawing machines, both have technical solutions similar to those of a CNC machine. All the movements of the axes are on linear bearings which do not need to be adjusted. All the lubrication points have been gathered in areas which can easily be seen and reached, without disassembling guards or protections for facilitating ordinary maintenance. High level components are employed. The motors used, except for the Z axis, are servo motors with precision reducers. Especially the high speed of the X axis allows to cut down idle times as much as possible with a productivity increase (the percentage of the time that the disc stays on the material is higher with respect to the time for placing or returning to cut start).
The spindle, anchored in front of the beam to offer the utmost rigidity, can accommodate discs up to a diameter of 725 mm for the AQUILA 725, diameter of 625 mm for the AQUILA 625. The head of that machine can rotate “IN CONTINUOUS” i.e. always making the less route for positioning between one cut and another, for the benefit of productivity. Thanks to this peculiarity, it is possible to draw on the X-Y plane circles and circle arches of any size, in all the positions of the working area. The choice of placing the cutting disc in axis with the head rotation center reduces to zero the efforts on the axis for an excellent cutting quality. The inclination of the disc is manual from 0° to 90° and the possibility to interpolate the X and Y axes make the machine suitable for repetitive processing and single details even with vertical, inclined, parallel, orthogonal, diagonal and curved cuts. The machines, in the standard version are equipped with a fixed table and can be equipped with a tilting table (optional) to facilitate the loading and unloading of the processed pieces.
Ozteknik Makine
Turkey
Ozteknik Makine
Contact Supplier
Have a Question? Ask our expert
Ask now
