Multi Blade Tile Cutting Machine

Specifications
1. Wet type mosaic cutting machine is suitable for cutting big floor and wall tiles into narrow, square and diamond forms.
2. Wet type mosaic Cutting Machine also can cut tiles into many small ones with different width at one time.Wet type mosaic cutting machine cut wall & floor tile, high cutting efficiency
3. Wet Type Mosaic Cutting Machine is cutting big wall and floor tiles into small ones including mosaic. The processing width of wet type ceramic tile Cutting Machine is 25-600mm.
4. Wet type mosaic Cutting Machine also can precut tile first and then cut off at last.
5. Due to reasonable design and high working precision, it has the advantage of high cutting efficiency, high precision and high production.

Applications:
Shaft Cutting Machine is suitable for cut or slotting floor tile and stone, It can cut tile into narrow, Square, Diamond and so on. Can process the tile from 25-600/800mm or 1000/1200 to different size in one time. The characteristic of this machine is high accuracy, Low broken, Big output.

Feature
1. The bearing in bearing box is use water-cooling device to make the bearing not hot after long time use, Delay the bearing is life.
2. Use high quality bearing supporting the front and behind of the main shaft to make the shaft drive with more high precision.
3. Add manual adjust device in the operative panel to make is driver it more easy.
4. Cantilever type structure make the machine drive steady with low failure rate.

EM14 Multi-Disc Cutting Machine for Granite & Basalt
• Belt Width: 700 mm
• Working Width: 650 mm
• Working Thickness For Basalt: 10 – 150 mm
• Working Thickness For Granite: 10 – 100 mm
• Number Of Heads: 1
• Diameter Of Disc: 500 – 600 mm
• Cutting Motor Power *Optional: 30 kW
• Up – Down Motor Power: 0,75 kW
• Belt Motor Power: 0,75 kW
• Belt Speed: 3 mt / min
• Water Consumption: 125 lt / min
• Total Electric Power: 32 kW
• Machine Dimensions ( W / L / H ): 2650 / 3500 / 2000 mm
https://ekizoglumakina.com/en/product/multi-disc-cutting-machine-for-granite-basalt

The mighty stone saw (30 horsepower) model is compact, portable, and lighter - making the task of hauling much easier. This model comes with a smaller and faster 30 in. Blade for quicker cutting of your everyday stones. Effectively changing the stone cutting industry,
this mighty stone saw has been designed to be safe, sturdy and simply low maintenance. Every aspect-from components to assembly-was designed to fit all the below criteria and do it at a reasonable price.

The machine is used to make lenght sizing of the tiles and Strips.
Precision of the machine +- 0,20 mm

EM07 DOUBLE–HEAD CERAMIC & PORCELAIN CUTTING MACHINE
• Belt Width: 700 mm
• Working Width: 650 mm
• Working Thickness: 10 – 60 mm
• Number Of Cutting Heads: 2
• Disc Diameter: 300 mm
• Cutting Unit Motor Power: 2 x 11 kW
• Up – Down Control Motor Power: 0,55 kW
• Belt Motor Power: 0,75 kW
• Belt Speed: 3 mt / min
• Water Consumption: 120 lt / min
• Total Eletric Power: 24 kW
• Machine Dimensions ( W / L / H ): 2200 / 4500 / 1980 mm
https://ekizoglumakina.com/en/product/double-head-ceramic-cutting-machine

EM25-1 Stone Veneering Machine
• Belt Width: 200 mm
• Working Width: 250 mm
• Working Height: 300 mm
• Double 45 Degree Conveyor Belts
• Number Of Head: 1
• Disc Diameter: 900 mm
• Cutting Unit Motor Power: 22 kW
• Belt Motor Power: 2x 0,55 kW
• Belt Speed : 3 mt / min
• Machine Dimensions ( W / L / H ) : 2200 / 3200 / 1750 mm

EM09 - Multi-Disc Cross-Cutting Machine

• Number Of Cutting Discs: 5
• Diameter of Disc: 350 – 400 mm
• Working Thickness: 10 – 80 mm
• Working Width Min. / Max. : 250 – 3000 mm
• Cutting Disc Motor Power: 5 x 7,5 x 11 kW
• Cutting Disc Distance Setting Motor Power: 4 x 0,55 kW
• Bridge Movement Motor Power: 2,2 kW
• Belt Motor Power: 0,75 kW
• Total Electrical Power: 43 x 61 kW
• Machine Dimensions ( W / L / H ): 2300 / 6000 / 2500 mm
• Linear Guide Bridge Movement
• Pneumatic Piston Pusher
• Automatic Cutting Dimensions Control
https://ekizoglumakina.com/en/product/multi-disc-cross-cutting-machine

tile sizing line

EM25-2 STONE VENEERING MACHINE: • Belt Width: 200 mm • Working Width: 250 mm • Working Height: 300 mm • Double 45 Degree Conveyor Belts • Number Of Heads: 2 • Disc Diameter: 900 mm • Head Motor Power: 2 X 22 kW • Belt Motor Power: 2 X 0,55 kW • Belt Speed: 2 mt / min • Machine Dimensions ( W / L / H ): 2350 / 4400 / 2000 mm

EM25-3 STONE VENEERING MACHINE • Belt Width: 210 mm & 300 mm • Working Width: 250 mm • Working Height: 50 - 300 mm • Double 45 Degree Conveyor Belts • Number Of Heads: 3 • Disc Diameter *Optional: 900 mm - 700 mm - 500 mm • Head Motor Power *Optional: 2 x 22 kW, 1 x 11 kW • Belt Motor Power: 2 x 0,55 kW • Up-Down Motor Power: 0,55 kW • Belt Speed: 3- 5,5 mt / min • Machine Dimensions ( W / L / H ) : 2550 / 5700 / 2100 mm

The HM-2 cross cutting machine combines the possibility of cutting with two units with the positioning precision of the mobile spindle, employing advanced technologies when cutting strips of marble and granite. It finds its application in consecutive cuts of different sizes and is ideal for recovering waste material.

This machine is used to cut the edges of stone tiles up to 85cm (width), and its available with 2, 3 & 6 cutting heads in order to process all the standard sizes of stone with very high size accuracy and productivity.

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 680 mm
Çalışma Kalınlığı / Working Thickness 75 mm
Bant Motor Gücü / Band Engine Power 2 hp
Testere Motoru / Saw Engine 15 kw 3000 dev/dak (Rpm)
Testere Çapı / Saw Diameter 450 mm
Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 2 hp
Toplam Güç Tüketimi / Total Electricity Consumption 6,25 kw
Ebatlar / Dimensions 190 x 190 x 480 cm
Ağırlık / Weight 1500 kg
Kontrol Paneli / Control Panel PLC Otomasyon / Automation

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Çalışma Genişliği / Working Width 480 mm
Faydalı Kesim Genişliği / Useful Cutting Width 430 mm
Kesim Kafa Sayısı / Cutting Head Number 1 Adet / Piece
Takılabilir Disk Sayısı / Attechable Saw Number 30 Adet / Piece
Çalışma Kalınlığı / Working Depth 40 mm
Kesim Motor Gücü / Cutting Engine Power 22 kw
Konveyör Bant Hızı / Conveyor Band speed 0-4, 9 m/dk 0-4, 9 mt/min
Disk Çapı / Disk Diameter 300 mm
En Küçük Kesim Ebadı / The Smallest Cutting Dimensions 10x10
Kesim Motor Devri / Cutting Engine Revulations 2940 dev/dk (Rpm)
Makina Ebatları / Machine Dimensions 2450mm / 1840mm

Cutting machine multidisc with one axle HRG-60. Make one-pass cuts to different types of materials, thicknesses and sizes. Ref. 8701
Cutting machine multidisc with one axle HRG-60
The HERSEN HRG-60 multi-disc cutter is designed to perform longitudinal cutting in a single pass of different types of materials, thicknesses and sizes. In this way we can obtain baseboards, skirting boards, cut samples or recover material with stability and precision.
The material to be cut is placed on the conveyor belt, and with a guide to keep the material aligned during the cutting process.
The disc holder shaft allows us to install several discs and separate them to different sizes to obtain different width measures in the pieces. Equipped with a powerful belt driven motor (not direct drive).
It has motorized vertical regulation to adjust the depth in the cut, diameter and wear of the disc during the cutting process.

Horizontal Splitting Machine

MULTIPLE CUTTING MACHINE
TECHNICIAL SPECIFICATIONS
Cutting Engine Power 22/30 kw
Cutting Engine Speed 2800 rpm
Band Motor Power 0,55 kw
Belt Speed 65 cm / min
Saw Lowering / Lifting Motor Power 0,18 kw
Press Up Down Motor Power 0,18 kw
Maximum Cutting Width 650 mm
Minimum Cutting Width 50 mm
Maximum Cutting Thickness 120 mm
Minimum Cutting Thickness 10 mm
Saw Diameter 250-350 mm
Number of Saws Min: 2 / Max: 13 pcs
Control System Manuel Button PLC optional
Miter System Available
Water Consumption 60 liters / min
Machine Dimensions (width - length - height) 2100 - 3550 - 2000 mm
Machine Weight 1500 kg
Machine dimensions can be changed according to customer demand.

The HXL-1 Cutting Machine Performs multiple simultaneous cuts in marble slabs to obtain small strips.

The HD-1 type single axis cutting machine, with one pass, allows the longitudinal cutting of strips and tiles, trimmed after the polishing line; to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
allows the longitudinal cutting of strips and tiles, finding today application in various sectors and processing phases: to cut after the finished line to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
Technical characteristics:
It is built with a single shaft for diamond discs;
Ensures quick replacement of both the complete removable disk sleeve, which of each individual disk, thanks to the front opening and upper part of the structure and the particular construction of the spindle;
It is equipped with spacers between the disc and the disc to measure cuts to execute;
It has a support surface made of motorized thick rubber tape, with adjustable advance speed according to thickness and type of material to be cut;
It works by motor / spindle with belt transmission, with the possibility of speed variation; It guarantees a perfect longitudinal cutting precision by particular lateral guides of the conveyor belt;
It has the motor of the shaft of the disc holder positioned so that as much as possible protected from any waste from processing and melting of water, guaranteeing safety, durability and reliability;
It allows the raising and lowering of the spindle support bridge to adjust the depth of cut, to compensate the diameter of the wear of the diamond discs;
It is completed with a wide adjustable lateral material guide bar, equipped, in the insertion part, with clamps that hold the material adhered to the belt and pressed against the guide bar;
Gives the operator complete control of the controls (spindle support lock, disc depth adjustment, guide bar positioning).

The HD-2 type cutting machine with one pass allows the longitudinal cutting of strips and tiles, to make baseboards, mosaics and all kinds of stone bases. By having two axes it allows cutting high thicknesses.

General Characteristics
The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost.
The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material.
The REF4x62, is equipped with two pairs of opposed spindles so that every blade can cut one fourth of the material. This system allows dealing with the cut of hard marbles.
The hardness of the material determines the feed speed of the belt that can be adjusted from 0 to 3m/min.

Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.

The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.

The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.

One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .

By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.

The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.

Cutting machine multidisc HR-2
Ref. 8704
The HR-2 type cutting machine performs a single pass longitudinal cut to materials of different thicknesses and different sizes.
By having 2 axes it allows cutting high thicknesses.

Parallel cutting multiheads HLS
Ref. 8601
HLS multi-head parallel machine has high precision and waste reduction.
Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing.
The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.

Parallel cutting with independent heads HR4
Ref. 8602
The Parallel cutting machine type HR4 is designed for the longitudinal cutting of a single pass of strips and tiles, this machine regulates the distance between the discs guaranteeing maximum flexibility in the change of measures.

Our cutting line N.2990/2200-6+9C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the
horizontal stacker and positioned waiting to enter the production line in such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.
The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 6 heads on mobile bridge N.8000-L-6C and the transversal cutter with 9 heads N.8000-T-9C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with
precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception Suction Cup, of particular design, is made up of a rectangular plate, capable of supporting
horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-6+9C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Longitudinal cutter with 6 Ø600 heads and mobile bridge, model N.8000-L-6C.
– 1 Transversal cutter with 9 Ø600 heads and mobile bridge, model N.8000-T-9C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS BRIDGE CUTTER N.8000-L-600-6C

Characteristic Specification
Machine width 4220mm
Raceway length 6000mm
Max separation between discs 1-6 2200mm (interior)
min separation between discs 1-2-3-4-5-6 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (6)
Total installed power 100 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS BRIDGE CUTTER N.8000-T-600-9C

Characteristic Specification
Machine width 5370mm
Raceway length 5500mm
Max separation between discs 1-9 3500mm (indoors)
min separation between discs 1-2-3-4-5-6-7-8-9 300mm
diameter max. cutting disks 600mm
Maximum height pieces to be cut 100mm
Disc motor power 15 hp (8)
Total installed power 150 hp
Water consumption per disc 15 – 20 l/min
CHARACTERISTICS OF CUTTING TABLES WITH BELT N.2304/2200

Characteristic Specification
table width 2960mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 11.5m/min
Drive motor power 3 hp
CHARACTERISTICS OF ROLLER TABLE WITH SELECTION STOPS N.2590/2200

Characteristic Specification
table width 2930mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2930mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 5m/min
Motor power after cross 2.5 hp
CHARACTERISTICS OF MOTORIZED BELT TABLES N.2426/2200

Characteristic Specification
table width 2930mm
max length of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 2 hp
CHARACTERISTICS LOADING TROLLEY N.1289-V

Characteristic Specification
table dimensions 1880×3200mm
Frame dimensions 2560×1140mm
vacuum center 30 m3/h / 1.35 hp
Hydraulic power plant 4 hp
Carriage advance motor power 0.75 hp
Table motor power 0.50CV
speed scrolling cart 5m/min
speed displacement pins 7.5m/min
width max. worked 2200mm
CHARACTERISTICS ROBOT-MANIPULATOR N-3530

Characteristic Specification
Max load capacity 120 kg.
min format of work 300x300mm
vacuum center 100m3/h
Installed potency. 25 hp
cycle time min. 10” sec

General Characteristics
The new SNIC Multiple Cross Cutter machines offer extraordinarily high performance and productivity to eliminate the old bottle-necks caused by spindle translation for strip cutting.
These cutting machines, which are structurally identical, process strips up to a width of 600 mm or 800 mm and thanks to their powerful 7.5 hp motors, they cut in a single passage thickness up to 70 mm on marble. The SNIC-MCC cuts strips up to 3000 mm long and can mount up to 7 spindles with manual or sequential positioning.
The cutting movement of the disks is ensured by a single bridge sliding on high accuracy runner blocks with electronically adjustable cutting speed.
The cutting cycle is completely automated, without the intervention of the operator:
The marble strip to be sawn advances on a conveyor belt sliding over the milled table of the machine and stops automatically against a reference limit switch
The milled table automatically goes up to lift the strip away from the conveyor belt
The aligner/pusher pistons align the strip and push it against the side of the milled table
The Bridge moves the disks to cut
The cut finished, the bridge moves back to initial position
The milled table goes down and the conveyor belt moves the cut strips automatically to a motorized rollers.

Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.

The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c

Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c

Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200

Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp

Excalibur ® Lenght Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm., 2100 mm is current width of raw material, its physical structure is standardized in respect to these measurements.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.

Excalibur ® Width Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm.,1250 mm., 2100 mm is current width of raw material,its physical structure is standardized in respect to these measurements. For raw materials with marginal measurements, the solution is provided by special design chassis frames.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology.. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.

In marble industry, horizontal splitting machines are utilized in acquiring two separate pieces by horizontally cutting the strips which originally are obtained by block cutting machines. Horizontal splitting machines are designed to process marble strips of maximum 160 mm thickness and maximum 630 mm width, and may come in different designs depending on how many cutting disks the machine has.
In general; machines with 2, 4, 6 and 8 cutting disks are used for horizontal splitting processes. They are also known for improving the efficiency at tile production. In particular, they are employed to minimize errors that may ocur during block cutting and loading/unloading operations.

Alligator® provides unique production experience to its customers in sizing natural and artificial products such as ceramic, glass, composite material, marble, travertine and granite.
Its first quality certified steel manufactured body is equipped with top-end quality machine elements and apparatus.
Alligator which also called crocodile, multi disc cutting machine, mosaic cutting machine, multi-cutting machine
has single and multiple heads versions and each heads can have several blades. Alligator does the process of cutting
Stones, marbles, ceramic, brick and granite. With it’s 500, 700, 900 and 1250 mm. Cutting width versions,
Alligator® can produce thousands of product in different dimensions.

Alligator® in 2 headed, 3 headed, 4 headed mosaic sizing and cutting heads’ back and forth up and down fine movements in drawing operations are controlled from touch-operated operator panel. In precut cuttings the saw on the second head following previous drawing route may be exposed to various corrosions. Alligator ® provides an opportunity for the setting of precision of back and forth Alligator ® , despite the cutting problems that may arise from abrasion, it allows for forward-backward wear adjustment with a precision of 1/10 of a millimeter.
Alligator which also called crocodile, multi disc cutting machine, mosaic cutting machine, multi-cutting machine has single and multiple heads versions and each heads can have several blades. Alligator does the process of cutting Stones, marbles, ceramic, brick and granite. With it’s 500, 700, 900 and 1250 mm. Cutting width versions, Alligator® can produce thousands of product in different dimensions.

Alligator which also called crocodile, multi disc cutting machine, mosaic cutting machine, multi-cutting machine
has single and multiple heads versions and each heads can have several blades. Alligator does the process of cutting
Stones, marbles, ceramic, brick and granite. Up to 300 mm. Cutting width versions, Alligator® can produce
thousands of product in different dimensions.

The marble or granite strips from the calibrating and polishing machine are positioned 90 ° to the saws and cut in series.
Our machine has a strong steel body structure and it is painted with epoxy paint.
Machine dimensions may be changed according to customer request. And double head is possible.

Number of Head : 2/3 Adet
Diameter of Blade : 350 mm
Blade Motor Power : 5,5 kW
Motor Rotation : 3000 devir/dk
Max. Working Thickness : 30 mm
Max. Working Width : 650-1200 mm
Min. Working Width : 70 mm

Multidisk cutter
Machine meant to work in an assembly line work. It can obtain one or more material strips from a specific width.
Headstocks can have either one axis with more than one disk or they can have several completely independent headstocks which can be mobile or fix.
Machine with a great production capacity, reliability and strength.
Several models depending on the number of headstocks and the width of the working area so it can easily adapt to every costumer’s needs.

Introduction
Based on the original worktable slicing machine and edge cutting machine, an extra trolley is added to the cutting time for loading or unloading of stone. saving loading and unloading time and greatly improving work efficiency.
Features:
Enhanced Worktable Slicing and Edge Cutting Machine: The original worktable slicing machine and edge cutting machine have been improved.
Addition of Extra Trolley: An extra trolley has been added to the system.
Improved Loading and Unloading: The trolley assists in the loading and unloading of stone.
Time Efficiency: This addition saves loading and unloading time.
Increased Work Efficiency: The overall work efficiency is greatly improved due to the time savings.

Kerb Stone Slab Cutting Machine adopts integrated steel casting, which is easy to install and strong and durable. The spindle diameter of 120mm is processed by high-frequency and high-temperature modulation, making it durable and not easily deformed. The whole machine adopts a hydraulic lifting device, which ensures stable lifting and smooth cutting. It can be customized with three processing widths of 1.6m, 1.8m, and 2m. It is suitable for cutting high-standard curb stones, tombstones, railings, or thick plates.

High output: The equipment can be customized and can hang 10 to 20 saw blades with a diameter of 1200mm at the same time to carry out operations, greatly increasing the output.
High cutting standard: The equipment uses a PLC programmable control system and a hydraulic lifting device, and adopts a shallow fast-moving cutting method to ensure the accuracy and quality of cutting.
Good stability: The equipment motor, bearings, pressure rollers, hydraulic accessories, etc. are all from domestic and foreign first-tier brands, making the operation more stable.
Low cost of consumables: using shallow and fast cutting methods, less cutting, faster cutting, reduced knife pressure, effectively reducing diamond tip loss by 30%~50%

Excalibur ® Lenght Sizing Machine
It is used for sensitive sizing any kind of natural and artificial stones such as marble, granite, composite and ceramics.
It provides solution through different width chassis frames for raw materials in different measurements. Due to 650 mm., 2100 mm is current width of raw material, its physical structure is standardized in respect to these measurements.
The energy costs of stone processing industry are minimized through machines equipped with energy-saving engines.
Heads in Excalibur® are not moved on a shaft as it is done in non-professional systems. Movement of heads to(right-left) slithered on heavy sledge and rollers (linear sledge and roller) are located with near-zero friction.
Motion of Excalibur®’s cutting heads is supplied with servo technology. Mobility and stance abilities are in top-end precision in servo engines. Excalibur®, with servo technology, offers high-class cutting precision to customers.

Saw Diameter Ø 400450 mm
Number of Saws 1 Piece
Saw Motor Power 7.5 kW / 11 kW
Saw Driving Power 1.5 kW
Maximum Cutting Width 800 mm
Minimum Cutting Thickness 10 mm
Maximum Cutting Thickness 80 mm
Width 1500 mm
Length 4400 mm
Height 2400mm
Weight 1250 kg