If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Categories:
Waterjet Machines (28)
Stone Waxing Machine (2)
Stone Drilling, Slot Machine (9)
CNC Working Center (117)
Mosaic Cutting Machine (9)
Mosaic Assembling Machine (8)
Leveling Machine (7)
Calibrating Machine (11)
Edge Profiling, Polishing Machine (101)
Column, Balustrade Lathe Machine (12)
Stone Profiling Line Machine (1)
Stone Carving,Engraving Machine (37)
Sink Hole Cutting Machine (7)
Column, Arc Slab Cutting Machine (1)
Stone Carving Robot (17)
Chamfering,Beveling Machine (3)
Show More
Suppliers:
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
PATENTED
Automatic machine with 4 motorspindles to work with 4 different grinding wheels contemporary reducing the working time.
Ideal for processing skirting board, jolly, plinths, threshold, window sill, flat edge, bullnose and half bullnose of marble, granite, gres porcelain, single and double firing, agglomerates, etc.
ADVANTAGES OF MPM/4 SYSTEM
- Nr 4 motorspindles allow to work with 4 different wheels reducing the working time.
- The motorized conveyor belt improves the working quality and allows the production of pieces continuously.
- The guide positioned on motor side and the pressor bar guarante, during working phase, a strong stability and an high level of finishing piece.
- All adjustments are facilitated by the use of handwheels and they do not require the use of tools.
- A lateral roller allows to lay the big sizes to be worked.
Available also in 6 (MPM/6) - 8 (MPM/8) heades version to work with 6 - 8 grinding wheels of different types.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
KSD 1 is a multifunction machine ideal to automate the process for the performance of pre-set systems for fixing of slabs, claddings and panels in marble, stone and ceramic for interior and exterior applications.
The 2 independent bridges system, each one equipped with 1 ISO 40 electro-spindle, allows to carry-out processing operation in parallel way so reducing production times. CNC technology and software grant sequential programming of different types of processing, so avoiding handling or manual works or processing by the use of machines.
The great flexibility is guaranteed by the conveyor belts: it widen and shrink automatically according on the width of the piece to be processed.
Maximum slab thickness 100 mm, minimum slab dimensions 210x210 mm and maximum slab dimensions 1500x2000 mm (width x length).
Slab processing can be carried-out in different ways:
Laterally to the slab: to perform holes, milling and built-in processes;
Above to the slab: to perform holes, reliefs, millings, rims.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MULTISPINDLE CNC CUTTING CENTER
The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single.
For high production sawing up to thirteen axes.
Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°.
Independent tool wear control and compensation for each blade.
Accurate and fast thanks to brushless motors and to linear bearing guides.
Extreme precision cutting result due the rotating top cutting unit, the material doesn’t need to be shifted or re-aligned.
Automatic nesting of the cutting piece on board with defect track, due the use of and external camera, the cutting performance are guarantee from the easy to use software and the GMM patented vacuum installed on the central unit.
Ability to load electronic cutting sheet.
The machine performs automatically parallel cut, arcs and pieces shift by vacuum for allowing blade overruns.
Compact cutting line solution when equipped with automatic loading device and roller belt feeding system. Large production result up to 490 sq/m in 8 hours.
OPTIONAL
Nesting.
Camera on board.
Parametric program.
Vacuum system.
Robotic loader.
Automatic load carrier.
Motorized roller unit.
Short conveyor belt for cutting.
Short conveyor belt for unload.
Drying fun.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
PATENTED
Automatic machine with 6 motor spindles to work with 6 different grinding wheels contemporary reducing the working time.
Ideal for processing skirting board, jolly, plinths, threshold, window sill, flat edge, bullnose and half bullnose of marble, granite, gres porcelain, single and double firing, agglomerates, etc.
ADVANTAGES OF MPM/6 SYSTEM
- Nr 6 motor spindles allow to work with 6 different wheels reducing the working time.
- The motorized conveyor belt improves the working quality and allows the production of pieces continuously.
- The guide positioned on motor side and the pressor bar guaranty, during working phase, a strong stability and an high level of finishing piece.
- All adjustments are facilitated by the use of handwheels and they do not require the use of tools.
- A lateral roller allows to lay the big sizes to be worked.
- Possibility to mount also 1 or more inclined heads at 45° for special works.
- MPM/6 has more speed of material progress and it allows to optimize the cost of tools.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH:
2 drilling units
1 milling machine for the pocket
The machine is made up of a solid base in metalwork fabrication upon which two traverse chrome-plated bars are mounted. Two carts for slabs handling travel along the bars: each cart features two rows of idle wheels.
Cart motion adapts to the different sizes of the slabs thanks to a cross-head nut operated by means of a small manual wheel. The supports of the carts move along self-lubricating bushes.
The slab is hold in position by two steel guides along each of the two rows of idle wheels.
The two drilling units are placed alongside each cart. They are pneumatically operated by a hydraulic brake and are used to make holes on the slab edge.
MACHINE SPECIFICATIONS:
Slab max width 120 cm
Slab min width 20 cm
Penetration speed can be adjusted as follows:
to slowly penetrate into the slab until the diamond pointisguided(about3 ÷4mm);
to penetrate, at a higher speed, into the remaining 90% of the hole in order to complete it as fast as possible.
Once the hole has been completed, the return speed is always high.
Hole depth is varied by adjusting a magnetic sensor.
Hole positions are obtained by placing two retraction mechanical locks on one of the two carts. A milling machine is placed above one of the two drilling units in order to create the pocket. The milling machine is pneumatically operated by means of a brake and its speed can be adjusted to:
quickly reach the slab
perform final cutting.
Return speed is always at the maximum value.
The stroke corresponding to the two speeds can be adjusted by using microswitches. Cutting is aligned with the hole.
Once the slab is positioned, pocket drilling and cutting are automatic. The operator must press the corresponding button to start cutting. Either spindle can be excluded from drilling.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
HIGH-PRESSURE WATERJET SYSTEMS
The Intec-G2® can cut almost any material to 8” thick at maximum cutting speed with minimum capital outlay. These machines last longer and require less maintenance, while delivering an easy to use, fast and accurate system at a very competitive price. This series of machines is particularly well-suited for stone industry.
Softec™ Waterjet Cutting Software has been developed by TECHNI Waterjet™ with two very clear goals in mind:
1. To cut parts at minimum cost with the greatest accuracy.
2. To have a simple and intuitive interface with the operator.
The result is a comprehensive “All In One” Windows based software, that is specifically designed for Waterjet Cutting, which maximizes productivity and anyone with PC experience can learn to use quickly and easily.
At the “Heart” of Softec™ is Tru-Cut Technology™, a highly sophisticated algorithms database that determines the optimum cutting speeds and machine ramping characteristics. Once you select the material to be cut, it’s thickness and surface edge finish required, the computer will take care of the rest, ensuring the minimum cutting time for any given part. Programming edges for mitering within seconds. All with one software!
Softec Nest utilizes advance nesting algorithms which have been developed by one of the world’s largest and most awarded CAD and nesting software developers - Geometric Global.
Benefits Include:
Improves profitability by minimising rapid feed times.
Increasing both nesting speed and material yield.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
PATENTED
Automatic machine with 8 motor spindles to work with 8 different grinding wheels contemporary reducing the working time.
Ideal for processing skirting board, jolly, plinths, threshold, window sill, flat edge, bullnose and half bullnose of marble, granite, gres porcelain, single and double firing, agglomerates, etc.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
HIGH-PRESSURE WATERJET SYSTEMS
The Intec-G2® can cut almost any material to 4” thick at maximum cutting speed with minimum capital outlay. These machines last longer and require less maintenance, while delivering an easy to use, fast and accurate system at a very competitive price. This series of machines is particularly well-suited for stone industry.
Softec™ Waterjet Cutting Software has been developed by TECHNI Waterjet™ with two very clear goals in mind:
1. To cut parts at minimum cost with the greatest accuracy.
2. To have a simple and intuitive interface with the operator.
The result is a comprehensive “All In One” Windows based software, that is specifically designed for Waterjet Cutting, which maximizes productivity and anyone with PC experience can learn to use quickly and easily.
At the “Heart” of Softec™ is Tru-Cut Technology™, a highly sophisticated algorithms database that determines the optimum cutting speeds and machine ramping characteristics. Once you select the material to be cut, it’s thickness and surface edge finish required, the computer will take care of the rest, ensuring the minimum cutting time for any given part. Programming edges for mitering within seconds. All with one software!
Softec Nest utilizes advance nesting algorithms which have been developed by one of the world’s largest and most awarded CAD and nesting software developers - Geometric Global.
Benefits Include:
Improves profitability by minimising rapid feed times.
Increasing both nesting speed and material yield.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
NOVELTY
MGP/3 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials.
It is a revolutionary model that allows two different types of machining with just one automated, compact machine:
- a 45° bevel for creating steps.
- edging for skirting, doorsteps and window sills, with bullnose and half bullnose edges.
MGP/3 consists of 3 motor-spindles for tools, which can be angled to create a 45° bevel for steps or adjusted to an upright position for creating edges.
Available also in the five-head version to simultaneously operate five different grinding wheels and cut down working time.
MGP/5 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials.
It is a revolutionary model that allows two different types of machining with just one automated, compact machine:
- a 45° bevel for creating steps.
- edging for skirting, doorsteps and window sills, with bullnose and half bullnose edges.
MGP/5 consists of 5 motor-spindles for tools, which can be angled to create a 45° bevel for steps or adjusted to an upright position for creating edges.
MGP/5 allows to simultaneously operate five different grinding wheels and cut down working time.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH :
4 drilling units for horizontal holes
2 vertical milling machines for hole pocket
2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, and rebated kerf (with shaped wheel), QM (bevel cut)
The machine features:
2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
2 cutting units for the pocket placed above two drilling units on each side of the machine
2 cutting units for slot/kerf placed above two drilling units on each side of the machine
2 mechanical stops to hold the slab in position during processing
MACHINE SPECIFICATIONS
Slab max width: 188 cm
Slab min width: 26 cm
Max distance between 2 holes:
160 cm (without vertical milling machines) 130 cm (with vertical milling machines)
Min distance between 2 holes without pocket:20 cm
Slab conveying carts
Slab conveying carts are made up of two traverse beams along which two beams equipped with motor- operated slab conveyors move. The width of each beam can be adjusted to process slabs of different sizes.
The width can be adjusted manually by using a small wheel. The carts move along chrome-plated bars with precision bushes.
Each cart also features a slab guide and an end stop pneumatically operated in order to process the slab when it is not moving (holes and hole pockets).
The back/forth motion of the slab conveyors can be selected from the electric panel.
With forward motion, the slab enters and exits from the opposite end. With backward motion, the processed slab is brought back to its starting point in order to be discharged.
Drilling units
By means of a small wheel, four drilling units, two on each side of the machine, can be manually placed longitudinally on two chrome-plated bars of large diameter the whole length of the machine.
Holes are made when the slab is not moving and held in position by means of two guides and two mechanical stops.
The drilling units are pneumatically operated by means of a hydraulic brake.
Feeding has two speeds:
the first allows for slow penetration of the points into the slab until the points are guided by the hole itself
the second allows for drilling at optimum speed. Return stroke is always at high speed
Return stroke is always at high speed.
One or more spindles can be excluded from processing by selecting them on the operator’s touch screen.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Zenit is the a 3 interpolated axes CNC polishing / calibrating machine with automatic tools change, for the treatment of marble, granite and agglomerate surfaces. It allows to calibrate, polish, smooth, brush and also drill, to perform engravings, straight and curvilinear cuts with incremental passes by means of diamond milling tools.
It is an extremely flexible machine, ideal for those who need a complete equipment to treat even particularly delicate surfaces or to finish mosaics or inlays.
Its strength lies in the dual-control system of pneumatic and mechanical handling of the polishing and calibrating tool; the result is an extreme precision with excellent performances on any material.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
HIGH-PRESSURE WATERJET SYSTEMS
The Intec-G2® can cut almost any material to 8” thick at maximum cutting speed with minimum capital outlay. These machines last longer and require less maintenance, while delivering an easy to use, fast and accurate system at a very competitive price. This series of machines is particularly well-suited for stone industry.
Softec™ Waterjet Cutting Software has been developed by TECHNI Waterjet™ with two very clear goals in mind:
1. To cut parts at minimum cost with the greatest accuracy.
2. To have a simple and intuitive interface with the operator.
The result is a comprehensive “All In One” Windows based software, that is specifically designed for Waterjet Cutting, which maximizes productivity and anyone with PC experience can learn to use quickly and easily.
At the “Heart” of Softec™ is Tru-Cut Technology™, a highly sophisticated algorithms database that determines the optimum cutting speeds and machine ramping characteristics. Once you select the material to be cut, it’s thickness and surface edge finish required, the computer will take care of the rest, ensuring the minimum cutting time for any given part. Programming edges for mitering within seconds. All with one software!
Softec Nest utilizes advance nesting algorithms which have been developed by one of the world’s largest and most awarded CAD and nesting software developers - Geometric Global.
Benefits Include:
Improves profitability by minimising rapid feed times.
Increasing both nesting speed and material yield.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesLeveling Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite
Machinery Function Features:
Machine that makes “V” cuts on marble granite and engineered stone slabs by means of diamond discs
Fixed bench machine designed and manufactured according to the up-to date concepts and fitted for making 45° degrees cut to realise V-grooves. The high speed of the holding spindle carriage and its special automatic devices allow it to achieve very high production levels.
Features
THE EXCLUSIVE FEATURES OF A COMANDULLI MACHINE: VOLCANO
Main protection covers in stainless steel.
Strong electrowelded machine main structure fully worked by a milling machine
To prevent the machinery from rust, its structure and main parts are metallized through a modern treatment that follows different phases: sandblasting, metallization with zinc wire, priming coat with zinc phosphate epoxy product and final painting with a high solid polyacrylic enamel. Covers submitted to cataphoresis treatment which follows different phases: degreasing of the piece, spry or dipping pre-treatment, electroplating bath which uses the electric power to plate the paint as to make a uniform skin, after-washing and furnace baking.
Monolithic machine (made in one piece – excluding the rollers) that does not need foundations but can lay on the floor.
Carter in acciaio inox.
EQUIPMENTS:
Machine with a fixed bench equipped with n. 2 spindles equipped with diamond wheels diam. 300 mm at 45° (one opposed to the other) to realise sloping cuts.
Spindles assembled on a travelling holding spindle carriage, with pinion/rack system operated by a grar motor; speed 0÷30 m/1’; Spindle sliding on screw ball guides placed on the lower part of the bench, properly protected against water.
Electrowelded loading bench equipped with n. 7 lines of omnidirectional rollers for loading and unloading the slabs.
Reference bar for the workpiece alignment.
Set of pneumatic holding slab pistons (no. 4).
Electric equipment, controlled by PLC; cutting controls both in automatic or manual.
Roller table to support long pieces while working their heads.
Kit including keys, abrasive wheels etc..
Comandulli
Italy
Comandulli Costruzioni Meccaniche S.R.L.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic machine with 2, 3, 4, 5 or 6 motor-spindles to bevel at 45° the slabs in gres porcelain, marble and stone which are necessary for the composition of steps.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
QUADRIX XL 1600 is a 5 interpolated axes CNC working centre with Z axis stroke of 1000mm, rotating blade head swiveling from 0 to +180 degrees and tilting from 0 to 90 degrees, to perform orthogonal cuts up to 635mm, ideal machine for performing oblique, circular, elliptical cuts, two-dimensional and three-dimensional digging and carving of blocks.
The "Top" version can use diamond tools such as: milling wheels, drill cores, horizontal blade.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Drilling, Slot Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
EQUIPPED WITH
4 horizontal drilling spindles
2 milling machines for pockets
2 horizontal milling machines for slot, stopped slot, prolonged slot, kerf, rebated kerf (with shaped wheel), QM (bevel cut)
The machine features:
2 slab conveyors with manually adjusted width for processing slabs of different sizes. Alongside each conveyor there is a guide to keep the slab aligned
4 drilling units, 2 on each side of the machine, which can travel along the whole length of the machine
2 cutting units for the pocket placed above two drilling units on each side of the machine
2 cutting units for slot/kerf placed above two drilling units on each side of the machine
2 mechanical stops to hold the slab in position during processing.
Work cycle
Processing occurs when the slab is not moving. The two conveyors move the slab to the mechanical stops. Before reaching them, speed is reduced to allow for smooth, precise positioning.
Then, drilling and pocket cutting are performed, or slots and kerfs are made. Once processing is over, the slab is moved backwards, the two mechanical stops retract, and the conveyors bring the slab to the discharge point.
A new slab is placed on the conveyors, and cycle is started again.
Machine specifications:
Slab max width: 180 cm
Slab min width: 25 cm
Max distance between 2 holes: 190 cm
Min distance between 2 holes without milling machine: 18 cm
Min distance between 2 holes with milling machine: 23 cm
Handling
Spindle handilng along the whole length of the machine and of the two carts is operated along precision guides by means of recirculating ball slide guides.
Motion is operated by precision rolled screws with recirculating ball bushes and precision gearboxes. The four spindles and the two carts are operated by brushless motors coupled with precision gearboxes and driven by electronic drivers which are in turn CNC-operated.
Precision in positioning
Precision in positioning is lower than +/- 0.2 mm.
Output
Depending on the material used (marble, tender or hard granite) the typical hole with 6-8 mm diameter and 25-30 mm depth is completed in 20-30 seconds. The distance between two slabs is about 20 cm which entails a motion time of about 20 seconds. Therefore, 4 holes are completed in 40-50 seconds, with an output of 290-360 holes per hour. The average repositioning time is about 5 seconds.
Lubrication
Lubrication of moving parts is centralized and automated. An automated lubrication cycle for periods when the machine is not used is also available.
Positioning system
It is automated thanks to an industrial computer. The operator must set slab width, hole position with reference to the mechanical stops, make requests for holes with or without pocket, and the automatic system will provide the necessary motions for the drilling heads and the carts.
Once the machine is positioned, the automated work cycle is started.
The height of the drilling spindles is adjusted by using a motor-reducer operated by two buttons on the spindle columns.
4 holes on each side of the slab can be made, along with two pockets on one side, as well as slots, prolonged slots, and kerfs.
The computer features also the following utilities:
Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs (on the machine) sorted by order
Generation of drilling programs, storing of the programs by code (brand), list of and changes to the programs on PC so that they can be later stored in the machine by using a floppy disc, and sorted by order
Displaying of drilling programs
Displaying of machine status (diagnostics)
Automatic synchronising
Storing and displaying of drilled slabs and of the holes made as of a given date (password required) Lubrication cycles for periods when the machine is not used.
Prometec
Italy
Prometec s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Sandstone
Machinery Function Features:
ENZO WATER JET – 3-axes water-jet cutting machines to executes cuts and shapes to virtually any kind of material.
Thanks to its high mechanical technology all the working operations ensures the maximum working accuracy and reliability.
Stainless steel water tank separate from the machine structure to avoid any deformation risks.
Advanced CNC control with CADCAM application to ensure the best results in terms of flexibility and ease of use.
- N.3 axes working operations interpolated by brushless motors.
- Working operations managed by advanced CN system with CADCAM application
- Electrowelded structure for the higher stability
- Bridge structure and working head sliding on linear guides with ball bearing units
- Y-axis movement based on 2 screws transmissions powered by syncronized brushless motors with encoder
- X-axis head movement based on screw transmission powered by brushless motor
- PVC protective caps for transmission units
- Fully stainless steel based water tank
MGI
Italy
MGI Technology srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
Automatic machine with 6 spindles to make 2 different products on the same machine. It has been projected to produce both jollies (45°) for steps assembling that bullnose skirting on porcelain tiles, marble, granite and agglomerates.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Profiling Line Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
SPL is the new profiling machine suitable to create different profiles on the edge of porcelain, marble and granit material.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MAS is a fully equipped multipurpose machine which can be used for cutting, edge profiling, polishing and chamfering straight edges by simply changing the head tool.
ADVANTAGES
MAS is a multipurpose saw for cutting stone slabs as well as profiling, polishing and chamfering straight edges:
Multipurpose machine fully customizable according to customer requirements;
The atmost precision is guaranteed by a compressed, rectified and chromed “active beam”;
Motorized head travel with variable speed on X and Z-axis in both forward and backward directions;
2-speed main motor to optimize machining of all types of stone: for marble (7.5kW=10HP) and for granite (5.5kW=7.5HP).
Achilli
Italy
Achilli s.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite
Machinery Function Features:
Machine to polish and bevel the edge of marble, granite, agglomerates. It is made of 4 polishing spindles and 2 spindles at 45° for chamfering.
The spindles have a higher power and they are able to mount any tool, both abrasive and diamond ones. The water injection comes from the centre of tool for a better efficiency. All spindles have a pneumatic control, driven by P.L.C.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The new MVB/4 is an automatic machine able to carry out both the cutting and the profiling of skirting pieces, doorsteps and window sills, with bullnose and half bullnose edges, in a single passage and with just one movement of the piece. Alternatively, it can make45° mitering for production of kitchen and bathroom top and steps.
MVB/4 makes the production of high quality elements possible on ceramic, gres porcelain, marble, granite and agglomerate materials, in a fast and simple way, with just one automated compact machine
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Automatic multi-spindle belt polishing machines for the execution of round and flat edges on any type of material (marble, granite, composite and cement agglomerates). The range of GMM edge polishing machines includes horizontal and vertical machines able to process thicknesses from 4.5 up to 100 mm. The shaping of the profiles is performed with universal abrasive wheels (avoiding the use of expensive shaped wheels). The machine management is entrusted to an electronic control of the latest generation (operating in 4.0 ready logic) supported by a SW entirely developed by GMM to ensure an easy and intuitive use to the operators. The oscillating bar (which supports the hydraulic motors with the abrasives for polishing) of the Toro bull-nosing machine, is driven by 2 brushless motors in order to guarantee high precision and best quality of the profile. All surfaces are treated with sandblasting, cold galvanizing primer and two-component painting. All the carters are in fiberglass or stainless steel.
FEATURES
MACHINE BED
Strong electroweld, fully worked with numeric control machines. Sanding followed by a cold-galvanized treatment and two successive coats of dual component epoxy paint.
BELT
Three-layer, 30 cm wide belt has a grooved guide on the base to guarantee the maximum adherence of the belt to the line to be worked. Belt gliding surface is ground and covered with a special interchangeable wear-resistant steel plate.
SPINDLES
Standard: identical on all work units. Fitted with a bellows for slide protection and having a double labyrinth seal to protect from water, moisture and dust. To further guarantee the seal, there is a slight internal pressure.
SPINDLE-HOLDER BAR
Polishes the edges, using universal tools. The spindles, each one controlled by its own electric motor (protection IP65), are housed in a sturdy sealed bar which empties the water directly into the tank. The computerized system allows programming by inverter a microoscillation (“swing”) above all on straight, thick fl at edges to increase the work speed and improve the degree of polishing. The abrasive discs used are 130 or 150 mm in diameter.
BEVELLERS
Mounted in opposition at 45° angles, they make a double bevel on the straight edge using a 130 mm diameter abrasive disc. The first pair of bevels has a mechanical stop for the use of diamond tools.
TOUCH SCREEN
Allow to manage all the functions of the machine. In particular it is possible to program the entrance and the exit of each unit to ensure quality and precision on all specific working. Are allowed the partial workings (Optional).
ROLLERS
The machine is equipped with two, 1-meter rollers, one at the entrance and one at the exit, respectively. Each roller is equipped with side rails to prevent the piece from tipping.
TANKS
The machine is equipped with several stainless steel water collection tanks to maintain proper functioning and the duration of individual components.
GUARDS
The external casings are in sturdy fibreglass while the pressing bar and the single unit guards are in stainless steel.
OPTIONAL
Partial bevelling work.
Calibrating.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
KSD 1 is a multifunction machine ideal to automate the process for the performance of pre-set systems for fixing of slabs, claddings and panels in marble, stone and ceramic for interior and exterior applications.
The 2 independent bridges system, each one equipped with 1 ISO 40 electro-spindle, allows to carry-out processing operation in parallel way so reducing production times. CNC technology and software grant sequential programming of different types of processing, so avoiding handling or manual works or processing by the use of machines.
The great flexibility is guaranteed by the conveyor belts: it widen and shrink automatically according on the width of the piece to be processed.
Maximum slab thickness 100 mm, minimum slab dimensions 210x210 mm and maximum slab dimensions 1500x2000 mm (width x length).
Slab processing can be carried-out in different ways:
Laterally to the slab: to perform holes, milling and built-in processes;
Above to the slab: to perform holes, reliefs, millings, rims.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesLeveling Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
MRC is an automatic machine designed to finish the edge of squared or rectangular material and to bevel the upper edge. It is ideal for marble, granite, gres porcelain, single and double firing, agglomerates and brick.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
AUTOMATIC MULTISPINDLE POLISHING MACHINE FOR FLAT AND ROUND EDGES
The Toro range of inline machines have been designed to work on all types of marble, granite, stone and agglomerates. These machines are versatile in order for them to work in small, medium or large size establishments in the building, design and monumental. The shaping of the rounded profiles is carried out with universal tools, completely eliminating the use of expensive shaped grinding wheels. Easy to use, these machines can be made to meet all types of needs both in the small and large industry. A new generation of Toro includes a friendly use horizontal inline automatic multi-spindle machines, driven by computerized electronic controls over a precise building mechanics, result of tested, appreciated and unequalled GMM experience.
BODY
Made in electro-welded structure, machined with cnc machinery. Thermal treatment to unstress materials due to welding. Surface for the belt is rectified and lined with a wear-resistant steel plate, which can be replaced. Sandblasting and special treatment with zinc base and double component paints.
SPINDLES
Same on all units. Cover for safety on all moving parts and a double labyrinth seal for better water and humidity resistance.
BEVELS
They make the double bevel on the straight edge. They are mounted at 45°. The two fi rst (up and down) have the possibility to use diamond tools and to reach a fi x position driven by the computerized system to obtain the perfect required bevel. Their entry and exit on the material is programmable regardless of the work on the straight edge.
CALIBRATORS, DRIP CUT, MULTI-FUNCTIONAL UNIT
Can be placed at the entry and exit of the machine. With various configurations, they allow to work with the axis in vertical position, inclined and horizontal. On these units we can install levigating heads, profiling tools, bush hammering unit, discs for cutting. In order to work properly, they have double speed motors.
OSCILLATING BAR
Allows to perform and polish the chosen profile using universal tools. The bar, made in strong aluminium casting, is made to oscillate by means of a double reducer and lever moved by two brushless motors.
The spindles which are governed by separate hydraulic motors have various speeds from 2200 rev/min to 1000 rev/min, starting from the universal diamond tool up to the last polishing grain.
The computerized system allows programming a micro-oscillation (“swing”) on straight edges or on fl at inclined profiles.
PROGRAMMING
With its 8” touch screen it is possible to do all the works necessary in a very simple and quick manner. By setting the profile and the thickness the machine positions all the heads automatically eliminating huge time wasting procedures, previously done manually.
In less than a minute the machine can be changed from one work to another. It is possible to program each single head to optimize the entry on the piece to be worked or to execute partial work on bull-nose or fl at profiles. It is possible to carry out analysis and statistics regarding the times and quantities produced, as well as processing quotes. Also it is possible to memorize all the parameters used to produce a certain piece and recall this data when necessary.
ELECTRICAL CABINET
Is positioned on the machine.
PROTECTIONS
The covers are all in heavy duty fi berglass on the front side of the machines and in stainless steel on all single units. All the spindles have pressure gauge and seperate pressure regulation and can be excluded or work in semi or fully automatic mode. Particular attention has been paid to the shape of the machine in order for it to be easy for normal maintenance work and change of tooling.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The new MVB/5 is an automatic machine able to carry out both the cutting and the profiling of skirting pieces, doorsteps and window sills, with bullnose and half bullnose edges, in a single passage and with just one movement of the piece. Alternatively, it can make45° mitering for production of kitchen and bathroom top and steps.
MVB/5 makes the production of high quality elements possible on ceramic, gres porcelain, marble, granite and agglomerate materials, in a fast and simple way, with just one automated compact machine
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
QUADRIX DV 1100 is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 1000 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs.
The possibility to mount blade having max diameter of 1100 mm grants the possibility to cut up to 410 mm thickness .
QUADRIX DV 1100 allows to produce large dimensions items but also to perform extremely precise finishing; a high production is granted by the sliding system of X and Y axes on linear guides and racks both in oil bath lubrication. The motion is given by brushless motors coupled to high precision gearboxes. It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 50 type connection diamond tools, such as end mill, milling wheel and a horizontal blade.
The QUADRIX DV 1100 is suitable for those looking for a powerful and flexible machine; it can be set up as a simple machine for cutting or as a work center, complete with tool holder, automatic tool change and lathe for the performance of shower trays, sinks, window frames, frames, columns, claddings and products in general for furniture and building.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
AUTOMATIC STRAIGHT EDGE POLISHER
The Costa range of inline machines have been designed to work on all types of marble, granite, stone and agglomerates. These machines are versatile in order for them to work in small, medium or large size establishments in the building, design and monumental. Easy to use, these machines can be made to measure for all types off needs, both in the small and large industry.
FEATURES
BODY
Made in electro-welded structure, machined with cnc machinery. Thermal treatment to unstress materials due to welding. Surface for the belt is rectified and lined with a stainless steel plate, which can be replaced. Sandblasting and special treatment with zinc base and double component paints.
BELT
Three-layer, 30 cm wide belt has a grooved guide on the base to guarantee the maximum adherence of the belt to the line to be worked. Belt gliding surface is ground and covered with a special interchangeable wear-resistant steel plate.
SPINDLES
Same on all units. Cover for safety on all moving parts and a double labyrinth seal for better water and humidity resistance.
BEVELS
They make the double bevel on the straight edge. They are mounted at 45°. The two fi rst (up and down) have the possibility to use diamond tools and to reach a fi x position driven by the computerized system to obtain the perfect required bevel. Their entry and exit on the material is programmable regardless of the work on the straight edge.
CALIBRATORS, DRIP CUT, MULTI-FUNCTIONAL UNITS
Can be placed at the entry and exit of the machine. With various configurations, they allow to work with the axis in vertical position, inclined and horizontal. On these units we can install levigating heads, profiling tools, bush hammering unit, discs for cutting. In order to work properly we have motors with double speed.
BAR WITH MICRO OSCILLATING "BRANDEGGIO"
Allows to polish the edge using universal tools. The spindles all run with separate motors and are placed in a strong aluminium casting bar. A computerized system allows to program the micro-oscillating on the straight edges with large thickness.
TOUCH SCREEN
Electronics of the latest generation which allow simple and intuitive automatic programming the intervention of each units, also partial. Setting out of the thickness of the work piece there's the automatic positioning of: pressing bar and calibrator. The opening of the water and the start up of all electric motors is driven in automatic by the material arrival. This allow an important energy saving. It is possible to carry out analysis and statistics regarding the times and quantities produced, as well as processing quotes. Also it is possible to memorize all the parameters used to produce a certain piece and recall this data when necessary.
ELECTRICAL BOX
Is positioned on the machine.
PROTECTIONS
The covers are all in heavy duty fiberglass on the front side of the machines and in stainless steel on all single units. All the spindles have pressure gauge and separate pressure regulation.
Particular attention has been paid to the configuration of the machine in order for it to be easy for normal maintenance work and change of tooling.
OPTIONAL
Bar code reader.
Calibratore pneumatico ribaltabile (0°-90°) 1500/3000 rpm, 4,3/5,7 hp:
- Frontal cut;
- Upper calibration;
- Upper honing;
- Rough shaping;
- Lower calibration;
- Frontal calibration;
- Upper water drip cut (through cut);
- Lower drip cut (through cut);
- Inclined cut.
Multifunction, 1500/3000 rpm, 4,3/5,7 hp:
- upper through drip cut;
- upper honing;
- inclined cut;
- antisliping bush hammering (programmable).
Through cut spindles at 600 mm, 3000 Rpm, 4,5 hp:
- upper programmable cut (max 600 mm from the edge).
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CYBERSTONE is the new generation robotized production system with 6/7/8 interpolated axes, designed to be a highly flexible tool for the performance of elements and objects of any size and material with heights up to 3300 mm. It is particularly suitable for sculptures, rectilinear, concave, convex, arched, elliptic shapes, single or incremental pass and excavations of two-dimensional and three-dimensional section blocks; it is also suitable for the execution of oblique, circular, elliptical cuts, inclined up to a thickness of 260 mm. Thanks to the rotating platform, it is possible to work the piece at 360 ° without moving or repositioning it for the working shots. Its mobile arm with 6 interpolated axes allows to perform 180 ° undercuts; the ISO 50 connection allows the use of diamond tools of different types, such as drills, grinding wheels, wheels for rebates, finger bits, shaping tips and cutting discs with diameter 650 or 850 mm.
This robot allows to make extremely precise finishing and to create sinks, tubs, tables, chairs, shower trays, vases, statues, columns and other architectural elements in general. CYBERSTONE meets the most demanding requirements, maximizes productivity, and, thanks to the numerous accessories, can be set up as a working center for single pieces of any size or for mass production.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone
Machinery Function Features:
AUTOMATIC MACHINE FOR CUTTING AND EDGE-BEVELLING
MTB/3 ANTIMUS baby is the first and only compact, automatic machine able to cut and profile skirting pieces in a single passage!
It is a revolutionary machine that meets the needs of ceramic, marble and stone laboratories, with small to medium productions.
Until now such workshops either had to use two separate manual machines (one for cutting and one for edge-profiling) or rely upon external service companies, with an incredible loss of time.
MTB/3 ANTIMUS - AUTOMATIC MACHINE FOR CUTTING AND EDGE-BEVELLING
PATENTED
CUTTING AND PROFILING IN ONLY 1 STEP AND WITH ONLY 1 MACHINE
MTB/3 ANTIMUS is the first and only compact, automatic belt machine able to carry out in a single passage and with just one movement of the piece, both the cutting and the profiling of the skirting! It is a revolutionary machine that meets the needs of ceramic, marble and stone workshops, with small to medium weekly production needs. Until now such workshops either had to use two separate manual machines (one for cutting and one for edge-profiling) or rely upon external service companies, with an incredible loss of time.
ADVANTAGES OF MTB/3 ANTIMUS SYSTEM
Minimum dimension
Monoblock machine
Low consumption of electric energy
Constancy of production quality
Very low initial investment
Total automation of production cycle
"END WORKING CYCLE": tile enters and bullnose goes out, without any necessary movement from the operator
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
CUTTING AND PROFILING
IN ONLY 1 STEP AND
WITH ONLY 1 MACHINE
MTB/5 ANTIMUS is the first and only compact, automatic belt machine able to carry out in a single passage and with just one movement of the piece, both the cutting and the profiling of the skirting! It is a revolutionary machine that meets the needs of ceramic, marble and stone workshops, with small to medium weekly production needs. Until now such workshops either had to use two separate manual machines (one for cutting and one for edge-profiling) or rely upon external service companies, with an incredible loss of time.
ADVANTAGES OF MTB/5 ANTIMUS SYSTEM
Minimum dimension
Monoblock machine
Low consumption of electric energy
Constancy of production quality
Very low initial investment
Total automation of production cycle
"END WORKING CYCLE": tile enters and bullnose goes out, without any necessary movement from the operator
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Waxing Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
LUXBRETON CGA200/4
STURDINESS
The structure of the monobloc steel frame gives the machine a considerable rigidity. The brush-holding spindles are lodged inside cast-iron housings and are singularly controlled by a pair of pneumatic pistons to insure their smooth raise/lower.
LONG WORKING AUTONOMY
The 3 stainless steel wax reservoirs, equipped with level gauges, have a full 3.5 lt. capacity each, guaranteeing a working autonomy of around 180/350 m2 of granite slabs. The 3 reservoirs can be filled with different waxes as they work independently.
USER-FRIENDLINESS
The machine does not require any particular control: it is sufficient to adjust the width of the slabs under working and set the timers that control the wax metering.
The wax reservoirs are mounted in a frontal position, easily accessible to the operator for topping off operations.
Structure and spindles
The support structure consists of an arc-welded steel monobloc to be fixed to the floor, with no need of civil works. The beam mounting four brush holding spindles runs on guides machined on the support structure, and is actuated by an inverter controlled self-braking gearmotor. The four brush holding spindles consist of a heavy-duty cast iron casing inside which slides a suitably lubricated rotating shaft, which is lifted/lowered by means of a pair of pistons with constantly protected stylus. The centralized lubricating points are conveniently located for the operator, on the front part of each spindle.
Control panel
The control panel is fixed to a movable,ergonomic, suspended arm and includes a 5,7-inch colour graphic touch-screen with button control for the machine control and programming.
Accurate distribution of the wax
The machine is equipped with three vessels containing the wax, which are positioned at the machine front for easy inspection.
The wax spraying cycles and the position of wax sprayers are coordinated with the position of each single brush in order to guarantee the perfect waxing of the slab whole surface.
Each spindle holds a brush with bristles coming in different consistencies, diameter and rotation speed so as to spread and polish the wax perfectly.
The wax feeding duct is automatically cleaned at programmed intervals by means of an air flow thus preventing any possible residue of wax.
The last three spindles polish to perfection the wax that the first waxing spindle has applied to the slab.
Slab profile reading
The slab profile reader provided with through-beam photoelectric barrier for the automatic adjustment of the beam travel and the automatic spindle lifting/lowering is positioned at the front of the machine.
Wax dosage
The precise wax batching system combined with an efficient programming software enable to minimize wax consumption. The solenoid valve for wax batching is directly mounted on the spindle axis, therefore the wax path is remarkably shortened and dosage is performed with great precision.
Italy
Breton S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
MTB/6 ANTIMUS SPECIAL is the first and only compact, automatic belt machine able to carry out in a single passage and with just one movement of the piece, both the cutting and the profiling of the skirting!
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
The QUADRIX DG 1000 - 1300 – 1600 - 2000 are large dimension CNC multifunctional work centres with 5/6 interpolated axis with Z stroke from 1000 up to 2000 mm. These models are greatly used for working profiles and shapes of all types, straight, concave, convex, arches, drilling in 2 and 3 dimensional works, columns, sculptures and all types of cutting process.
The Quadrix DG are work centres designed to be very versatile with high production capacities. Thanks to its steel bridge and increased dimensions, to all the movements of each axis given by brushless motors and high precision gearboxes running on linear bearings and gears on both X and Y axis in oil bath, it is possible to produce precise various types of forms, sizes and objects.
The machines work with an electro-spindle controlled by inverter with an ISO 50 connection which can hold discs from 500 mm diam to 1200 mm and diamond tools such as router bits and drill bits to perform a wide range of processing.
The machines can be equipped with lathe and rotating platform controlled by CNC control, so bringing the axis controlled to 6. It is also possible to fit the machine as a bridge saw or as a complete CNC work centre thanks to the wide range of accessories available.
The QUADRIX DG are suited for the customer who wants to grow the company in order to open new doors and projects from an always demanding market of designers and architects.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesLeveling Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
MRC Smart is an automatic machine designed to finish the edge of squared or rectangular material and to bevel the upper edge. It is ideal for marble, granite, gres porcelain, single and double firing, agglomerates and brick.
Compared to MRC, the MRC Smart model has higher productivity since the motors are more powerful and the tools have a larger diameter. It is also equipped with a self-centring guide to align the material in entrance and optimize wheel consumption.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
MBC is an automatic machine for ceramic, gres porcelain, marble and granite bevelling.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
QUADRIX DG - 1600
NUMERICAL CONTROL (NC) LARGE-SIZE CUTTING CENTER WITH 5 INTERPOLATED AXES FOR:
CUTTING, PROFILING, EXCAVATING, TURNING, MAKING BAS-RELIEFS AND CARVING ON SLABS AND BLOCKS OF MARBLE,GRANITE AND STONE.
TOOL CHANGEOVER: MANUAL IN THE “MTC” VERSION AUTOMATIC IN THE “ATC” VERSION
FIXED WORK PLATFORM WITH ALUMINUM MATERIAL SUPPORT TABLE
PROTECTION, POSITIONED ON THE RIGHT SIDE OF THE MACHINE AND CONTAINING ALL THE ELECTRIC AND ELECTRONIC EQUIPMENT THAT MANAGES THE MACHINE.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
Machinery Function Features:
MBC Smart is an automatic machine for ceramic, gres porcelain, marble and granite bevelling.
CompactLine
Italy
Ferrari & Cigarini SRL
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The ECHO 725 CNC is a 5/6 axis interpolated milling machine particularly flexible, suitable for the production of different types of products such as kitchen tops, bathroom tops, shower trays, engravings, bas-reliefs and various coatings for the building industry.
It is a machine that allows a wide range of processes, from cutting, to milling, drilling, shaping and, thanks to the countless accessories, it is possible to carry out these operations simultaneously without moving the piece from the bench or prolonged machine stops.
Thanks to the sliding of the X and Y axes that occur on linear guides with recirculating balls and racks both with oil bath lubrication and with the new structure of the bridge and the steel carriage, the ECHO 725 CNC allows to obtain products with extremely fine finishes precise.
ECHO 725 CNC is suitable for those in need of power, high output and small footprint. The different levels of customization of the machine make it possible to satisfy the most demanding customer requirements and this is made possible by the wide range of accessories available.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesColumn, Balustrade Lathe Machine
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is operated with hydraulic feed and simultaneously the realization of n. 4 round columns done corresponds the same number of square columns.
Italy
Officine Carlino Fernando
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving Robot
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Lapisystem from T&D Robotics , world leader in the robotic applications in the stone.
T&D Robotics management, first in 1996 to use the robot in the stone, the only company with patented systems.
Nowadays T&D Robotics is present in 34 Countries and five continents.
Our systems have been installed in all artistic fields : Carving, restoration, sculpture, architecture, modern art.
Countertop with single cells up to full automatic processing plants with multiple robots, resin application , cutting and handling are the others filed where we are present.
Type : T&D Robotics on youtube
Italy
T&D Robotics S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesEdge Profiling, Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone
Machinery Function Features:
COMET - EDGE POLISHER BELLANI
"Comet" performs the continuous shaping and polishing of profiles either flat and linear or with a regular round shape (such as bullnose, half bullnose and quarter bullnose edges, etc.), shaping of special profiles, calibration, execution of bilateral bevelled edges, drip grooves, wings and slots on horizontally placed, natural and engineered stone workpieces.
A hydraulic power unit actuates the slat conveyor, the 8 polishing spindles (one of which can be equipped with a diamond wheel) and the unit that makes them oscillate so that their service life is longer and faultless even though they work under a jet of water.
comet-bellani
Besides holding 8 edge polishing spindles, "Comet" is equipped with:
• 1 calibrating/grinding spindle to be fitted with the diamond tool suitable to execute one of the following operations (one operation excludes the others):
a) thickness calibration on the lower stripe
b) execution of slots on the edge, mounting a disk on the calibrating tool
c) edge profiling with a diamond wheel
• 2 grinding spindles to prepare the edge before it is shaped with the oscillating spindles
• 1 spindle for the drip groove execution
• 4 chamfering spindles (2 upper and 2 lower spindles)
• 1 spindle for the wing execution
Italy
Breton S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesColumn, Balustrade Lathe Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
KORT LATHE 2 HEADS is perfect for turning balustrades and vases in marble or granite
KORT LATHE 2 HEADS is the ideal machine for the needs of large and small scale production: with its 2 engines it turns 2 balustrades/vases in marble or granite at the same time, in only 1 step, which assures you an excellent quality of the finish
This lathe for turning is the simplest easy-to-use machine you will find on the international market
KORT LATHE 2 HEADS is completely oleo-dynamic and automatic.
TYPOLOGY OF WORKMANSHIPS
TURNING
Working dimension:
400 Øx1000 mm
TECHNICAL DATA
DISK ENGINE POWER:
6,3 kw / 9 Hp each
1400 rpm
Disk housing Ø 400 mm
ROTATING SUPPORTS ROTATION:
1,5 kw / 2 Hp
0 ÷ 140 rpm
SELF-ADJUSTABLE COPYING VALVE KORT
WORKING GROUP:
structure in aluminium
chromate sliding shafts
FRONTAL PANEL WITH SECURITY BLOCK CE
TOTAL POWER:
16 kw / 21 Hp
380 V – 50 Hz
Italy
KORT FORME S.R.L.
Contact Supplier
Have a Question? Ask our expert
Ask now
