Stone Factory Machines in China

STONEWIN Multi-wire saw machine is designed to produce 1.8 / 2 / 3 / 15 cm slabs simultaneously from the same granite or marble block. With the main parts such as columns,transversal beam, cases ... are made of a whole Q355B steel plate after bending and heat treated, it ensure the machine main body solid and stable. The Φ2.2m integral driving wheel drum and Φ880mm guiding wheel drums ensure the stable cutting and accurate slab thickness; and the individual liner bands for the grooves facilitate the maintenance of the machine. STONEWIN Multi-wire saw machine is designed to produce 1.2 / 1.8 / 2 / 3 / ... 15 cm slabs simultaneously from the same granite and marble blocks. With the main parts such as columns, transversal beams, cases ... are made of a whole Q355B steel plate after bending and heat-treated, it ensure the machine main body solid and stable. The Φ2.2m integral driving wheel drum and Φ880mm guiding wheel drums ensure the stable cutting and accurate slab thickness; and the individual liner bands for the grooves facilitate the maintenance of the machine. FUNCTIONS AND FEATURES: The main motor is the latest PMSM (permanent magnet synchronous motor) motor which is power-saving and efficient. Being controlled by two sets of frequency inverters (driver), and applying constant tension control technology, the back-moving speed of the machine can be adjusted automatically according to the changes of the cutting force to ensure the diamond wire saw be in the best cutting condition all the time. With a phase sequence protector, without special requirement for input phase sequence, it doesn’t need to change or distinguish the input-power phase sequence. The machine has the following protection functions: diamond wire broken protection, over-loading protection, phase-failure protection, terminal limit, and so on. The real-time parameters are displayed on the control platform, such as the set current of the main motor, the current and the rotation speed of the main motor, etc. It ensures the operation and adjustment of the machine more convenient. The machine can be operated by manually and automatically. The manual and automatic functions can be shifted from each other. Under the automatic function, the machine can be unattended operated, and one worker is able to operate multiple machines.

Ultra-Thin Multi-Wire Saw - Redefining Efficiency

Trends of Tomorrow, Your next machine for block cutting for much more benefit.

Hualong new multi-wire cutting machine HLMW-100/150 represents a significant leap in the way stone is processed. Using cutting-edge technology and ultra thin diamond wire with 0.35-0.8mm diameter, it's well done to cut marble, granite and ornamental rocks in different thickness efficiently. Thanks to an easy user control system and its patent structure birations free, it allows a longer life of the wire and an unparalleled reliability.

Key Advantage:

1) High yield: 97%+ material utilization with 0.4-0.7mm kerf, 15-20% higher than conventional saws

2) Eco-Friendly: 90% less dust, 40dB noise reduction, 50% energy saving.

3) Ultra-Thin Cutting: Produce slabs below 10mm with 50% better flatness and zero wire marks.

4) Space-Saving: 30% smaller footprint for space-constrained workshops.

The use of such advanced cutting technology means quality, efficiency and profit. This trend also reflects a broader movement towards sustainable practices in the industry. By reducing waste, manufacturers are not only cutting costs but also minimizing their environmental footprint. The efficient use of resources is increasingly important in modern manufacturing, and the stone industry's adoption of this leading technologies is a prime example of this shift.

This machine mainly consists of the following main parts: driving system, tension system, lifting system, trolley system, speed regulation system, sprinkler system, and lubrication system.Its main features as follows:
1. This machine abandons the traditional linear roller system and adopts high precision linear sliding track in an all-round way to ensure the stable operation of the vertical column linear slider during the machining process.
2. This machine adopts the new international digital control technology to provide a comprehensive guarantee for the smooth operation of the equipment.
3. This machine adopts the self-developed tensioning system to ensure the consistency of each wire saw and make the machine run more smoothly.
4. This machine adopts PLC digital control system to realize the modular combination of various parts, display the running status of the equipment in real time through the display screens, and realize the automatic operation by setting the operating parameters you desired.
5. The design of the machine is reasonable, stable operation, convenient operation, small floor space occupied, high processing efficiency, energy saving and environmental protection.
6. Various specifications available to cut different widths of blocks, mainly used for processing large slabs of granite, marble and artificial stone. It is the ideal replacement for sand saws and provides more choices for large-scale processing among various stone enterprises.

THE PERFECT MARRIAGE Combined 5 axis - bridge saw + Waterjet for ceramic, stone, marble and granite

HKNC-450J Sawjet is a 5 axis cnc cutting center with cutting-edge technology that combines the power of waterjets and the precision of diamond saws, which results in a high efficient cutting method that not only enhances accuracy but also significantly reduces material waste.

It's extremely veratile and suitable for processing a wide variety of items made of marble, granite, quartzite , ceramic , other natural and composite stone.

Two Technologies Together

It's a cnc machine optimises cutting operations with:

• Saw blade cut smoothly speedly for straight, big arcs, chamfering and notch on slab surface.


• water jet cut flexibly internal angles, curve and intricate shape.

The machine can also perform milling operations thanks to the tool installed on the main motor shaft.

HKNC-450J sawjet, modular designed, is a five-axis beast tailored to your unique needs, maximizing productivity, and pushing the envelope of what's possilble.

Equipment Details:

1. 1) Italian Esa CNC system and Pegasus software


2. 2) 5 axis brdige saw + 5 axis water jet


3. 3) Easy to use interface with 21.5" large color touch-screen.


4. 4) Camera on board for nesting and bypassing slab defects


5. 5) 1/2 inch connector with internal water supply for finger bits cooling


6. 6) Auto lubrication system


7. 7) Auto-height system for waterjet cutting a constant distance


8. 8) Optional - stone thickness probe & disc measuring station for more accurately machining


9. 9) Optional – auti-collision system for preventing damage to the waterjet nozzle


10. 10) Optional - vacuum manipulator with a lifting capacity of 200 kg.


11. 11) Optional - slab washing device for cleaning wokpieces before vacuum manipulation.


12. 12) Optional - fixing bar to keep workpieces from moving during machining.


13. 13) Optional - vein match for easily matching up perfectly each vein,color at the seam of your project.


14. 14) Optional - quick opening housing or safeguard light curtain


15. 15) Optional - hot galvanised frame and tank for corrosion resistanc

Benefit:

1. * Easy to use interface and software


2. * Almoste limitless cut out by combination head - Saw Blade plus Waterjet


3. * Less waste by accurate programming and optimises cutting


4. * Increased material yield by 10-20%


5. * Hight reliability and minimal maintenance


6. * Small footprint

HLRB-7A3D 7-Axis Robotic Stone CNC Router
Industrial-Grade Solution for High-Precision 3D Stone Carving
CE Certified | KUKA-Based 7-Axis Robotic Arm | Standard & ATC Pro Configurations

Product Overview
The HLRB-7A3D 7-axis robotic stone sculptor revolutionizes monumental art creation and industrial stone processing. Designed for artisans seeking digital precision and factories demanding mass production efficiency, this KUKA-powered stone CNC router transforms raw marble and granite into museum-grade statues, architectural masterpieces, and custom memorials. With AI-assisted 3D modeling and modular automation upgrades, it bridges traditional craftsmanship and Industry 4.0 technology, empowering users to tackle complex human/animal sculptures and large-scale stone installations with unprecedented speed and accuracy.

Precision Engineered for Monumental Artistry
Next-Gen Stone Sculpture Automation

✅ 7-Axis Flexibility - 3100mm reach for large-scale marble/granite artworks
✅ 70,000h MTBF - Industrial durability for 24/7 statue production
✅ SprutCAM AI - Convert 3D models to robot paths in <15 minutes

Core Technology Highlights
1. KUKA-Based 7-Axis Robotic Arm
- German-engineered RV reducers ensure ±0.05mm engraving accuracy
- 360° continuous rotation for complex undercut carving
- IP65-rated for dusty workshop environments

2. Intelligent Sculpture Software
- SprutCAM Robot programming suite preloaded with:
✓ 80+ human/animal statue templates
✓ 3D portrait carving wizard
✓ Granite toolpath optimizer

3. Future-Ready Architecture
- Optional 12-tool ATC upgradeable via modular rail
- IoT-ready ports for automated sculpture production lines

Standard vs Pro Configurations
Choose Your Automation Leve

Capability ---------- Standard ----------- Pro (with ATC)
Tool Management: Single tool manual change --- 12/24 tools auto-swap in 4s
Daily Output: 9 x 50cm statues --- 22 x 50cm statues
Surface Finish: 3 grades (Matte-Satin) --- 7 grades (Matte-Mirror)
Ideal For: Medium reliefs, columns --- Complex 3D sculptures, monuments

Why 7-Axis Beats Traditional CNC in Statue Carving?
① Anatomical Precision
- 0.1mm facial accuracy for portrait statues
- Curved surface continuity <0.5μm (Ideal for marble animal sculptures)

② Production Scalability
- Batch carve 3m tall statues with 7th linear axis
- 68% faster than 5-axis CNC on detailed religious statues

③ Material Versatility
- Processes 280+ stone types from soft limestone to black granite sculptures

ATC Pro Upgrade: Your Path to Full Automation
20-Tool Changer System ($28,500)
▸ 4-Second Bit Swap - RFID tags auto-recognize 63 tool types
▸ 8kg Tool Capacity - Handle heavy diamond cup wheels
▸ Humidity-Controlled - Protect bits in dusty environments

Trust Accelerators
🔧 5-Year Warranty - Covers robotic arm & controller
📜 Certifications - CE, ISO 10218-1, ANSI/RIA R15.06
🌍 Global Proof - 17 ATC systems operationg in 8 countries

Applicable for polishing the surface of granite slabs and tiles.
Automatic polishing machine of newly design, which absorbs the most advanced technology of granite polishing and has created several patent technologies.
Superior material, reasonable structure, completed processing technique, stable performance, high efficiency and energy saving.
Electric parts are of worldwide brand. PLC control system and friendly human
-machine interface via LCD to achieve computerized control.
Automatically detect the slab profile by laser scanning device.
Sensitive collision avoidance of polishing head.

This machine is used for cutting slabs and profiling stone. It can cut different sizes of straight slab, arc slab, solid columns and hollow columns and large-scale stone line, letter etc. We have 3 model QCXE-1500,QCXE-1800,QCXE-2200. QCXE-1500 can cut maximum block heigth 1500mm, QCXE-1800 can cut maximum block heigth 1800mm and QCXE-2200 can cut maxium block heigth 2100mm, this is the main difference, other functions are the same.

The all-new upward model has a high line speed of up to 1600meters per minute and a high tension of up to 500Newton. Old machine renovation, without changing the original foundation and track, saves more costs.

The latest triangle structure technology, higher cutting efficiency, and the stability of running. Designed by the man-machine intelligent system, convenience for operate, and has the full function of perfect production safety. Matching use Skystone multi-wire saw, with the high cutting quality, long life of wire, improve production efficiency and reduce comprehensive cost input. The machine has the advantages of low energy consumption, high versatility of accessories and low comprehensive cost of use and maintenance. The world's top after-sales service, rapid response to customer needs, to provide a complete set of customized cutting process production technical solutions.

This stone splitter is designed for cutting stone bar into individual stones for wall cladding, and stone blocks into cubes for paving stones. Stone splitting machine is suitable for cutting various types of stone, such as granite, marble, limestone, etc. It meets the needs of various scenarios, such as wall paving, road paving, and garden landscaping.

This machine can cut the thickness 150mm maximum (depending on blade size), servel pieces will come out at one time . The cutting output of this machine is 4-6 times of manual cutting output, is absolutely a good helper for stone material in processing Mosaic, the machine is advanced in design, medium brick spindle high precision, spindle end with automatic lifting type fixed structure, high cutting efficiency, good processing effect.

The product is widely used in the stone craft industry. Such as lamps, hotel supplies, glass crafts, various stone decorations, etc, this machine is easy to operate, convenient, and has strong adaptability to the processing objects. It can perform multi-coordinate linkage, and can process crafts with complex shapes.The machine effectively solves complex, precise, small batch and multi-variety processing difficulties. It is a flexible and high-performance automatic machine tool. It is conducive to modern production management to solve a series of headaches such as labor intensity of workers in labor-intensive enterprises and reduction of work-related injuries.

This stone cutting machine adopts PLC microcomputer control, equipped with touch operation screen and manual operation panel and wireless remote control, you can choose to manually or automatically manipulate the machine according to the needs of man-machine dialogue flexible and comfortable. The machine body adopts bridge structure, equipped with double machine heads, each head hangs several saw blades of the same specification. The working table can be rotated from 0 to 90 degrees, and the working order of the machine heads can be flexibly selected according to the needs, so as to achieve the purpose of efficient production of specification boards.

This 5 Axis 3D engraving machine features a high-performance design with advanced 5-axis linkage technology, equipped with high-performance servo motors and precision gearboxes to ensure high accuracy and stability in the engraving process. The machine is equipped with a ±90 degree pendulum head and ±360-degree rotary table, and combined with the RTCP 5-axis control system, it can realise multi-angle flexible processing. It is suitable for relief carving, artwork and other stone precision processing, is the ideal choice for high-end stone carving.

The machine using the gun barrel, the grinding head structure design is reasonable, high efficiency in calibration , Mainly for calibrating the thickness of agate, pebble and material super hard small size product . completely solve the long-term problem on high efficiency of calibration,saving labors, and high processing speed, effectively reduce the cost. Thoroughly solved the long-standing problem of low thickness setting efficiency and difficulty in hiring workers in stone production enterprises, and fast processing speed, effectively reduce costs. it's cycloid needle wheel reducer frequency converter speed adjustment , the rise and fall can be manually added pneumatic or fine adjustment, can control the height of rising and falling of the grinding head accurately,it is accurate thickness setting and high efficiency.

The multi-blade stone cutting machine is an improvement and upgrade based on the infrared bridge cutting machine. It uses PLC to control 7 saw blades to cut stone simultaneously. The host machine can hang up to 7 pieces of 800-diameter saw blades. The work trolley can be rotated 90° to save the cutting process. Greatly improve production efficiency. Heavy-duty beams and higher horsepower motors make multi-piece cutting more comfortable. It is ideal for cutting pavers, curbs, and dimension boards.

Features
1. Six-axis robot, with many joint axes, combined with external rotating axes and moving slides, has higher processing flexibility;
2. Kuka heavy-load, high-precision robot is used, with high processing accuracy and long-term continuous processing;
3. Offline programming software can be used to import 3D models to generate processing programs, reduce programming difficulty and
improve programming efficiency;
4. The overall footprint is small, saving factory space;
5. The robot is easy to ship, and the robot joints can be reduced to a smaller size, which is convenient for transportation and loading, reducing freight costs;
6. Since there are fewer parts to be disassembled during shipment, it is easy to install and debug after receiving the goods.

SQC-450/600/700 (Sliding Plate Type) uses PLC system and human-machine Interface, combined with Ultra-high precision rotary encoder to locate and infrared device,uses inverter to control left-right feeding, adjusts the speed according to the stone material.It uses hydraulic lifting system,main spare parts adopt imported good-quality materials.Thus the whole machine is featured as high cutting effciency,high cutting precision, high stability,easy-operating to suit granite and marble with high value and big size.

Product Description
This kerbstone cutting machine line is mainly for cutting slab width above 50mm, the machine cut with 10-14pcs of blade at the same time which will dramatically increase cutting speed and overal output, daily capacity can reach 30-35m³/24h.The stone edge cutting machine is widely used for kerbstone, roadside stone, cobblestone and tombstone etc.
One-stop solution for curbstone cutting With the rapid growth of the economy, city construction requires higher output and more precision for curbstone cutting. DAFON dedicate to curbstone cutting machine lines for more than 10 years, we provide advanced full-line equipment solutions for curbstone.
Technical Parameters
The whole process of kerbstone production
After cutting the stone height by block cutter, a worker hoisted the material to the curbstone slicing machine, another worker hoisted the curbstone cut along the curbstone cutting machine line to the curbstone chamfering machine for grinding and chamfering, and a third worker unloads and packages the material by a small crane behind the chamfering edger. The entire process requires only three workers to operate, which greatly saves labor costs. The whole production continuity is continuous and the stability is good.
Features
1. The main part of the whole machine is made of integrated cast iron, which is conducive to the stability of the machine when cutting.
2. The main and auxiliary shafts are bidirectionally supported and connected, and the main shaft is more durable and not easy to wear after high-frequency quenching and tempering
3. The main machine adopts bilateral oil cylinder lifting instead of screw lifting, providing strong support for the machine
4. The large-scale trolley can process 2 pieces of 80cm blocks at the same time, and the stones are conveyed by the roller, which greatly improves the work efficiency
5. No need to install cement foundation, simple electric control operation, easy to use
Advantages
1. No foundation needed, easy installation, easy for shipping.
2. It adopts an enlarged trolley, 2 pcs of block can be cut at one time, which can greatly improve output and efficiency.
3. It uses the main spindle and a vice spindle to seal together which can ensure the machine is stable while cutting hard granite.
4. It uses a simple program of movement on the controlling box, easy for setting and handle.
5. A hydraulic system is adopted on the machine

Installation
1. Put the machine on the prepared ground.
2. Put several pieces of wood as thick as 50mm on the worktable to prevent blades from cutting into the worktable.
3. Install water pipe.
4. Blade installation: Open blade cover, unscrew 8 retaining bolts and position bolts with a dedicated spanner, loosen auxiliary spindle (shaft), put on blades and clamping plates as per intended stone size (thickness), align oil hole of the auxiliary spindle to air hole according to the arrow direction on auxiliary spindle and box, have them fixed with bolts, close blade cover.
5. Check transmission fluids of the spindle box, auxiliary spindle box, trolley track, and lifting parts.
6. Connect control cabinet power.
One-stop solution for curbstone cutting With the rapid growth of the economy, city construction requires higher output and more precision for curbstone cutting. DAFON dedicate to curbstone cutting machine lines for more than 10 years, we provide advanced full-line equipment solutions for curbstone.

Machine model : SQC2500-4D

Max.processing length : 2500mm

Max.processing width : 3800mm

Max.lifting stroke : 2200mm

Water consumption : 15³/h

Power of main motor : 45kw

Total power : 56kw

Dimension(L*W*H) : 8000*4400*3700mm

Weight : 14000kg

a. Tiny wire saws with only 0.5~0.7mm cutting groove brings yield rate up to 97%.
b. The machine main structure is made by castings to ensure stable operation and zero structural deformation.
c. The machine equips a set of advanced servo system, securing smooth and reliable performance.
d. The main motor adopts a direct-drive structure, enabling precise and controllable operation during the machine's running process.
e. With less cutting vibration to avoid edge breakage, the machine can produce Ultra-thin slabs below 10mm.
f. Convenient grooving can satisfy various slab thicknesses requirements.

5 Axis CNC Bridge Saw
The machine is an integrated five-axis bridge cutting machine, for the different specifications of the plateand a variety of special-shaped copying processing(such as polygon, triangle, fan, countertop, oval,diamond, circle, rim of horse's belly, chamfer at anyangle, special-shaped copying and engraving). lt has the advantages of fast speed, high cutting precision, simple and intelligent operation, suitable for cutting slab, marble, granite, quartz stone, and other stone processing. lt is the first choice of project and stone processing enterprises.

5 Axis CNC Bridge Saw
The machine is an integrated five-axis bridge cutting machine, for the different specifications of the plateand a variety of special-shaped copying processing(such as polygon, triangle, fan, countertop, oval,diamond, circle, rim of horse's belly, chamfer at anyangle, special-shaped copying and engraving). lt has the advantages of fast speed, high cutting precision, simple and intelligent operation, suitable for cutting slab, marble, granite, quartz stone, and other stone processing. lt is the first choice of project and stone processing enterprises.

hydraulic italy pump

MODEL: UXD-A
DIMENSIONS: 8800*650*1900mm
PACK SIZE: 5800*6500*1900mm
THICKNESS: 40mm
LIFTING CAPACITY: 5T
NET WEIGHT: 3200kg

U Shape Handler C

Advantages of this waterjet cutter

1. The smooth cutting quality is flawless.

2. Cutting precision reaches up to 0.1mm. Edge joints are uniform, and the water-cooled cutting system enables intricate jigsaw puzzles and murals.

3. Cutting speed is exceptionally fast, with outstanding product consistency and interchangeability.

4. Drilling, cutting, and forming can be performed simultaneously in a single operation.

5. Improves the work environment by reducing dust and noise exposure for operators.

6. Cold cutting process preserves material integrity without damaging internal structure.

7. Capable of processing composite materials and fragile ceramics.

8. Cutting tools handle metals, rubber, foam, plastics, composites, stone, ceramic tiles, marble, glass, and more.

Regarding dimensions, we offer 4000*2000mm, 3000*2000mm, 2000*1500mm, 2500*1500mm, 6000*2000mm, etc.

350bar italy pump

500bar italy pump and gun

5 Axis Bridge cutting machine adopt 5 Axis linkage CNC system Control, Bus-based absolute value servo(with memory function for power off). high-precision linear guide rail, ball screw transmission, oil-immersed track structure, with multi-function, high precision, strong stability and other advantages. Its processing functions include: arbitrary-shaped lines, fan-shaped plates, small space, and simpleoperation. It is a great equipment for stone processing.

With the support of five axis CNC system, the machine coordinates X, Y, Z and A, B rotation axes at the same time, so that the water jet cutting head can swing in any direction. When cutting, the computer calculates the material density and thickness of the workpiece in real time, and controls the cutter head to run along the cutting track, so as to realize the three-dimensional cutting of the workpiece with complex shape, such as cutting inclined plane, chamfering, and cutting high-precision conic surface, arc surface and other complex space surfaces. So that the water knife to achieve higher performance and bring better benefits to users.
Cutting advantages:
1. Strong versatility, almost all materials can be cut.
2. The water jet is cold cutting, which does not produce thermal effect, deformation, slag, ablation and change the physical and chemical properties of materials.
3. Small slotting and cooling cutting can improve material utilization.
4. The cutting medium is only water and natural abrasive, and no other substances are produced in the cutting process. It is a clean and environmental protection cutting process.
5. After cutting, the cutting surface is neat and smooth, and there will be no damage to the cut object in the cutting process, which can play a role in many cutting operations that cannot be realized by cutting tools.
Water jet has a wide range of applications, from metal materials to non-metal materials, from natural materials to artificial materials, from food to daily necessities, basically can cut, has the "universal cutting machine" reputation.
Machinable materials:
Water knife is known as "universal cutting machine", which can cut almost any kind of material, such as steel, alloy, stone, ceramics, ceramic tiles, glass, aluminum, and other materials. Of course, some materials that can't be cut for their own reasons, such as tempered glass.
The main application fields are as follows:
1. Ceramic, stone and other building materials processing;
2. Glass products processing, such as home electrical products in glass parts cutting, building decoration, process glass;
3. Metal plate cutting and blanking in machinery industry;
4. Advertising industry signs, art pattern cutting

1. Our company adopts Italian advanced design and electric control system, combined with domestic and foreign markets, developed for granite slab automatic continuous polishing machine, using ordinary resin abrasive disk or triangle plastic.
2. The machine with modern design, generous appearance, stable performance, advanced operation control system, low failure rate, high efficiency and low consumption. Suitable for continuous polishing granite slab.
3. A complete set of equipment’s raw materials with high quality cast steel, Electrical components, motor and speed reducer adopts Japan, Germany brands or domestic well-known brands.
4. The whole equipment is equipped with an automatic flap frame, automatic slab device, blow-dry device and transition frame. PLC control system, LCD touch screen terminal for man-machine interface to set parameters, equipment operation process with troubleshooting tips and automatic lubricating reminder system.
5. Slab conveyor belt, work speed of the transverse beam is controlled by frequency converter; polishing heads’ work pressure, the grinding width of the slab is adjustable within the set point. Automatic identification of slab shape, polishing heads lifting automatically according to the slab shape. The spindle system adopts an advanced sliding sleeve lifting structure. The performance reached the domestic leading level.

Combined with the domestic market demand, the machine adopts domestic advanced design scheme and automatic control system, and the whole machine has stable performance, high output and low failure rate.

This machine major in cutting slabs and profiling granite and marble. It can cut different sizes of straight slab, arc slab, solid columns and hollow columns and large-scale stone line, letter etc

Introduction
This equipment adopts an integrated body for easy installation and movement, the beam adopts integrated casting, standard with frequency converter to achieve infinitely variable speed cutting, and the voltage
regulator to ensure the stability of precision electronic components, reduce the electronic components failure due to unstable voltage. x, y, and z axis are used in the linear guide walking more silky smooth, suitable for stone finishing, chamfering splicing, and so on, as well as the table panel cutting.
Features
Easy Handling： Adopting PLC programmable control system (optional CNC system) and human-machine
interactive operation interface, easy to operate.
High Cutting Accuracy： Adopting high precision linear guide rail with P6 grade high precision grinding
beveled teeth to ensure the precision and quality of cutting.
Low Energy Consumption： Adopting high-efficiency energy-saving motor, with the same output, energy
consumption is lower, and the comprehensive cost can be reduced by about 15%~20%.
Good Stability： Equipment motors, bearings, hydraulic accessories, etc. are used in domestic and foreign first-line brands, more stable operation.
High Flexibility： The equipment adopts an integrated body, beam beam-integrated casting, the overall rigidity is good,
and the head can be rotated and tilted to meet different cutting needs.

This stone splitting machine is a highly efficient equipment designed for split square column stone into pieces of cubes or blocks with a rustic appearance.The manual feed design makes the operation more flexible and is suitable for stone processing needs of different sizes and shapes. The stone splitter has strong structure and high cutting precision, which is the ideal choice for producing cubic paving stones.

Description The latest 5+1 CNC bridge saw machine can cut and trim granite, marble, artificial stone, slate and other stones at any angle and shape. The key parts of the machine are imported high-quality accessories, and the system adopts the ltalian ESA system, which has fast and stable operation. The corresponding servo and touch display are also the same brand as EsA. The system can also be customized with Blue Elephant customized system. Features 1. The A axis can automatically rotate 0-90°, while the C axis can rotate up to 360° 2. The slab can be positioned by taking photos, in addition, this machine can automatically plan the cutting path directly from the generated map, great)improving processing efficiency. 3. The overturned worktable is adopted, which has large overturning weight redundancy, up to 85°. 4. The ltalian servo motor is used to complete circular cutting, square cutting, fan cutting, oval cutting, 45" bevel cutting, drilling, outer edge polishing, etc.

CNC Monoblock Bridge Saw Machine R&D Background
The 5-axis CNC bridge saw can achieve cutting of various shapes, but compared with the 3-axis and 4-axis stone cutting machines, it is expensive and the general processing factory has an insufficient budget.
Therefore, dafon machinery has added a milling cutter on the basis of the 4-axis stone cutting machine, which can be professionally used for drilling and cutting of countertops. It is the best choice for drilling and cutting countertops such as granite, marble, and quartz stone.

Introduction of CNC Monoblock Bridge Saw Machine
Bridge saw machines are more cost-effective than five-axis cutting machines. This is a new type of machine developed by Dafeng Machinery. Mainly processing washbasin countertops, circles, rectangles and other conventional shapes. It is equipped with a cutting head and engraving head that can rotate 45-90 degrees. Compared with the conventional 4-axis stone cutter, it has more complete functions and can process the table faster, more accurately, and more efficiently.

Features of CNC Monoblock Bridge Saw Machine
High cutting accuracy: multi-angle cutting, straight lines, and curves can be achieved to improve cutting accuracy.
High cutting efficiency: cutting of complex shapes can be achieved, thereby improving cutting efficiency.
Wide range of applications: can cut various stone materials, including marble, granite, jade, etc.
High-cost performance: Compared with the 5-axis CNC bridge saw, the price is more attractive, and compared with the 4-axis stone cutter, the cutting function is more comprehensive

Technical parameters for block cutter：
Technical data
main motor power 37-55kw
total motor power 40-48kw
beam size 500*600*7500mm
blade size 1600-2500mm
max vertical stroke 1100mm
max processing length 4000mm
max processing width 2200mm
water consumption 8.5m³/h
machine size and weight 7800*4500*6500mm, 12T
We provide customization products please contact our sales with detailed requirements, we will manufacture machines accordingly:
Special customization size:
Crossbeam length: 6500-10500mm
Side beam length:4500-8000mm
Features:
The bridge cutting machine is mainly for granite and marble, it adopts multidisc and PLC programmable control and man-machine interface, combined with a super-precision rotary encoder for slicing, uses frequency converter to control left-right feeding and adjusts the speed according to the stone material. It adopts a hydraulic lifting system and forward-backward slicing adopts high-precision screw nut driving, automatic slicing, main spare parts adopt imported good-quality materials. The block can be placed on the ground directly, saving the cost of trolley and maintenance. It is especially suitable for cutting high-value granite and marble block because of its high-efficiency cutting rate, high precision slicing, flatness, stability, and easy operation.
Production process:
1. Customer need to prepare two sides foundation first withdrawing provided by us
2. Install machine and blades
3. Machine cut
4. take down the slab from blocks one by one, we can make a mold to support the slab, a machine can cut directly to the end and the slab will not fall apart
5. Trolley is optional according to customers’ requirement
After-sales service
We provide skilled and rich experience technicians for installation and after-sale service
Machine details:
Blade: two ways of blade combination
1. Big-medium-small combination
2. Big-small combination
The Hi-win liner guide is optional as per the customer
Packaging & Shipping
The machine will be consolidated tightly and safely within the container and delivered by sea or railway, we offer fast delivery and prompt reaction.

Irregular stone veneer saw cutting machine for flate cut
thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistency, efficiency, and reliability.

Functional Characteristics of Dual-Head Engraving Machines
A dual-head engraving machine is an efficient CNC device with two collaborative or independent engraving heads, widely used in woodworking, stone, metal, acrylic, and advertising fields. Its core features focus on efficiency, versatility, and precision:
I. Core Operation Modes
Independent Work: Two heads can use different tools/parameters to process the same or different workpieces simultaneously (e.g., one cutting contours, the other carving patterns), nearly doubling efficiency in batch production.
Collaborative Work: Heads cooperate on complex tasks, such as segmented engraving of large workpieces or rough/fine machining, reducing repositioning time.
II. Enhanced Efficiency
Batch Processing: Simultaneous processing of two workpieces shortens production cycles.
Reduced Auxiliary Time: Integrates multiple processes (e.g., drilling + engraving) to minimize clamping/tool change time.
III. Versatile Processing
Multi-Material Compatibility: Handles wood, stone, metal, acrylic, etc., with heads configurable for specific materials.
Multi-Task Support: Enables 2D/3D engraving, cutting, drilling, and milling—e.g., one head carves text, the other cuts contours in advertising production.
IV. Precision Control
High-Precision Components: Linear guides and servo motors ensure ±0.01mm positioning accuracy.
Synchronized Motion: Advanced CNC systems prevent offset in symmetric/cooperative patterns.
V. Intelligent & Reliable
User-Friendly Interface: Easy parameter setting and task simulation to avoid collisions.
Safety Features: Overload protection, emergency stop, and tool breakage detection ensure stability.
Ideal for boosting productivity and expanding capabilities in diverse manufacturing sectors.

5 axis CNC stone cutting bridge saw adopts an automatic computer control system, which can realize manual programming or CNC programming and other programming methods to automatically complete cutting operations. It can conveniently perform horizontal cutting, longitudinal cutting, arc cutting, elliptical cutting, round cutting, arbitrary angle cutting, concave-convex edging, shaped cutting, special-shaped processing and more occasions with powerful functions.

5 Axis Bridge Saw

5 axis CNC bridge saw is an automatic stone machining equipment that can complete the processing of pentahedron special-shaped curved surfaces at one time through five-axis linkage control, that is, three linear moving axes and two rotating axes.

It is a type of Automatic CNC Machine tailor-made for the majority of stone fabricators by IGOLDENCNC in order to meet the cutting plans of stone machining manufacturers. It has various processing modes of cutting, milling, engraving, and drilling. The bridge saw features with multiple functions, small footprint, simple operation, precise cutting, quick and convenient conversion of different functions.

Durable

Good quality steel is used as the mechanical parts and reliable electric parts are used to guarantee high reliability & durability.

Multifunctional

It can do chamfer cut, straight cut, arc cut, arc cutting, shape cut, milling, drilling, line cut, and edging. With optional sensor, profiling function can be added.

User-Friendly

Automatic touch screen cutcam system,Professional CNC system, easy to set and machining, touch control, simple operation.

Precise

Magnetic ruler is adopted for slicing measure.

Laser device for accurate alignment.

2.1. Suitable for a wider range of product specifications, allowing for flexible and easy adjustment of cutting thickness.

2.2. Due to the increased cutting speed, water, electricity, and wire usage are approximately doubled compared to traditional first-generation models, reducing production costs and significantly improving economic benefits.

2.3. The yield rate is increased to 97%, generating an additional 30,000 yuan in profit for each block cut (based on mid-range marble costing 500 yuan per square meter).

2.4. We have a 24-hour service center in Shuitou Town, with sufficient spare parts and a technical team readily available. No matter which model you choose, we guarantee: no problems will be resolved overnight, and we will provide service at your workshop! We are always customer-oriented, continuously optimizing product performance, and committed to creating greater value for our customers. Our wire saw products have been widely used and recognized in the market, helping numerous stone companies improve production efficiency and economic benefits